Post on 04-Jul-2018
transcript
We work for your success
Bright Steel
Stainless Steel | Bright Bars
Strips | Coils | Blanks
Rolled Steel
Tubes
Perforated Plates
Aluminium
Piston Rods | Cylinder Tubes ROLLED STEEL
2
YOUR BASE PRODUCT – ROLLED STEEL IN MANY VARIETIES
The range of uses for our rolled steel products, bar steel and heavy plates, is exceptionally broad. We stock a wide range of bar steel and hot rolled steel sheets as well as tear drop plates and hot rolled coils. Thus, the bar steel product line includes the qualities S235JR and S355J2 also grade S235JR and CE45E galvanised. Whether it is strip-, fl at-, universal-, angle, square- or round bar steel, T-sections or U-sections as well as Cold Rolled U-Sections - we have it! In total we have more than 1,000 dimensions, which are stored in a modern bar storage system. Nevertheless, should you be in need of something, that we do not stock, we are in the position to supply you with this product, because we have been working together for many years with reputable manufacturers. In addition, we can offer you descaling, priming and bench sawing. Our hot rolled sheet range includes the grades S235JR and S355JR, as well as micro-alloyed fi ne-grained steel in grades S355MC to S700MC. We offer all grades also in pickled and oiled. In addition to the traditional warehouse formats, we can also cut the hot rolled coils to length, specifi ed by you. Furthermore we provide hot rolled steel plates with a broad range of qualities and thicknesses as drop shipments with a very short delivery time.
3
BESTSELLER – SHEETS FROM STOCK
Our thin sheets are so even and have such a close tolerance that they are especially suitable for modern canting,blanking and laser technologies. They are used in mechanical engineering, air conditioning and systems techno-logy, as well as fi lter and ventilation systems. We store EG material exclusively on nailed wooden pallets (with paper and/or fi lm packaging). If you have a bar storage sytem, we can transfer the material to your steel pallets. Whether single sheets, complete batches, small, medium, large or special formats, we will be pleased to process your order.
4
SHEETS
Stock - SheetsDimensions DC 01 greased DC 01 ungreased DX 51 galvanised DC 01 ZE elec.
galv.DX 51 alu zinc
0.75 x 1,000 x 2,000 mm • • •
0.75 x 1,250 x 2,000 mm •
0.75 x 1,250 x 2,500 mm • •
0.75 x 1,500 x 3,000 mm •
0.88 x 1,000 x 2,000 mm • •
0.88 x 1,250 x 2,000 mm •
0.88 x 1,250 x 2,500 mm •
0.88 x 1,500 x 2,000 mm •
0.88 x 1,500 x 3,000 mm •
1.00 x 1,000 x 2,000 mm • • • •
1.00 x 1,250 x 2,000 mm •
1.00 x 1,250 x 2,500 mm • • • •
1,00 x 1,500 x 2,000 mm •
1.00 x 1,500 x 3,000 mm • • • •
1.25 x 1,000 x 2,000 mm • • • •
1.25 x 1,250 x 2,500 mm • • • •
1.25 x 1,500 x 3,000 mm • • •
1.50 x 1,000 x 2,000 mm • • • • •
1.50 x 1,250 x 2,500 mm • • • • •
1.50 x 1,500 x 3,000 mm • • • •
2.00 x 1,000 x 2,000 mm • • • • •
2.00 x 1,250 x 2,500 mm • • • • •
2.00 x 1,500 x 3,000 mm • • • •
2.50 x 1,000 x 2,000 mm • • • •
2.50 x 1,250 x 2,500 mm • • •
2.50 x 1,500 x 3,000 mm • •
3.00 x 1,000 x 2,000 mm • • • •
3.00 x 1,250 x 2,500 mm • • • •
3.00 x 1,500 x 3,000 mm • • • •
4.00 x 1,000 x 2,000 mm •
4.00 x 1,250 x 2,500 mm •
4.00 x 1,500 x 3,000 mm •
5
MATERIAL QUALITIES | FORMATS
Material qualitiesProduct group Thickness Steel standard
Cold-rolled non-coated steelsDC 01
0.75 - 2.99 mm EN 10130
Hot-dip galvanised steelsDX 51 D + Z
0.75 - 4.00 mm EN 10327
Electrolytically galvanised steelsDC 01 ZE
0.75 - 2.99 mm EN 10152
Aluzink steelDX 51 D + AZ
1.50 - 2.00 mm EN 10215
Formats1,000 x 2,000 Small format
1,250 x 2,500 Medium format
1,500 x 3,000 Large format
Fixed sizes on demand
6
SHEETS | STRIPS
As we are continuously expanding our range, you are welcome to enquire about non-listed dimensions.
