Post on 14-Apr-2018
transcript
7/27/2019 Business Environment 4
1/105
Hossein.H.K Page 1
BUSINESS ENVIRONMENT
UNIT1
BUSINESS AS A SOCIAL SYSTEM
Business is an integral part of social system and it is influenced by other
elements of society which, in term, is affected by the business. Today the whole
society is a business environment.
Davis and Blomstorm point out that in taking an ecological view of
business in a systems relationship with society; three ideas are significant in
addition to the systems idea.
The three ideas are:
1. Values2. Viability3. Public visibility
1. VALUES:
Business like other social institutions, develops certain belief systems and
values for which they stand, and there beliefs and values are a source of
institutional drive. These values drive from a multitude source, such as the mission
of business as a social institution, the nation in which business is located, the type
of industry in which it is active and the nature of employees. These values become
guides foremployees decisions in the interface of business. Second, they become
strong motivators for people in a business.
7/27/2019 Business Environment 4
2/105
Hossein.H.K Page 2
2. VIABILITY
Davis and Blomstorms define viability as the drive to line and grow, to
accomplish the potential not yet reached, and to achieve all that a living system is
capable of becoming. If a business is to be a viable, vigorous, institution insociety, it must initiate its share of forces in its own environment rather than
merely adjust to outside forces. Every business needs a drive and spirit all its own
to make it as a positive actor on the social stage rather than reactor or a reflector.
3. PUBLIC VISIBILITY
The term public visibility refers to the extent that organizations activities
are known to person outside the organization. Public visibility is different from
idea of public image. The term public image refers to what people think about an
organizations act, while are known. The importance of public visibility is that it
subjects business activities to public examination, discussion and judgment.
These are became business is integral part of social system. It is a social
organ to help accomplish the social goals.
INTERNAL AND EXTERNAL ENVIRONMENT OF BUSINESS [TYPES
OF ENVIRONEMTN]
I. INTERNAL ENVIRONMENT FACTORS
1. Value system: The value systems of the founders and those at the helm ofaffairs have important bearing on the choice of business, the mission and
objectives of the organization, business policies and practices. It is a widely
acknowledged fact that the extent to which the value system is shared by all in
organization is an important factor contributing to success.
7/27/2019 Business Environment 4
3/105
Hossein.H.K Page 3
2. Mission and Objectives: The business domain of the company, priorities,direction of the development, business philosophy business policy etc are
guided by the mission and objective of the company.
Example: Ranbaxys thrust in to the foreign markets and developments have beendriven by its missionto become a researcher based international pharmaceutical
company.
3. MANAGEMENT STRUCTURE AND NATUREThe organizational structure, the composition of board of directors, extent
of professionalization of management etc, are important factors influencing
business decisions. Some management structures and styles delay decision makingwhile some other facilitate quick decision making.
The Board of Directors being the highest decision making body which sets
the direction for the development of the organization and which oversees the
performance of organization, the quality of the Board is a very critical factor for
the development and performance of company.
4. INTERNAL POWER RELATIONFactors like the amount of support the top management enjoys from the
different levels of employees, share holders, and Board of Directors have
important influence on the decision and their implementation. The relationship
between the members of the board and between chief executive and the Board are
also critical factors.
5. HUMAN RESOURCESThe characteristics of the human resources like skill, quality, morale,
commitment, attitude etc., could contribute to the strength and weakness of the
organization.
7/27/2019 Business Environment 4
4/105
Hossein.H.K Page 4
6. COMPANY IMAGE AND BRAND EQUITYThe image of the company matters while raising finance, forming joint
ventures or other alliances, soliciting marketing intermediaries, entering purchase
on sale contracts, launching new products etc. Brand equity is also relevant inseveral of these cases.
7. OTHER FACTORSA) Research and development determine a companys ability to innovate and
compete.
B) Marketingquality of marketing men, brand equity, distribution networkhave direct effect on marketing.
C) FINANCE 0 financial policies; financial position and capital structure arealso affecting business performances.
D) Physical Assetsproduction capacity, technology, distribution logistics
EXTERNAL ENVIRONMENT FACTORS
It consists of 2 types.
1. Micro environment2. Macro environment
I. Micro Environment
The micro environment is also known as the task environment and
operating environment became the micro environment forces have a direct bearing
on the operations of the firm.
These include the factors like
1. SUPPLIERS
An important force in the micro environment of a company is the suppliers,
i.e. those who supply the inputs like raw materials and components to the
7/27/2019 Business Environment 4
5/105
Hossein.H.K Page 5
company. The importance of reliable source of supply is for the smooth
functioning of business.
It is very risky to depend on a single supplier became of skills, lock out orany other production problem with that supplier may seriously affect the company.
Hence multisource of supply often helps reduce risks.
2. CUSTOMERS
A business exist only became and its customers. A company may have
different categories of customers like individuals, households, industries and other
commercial establishment and govt. and other institution.
3. COMPETITORS
A firms competitors include not only other firms which market the same
products but also all those who compete for the discretionary income of the
consumers.
4. MARKETING INTERMEDIARIES
The immediate environment of the company may consist of number of
marketing intermediaries which are firms that aid the company in promoting,
selling and distributing its goods to final buyers.
The marketing intermediaries includes middlemen such as agents and
merchants who help the company find customers or close sales with them.
5. FINANCIERS
Another important micro environmental factor is the financier of the
company. Besides the financing capabilities, their policies and strategies, attitudes,
ability to provide non financial assistance etc are very important.
7/27/2019 Business Environment 4
6/105
Hossein.H.K Page 6
6. PUBLICS
A public is any group that has an actual or potential interest in an impact
on an organizations ability to achieve its interests. Media publics, citizen action
publics and local publics are some examples.
MACRO ENVIRONMENT
It is also called as general environment and remote environment. The macro
environment is generally uncontrollable than micro environment, the success of
the company depends on its adaptability to the environment.
The important macro environment factors as follows:
I. TECHNOLOGICAL ENVIRONMENT
Technology is one of the important determinants of success of a firm as
well as economic and social development of nation. It includes both hardware and
software to solve problems and promote progress.
1. Innovative dri ve of company
The term innovation means introduction of new product, the use of new
method of production. The technical, industrial and commercial steps which leads
to marketing of new products and to commercial use of new technical process and
equipment.
2. Customers Needs / Expectation
Technological orientation and R&D effects of a company may also be
influenced by the customer needs and expectation. In several cases the customer
and the supplier have a collaborative relationship to develop the product or
solutions. If the customers are highly demanding, companies would be compelled
to be innovative.
