Post on 27-Nov-2014
transcript
MZUMBE UNIVERSITY
FACULTY OF COMMERCE
Department of Procurement and Logistics Management
TERM PAPER
Differentiating between Traditional and Total Quality Management views of
Quality and Identifying three requirements for quality improvement Strategy
PREPARED BY: FRANSISKO T. MASHIMBI [Reg. No. 3131/T.10]
PROGRAMME: MSc. [procurement and Supply Chain Management]
YEAR: 2010/2011
SUBJECT: Strategic Business Management
CODE: BUS 520
SEMESTER: 1
LECTURER: MNZAVA, J.A.
JANUARY, 2011
TABLE OF CONTENTS
Abstract................................................................................................................................ i
1.0 Introduction.............................................................................................................. 11.1 Defining Quality........................................................................................... 11.2 Why is Quality Important............................................................................. 11.3 Total Quality Management........................................................................... 21.4 Quality Assurance Vs Quality Control......................................................... 21.5 Total Quality Management Vs Six Sigma.................................................... 31.6 Background of Japan’s Quality Movement.................................................. 31.7 Deming’s Fourteen Points Plan for TQM..................................................... 4
2.0 Differences Between traditional and Total Quality Management Views................. 72.1 Definition of Quality..................................................................................... 72.2 Productivity Vs Quality................................................................................. 72.3 Quality Measurement.....................................................................................72.4 Quality Achievement..................................................................................... 82.5 Responsibity for Quality............................................................................... 82.6 Organizational Structures.............................................................................. 82.7 Role of People............................................................................................... 92.8 Participation in Quality Improvement Processes.......................................... 92.9 Quality Assurance and Checking.................................................................. 92.10 Thoughts and Decision Making..................................................................... 102.11 Decision Making Tools..................................................................................102.12 Leadership and Performance Control............................................................ 102.13 Acting Proactively rather than reactively...................................................... 102.14 Focus on Profit.............................................................................................. 112.15 Perception on Technology and Global Quality............................................. 112.16 Supplier relationship...................................................................................... 11
3.0 Requirements for Quality Improvement Strategy.................................................... 123.1 Customer View Point................................................................................... 123.2 Personnel responsibility for Quality............................................................. 123.3 Information for Plan, Control and Evaluation in implementing strategy..... 14
4.0 Benefits of Total Quality Management.................................................................... 155.0 Challenges facing TQM........................................................................................... 156.0 Conclusion................................................................................................................. 167.0 Reference.................................................................................................................. 17
Appendix-Total Quality Management Implementation Model
1
ABSTRACT
Total Quality Management (TQM) realizes that the key to improving quality is to improve
processes that define, produce and support an organization’s end product or service. TQM
involves a change from a traditional attitude toward quality. Thus, this paper focuses on
identifying the difference between traditional and TQM views of quality.
The first part of the paper gives an introduction of TQM and quality as a whole. The second
part states the difference of TQM from traditional views of quality. The third part identifies
the three requirements for quality improvement strategy. The next part states the benefits of
TQM, Challenges of TQM and Conclusion.
With management commitment, employees’ involvement and customer focus, TQM will
enhance quality of goods or services, and hence improving customer satisfaction and
delighting them.
2
1.0 INTRODUCTION
1.1 Defining Quality
Definitions of quality fall into several categories. Some definitions are said to
be user-based: they propose that quality “lies in the eyes of the beholder”.
Marketing people like this approach, and so do customers. To them, higher
quality means better performance, nicer features, and other (sometimes costly)
improvements.
To production managers, quality is manufacturing based. They believe that
quality means conforming to standards and “making it right the first time”.
Yet, a third approach is a product-based definition, which views quality as a
precise and measurable variable.
Generally, quality of a product or service is the degree to which a product or
service meets specifications or meets the customers, needs (Heizer, J. And
Render, B., 1993)
1.2 Why is Quality Important
Quality goods and services are strategically important to the company. In
particular, quality affects a firm in four ways;
Company’s Reputation
An organization can expect its reputation for quality – be it good or
bad- to follow it. Quality will show up in perception about the firm’s
new products, employment practices and supplier relations.
Costs and Market share
Improved quality can lead to increased market share and costs savings.
Improved reliability and conformance means fewer defects and lower
service costs, thus affecting profitability as well
3
Product Liability
The courts increasingly hold everyone in the distribution chain
responsible for a product. Additionally, organizations that design and
produce faulty products or services can be held liable for damages or
injuries resulting from their use.
The International Implications
In this technological age, quality is an international, as well as
corporate concern. For both a company and a country to compete
effectively in the global economy, its products must meet quality and
price expectations.