Due to our excellent contacts to the mills we can offer you a broad range of heavy plates in different thicknesses and qualities within short delivery times via third-party business. We can also offer you different formats from 15 – 100 mm from stock.
Sheets – grade DD 11
EN 10111 / 10051
hot rolled, pickled and oiled, laser cut qualitymm 1.50 2.00 2.50 2.99
1,000 x 2,000 • • • •
1,250 x 2,500 • • • •
1,500 x 3,000 • • • •
1,000 - 1,500 mm width x desired length for all above-mentioned strengths from coil stock.
Strips – grade S235JR / DD 11
EN 10025 / 10111 / 10051
hot rolled, pickled and oiled, laser cut qualitymm 4 5 6 8 10 12
1,000 x 2,000 • • • • • •
1,250 x 2,500 • • • • • •
1,500 x 3,000 • • • • • •
1,000 - 1,500 mm width x desired length for all above-mentioned strengths from coil stock.
Strips – grade S235JR / S355JREN 10051 / 10025
hot rolled, laser cut qualitymm 3 4 5 6 8 10 12 15 20
1,000 x 2,000 • • • • • • • • •
1,250 x 2,500 • • • • • • • • •
1,500 x 3,000 • • • • • • • • •
2,000 x 3,000 • • • • • • • • •
2,000 x 4,000 • • • • • • • • •
2,000 x 6,000 • • • • • • • • •
1,000 - 2,000 mm width x desired length for all above-mentioned strengths from coil stock.All dimensions can be offered in pickled and greased.
7
STRIPS | SHEETS
Strips – grade S355MC / S600MCEN 10149 / 10051
hot rolled, laser cut quality1,000 - 2,000 mm width x desired length for all below-mentioned strengths from coil stock,
mm 3 4 5 6 8 10 12 15 20
1,000 x 2,000 • • • • • • • • •
1,250 x 2,500 • • • • • • • • •
1,500 x 3,000 • • • • • • • • •
2,000 x 4,000 • • • • • • • • •
2,000 x 6,000 • • • • • • • • •
All dimensions can be offered in pickled and greased,
Sheets – grade S235 JRDIN 59220 / EN 10025
hot rolled, with teardrops1,000 - 2,000 mm width x desired length for all below-mentioned strengths from coil stock,
mm 3 4 5 6 8 10 12 15
1,000 x 2,000 • • • • • • • •
1,250 x 2,500 • • • • • • • •
1,500 x 3,000 • • • • • • • •
2,000 x 6,000 • • • • • • • •
Strips – grade S700MC
EN 10149 / 10051
hot rolled, laser cut qualitymm 3 4 5 6 8 10 12
1,250 x 2,500 • • • • • •
1,500 x 3,000 • • • • • •
All dimensions can be offered in pickled and greased,
8
STEEL BARS | FLAT BARS
Flat bars – app. 6 m production lengthgrade S235JR black
mm 5 6 8 10 12 15 20 25 30 40 50
15 • • •
16 • •
20 • • • • • •
25 • • • • • •
30 • • • • • • •
35 • • • • • • • •
40 • • • • • • • • •
45 • • • • • •
50 • • • • • • • • •
60 • • • • • • • • • •
70 • • • • • • • • • • •
75 • • • • • • • •
80 • • • • • • • • • • •
90 • • • • • • • • • • •
100 • • • • • • • • • •
110 • • • • •
120 • • • • • • •
130 • • • • •
140 • • • • • • •
150 • • • • • • • • •
Steel barsGrades
S235 JR black EN 10025
S235 JR galvanised EN 10025
S355J2 EN 10025
C45E EN 10083-2
Product groups
Flat bars EN 10058
Universal fl ats DIN 59200
Flat bars EN 10058
Round bars EN 10060
T-bars EN 10055
Square bars EN 10059
Angle bars EN 10056
Channels EN 10279
Cold Rolled Steel Sections in bars EN 10162
As we are continuously expanding our range, you are welcome to enquire about non-listed dimensions.