7/27/2019 Business Environment 4
7/105
Hossein.H.K Page 7
3. Demand condi tions
The size of demand influences the choice of the technology . The size of
demand influences the choice of the technological scale. Fast growing trend of
demand would encourage development of technology of large scale.
4. Suppliers offering
Many times technological changes are encouraged by the suppliers of a
company, like a capital goods supplier etc.
5. Competiti ve dynamics
Competition compels the adoption of the best technology and constant
endeavor to innovate.
6. Substi tutes
Emergence of new substitutes or technological improvements or substitutes
which alter technological change.
7. Social forces
Certain social forces like pretext against environment pollution or other
ecological problems demand for eco-friendly products.
8.Research organizationThe technological environment of business is enriched by researched
organizations which develops new technologies and provide other technical inputs.
9.Govt. poli cyThe govt. contributes to the development to the technology by its own
direct involvement by establishing research organization and funding R & D. The
govt. may encourage private R & D by various incentives.
7/27/2019 Business Environment 4
8/105
Hossein.H.K Page 8
II. DEMOGRAPHIC ENVIRONMENT
The importance of demographic factors to business is clear from the facts
that Management is men & Market is people. i.e., Management in Men,Material, Machinery and Money, and market is people in the sense that the
demand depends on the people and their characteristics the number, income
levels, tastes and preferences, beliefs, attitudes and sentiments.
Important demographic bases of market segmentation include the
following:
1. Age structure2. Gender3. Income distribution4. Family size5. Occupation6. Education7. Social class8. Religion9. Race10.Nationality
Demographic factors such as size of population, growth rate, age
composition, ethnic, density of population, rural urban distribution, nature of
family have very significant implication for business.
III. ECONOMIC ENVIRONMENT
Business partners and strategies are influenced by the economic
characteristics. The economic environment includes the structure and nature of the
7/27/2019 Business Environment 4
9/105
Hossein.H.K Page 9
economy, the stage of development of economy, economic resources, level of
income, global economic linkages, economic policies etc.
1. Nature of the EconomyThe general level of development of the economy has lot of implication for
businessit has significant bearing on the nature and size demand, govt. policies
affecting business. The widely used method of classification of the economies is
on the basis of per capita income. Accordingly the low income, middle and high
income economies.
Low income economies are economies with very low per capita income.
High income economies are economies with very rich income per capita. Middle
income economies are sub divided into lower middle and upper middle income
where income per capita is neither very high nor low.
2. Structure of the economy
Factors such as contribution of different structure like primary
(agricultural), secondary (industrial) & tertiary (secondary) sectors, large,
medicine, small sectors to economy. These factors and the nature of each sector
have business implication. For example, India is one of the largest producers of
agricultural products, because of the small and fragmented nature of land holdings,
efficient collection and processing of products become difficult. The land holding
pattern also makes productivity improvements difficult.
3. Economic policies
There are several economic policies which can have very great impact on
business. Important economic policies are
7/27/2019 Business Environment 4
10/105
Hossein.H.K Page 10
a) Industrial policy
It defines the scope and role of different sectors like private, public, joint
and cooperative. It may influence the location of industrial undertakings. Choice
of technology, state of operation, product mixes etc.
b) Trade policy
It can affect the fortunes of firms. For example a policy of protecting the
home industry may greatly help the import competing industries, while liberation
of the impart policy may create difficulties for such industries. This mean the firm
should come up with quality, cost, and marketing and after sales service etc.
c) Foreign exchange policy
Exchange rate policy and policy in respect of cross border movement of
capita are important for business.
d) Foreign investment and technology policy
Foreign investment and technology policy will increase domestic
competition at the same time it would benefit many domestic firms by
permitting global sourcing of capital and technology, by increasing the quantity
and quality of domestic supply of many goods and services.
e) Fiscal policy
Govt. strategy in respect of public expenditure and revenue can have
significant impact on business. The pattern of public expenditure may affect the
develop of industries. Such as govt. often use tax incentives or disincentives to
encourage or discourage certain activities. For ex: when industry suffers from
recession, a reduction of taxes like excise duty or sales tax may help improve the
demand.
7/27/2019 Business Environment 4
11/105
Hossein.H.K Page 11
f) Monetary policy
The central bank, by its policy towards the cost and availability of credit,
can significantly influence savings, investments and consumer spending in
economy. For example 1% reduction in cash reserve ratio will significantlyincrease loan able funds with commercial banking systems.
IV. NATURAL ENVIRONMENT
The natural environment ultimately is the source and support of everything
used by businessevery raw material, energy resource, life sustaining factor etc.
The natural environment determines what can be got done in a society and
how institution can function. Resource availability is the fundamental factor is the
development of business in the society.
Thus geographical and ecological factors, such as natural endowments,
weather and climatic conditions, topographic factors, vocational aspects in the
global context etc., are all relevant to business.
1. Geographical factors: differences in geographical condition betweenmarkets may sometimes call for changes in the market mix. It influences
the location of some industries.
E.g. Industries with material index tend to be located near the raw material
sources.
2. Climatic and weather conditions: It affects the location of certain
industries like cotton textile industry. Topographic factors may affect the demand
pattern in some cases. E.g. in hilly areas Jeeps are greater demand than cars.
7/27/2019 Business Environment 4
12/105
Hossein.H.K Page 12
Weather and climatic factors affect the demand of certain types of products.
E.g. in region where temperature is very high in summer, there is good demand for
desert coolers.
Weather and climatic factors can affect the demand pattern of clothing,
building materials, food, medicines etc. further, weather and climatic conditions
may call for modification to the products, packaging storage conditions etc.
3. Ecological factors: It assumes great importance, the depletion of natural
resources, environmental pollution another disturbance of the ecological balance
have carried great concern, govt. policies aimed as preservation of environment
purity and ecological balance, conservation of non-replenish able resources have
resulted additional responsibilities and problems for business.
CORPORATE SOCIAL RESPONSIBILITY
The important generally accepted responsibilities of the business to
different sections of the society are described below.
1. Responsibility to shareholders
The responsibility of a company to its shareholders, who are owners is a
primary one. The fact that the investments in the business should be recognized.
To protect the interests of the shareholders and to provide a reasonable dividend,
the company has to strengthen and consolidate its position.
