Building Enclosure Fundamentals and Best Practices for Wood … · 2018-12-17 · 2 of 63 Building...

transcript

2 of 63

Building Enclosure Fundamentals and Best Practices for Wood-Frame Buildings

COLIN SHANE M.ENG., P.ENG. ASSOCIATE, SENIOR PROJECT MANAGER

RDH BUILDING SCIENCES INC.

Disclaimer: This presentation was developed by a third party and is not funded by WoodWorks or the Softwood Lumber Board.

SEPTEMBER 16, 2015

“The Wood Products Council” is a Registered Provider with The American Institute of Architects Continuing Education Systems (AIA/CES), Provider #G516. Credit(s) earned on completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.

This course is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. __________________________________

Questions related to specific materials, methods, and services will be addressed at the conclusion of this presentation.

This presentation is protected by US and International Copyright laws. Reproduction, distribution, display and use of the presentation without written

permission of the speaker is prohibited.

Copyright Materials

Course Description

!  Through a combination of building science fundamentals and current research, this presentation will explore design considerations associated with wood-frame building enclosures. Discussion will focus on best practices for designing durable, energy-efficient enclosures for mid-rise buildings using traditional light wood-frame construction. Differences in enclosure design associated with taller wood-frame buildings using mass timber products will also be reviewed.

Learning Objectives

!  Review building science fundamentals and building enclosure design considerations for light wood-frame buildings.

!  Discuss best practices for light wood-frame building enclosure design, detailing, and construction techniques

!  Explore the thermal benefits of utilizing wood-frame construction. !  Compare the differences in building enclosure design criteria and

systematic approaches between light wood-frame structures and tall, mass timber-frame structures.

7 of 97

Basics

BACKGROUND

Low-slope Roofs

Steep-slope Roofs

BEST PRACTICES

Deep Energy Retrofit

CASE STUDIES

Roadmap

8 of 63

Wood-frame Building Enclosure Design Guides

!  2011 Building Enclosure Design

Guide – Wood-frame Multi-Unit

Residential Buildings

!  Emphasis on best practices,

moisture and new energy codes

!  2013 Guide for Designing Energy-

Efficient Building Enclosures

!  Focus on highly insulated wood-

frame assemblies to meet current

and upcoming energy codes

! CLT Handbook

10 of 63

!  Separate indoors from outdoors, by controlling: !  Heat flow

!  Air flow

!  Vapor diffusion

!  Water penetration

!  Condensation

!  Light and solar radiation

!  Noise, fire, and smoke

!  While at the same time: !  Transferring structural loads

!  Being durable and maintainable

!  Being economical & constructible

!  Looking good!

Building Enclosure Design Fundamentals

11 of 63

Trends in Building Enclosure Design

!  Trend towards more energy efficiently building enclosures

!  Air barriers now required in 2012 IECC and 2013 CEC

!  Continuous insulation becoming more common

!  Seeing more new building materials, enclosure assemblies and

construction techniques

!  More insulation = less heat flow to dry out moisture !  “Marginal” assemblies that worked in the past may no longer

work !  Amount, type and placement of insulations matters, for vapor, air

and moisture control

!  Need to fully understand the science and interaction of design parameters

12 of 97

What do we know?

Building Enclosure

Control Air

Control Vapor

Control heat

Control Rain

13 of 63 13

Building Enclosure Control Layers

14 of 63

Basics

BACKGROUND

Low-slope Roofs

Steep-slope Roofs

BEST PRACTICES

CASE STUDIES

Roadmap

15 of 97

!  3 Conditions for Rain Penetration:

1.  A source of water 2.  A water entry path 3.  A driving force

!  4 Ways to Control it:

1.  Deflection 2.  Drainage 3.  Drying 4.  Durability

Rain Penetration Control

16 of 63

How do Walls get Wet and Dry?

18 of 63

Water Penetration Control Strategies

19 of 63

Rainscreen Cladding

20 of 63

Basics

BACKGROUND

Low-slope Roofs

Steep-slope Roofs

BEST PRACTICES

CASE STUDIES

Roadmap

21 of 63

! Code requirement

! Moisture !  Air holds moisture that can be

transported and deposited

within assemblies.

! Energy !  Unintentional airflow through

the building enclosure can

account for as much as 50% of

the space heat loss/gain in

buildings.

Air Penetration Control – Why?

22 of 63

Air Barrier Systems

! Air Barrier Systems Must: !  Be continuous, airtight, durable

!  Resist structural loads

!  Bridge joints across inter-story

and drift joints

!  Not negatively affect drying

ability

! Traditional loose sheet applied house-wrap products are challenging to make air-tight on larger buildings

23 of 63

Types of Air Barrier Systems

Sealed Gypsum Sheathing – Sealant Filler at Joints

Loose Sheet Applied Membrane – Taped Joints & Strapping

Liquid Applied – Silicone sealants and silicone membrane at Joints

Sealed Plywood Sheathing –Sealant & Membrane at Joints

Sealed Sheathing – Membrane at Joints

Self-Adhered vapor permeable membrane

Plywood sheathing with taped joints (good tape)

25 of 63

Airtightness Does Not Happen By Accident

26 of 63

How to Tell the Membrane is Not the Air Barrier

27 of 63

Definitely Not An Air Barrier… But What Is?