1.3 Total Quality Management
Total Quality Management refers to a quality emphasis that encompasses the
entire organization, from suppliers to customer. It emphasis a commitment by
management to have a company-wide drive toward excellence in all aspects of
products and services that are important to the customer.
It is an integrative management concept of continually improving the quality
of delivered goods and services through the participation of all levels and
functions of the organization.
It involves a change from a traditional attitude toward quality (Lysons K. &
Farrington B., 2006)
1.4 Quality Assurance versus Quality Control
1.4.1 Quality Assurance
Quality assurance is defined as all those planned and systematic
activities implemented within the quality systems and demonstrated as
needed to provide adequate confidence that an entity will fulfil
requirements for quality. It is concerned with defect prevention, and
thus involving a number of approaches.
4
1.4.2 Quality Control
Quality control is defined as the operational techniques and activities
that are used to fulfil requirements for quality. It is concerned with
defect detection and correction and relates to such activities as
determining where, how and at what intervals inspection should take
place, the collection and analysis of data relating to defects and
determining what corrective action should be taken.
1.5 Total Quality Management versus Six Sigma
Six Sigma is relatively new concepts as compared to Total Quality
Management (TQM). However, when it was conceptualized, it was not
intended to be a replacement for TQM. While TQM has helped many
companies in improving the quality of manufactured goods or services
rendered, 6 Sigma has the potential of delivering even sharper results.
The basic difference between 6 Sigma and TQM is the approach. While TQM
views quality as conformance to internal requirements, 6 Sigma focuses on
improving quality by reducing the number of defects, cycle time and cost
savings.
1.6 Background of Japan’s quality Movement
TQM was not invented in Japan, it was invented in the U.S., but it was used by
the Japanese very effectively in the 1980's and the term has subsequently
become associated with Japanese management principles.
In the 1940s, Japanese products were perceived as cheep, shoddy imitations.
Japanese industrial leaders recognised this problem and aimed to produce
innovative high quality products. They invited a few quality gurus, such as
Deming, Juran, and Feigenbaum to learn how to achieve this aim.
Deming suggested that they can achieve their goal in five years; not many
Japanese believed him. However, they followed his suggestions. Maybe the
Japanese thought it was rude to say that they did not believe Deming. Or
maybe they thought it would be embarrassing if they could not follow his
5
suggestions. Whatever reason it was, they took Deming’s and other gurus’
advice and never looked back.
In the 1950s, quality control and management developed quickly and became
a main theme of Japanese management. The idea of quality did not stop at the
management level. Quality circles started in the early 60s. A quality circle is a
volunteer group of workers who meet and discuss issues to improve any
aspects of workplace, and make presentations to management with their ideas.
In the 1980s to the 1990s, a new phase of quality control and management
began. This became known as Total Quality Management (TQM). Having
observed Japan’s success of employing quality issues, western companies
started to introduce their own quality initiatives. TQM, developed as a catchall
phrase for the broad spectrum of quality-focused strategies, programmes and
techniques during this period, became the centre of focus for the western
quality movement (http://www.allbusiness.com accessed on 27thDec, 2010).
1.7 Deming’s 14 Point Plan for TQM
1. Creating consistency of purpose
Create constancy of purpose toward improvement of the product and
service so as to become competitive, stay in business and provide jobs.
2. Adopting New Philosophy
We are in a new economic age. We no longer need live with
commonly accepted levels of delay, mistake, defective material and
defective workmanship, thus need to promote change.
3. Cease dependence
Cease dependence on mass inspection; require, instead, statistical evidence
that quality is built in. Build quality into product.
4. Improve the quality of incoming materials and services
6
End the practice of awarding business on the basis of a price alone.
Instead, depend on meaningful measures of quality, along with price.
5. Continuous Improvement
Find the problems; constantly improve the system of production and
service. There should be continual reduction of waste and continual
improvement of quality in every activity so as to yield a continual rise in
productivity and a decrease in cost.
6. Institute Training
Institute modern methods of training and education for all. A modern
method of on-the-job training use control charts to determine whether a
worker has been properly trained and is able to perform the job correctly.
Statistical methods must be used to discover when training is complete.
7. Emphasize Leadership
Institute modern methods of supervision. The emphasis of production
supervisors must be to help people to do a better job. Improvement of
quality will automatically improve productivity. Management must prepare
to take immediate action on response from supervisors concerning
problems such as inherited defects, lack of maintenance of machines, poor
tools or fuzzy operational definitions.