2. Responsibility to employees
The success of an organization depends to a very large extent on the morale
of the employees and their whole hearted co-operation.
The responsibility of the organization to the workers include
7/27/2019 Business Environment 4
13/105
Hossein.H.K Page 13
1. The payment of fair wages2. The provision of best possible working condition3.
Establishment of fair working standards and norms
4. The provision of labor welfare facilities to the extent possible and desirable5. Arrangements for proper training and education of the workers6. Reasonable chances and proper system for accomplishment and promotion7. Proper recognition, appreciation and encouragement of special skills and
capabilities of workers.
8. The installation for efficient grievance handling system9. An opportunity for participating in managerial decisions to the extent
desirable.
3. Responsibility to consumers
The customer is the foundation of business and keeps it in existence. It has
been widely recognized that customer satisfaction shall be the key to satisfying the
organizational goals. Some important responsibilities of business to customers are
1. To improve the efficiency of the functioning of business so as to increaseproductivity and reduce prizes, improve quality, smoothen the distribution
system to make goods easily available.
2. To do research and development, to improve quality and introduce better ofnew products.
3. To take the steps to remove the imperfection in the distribution systemincluding black marketing or anti-social elements.
4. To supply goods at reasonable prizes5. To ensure that the product supplied has no adverse effect on the customer.
7/27/2019 Business Environment 4
14/105
Hossein.H.K Page 14
6. To provide sufficient information about the product including adverse effects,risks and care to be taken while using the products.
7. To avoid misleading the customers by improper advertisement.8.
To provide opportunity for being heard and to redress genuine grievances.
9. To understand customer needs and to make necessary measures to satisfy theseneeds.
4. Responsibility to community
A business has a lot of responsibility to the community around its location
and to society. The responsibilities include
1. Taking appropriate steps to prevent environmental pollution and preserveecological balance.
2. Rehabilitating the population displaced by operate of the business3. Assisting in the overall development of locality4. Taking steps to conserve scares resources and developing alternatives5. Improving the efficiency of the business operation6. Contributing to research and development7. Develop of backward areas8. Promotion of small scale industries9. promotion of education and population control10.Contribution to the national effort to build up a better society
7/27/2019 Business Environment 4
15/105
Hossein.H.K Page 15
BUSINESS ETHICS AND CORPORATE SOCIAL RESPONSIBILITY
BUSINESS ETHICS
The term business ethics refers to the system of moral principles and rules
of conduct applied to business. This means that the business should be conducted
according to certain self-recognized moral standards. Business, being a social
organ, shall not conduct itself in a way detrimental to the interests of society and
the business sector itself. A profession is bound by certain ethical principles and
rules of conduct which reflect its responsibility, authority and dignity. The
professionalization of business management, should therefore, be reflected in the
increasing acceptance of business ethics.
NOTE: In the 1930s Rotary International developed the code of ethics that is still
used extensions. It uses 4 questions that are called the 4 way of ethical behavior
for any business forces
Is it truth? Is the fair to all concerned? Will it build goodwill and friendship? Will it be beneficial to all concerned?
LIST OF IMPORTANT ETHICAL PRINCIPLES THAT A BUSINESS
SHOULD FOLLOW:
1. Do not deceive or cheat customers by selling substandard or defective productsby under measurements or by any other means.
2. Do not resort to hoarding, black marketing or profiteering.3. Do not destroy or distort competition
7/27/2019 Business Environment 4
16/105
Hossein.H.K Page 16
4. Ensure sincerity and accuracy in advertising, labeling and packaging.5. Do not tarnish the image of competitors by unfair practices.6. Make accurate business records available to all authorized persons.7.
Pay taxes and discharge other obligation promptly
8. Do not farm cartel agreements, even informal, to control production, price etcto the common detriment.
9. Refrain from secret kickbacks on payoffs to customers, suppliers,administrators, politicians etc.
10.Ensure payment of fair wages to and fair treatment of employees.
ISSUES IN CORPORATE GOVERNANCE
Corporate governance is defined as the process and structures by which
business and affairs of corporate sector is directed and managed. The concept of
corporate governance primarily hinges on complete transparency, integrity and
accountability of the management.
Corporate governance is concerned with the values, vision and visibility. It
is about the value orientation of organization, ethical norms its performances, the
direction of development and visibility of its performances and practices.
Objectives
1. To build up an environment of trust and confidence amongst those havingcompleting and conflicting interest.
2. To enhance shareholders value and protect the interest of other shareholders byenhancing the corporate performances and accountability.
- Transparency- Accountability- Investor protection
7/27/2019 Business Environment 4
17/105
7/27/2019 Business Environment 4
18/105
Hossein.H.K Page 18
3. Entrepreneurial RoleEntrepreneurial role includes establishing and operating business
enterprises and bearing risks. A number of factors such as socio-politicalideologies, dearth of private entrepreneurship, absence of inadequate competition
in certain segments and resultant exploitations of consumers have contributed for
the growth of state owned enterprises.
4. Planning roleState plays an important role as planner.
GLOBAL ENVIRONMENT
Globalization is an attitude of mind which views the entire world as a
single market so that the corporate strategy is based on the dynamics of the global
business environment.
Globalization encompasses the following:
1. Expanding business globally2. Giving up distinction between domestic and foreign market and developing
global outlook of business.
3. To maximize profit4. For growth
Essential conditions for globalization
1. Business freedom: There should not be necessary govt. restriction like importrestriction, foreign investments etc.
2. Facilities: Enterprise can develop globally from home country bare depends onfacilities available like the infrastructural facilities.
7/27/2019 Business Environment 4
19/105
Hossein.H.K Page 19
3. Govt. support: Govt support can encourage globalization, like infrastructuralfacilities, R & D support, financial market reforms.
4. Resources: It decides the ability of firm to globalize. Resourceful companiesmay find it easier to thrust ahead in global market. Resources include finance,
R&D, company and grand image, HR etc.
5. Competitiveness: A firm may drive a competitive advantage from any one ormore of the factors such as low costs and price, product quality, product
differentiation, technology superiority, marketing strength etc.
How to go global?Important foreign market entry strategies
1. Exporting: Exporting the most traditional mode of entering global market.2. Licensing & franchising: It involves minimal commitment of resources and
effort on the part of international marketer, are easy way of entering foreign
markets. Finalizing is a form of licensing in which a parent company grants
another independent entity the right to do business.
3. Contract manufacturing; a company doing international marketing contractswith firms in the foreign countries to manufacture the products while
retaining the responsibility of marketing the product.