28 of 63

Definitely Not An Air Barrier… But What Is?

29 of 63

Importance of Testing Air Barrier Systems

30 of 63

Basics

BACKGROUND

Low-slope Roofs

Steep-slope Roofs

BEST PRACTICES

CASE STUDIES

Roadmap

31 of 63

Conductive Heat Loss Control

!  Insulation between studs is most common heat control strategy

! Need to consider effective R-values

! Continuous insulation on exterior becoming more common

32 of 63

Wood Framing Factor Impact on Effective R-values

” o.c

”o/c

33 of 97

Insulation Placement

!  Consider effective thermal resistance

34 of 97

Cladding Attachment Through Exterior Insulation

35 of 63

Cladding Attachment through Exterior Insulation

Longer cladding Fasteners directly through rigid insulation (up to 2” for light claddings)

Long screws through vertical strapping and rigid insulation creates truss (8”+) – short cladding fasteners into vertical strapping Rigid shear block type

connection through insulation, cladding to vertical strapping

36 of 63

Thermally Improved Performance

Continuous metal Z-girts

Fiberglass Clips & Hat-Tracks

37 of 63

Basics

BACKGROUND

Low-slope Roofs

Steep-slope Roofs

BEST PRACTICES

CASE STUDIES

Roadmap

39 of 97

The ‘Perfect’ Assembly

!  Rain penetration control: rainscreen cladding

over water barrier

!  Air leakage control: robust air barrier system

!  Heat control: continuous insulation layer

!  Locate all barriers exterior of structure

!  Keep structure warm and dry

!  50+ year old concept!

40 of 97

Wood-Frame Assemblies – ‘Perfect’ Wall

41 of 97

Wood-Frame Assemblies – ‘Perfect’ Roof

42 of 97

Wood-Frame Assemblies – ‘Perfect’ Roof

43 of 63

Wall-to-Roof Detail

44 of 97

Wall-to-Roof Detail

45 of 63

Details – Continuity of Control Layers

!  In practice, need to evaluate and design assemblies and details that are not ‘perfect’

! Continuity of control layers within and between assemblies is critical

! Hygrothermal analysis

47 of 63

Basics

BACKGROUND

Low-slope Roofs

Steep-slope Roofs

BEST PRACTICES

CASE STUDIES

Roadmap

48 of 63

Cross Laminated Timber – Ronald McDonald House

49 of 97

CLT – Construction Moisture

!  Keep it dry during construction – as best as possible

50 of 63

! Structural connections can interfere with air-barrier membrane installation/sequencing and sharp parts can damage materials (applied before or after)

CLT – Air Barrier Considerations

51 of 63

CLT – Unique Details for Consideration

52 of 63

CLT Panel Details Requiring Attention

Sealants, tapes, & membranes applied on either side can’t address this type of airflow path through the CLT lumber gaps

55 of 63

CLT – Wall Assemblies

57 of 63

Roof Assembly

R-40+ Conventional Roof Assembly – 2 ply SBS, 4” Stonewool, 4” Polyiso, Protection board, Tapered EPS (0-8”), Torch applied Air/Vapor Barrier(Temporary Roof), ¾” Plywood, Ventilated Space (To Indoors), CLT Roof Panel Structure (Intermittent)

58 of 63

! Get the architect to take the final photos

CLT Considerations

59 of 63

Basics

BACKGROUND

Low-slope Roofs

Steep-slope Roofs

BEST PRACTICES

CASE STUDIES

Roadmap

60 of 63

!  Moisture damage at walls and windows

!  Concealed barrier stucco

cladding

!  Vented low-slope roof

assembly

!  Energy efficient

rehabilitation of wall, window, and roof

assemblies

61 of 63

5-Storey Wood-frame w/ Exterior Insulation

63 of 63

New Exterior Wall Assembly

64 of 63

New Sloped Roof / Overhang Assembly

65 of 63

New Low-Slope Roof Assembly

66 of 63

Completed Building Enclosure

67 of 97

Summary

!  Control moisture, air, and heat

!  Best practices: !  Rainscreen cladding !  Keep structure warm and dry:

control layers on exterior

!  ‘Less than perfect’ practices: !  Analyze and understand

hygothermal behaviour

!  Provide continuity of control layers

within and between assemblies and

details

This concludes The American Institute of Architects Continuing Education Systems Course

Joe Piñon – jpinon@rdh.com Colin Shane – cshane@rdh.com Brian Hubbs – bhubbs@rdh.com www.rdh.com

69 of 63

!  rdh.com

Discussion + Questions

Colin Shane – cshane@rdh.com

70 of 63

!  Tallest wood structure in North America

!  Cross Laminated Timber

panel construction

!  Next project will be 18

storeys

Wood Innovation Design Center

71 of 63

Wood Innovation Design Center

Design & Architectural Renders: Michael Green Architecture (MGA)

Building Enclosure Fundamentals and Best Practices for Wood … · 2018-12-17 · 2 of 63 Building...

Documents