8. Drive out Fear
Fear is a barrier to improvement so drive out fear by encouraging effective
two-way communication and other mechanisms that will enable
'everybody to be part of change and to belong to it'. Fear can often be
found at all levels in an organisation: fear of change, fear of the fact that
it may be necessary to learn a better way of working and fear that their
positions might be usurped frequently affect middle and higher
management, whilst on the shop-floor, workers can also fear the effects of
change on their jobs.
9. Break down barriers between Department and Staffs’ areas
7
People in different areas such as research, design, sales, administration and
production must work in teams to tackle problems that may be encountered
with products or service.
10. Stop haranguing workers
Eliminate work standards that prescribe numerical quotas for the
workforce and numerical goals for people in management. Substitute aids
and helpful leadership.
11. Remove barriers to pride in work
Remove the barriers that rob hourly workers, and people in management,
of their right to pride of workmanship. This implies, abolition of the annual
merit rating (appraisal of performance) and of management by objective.
12. Support, help and improve
Eliminate the use of slogans, posters and exhortations for the workforce,
demanding zero defects and new levels of productivity without providing
methods, support and help. Such exhortations only create adversarial
relationships.
13. Institute a vigorous programme of education
This goes with encouraging self-improvement for everyone. What an
organization needs is not just good people; it needs people that are
improving with education.
14. Top management's permanent commitment
Top management's permanent commitment to ever-improving quality and
productivity must be clearly defined and a management structure created
that will continuously take action to follow the preceding 13 points.
(http://.educe.dabsol.co.uk/Quality/Q-Deming.html)
8
2.0 DIFFERENCES BETWEEN TRADITIONAL AND TOTAL QUALITY
MANAGEMENT VIEWS
Some of the contrasting differences between modern Total Quality organizations and
traditional organizations that pre-dated the quality revolution are summarized below;
2.1 Definition of quality
In traditional management, quality is the adherence to internal specifications
and standards. The absence of defects, therefore, defines quality. Inspection of
people’s work by others is necessary to control defects. Innovation is not
required.
In Total Quality Management, quality is defined in the customers’ focus
(externally). So that ultimate decider of the quality is the customer. Fitting to
the customer requirement was the least requirement while delighting them is
the ultimate goal. Thus it is a system involving participation of all levels and
functions of the organization towards customers’ satisfaction and delight.
2.2 Productivity Versus Quality
The traditional view is that productivity and quality are always in conflict, you
cannot have both.
The total quality view is that lasting productivity gains are made only as a
result of quality improvement.
2.3 Quality Measurement
The traditional view is that quality is measured by establishing an acceptable
level of non conformance and measuring against that benchmark.
“Benchmarking is the practice of recognising and examining the best
performance in industry or in the world and using this knowledge as the basis
for improvement in all aspects of business. It involves internal and external
benchmarking. Internal benchmarking is used to identify best practices within
an organization, to compare best practices within the organization, and to
compare current practice over time. Competitive or external benchmarking
9
involves using comparative data between organizations to judge performance
and identify improvements that have proven to be successful in other
organizations.”
The total quality view is that quality is measured by establishing high-
performance benchmarks for customer satisfaction and then continually
improving performance.
2.4 Quality Achievement
The traditional view is that quality is inspected into the product. The total
quality view is that quality is determined by product design and achieved by
effective control techniques.
2.5 Responsibility for Quality
Traditionally people thought bad quality products are due to the workers who
do not perform their job correctly. One of the major differences between total
quality management and traditional management style is the assignment of the
responsibility of the quality to the management. The total quality view is that
80 percent of quality problems are management's fault. Especially
responsibility of the quality goes into the middle level management in the
operational.
2.6 Organizational structures
Traditional management views an enterprise as a collection of separate, highly
specialized individual performers and units, linked within a functional
hierarchy. Lateral connections are made by intermediaries close to the top of
the provinces.
Total Quality Management views the enterprise as a system of interdependent
processes, linked laterally, over time, through a network of collaborating
(internal and external) suppliers and customers. Processes are connected to the
enterprise’s mission and purpose, through a hierarchy of micro and macro
processes. Every process contains sub processes and is itself contained within
10
a higher order process. This structure of processes is repeated throughout the
hierarchy.
2.7 Role of people
Traditional management views people as a commodity, virtually
interchangeable, and to be developed based on the perceived needs of the
enterprise. People are passive contributors, with little autonomy, doing what
they are told and nothing more.
Total Quality Management views people as the enterprise’s true competitive
edge. Leadership provides people with opportunities for personal growth and
development. People take joy and pride through learning and accomplishment,
and enhance the capability of the enterprise to succeed. People are active
contributors, valued for their creativity and intelligence. Every person is a
process manager, presiding over the transformation of inputs to outputs of
greater value to the enterprise and to the consumer.