4. Management contracting: In this supplier brings together a package of skillsthat will provide an integrated service to clients without risk on owner.
5. Turnkey contractsA turnkey contracts is an agreement by seller to supplya buyer with a facility fully equipped and ready to be operated.
6. Wholly owned manufacturing facilities: It provides the firm with completecontrol over production and quality. It does not have risk in the
development.
7/27/2019 Business Environment 4
20/105
Hossein.H.K Page 20
7. Assembly operations: Assembly facilities in foreign markets are very idealwhen there are economies of scale in the manufacture. When an assembly
operations are labour intensive and labour is cheap in foreign country.
8. Joint ventures: Joint venture is a very common strategy of entering foreignmarket. Any form of association which implies collaboration for more than
a transitory period is a joint venture. A joint venture may brought about by
a foreign investor buying an interest in a local company.
9. Third country location: Third country location is also an entry strategy,when there is no commercial transaction between two nations for some
reasons, a firm in one of their nations which wants to enter the other market
will have to operate third country base.
10.Mergers and acquisitions: It have very good market entry strategy as wellas expansion strategy. It provides instant access to markets and distribution
network.
11.Strategic alliances: It is also used as market entry strategy it is also knownas coalition, this strategy seeks to enhance the long term competitive
advantage of the firm by farming alliance with competitors.
12.Counter trade: It is a form of international trade in which certain export andimport transaction are directly linked with each other.
Types of Mergers
1. Horizontal Merger: Takes place where the two margin companies productssimilar product in the some industry. E.g. in 1998 combination ofChrysler cooperation and similar sense to create Dainles Chrysler.
2. Vertical Merger: Occur when two firms each working at different stages inthe production of the same good combine. E.g. General Motors acquisition
of fisher body company (an auto parts manufacturer).
7/27/2019 Business Environment 4
21/105
Hossein.H.K Page 21
Conglomerate Mergers: takes place when two firms operate in different industries.E.g. Acquisition of Montgomery Ward and Co., (a retailer) by Mobil Oil
Company)
7/27/2019 Business Environment 4
22/105
Hossein.H.K Page 22
UNIT2
ECONOMIC STRUCTURE OF INDIA
Mixed economy of India consists of public and private sector. Policy on the
public sector has been guided by the Industrial Policy Resolutions 1956 and 1991
which gave a strategic role in the economy. India was based agrarian economy
with weak industrial base, low level savings and investments and near essence of
infrastructural facilities.
Public sector
The object of accelerating the pace of eco-development and the political
ideology, gave the public sector a dominant role in the industrial development of
the nation led to rapid growth of the State Owned Enterprises (SOEs) sector in
India.
These enterprises came to cover a wide spectrum of activities in basic
strategic industries like steel, coal, minerals and metals, petroleum, heavy
engineering, chemicals, fertilizers and pharmaceuticals etc., on one hand and
consumer goods, trading and marketing activities, transportation, services,
contracts and consultancy services, tourist service, financial services, development
of small industries etc., on the other.
Objectives:
It was promoted as an instrument for implementation of the govt.s socio-
eco policies.
7/27/2019 Business Environment 4
23/105
Hossein.H.K Page 23
1. To help in the rapid eco growth and development and industrialization of thecountry and create the necessary infrastructure for economic development.
2. To earn return on investment and thus generate resources for development.3.
To promote redistribution on income & wealth
4. To create employment opportunities5. To promote balanced regional development6. To assist the development of small scale and ancillary industries7. To promote import substitution, save and earn foreign exchange for the
economy.
Growth & performance of public enterprise
The Industrial Policy Resolution of 1948 made it clear that the manufacture
of arms and ammunitions, the production & control of atomic energy and the
ownership and management of railway transport would be the exclusive monopoly
of the company. After 6 months industries were coal, iron and steel, aircraft
manufacture, ship building, manufacture of telephone, telegraph and wireless
apparatus, excluding radio receiving sets and mineral oils.
IP of 1956: All the industries of basic & strategic importance or in the
nature of public utility services should be in public sector.
At the beginning of the 1990, public sector was dominant in many
industries. Entire output in case of petroleum, lignite, copper & primary lead,
about 98% of zinc with 90% of coal, more than of steel and aluminium and 1/3rd
of fertilizers.
PSEs as a whole have made huge profits mainly because of the enormous
profits made by several public sector monopolies. Many of the loss making PSE
7/27/2019 Business Environment 4
24/105
Hossein.H.K Page 24
have been either in non-priority sectors or in the sectors where the private sector
has proved to be more efficient.
Why PSE fails?Even though formulation of plan is good.
1. Huge cost, time over runs in project implementation2. Land acquisition3. Procurement of equipment4. Civil work and other imponderable [not able to estimate]5. Locational & investment decisions6. Irrational product mix7. Imposed marketing arrangements8. Foreign financing9. Technology upgradation, inadequate R & D, over manning.
Why PSE?
1. PSE not only for commercialization but to generate employment, promotingbalanced regional development etc.
2. Low return on investment on account of price constraints imposed on certaininfrastructural goods and services of PE.
3. Sick industries taken over by PU.4. Promoted with long gestation period5. Periodical wage revision.
New PS policy:
Policy announced on 24-7-1991 the priority areas of growth.
1. Essential infrastructure goods and services2. Exploration & exploitation of oil and mineral resources
7/27/2019 Business Environment 4
25/105
Hossein.H.K Page 25
3. Technology development & building of manufacturing capabilities, longterm development of economy
4. Manufacture of goods where strategic considerationsPSE-8
1. Arms & ammunition: defence equipment, aircraft2. Atomic energy3. Coal & Lignite4. Mineral oils5. Mining of iron ore, manganese ore, chrome ore, gypsum, sulphur, gold and
diamond.
6. Mining of copper, lead, zinc, tin, molybdenum, wolframite7. Mineral specified in the schedule to the AE (control of production & use)
order 1958.
8. Railway transport
The new industrial policy also indicated that the public sector would
withdraw from the following cases:
1. Industries based on low technology2. Small scale and non strategic areas3. Inefficient and unproductive areas4. Areas with low or zero social responsibility or public purpose5. Areas where private sector has developed sufficient enterprise and
resources
Govt. policies:
1. Bring down govt. equity in all non-strategic PSU to 26% or lower, ifnecessary.
2. Restructure & revive potentially viable PSUs
7/27/2019 Business Environment 4
26/105
Hossein.H.K Page 26
3. Close down PSUs which cannot be revived4. Fully protect the interest of workers
A disinvestment department was also set up.