9
UNIVERSAL FLATS | FLAT BARS | ROUND BARS
Universal fl ats – app. 6 m production lengthgrade S235JR black
mm 5 6 8 10 12 15 20 25 30
160 • • • • • • • • •
170 • •
180 • • • • • • • • •
190 • •
200 • • • • • • • • •
220 • • • • • • •
240 • • • • • • •
250 • • • • • • •
260 • • • •
280 • • • •
300 • • • • • • •
350 • • •
400 • • • • • •
Flat bars – app. 6 m production lengthgrade S235JR black
mm 3 4 5 6
15 • •
16 •
20 • •
25 • •
30 • •
35 • •
40 • •
50 • •
60 • •
70 • •
80 • •
110 • •
120 • •
130 • •
140 • •
150 • •
Round bars 6 - 25 mm – app. 6 m production lengthgrade S235JR black
6 8 10 12 14 15 16 18 19 20 22 24 25
• • • • • • ▲ • • ▲ • ▲ •
▲= also 8 m production length
Round bars 26 - 100 mm – app. 6 m production lengthgrade S235JR black
26 27 28 30 35 36 40 42 50 60 70 80 90 100
• • • ▲ • • • • • • • • • •
▲= also 8 m production length
10
CHANNELS | COLD ROLLED U-SECTIONS | T-BARS | ANGLES
Channels – app. 6 m production lengthgrade S235JR black
30 40 40/20 50 50/25 60 65 80 100 120 140
• • • • • • • • • • •
T-Bars – app. 6 m production lengthgrade S235JR black
20 25 30 35 40 45 50 60 70 80 90 100 120 140
• • • • • • • • • ■ ■ ■ ■ ■
• = app. 6 m production length ■ = also 12 m production length
Angles (continued on following page)grade S235JR black
mm 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 24
20 x 20 • •
25 x 25 • • •
30 x 20 • •
30 x 30 • • •
35 x 35 • • •
40 x 20 • •
40 x 40 • ■ • •
45 x 430 • •
45 x 45 • •
50 x 30 ■
50 x 40 •
50 x 50 • ■ • • • •
60 x 30 • •
60 x 40 • • •
60 x 60 • ■ ■ •
65 x 50 ■ •
65 x 65 •
70 x 70 ■ ■
75 x 50 • • •
75 x 55 • •
75 x 75 •
80 x 40 ■ ■
80 x 65 ■ ■ ■
80 x 80 ■ ■ •
90 x 60 ■ ■
90 x 90 ■ ■
100 x 50 ■ ■ ■
100 x 65 ■ ■ ■
100 x 75 ■ ■ ■
100 x 100 ■ ■ ■ ■
110 x 110 ■ ■
• = app. 6 m production length ■ = also 12 m production length
Cold Rolled U-Sections- app. 6 m production lengthgrade S235JR EN 10025/10162
mm
3 40 x 20 40 x 40 46 x 45
4 40 x 35 50 x 40 54 x 45 62 x 45 70 x 50 80 x 50 100 x 50
5 80 x 50 100 x 50
6 120 x 60 140 x 60 160 x 65 200 x 80
11
ANGLES | SQUARE- | FLAT- | ROUND- | T-BARS
Angles (continuation)grade S235JR black
mm 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 24
120 x 80 ■ ■ ■
120 x 120 ■ ■ ■ ■
130 x 65 ■ ■
130 x 130 ■ ■
140 x 140 ■
150 x 75 ■ ■
150 x 90 ■ ■
150 x 100 ■ ■ ■
150 x 150 ■ ■ ■
160 x 80 ■ ■
160 x 160 ■ ■
180 x 90 ■ ■
180 x 180 ■ ■
200 x 100 ■ ■ ■ ■
200 x 200 ■ ■ ■ ■
250 x 90 ■ ■ ■ ■
• = app. 6 m production length ■ = also 12 m production length
Square bars – app. 6 m production lengthgrade S235JR black
6 8 10 12 13 14 15 16 18 20 25 30 35 40 50 60 80 100
• • • • • • • • • • • • • • • • • •
Flat bars – app. 6 m production lengthgrade S235JR galvanised
mm 5 6 8 10
20 •
25 •
30 • • • •
35 •
40 • • • •
50 • • • •
60 • • • •
70 • • •
80 • • •
100 • • • •
120 •
150 •
Round bars – app. 6 m production lengthgrade S235JR galvanised
pp ppp p
8 10 12 14 16 18 20
• • • • • • •
T-Bars – app. 6 m production lengthgrade S235JR galvanised
25 30 35 40 45 50 60
• • • • • • •
12
CHANNELS | ANGLES
Channels – app. 6 m production lengthgrade S235JR galvanised
40 40/20 50 50/25 60 65
• • • • • •