2.8 Participation in Quality Improvement Processes
Total quality management, unlike traditional management calls for high
amount of team working. It is a strategic system involving teamwork, which is
essential to the success of all businesses. This has caused businesses to work
together to improve their knowledge of recent technology and approaches to
training. These teams provide the necessary momentum to the implementation
process and will propel the system forward, with very less resistance. Total
Quality Management helps to competitively meet the demands of customers
by bringing organizations together with management enabling professionals to
improve customer quality.
2.9 Quality Assurance and Checking
Total Quality Management believes in quality assurance rather than checking
as in Traditional Management. Quality is inbuilt to the system, so that
products are assured to be in good quality. Some decision like narrowing
down the supplier base is total quality management concepts used for this
purpose, which is revolutionary still today.
11
2.10 Thoughts and Decision Making
Unlike traditional Management, Total Quality Management pursues new
strategic thinking and depends on cyclic thinking. It is also continuous;
therefore improvements are small, stable and continuous in nature. This is also
known as Kaizen. These events are used in teambuilding, brain storming and
decision making
2.11 Decision Making Tools
Unlike in traditional management style, total quality management makes
decisions on facts and figures and uses various applicable models. Thus,
problems are identified correctly and therefore solutions are well planned.
2.12 Leadership and Performance Control
Unlike Total Quality Management, the traditional management model of
"management by objectives" emphasizes a chain of command in which
objectives are translated into work standards or quotas. Performance of
employees is guided and evaluated according to numerical goals. As a result,
workers, managers and supervisors get caught up in protecting themselves.
Looking good overshadows a concern for the customer or the organization's
long-term success. Employees, desperate to meet quotas, lose sight of the
larger purpose of work.
2.13 Acting Proactively rather than Reactively
Unlike Traditional Management Style, in Total Quality Management,
organization as a whole needs to work on prevention not correction. So
strengths and weaknesses need to be identified, eliminate chronic waste,
continual learning opportunities and improvement, and have a unity purpose.
These aspects should be applied to all levels of an organization from top to
bottom to the customer.
12
2.14 Focus on Profit
Traditionally managers believed that the only way to increase profits and
decrease overheads was to cut costs at any and all phases of production. They
believed that this was the only way to achieve high profit margins, not taking
into account the added costs of rejects and servicing of faulty products that this
method brought about.
In Total Quality Management, companies are focused on the systematic
management of data of all processes and practices to eliminate waste and
pursue continuous improvement of goods and services to meet and exceed
customer requirements. Six Sigma, as a business strategy, involving
improving, designing, and monitoring process to minimize or eliminate waste
while optimizing satisfaction and increasing financial stability is normally
employed. This enables an organization to achieve a competitive edge over
other competing firms, and hence increasing customer loyalty, sales and profit
margin
2.15 Perception on Technology and Global Quality
Unlike the traditional organizations, organizations with Total Quality
Management get by the increasing speed of revolutionary technology such as
the use of internet and e-business, breaking down previously invisible barriers
hindering cross country trading and thus keeping up to date with global
standards and a worldwide view of quality, contrary to traditional
organizations which view quality on local basis.
2.16 Supplier Relationship
The traditional view is that supplier relationships are short term and cost
driven. The total quality view is that supplier relationships are long term and
quality oriented.
13
3.0 REQUIREMENTS FOR QUALITY IMPROVEMENT STRATEGY
Quality improvement strategy is any intervention aimed at reducing the quality gap in
business practices. It involves the following aspects;
Use of formal models for quality improvement
Establish, monitor and evaluate improvement efforts and outcome
Obtain feedback from customers about their products and use
information for quality improvement
Ensuring customers, suppliers and employees are involved in quality
improvement activities
Optimizing use of information technology
It involves the following aspects;
3.1 A focus on Product Improvement from the Customer’s View Point
Since the organizations depend on their customers, therefore they should
understand current and future customer needs, should meet customer
requirements and try to exceed the expectations of customers. An organization
attains customer focus when all people in the organization know both the
internal and external customers and also what customer requirements must be
met to ensure that both the internal and external customers are satisfied.
The term customer in this context is associated with the concept of quality
chains, which emphases the linkages between suppliers and customers.
3.2 A recognition that Personnel at all levels share responsibility for Product
Quality
The concept of ongoing improvement affects everyone in an organization, at
all levels. It is therefore based on team rather than individual performance.
Thus, while top management provides leadership, continuous improvement is
also understood and implemented at shop floor level. Some consequences of
this principle include:
Provision of leadership from the top
14
Leaders need to be committed and establish unity of purpose and
direction. They should go for creation and maintenance of such an
internal environment, in which people can become fully involved in
achieving the organization's quality objective.