Public Sector Ratnas
Govt. in 1997 July unfolded its strategy to grant autonomy to come PSUs
on an experimental basis was to select some vanguard PSUs to support them in
their drive to become global giants. After in-depth interministerial discussions.
Nine PSUs were selected. These are Navaratnas.
1. Bharath Heavy Electricals Ltd (BHEL)2. Bharath Petroleum Corporation Ltd (BPCL)3. Hindustan petroleum Corporation Ltd (HPCL)4. Indian Oil Corporation Ltd (IOC)5. Indian Petrochemicals Corporation Ltd (IPCL)6. National Thermal Power Corporation Ltd (NTPCL)7. Oil & Natural Gas Corporation Ltd (ONGC)8. Steel Authority of India Ltd (SAIL)9. Videsh Sanchar Nigam Ltd (VSNL)
GAIL & MTNL were given same status. All these were given freedom to incur.
1. Capital expenditure2. Decide on joint venture3. Set up subsidiaries/officers board4. Enter into technology & strategic alliances5. Raise funds from capital markets (international & domestic)6. Enjoy substantial operations and managerial autonomy
7/27/2019 Business Environment 4
27/105
Hossein.H.K Page 27
7 other PSUs have been given the title ministers.
Private Sector
The Industrial Policy Resolution of 1956 has made it very clear that as an
agency for planned national development, in the context of the countrys
expanding economy, the private sector will have the opportunity to develop &
expand. Outside the schedules of A&B would be undertaken ordinarily through
the initiative and enterprise of the private sector. It was the policy of the state to
encourage the development of these industries in the private sector, in accordance
with the programmed formulated in successive Five Year Plans, by ensuring the
development of transport, power and other services and by appropriate fiscal and
other measures.
The IPR of 1956 has clearly stated that the private sector have necessarily
to fit into the frame work of the social & economic policy of the state and will be
subject to control & regulation in terms of industries (Development & regulation)
Act and other relevant legislation. Private sector is dominant in the FMCG, Capital
Goods Industries.
New IP of July 24, 1991Expands the role of PS due to privatization.
Economic Planning in India: From Mixed to a Market economy.
These are three types of economy. These are the free enterprises/market
economies or capitalist economy and at the other end are the centrally planned
economy or communist countries. In between these two are the mixed economy.
7/27/2019 Business Environment 4
28/105
Hossein.H.K Page 28
1. The communist countries have a centrally planned economic system. Underthis rule, the state owns all the means of production, determines the goals of
production & controls the economy according to a central master plan. No
consumer sovereignty. Consumption plan in a centrally planned economy isdictated by state. Ex: USSR, Chez Republic, Hungary, Poland and China.
2. In b/n capitalist and free market economic system is the mixed economy,under which both public & private sector co-exist as in India. In many
mixed economies, the strategic & other nationally very important industries
are fully owned or dominated by the state.
3. The freedom of PS is the greatest in the market economy.In market economy
a. The factors of production (labour, land, capital) are privately owned.b. Income is in monetary formfrom sale & profitsc. Members have freedom of choice consumption, occupation,
savings and investment.
d. Not planned, controlled and regulated by govt.This is far from real one. Ex: US, Japan, Australia and Canada
Structure of Economy
The contributions of sectors like primary (agri), secondary (industrial) and
tertiary sectors form structure of economy.
As economy develops share of primary sectors in development,
employment & GDP declines. Manufacturing also declines. The service sector is
largest & fast operating sector. They contribute upto 60% of world GDP and is
less in developed countries.
Developing Developed
198070 3.5 3
7/27/2019 Business Environment 4
29/105
Hossein.H.K Page 29
199098 3.7 3.3
The share of service sector increased from 1980 39% to 46% in 2000 in
India. Internationally it has increased 199012%.This indicates decrease in price, increase in quality, increase in
competitiveness of downstream industries.
Economic Planning of India
The pattern of economic development in India is very significantly affected
by govt. planning.
The Planning commission
Planning Commission was set up in 1950 March functions: (i) make
resources available, (ii) Balanced and effective utilization of countrys resources.
National Development Council: It is presided over by PM and is composed of
UCM, CM of States and Union Territories and Members of the Planning
Commission. Union State Ministers are also invited to participate in deliberations.
Secretary of PC acts as secretary of NDC.
Functions; i) To prescribe guidelines,
ii) To consider national plan
iii) To consider important question of social & economic policy
iv) Review working of plans
Formulation of Plans: To prepare five year plan usually spread over a period of 2-
3 years.
Review of the Plans
7/27/2019 Business Environment 4
30/105
Hossein.H.K Page 30
First Five year PlanApril 1st1951
Third Five year plan1966
Fourth got delayed due to disrupted the development process like the aggressionsof China & Pakistan and severe drought in the country.
1965-66Fall income, increase in price, decrease in savings, devaluation of rupee
by 36.5% in June 1966.
4th
Five Year Plan was put off by 3 years. This period had annual plans (66-67, 68-
69). This period is referred to as Plan Holiday.
Central Change: Premature end to five year plan, Janata Party in 1977 terminated
the 5th
plan at the end of 4th
year i.e. March 1978 instead of 1979 and formulated a
draft five year plan for 1978-83. It also introduced the concept of Rolling Plan.
Under this plan when one year elapses another year is added to the planning
horizon so that we will always have a Five year plan.
Formation of Congress Govt. in 1980 terminated 5 year plan formed by
Janata Govt. within 2 years and formulated a 5 year plan for 1980-85 (6th
Plan)
7th PlanApril 1st 1985
8th
plan1992
9th1997-2002
Objectives:
1. utilization of the natural resources2. Ultimate removal of unemployment & poverty3. Increased standard of living
7/27/2019 Business Environment 4
31/105
Hossein.H.K Page 31
Five year Plan (2002-07)
Should aim at an indicative target of 8% GDP Gross for 02-07.
Increase in GDP, increased human well being, consumption of food and
other consumer goods, but also education, health, availability of drinking waterand basic sanitation.
1. Decreased poverty20% by 2007 and 10% by 20122. Increase in employment3. Universal access to primary education by 200%4. Decreased population2001201116.2%5. Increase in literacy 72% by 2007 & 80% by 2012.6. Decrease in Infant Mortality rate (IMR) 45%, per 1000 live births by 2007
and to 28% by 2012.