Channels – app. 12 m production lengthgrade S235JR galvanised
80 100 120 140 160
■ ■ ■ ■ ■
Anglesgrade S235JR galvanised
mm 3 4 5 6 7 8 9 10 11
20 x 20 •
25 x 25 •
30 x 30 • •
35 x 35 •
40 x 20 • •
40 x 40 • •
45 x 30 •
45 x 45 •
50 x 30 •
50 x 50 ■
60 x 30 •
60 x 40 •
60 x 60 ■
70 x 70 ■
75 x 50 •
80 x 40 ■
80 x 65 ■
80 x 80 ■
90 x 60 ■ ■
90 x 90 ■
100 x 50 ■ ■
100 x 65 ■
100 x 75 ■ ■
100 x 100 ■ ■
120 x 80 ■ ■
120 x 120 ■
130 x 65 ■
150 x 100 ■
160 x 80 ■
180 x 90 ■
200 x 100 ■
• = app. 6 m production length ■ = also 12 m production length
13
FLAT BARS | UNIVERSAL FLATS
Flat bars | Universal fl atsgrade S355J2
mm 5 6 8 10 12 15 20 25 30 35 40 50 60
20 • • • •
25 • • • •
30 • • • • • • •
40 • • • • • • • • •
50 • • • • • • • •■ ■
60 • • • • • • • • •■
•
70 • • • • • • • •■
•
75 • • •
80 • • • • • • • • • •
90 • • • • • •
100 • • • • • • • • • • • •
110 • • • • • • • • •
120 • • • • • • • • • •
130 • • • • • •
140 • • • • • • • • •
150 • • • • • • • • • •
160 • • • • • •
180 • • • • • • • • •
200 • • • • • • • • •
220 • • • • • • •
240 • • • • • •
250 • • • • • •
300 • • • • • •
350 • • • • • •
400 • • • • • •
500 • • • • • •
• = app. 6 m production length ■ = also 12 m production length
Flat barsgrade C45E
mm 8 10 12 15 20 25 30 40 50
50 • • • • •
60 • • • •
70 • • • • • •
80 • • • • • • • •
90 • • • • • • • •
100 • • • • • • • •
14
ROUND BARS | SQUARE BARS | T-STEEL | ANGLES
Round bars – app. 6 m production lengthgrade S355J212 16 20 24 25 27 28 30 32 40 45 50 60 65 70 80 100 110 120 130
• • • • • • • • • • • • • • • • • • • •
Square bars – app. 6 m production lengthgrade S355J2
30 40 50 60 70 80 100 120 150
• • ■ ■ ■ • ■ • •
■ = also 12 m production length
T-Steel – app. 12 m production lengthgrade S355J2
80 100 120 140
■ ■ ■ ■
Angles – app. 12 m production lengthgrade S355J2
mm 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 22 24 28
50 x 50 ■
60 x 40 ■ ■
60 x 60 ■ ■ ■
70 x 70 ■ ■
75 x 50 ■
80 x 40 ■ ■
80 x 80 ■ ■
90 x 60 ■ ■
90 x 90 ■ ■
100 x 50 ■ ■ ■
100 x 65 ■
100 x 75 ■
100 x 100 ■ ■ ■
110 x 110 ■ ■
120 x 80 ■ ■ ■
120 x 120 ■ ■ ■
130 x 65 ■ ■
130 x 130 ■
140 x 140 ■
150 x 75 ■ ■
150 x 90 ■ ■
150 x 100 ■ ■ ■
150 x 150 ■ ■ ■
160 x 80 ■ ■
160 x 160 ■ ■
180 x 90 ■ ■
180 x 180 ■ ■ ■
200 x 100 ■ ■ ■ ■
200 x 200 ■ ■ ■ ■ ■
250 x 90 ■ ■ ■
250 x 250 ■ ■ ■ ■
Jan MarquardtTel + 49 202 562-268
Fax + 49 202 562-444268
Olga TimermaneTel + 49 202 562-102
Fax + 49 202 562-444102
Verkauf StabstahlHarald BloemenTel + 49 202 562-176
Fax + 49 202 562-444176
Simone EmmelTel + 49 202 562-225
Fax + 49 202 562-444225
Miroslav Michalski (Hbv)Tel + 49 202 562-224
Fax + 49 202 562-444224
Svenja SchönenbergTel + 49 202 562-170
Fax + 49 202 562-444170
E-Mail: 1. Buchstabe Vorname.Nachname@holzrichter-stahl.deBeispiel:r.schmitt@holzrichter-stahl.deä=ae, ü=ue, ö=oe, ß=ss
Jochen KaiserTel + 49 202 562-175
Fax + 49 202 562-444175
Rainer Schmitt (Prokurist)Tel + 49 202 562-228Fax + 49 202 562-444228
Verkauf BlecheHarald BloemenTel + 49 202 562-176Fax + 49 202 562-444176
Katrin BöckmannTel + 49 202 562-268Fax + 49 202 562-444268
Marcel DreisbachTel + 49 202 562-227Fax + 49 202 562-444227