Creation of ‘Quality Culture’ dedicated to continuous improvement
One of the permanent quality objectives of an organization should be
the continual improvement of its overall performance.
Team Work
People at all levels of an organization are the essence of it. Their
complete involvement enables their abilities to be used for the benefit
of the organization.
Adequate Resource Allocation
These include Human resources, Information, Technology and
Finance. In particular, adequate financial resources are required by
identifying sources of funds for training and purchasing and testing
innovative technologies.
Quality Training of Employees
Education and training of staff and leadership about the current
problem, quality improvement tools, the planned change in practice
intervention, and updates as the project progressed are key strategies.
Quality Feedback
Information sharing on implementation of the quality strategy is very
essential at all levels in the organization through ongoing monitoring
and feedback opportunities.
Employee Recognition
15
The successful work of these strategies is dependent upon having
motivated and empowered teams. There are many advantages to basing
the work of the quality improvement strategies on the teamwork of
multidisciplinary teams that would review data and lead change.
Measurement and use of Statistical Concepts
Efforts to improve quality need to be measured to demonstrate
“whether improvement efforts lead to change in the primary end point
in the desired direction.
3.3 Recognition of the importance of implementing a strategy to provide
information to managers about quality processes that enable them to
plan, control and evaluate performance.
Total Quality Management processes, tools and techniques, people
development, teamwork, management system and performance measurement
in implementing and control quality improvement strategy.
Monitoring and controlling the implementation of the strategy includes a
periodic look to see if the organisation is on course. It also includes
consideration of options to get a strategy once derailed back on track.
The above detailed discussed components can be summarized into the
following Key Requirements;
It requires everyone in the company to be completely involved and it
covers all company activities.
It requires that the standards are set by customers, and that all practices
conform to these requirements.
It requires that quality is monitored and controlled for optimum results.
4.0 BENEFITS OF TQM
16
Some benefits of claimed for TQM include:
Improved customer satisfaction
Enhanced quality of goods and services
Reduced waste and inventory with consequential reduced costs
Improved productivity
Reduced product development time
Increased flexibility in meeting market demands
Reduced work-in progress
Improved customer service and delivery times
Better utilisation of human resources.
5.0 CHALLENGES FACING TQM
Despite its importance, TQM has some objections, these include;
Overly zealous advocates of TQM may focus attention on quality even though
other priorities may be important, such as changes in the market.
It creates a cumbersome bureaucracy of councils, committees and
documentation relating to quality
It delegates the determination of quality to quality experts because TQM is a
complicated entity beyond the comprehension of the average employee
Some workers and unions regard TQM as management-by-stress and way of
de-unionising workplaces.
6.0 CONCLUSION
17
Total Quality Management realizes that the key to improving quality is to improve
processes that define, produce and support an organizations end product or service.
Total Quality Management theory realizes that people and the processes in which they
operate are keys in optimal organizational functioning. It recommends that an
organization get processes in control and work with other employees and managers to
identify process problems and eliminate them. It also realizes that managers and/or
supervisors must work on processes by providing training and tool resources, by
measuring and reviewing process performance, and by improving process
performance with the help of those who use the processes. Total quality Management
is all about caring for people sincerely. To get people to care about quality you have
to care about them.
7.0 References
18
Deming’s 14 Points Plan for TQM available at http://.educe.dabsol.co.uk/Quality/Q-
Deming.html accessed on 28th, Dec, 2010
Fraser, J. M. (1996, Jan. 1). Implementing Total Quality, available at
http://www.allbusiness.com/professional-scientific/architectural-engineering/548320-
1.html, accessed on 27th, Dec, 2010
Hunger, J. Davia and Thomas L. Wheelen (1993), Strategic Management, 4th Edition,
Addison-Wesley Publishing Compony Inc. New York.
Lysons K. & Farrington B. (2006); Purchasing and Supply Chain management, 7th
Edition, Prentice Hall, UK
Mnzava J.A, Strategic Business Management Manual (Dec, 2010)
Shojania KG, McDonald KM, Wachter RM, et al (2004). Closing the quality gap: a
critical analysis of quality improvement strategies, Volume 1–Series Overview and
Methodology Technical Review 9 , Rockville.
Stark J. (1998). A few words about TQM, available at
http://www.johnstark.com/fwtqm.html accessed on 27th, Dec, 2010
Thareja P (2008), "Total Quality Organization Thru’ People, Each one is Capable",
FOUNDRY, Vol. XX, No. 4, July/Aug 2008
19