7. Decrease in Mattress Mortality Ratio (MMR) decrease 20% per 1000 livebirths by 2007 and to 10% by 2012.
8. Increase in forest and tree lover to 25% by 2007 and 33% by 2012.9. Villagesaccess to drinking water (portable) by 2012.10.Cleaning of all major polluted river by 2007 & notified stretches by 2012.
Performance
Although we have failed to achieve targets & 30% still under poverty line.
India is one of the largest industrial powers in the world and has the 3rd
largest
stock of scientific manpower.
Characteristics of Industries
Until 1991, the development of the private sector was under strict Govt.
control, was exercised through industrial licensing. Low like the Industries
(Development & Regulation) Act, the Companies Act gave enormous control over
7/27/2019 Business Environment 4
32/105
Hossein.H.K Page 32
the management and control of functioning of the industries. The M.R.T.P. Act
controlled merges, amalgamations and takeovers.
Capital Goods Vs Consumer GoodsBasic and capital goods were considered as pride of place and the consumer
goods given low priority. In the process of capital accumulation, certain capital
intensive or large scale, sectors producing non-importable commodities, transport,
electricity are bound to grow. Imports cannot be expanded.
In case of consumer goods, the growth of consumer non-durables was more
than durables. Establishment of basic and heavy industries has been a reason for
self-reliance in respect of capital goods and modern technology build defence
strength.
The Development of Industries
1. Private Sector2. Public Sector3. Joint Sector has been promoted to facilitate the utilization of the resources
and talents of the private sector and function with social orientation of
public sector.
4. Co-op. sector: Made progress in industries like sugar, cotton textiles andfertilizers. Growth of this sector promotes industrial democracy &
discourages concentration of economic power in few hands.
5. Village & small industries Not given the deserving importance. Someunits are reserved for them and the products too.
Import Substitution & Export Contribution
Import substitution assumed importance after the second plan. In early
decades of planning, considerable import substitution took place in many
7/27/2019 Business Environment 4
33/105
Hossein.H.K Page 33
important areas in capital goods, organic chemicals, pharmaceuticals, dyestuffs
etc. The Export Policy Resolution of 1970 emphasized the importance of
development and expansion of export oriented production. The Import
Substitution Industrializaiton Strategy (ISI) followed in India has had adverseeffects. The high protection from foreign competition, resulted in high costs, poor
quality, indifference towards consumers and lack of innovativeness.
In mid 1950s Jute & cotton industries (textiles) were denied foreign
exchange and with liberalization non-essential industries were given import
substitution.
The import restrictions, high costs and poor quality also very severely
affected Indias exportperformance.
Capacity Utilization
Under utilization amounts to wastage of scarce resources, leads to cost-
push inflation. Creates demand supply imbalance, affect balance of trade,
employment, saving and investment. Under utilization of Industrial policy is due
to factors like as planned excess capacity calculated to meet the demand in the
foreseeable future, tech invisibilities which may create capacity in excess
[present demand]; and initial testing troubles of new industries which is
incapable in the developing economy.
Regional Disparities: RemovalThird Plan
Large investments were made in backward areas. Incentive system was
introduced in 4th
plan. The backward area development by industrialization is not
given importance.
7/27/2019 Business Environment 4
34/105
7/27/2019 Business Environment 4
35/105
Hossein.H.K Page 35
4. Eighties Attention to markets & trading investments frame work tominimize the handicaps of small & marginal farmers and maximize benefits
of agri.
Expansion & Development of Inputs & Services:
Central & state Govts. Role in development of agriculture sector.
1. Irrigation: Increases agri productivity & employment opportunities. Union& State governments are developing the area under irrigation by executing
major, medium and minor irrigation projects and exploiting ground water
potential. Rural electrification programs (energisation of pumpsets) is also
being implement. This supports industries like cement, steel etc., Irrigation
electrification (aluminium cables, steels etc) will also increase demand for
pumpsets, PVC pipes, agri implements, insecticide and pesticides and
fertilizers, banks etc.
Private sectors like [farmers organization, voluntary bodies and general
public] are taking interest in irrigation. Ground water development is done through
own financing or institutional financing or both.
States like Maharashtra, Madhya Pradesh and Andrapradesh have initiated
the action for privatization of irrigation projects through projects like build own
operate (BOO) or build own operate transfer (BOOT) or Build own lease (BOL)
basis.
According to these projects the Irrigation department may use water in bulk
from the agency at mutually agreed price for distribution to the farmers. It also
been mobilized through issue of public bonds.
7/27/2019 Business Environment 4
36/105
Hossein.H.K Page 36
The most far reaching event was the introduction of high yielding varieties
(HYV) of a number of field crops and hybrids of millets in particular. This covers
wheat, rice, maize, jowar and bajra. Has revolutionalized agri and increased
production of foodgrains in country. The HYV increases demand for plantnutrients and protectants like fertilizers, insecticides and pesticides.
1963National Seeds Corporation (NSC)
1969State Farms Corporation of India (SFCI)For quality seeds
After liberalizationforeign firms were also set up.
Farm Research Institute is run by public and quasi public institutions.
1973Indian Council for Agricultural Research set up for research, educating &
extensively educating the farmers, animal husbandry and fisheries. This council
helps in inter and intra collaboration with National & International Institutions.
Ex: International Atomic Energy.
Banks are also giving credit to agri projects (RRB), commercial banks and
primary co-operative are the major source.
For all related activities and finances relating to it. NABARD National
bank for Agricultural & Rural Development was established plays financial and
development roles of RBI and Agri Refinance and development Corporation
(ARDC).
1971The Agro Service Centre SchemeEmployment for trained entrepreneurs,
Inputs at door step of farmers.
1965The Food Corporation of India
Rice Milling Storage Production ofnutritions processed foods. The Central
/ State Warehousing Corporation.
7/27/2019 Business Environment 4
37/105
Hossein.H.K Page 37
Agricultural Marketing:
6th
PlanThree essential elements of marketing.
1. Support prices adjusted with cost of production to ensure fair returns to thefarmers.
2. Arrangements for procurement of agri produce at support prices, if pricesdecrease.
The organization look after this is Food Corporation of India, The Cotton
Corporation of India, The Jute Corporation of India and the Co-operatives with the
National Agricultural Cooperative Federation of India (NAFED) as their Apex
Organization.