Bernhard KretschmannTel + 49 202 562-281Fax + 49 202 562-444281
Konrad KusberTel + 49 202 562-112Fax + 49 202 562-444112
Heike LademacherTel + 49 202 562-208Fax + 49 202 562-444208
Johanna LasokTel + 49 202 562-229Fax + 49 202 562-444229
Melina PalumboTel + 49 202 562-172Fax + 49 202 562-444172
Olga TimermaneTel + 49 202 562-102Fax + 49 202 562-444102
Verkauf StabstahlJochen KaiserTel + 49 202 562-175Fax + 49 202 562-444175
Janine KötherTel + 49 202 562173Fax + 49 202 562444173
Miroslaw Michalski (Hbv)Tel + 49 202 562-224Fax + 49 202 562-444224
Tanja MickelsTel + 49 202 562-170Fax + 49 202 562-444170
Nadine StarkTel + 49 202 562-135Fax + 49 202 562-444135
Verkauf Walzstahl StreckeStephan Doert (Hbv)Tel + 49 202 562-230Fax + 49 202 562-444230
Simone EmmelTel + 49 202 562-225Fax + 49 202 562-444225
E-Mail: 1.Buchstabe Vorname.Nachname@holzrichter-stahl.deBeispiel:r.schmitt@holzrichter-stahl.deä=ae, ü=ue, ö=oe, ß=ss
Rainer Schmitt (Prokurist)Tel + 49 202 562-228Fax + 49 202 562-444228
Verkauf BlecheStephan Doert (Hbv)Tel + 49 202 562-230Fax + 49 202 562-444230
Bernhard KretschmannTel + 49 202 562-281Fax + 49 202 562-444281
Konrad KusberTel + 49 202 562-112Fax + 49 202 562-444112
Heike LademacherTel + 49 202 562-208Fax + 49 202 562-444208
Jan MarquardtTel + 49 202 562-268Fax + 49 202 562-444268
Olga TimermaneTel + 49 202 562-102Fax + 49 202 562-444102
Verkauf StabstahlHarald BloemenTel + 49 202 562-176Fax + 49 202 562-444176
Simone EmmelTel + 49 202 562-225Fax + 49 202 562-444225
Miroslav Michalski (Hbv)Tel + 49 202 562-224Fax + 49 202 562-444224
Svenja SchönenbergTel + 49 202 562-170Fax + 49 202 562-444170
E-Mail: 1. Buchstabe Vorname.Nachname@holzrichter-stahl.deBeispiel:r.schmitt@holzrichter-stahl.deä=ae, ü=ue, ö=oe, ß=ss
Jochen KaiserTel + 49 202 562-175Fax + 49 202 562-444175
DIN EN ISO 9001:2008 CERT.NO 171616CC1-2015-AQ-GER-DAKKS-DNV-GL
We are quality assured and have been certifi ed
in wholesaling, including storage and processing,
since 1993.
Peter Holzrichter GmbH
Schönebecker Platz 11
42283 WuppertalTel +49 202 562-0
Fax +49 202 562-278
info@holzrichter-stahl.dewww.holzrichter-stahl.de
Supply and dispatch warehouse
Schwerte
Im Heiligen Feld 958239 Schwerte-GeiseckeTel +49 2304 9667-0
Fax +49 2304 9667-136
Bright Steel
Stainless Steel | Bright Bars
Strips | Coils | Blanks
Rolled Steel
Tubes
Perforated Plates
Aluminium
Piston Rods | Cylinder Tubes
Stephan Doert (Assistant Manager)Tel +49 202 562 - 230
Fax +49 202 562 - 444230
Simone HölterTel +49 202 562 - 225
Fax +49 202 562 - 444225
Jennifer KnuthTel +49 202 562 - 173
Fax +49 202 562 - 444173
Bernhard KretschmannTel +49 202 562 - 281
Fax +49 202 562 - 444281
Bettina KrigsTel +49 202 562 - 135
Fax +49 202 562 - 444135
Konrad KusberTel +49 202 562 - 112
Fax +49 202 562 - 444112
Heike LademacherTel +49 202 562 - 208
Fax +49 202 562 - 444208
Miroslaw Michalski (Assistant Manager)Tel +49 202 562 - 224
Fax +49 202 562 - 444224
Olga TimermaneTel +49 202 562 - 102
Fax +49 202 562 - 444102
Dajana WoitzikTel +49 202 562 - 129
Fax +49 202 562 - 444129
E-Mail: 1. Letter First Name.Lastname@holzrichter-stahl.deExample:s.doert@holzrichter-stahl.deä=ae ü=ue ö=oe ß=ss