Directorate of Marketing & Inspection
Functions are to give advice to the Central & State Govts., Promote grading
and standardization, market practices, extension, research, cold storage.
Agmark for Cotton, vegetable oils, ghee, cream, butter, rice and wheat.
Regulated Markets:
The regulated market is a market where the activities are regulated by law
and is meant for dealing in a specific commodity or group of commodities.
The main objective of the regulated market is to save the farmers from the
exploitation of unscrupulous market intermediaries and to ensure a fair price for
their produce.
Co-op Marketing: It was started to help small farmers, grains & agri products are
graded and stored and sell at advantageous price. Marketing is the important
function of co-op. marketing.
Agri Price Policy:
Is decided by The Commission for Agri Costs and Prices (CACP).
7/27/2019 Business Environment 4
38/105
Hossein.H.K Page 38
Agri commodities like wheat and paddy have procurement prices fixed for
them.
Minimum Support Prices: for barley, gram, moong, urad, mustard, ground nut,
sunflower seed, soyabean and cotton (kapas).Statutory Minimum Price: for sugarcane, jute and tobacco.
Trends in Service Sector:
As an economy develops the share of the primary sector in the GDP and
employment declines and those of other sectors increase. The service sector is the
largest and fastest growing sector. The service sector now contributes more than
60% of the world GDP.
19801990, the average annual growth rate of value added in the service
sector in the developing economics was 3.5% compared to the GDP growth rate of
3%.
1990-983.7% & 3.3%
The service sector of India grew at 6.9% and 7.9% during the above
periods, compared to the corresponding GDP growth rates of 5.8% and 5.9%. The
share of services in the GDP of India increased from 39% 1980 to 46% 2000.
The growing importance of services is reflected in the international trade
too. Between 1970 and 1990 international trade is services increases by an average
of 12% & 8% during 1990-97.
The growth rate of trade in services has been faster than that of goods.
Growth in services and in additions the electronic commerce has added to the new
trade pattern. Exports of commercial services have been borrowing on every
continent throughout the 1990s.
Services are used in production of goods and other services. Due to
competition in services there is reduction of prices and improvement in quality.
7/27/2019 Business Environment 4
39/105
Hossein.H.K Page 39
Contribution of service to value added as % of GDP.
Region/country 1980 1990 1999
World 56 60 61
High Income Economics 59 64 64Low and Middle Income economies
(developing countries)
42 46 54
India 39 42 46
Trends in GDP
Govt. expenditure as % of GDP
10% in 20th century
20% in 1960
50% in 1995
In developing countries, the central govt. expenditure was nearly 15% of
GDP.
1960 in 1990 it was double of 1960.
19971998Economy growth
20014.4% total industrial stood at 2.7%
2002-034.0%
2002035.7% increase
Consumer durables has a negative growth of 6.3%, 2003-04 8.5%
industrial production by 7.0%.
7/27/2019 Business Environment 4
40/105
Hossein.H.K Page 40
UnitIII
Monetary and Fiscal Policy
Monetary and Fiscal policy are two powerful instruments of economicmanagement. Why? Necessary? In free enterprise economy.
1. Prices in free market fluctuate (govt. debits and credits)2. Balance of payment is in disequilibrium3. Involuntary unemployment4. Inequality in distribution of income and wealth5. Sluggish economic growth
I. The Monetary Policy
Def: Hary G. Johnson: Policy employing the central banks control of the supply of
money as an instrument for achieving the objective of general economic policy.
According to economists:
Monetary policy is the changes in the supply of money.
Credit policy is the changes in the supply of credit (different in broader sense)
Both policies
1. Central Bank administers both2. Instruments of control are some at aggregate level3. Determines the supply of money as well as the supply of bank credit
Main objectives are:
1. Maximum feasible output2. High rate of economic growth3. Fuller employment4. Price stability5. Greater equality in the distribution of income and wealth
7/27/2019 Business Environment 4
41/105
Hossein.H.K Page 41
6. Health balance of payments
These objectives are met under long-run price stability at maximum feasible o/p.
There are two theories.
1. Keynesian theory
It states that changes in the money supply work their way through the
system in a way that does not result in a close and stable linkage between changes
in the money supply and changes in the level of income.
2. Monetarist theory:
See the close and stable linkage. The monetary transmission mechanism is
the mechanism by which changes in the money supply produce effects that interact
with the real sector to create changes in income and in the price level. Two
primary mechanisms is applied,
Portfolio Mechanism: The way monetary policy affects the assets portfolio of
households and firms. This consists of two major schools of thought.
1. The Keynesian school: Treats changes in the market rate of interest that result
from changes in money supply as the significant aspect of the monetary policy. It
emphasizes on credit effect. To understand this, the households keep their
resources in the form of cost, financial assets (bonds, securities, shares and real
assets (plants and buildings, apartments and land etc.)
Assume that,
Central Bank of the country conducts an open market (exchange) purchase
and increase the money supply. With this cash balance is increased in individual
portfolio and securities with them are exchanged for the central bank notes. This
7/27/2019 Business Environment 4
42/105
Hossein.H.K Page 42
creates temporary imbalance of excess cash. To correct this they buy financial
assets. This will continue until no further substitution can be made and is
profitable. By this substitution they increase the value of these assets and reduce
market rate of interest. The reduced rate of interest will inturn encourage the firmsto increase via the investment multiplier. The money supply increase demand
increase national income and product via changes in the market rates in interest.
2. The Monetarist School: The direct change in the money supply as the most
relevant aspect of monetary policy. They follow Keynesian school but do not hold
the changes in the interest rate as a pre-requisite for the changes in the demand for
goods and service.
An increase in money supply can lead directly to on increase in spending
on real assets. They regard money and real assets as close substitutes. The
household maintain a desired stock of money relative to their income. The
monetary policy changes cause the actual stock to differ from the desired stock
and household always want desired stock of income and money balance. This
directly changes the level of aggregate demand, income and prices.
According to this as a consequence of an increase in money supply, there
is a portfolio adjustment involving a movement out of money directly into goods.
The end result may need not be change in interest rate at all, it may be a change in
the general price level on its output.
II. The Wealth Mechanism: Its based on the manner in which changes in the
quantity of money affect non-human wealth and how this in turn affects aggregate
demand.
Where, WNH = H + PNK
7/27/2019 Business Environment 4
43/105
7/27/2019 Business Environment 4
44/105
Hossein.H.K Page 44
I. Quantitative measures of monetary controlII. Qualitative and selective credit controls
I. quantitative measures of monetary control:1. Traditional measures are open market operations
Effectiveness of Open Market Operations
1. When commercial banks possess excess liquidity the open market operationdoes not work effectively.
2. During the period of depression, open market, operations are not effective forlack of demand for credit.
3. Open market has limited effectiveness due to under developed security andcapital market.
4. Govt. bonds & securities are not popular due to low rate of return.
II. Discount Rate (on Bank rate policy)
Is the rate at which the Central Bank rediscount the bills of exchange
presented by the commercial banks.
The RBI Act, 1935, defines Bank rate as the standard rate at which (the
bank) is prepared to buy or rediscount bills of exchange or other commercial
papers eligible for purchase under this act. It rediscounts only approved bills and
the first class bills of exchange.
Why Rediscount?
When commercial banks, faces a shortage of cash reserves, they approach
the Central Bank to get their bills of exchange rediscounted. . Of its functions
it is lender of lost Resort Central Bank. For rediscounting the bills of exchange,
the central bank changes the rate. This rate is traditionally called Bank rate or
discount rate.
7/27/2019 Business Environment 4
45/105
Hossein.H.K Page 45
Bank Rate is the rate which the Central bank charges on the loans and advances to
the commercial banks.
The Central Bank can change this rate - or decrease depending on
whether it wants to expand or contract the flow of credit from commercial bank. It
credit creation capacity reduces discount rate and vice versa. This is called
Bank rate policy or discount rate policy. This was first adopted by Bank of
England in 1839. It was an effective bank of market was introduced in 1922.
Generally, the Central Bank rate is 1% point higher than the discount rate
charged by the commercial banks. E.g. Central banks want to control the flow of
bank credit, to achieve this objective, it will raise the discount rate. This action of
the Central Bank reduces the flow of the credit in three ways.
1. Discount rate (interest rate) decrease net worth of govt. bonds (treasurybills and promissory notes), against which commercial banks borrow funds
from the Central Bank. Reduces the banks capacity to borrow.
2. When discount rate of Central Bank , Commercial Bank raises theirdiscount rate. DR, cost of credit, discourages business sector to get
their bills of exchange discounted. It also interest rate structure and
decrease demand for funds. This policy is called Dear Money Policy. A
reverse process is cheap money policy.
3.
Bankers lending rate is adjusted to deposit rate.
Bank rate,
deposit rate.This turns borrowers into depositors, savings in bank are in form of
deposits.
Limitations
7/27/2019 Business Environment 4
46/105
Hossein.H.K Page 46
1. Effective only when commercial bank borrows from Central bank, becausethey have their own financial resources.
2. With growth in credit institutions & financial intermediaries, the CapitalMarket has widened. The share of banking credit has declined.
3. Variations in the discount rate become effective only where demand yourcredit is interest elastic.
iii) The CSR & SRR: Cash reserve ratio, CRR is the percentage of total deposits
which commercial banks are required to maintain in the form of each cash reserve
with the Central Bank.
Objection: 1) Prevent shortage of cash (Depositors) CRR depends on govt. rules
and keep only small ratio in the form of reserves.
CRR is non-interest bearing often keep their cash reserves below the safe
limits. It might lead to financial crisis in banking sector. Central bank imposes
CRr, to control money supply. It controls legal powers to change. It is a legal
requirement. Therefore it is called statutory reserve ratio, SRR. When economic
conditions demand monetary contraction the Central bank cRr, when it demands
monetary expansion, Bank decrease CRR.
E.g. If deposit of commercial bank = Rs. 100 Million, & cRR = 20%
a) Banks can loan Rs. 80 millionb) Credit or deposit multiplier = 5
100 x 5 = 500 million or
80 x 5 = 400 million
If money supply decrease CRR increase by 25%, credit, multipliers
decrease = 4.
Loan = Rs. 75 M (100-25) = 75 M
Total Credit = 400 m
7/27/2019 Business Environment 4
47/105
Hossein.H.K Page 47
& Additional credit = 75 x 4 = 300 M
100 M decrease considerable impact on money market and if it is CRR = 20%
then situation changes.
SLR: Statutory Liquidity Ratio
The proportion of total deposits which commercial banks are required to
maintain with them in the form of liquid assets (cash reserve, gold & govt. bonds)
in addition to CRR.
II. Qualitative or Selective Credit Controls
The qualitative methods of monetary control affect (when effective), the
entire credit market in same direction. They lead either to expansion or to
contraction of the total credit. The impact is uniform. Authorities face problems
like,
i) Rationing the creditii) Diverting the flow of credit from non-priority sectorsiii) Curbing speculating tendency based on the availability of bank
credit.
These are not served well by quantitative measures, qualitative or selective credit
controls is used.
i) Credit Rationing: When there is shortage of institutional credit available for the
business sector, the large and financially strong sectors or industries tend to
capture the lions share, in the total instalments. Credit priority sectors and weak
industries are starved of necessary fund and bank credit goes to non-priority
sector.
7/27/2019 Business Environment 4
48/105
Hossein.H.K Page 48
a) Imposition of upper limits on the credit available to large industries andfirms.
b) Charging higher interest rate on bank beyond a certain limit.
ii) Change in lending margins:
Banks lends Jew % only on value of the mortgaged properly. The gap
between the value of the mortgaged property and amount advanced is called
lending margin. E.g. if value of stock = Rs. 10 M, amount advanced = Rs. 6 M,
Lending margin = 40% [can be increase in central bank with view to increase or
decrease credit].
This was used by RBI first time in 1949. objective is to control speculative
activity in the stock market.
By 1956, extensive use in scarce agricultural products like food grains,
cotton, oil seeds, vegetable oil, sugar, Khandsari and gur, cotton textile and yarns,
decrease price secures loans. This increases the buying, power and stocking and
future mortgaging and borrowing.
Therefore prices shoot up due to artificial scarcity. This is widely used in
India.
iii) Moral Suasion
Method by persuading and convincing the commercial banks to advance
credit in accordance with the directive of the central bank in the economic interest
of the country. But not effective in underdeveloped country. In this method, the
central bank writers letters to and holds meetings with the banks on moey and
credit matters, with clear directive to the banks to carry out their lending activity
in a specified manner.
7/27/2019 Business Environment 4
49/105
Hossein.H.K Page 49
Limitations of Monetary Policy:
1. The time lag: the time taken in checking out the policy action, itsimplementation and working time. Its divided into two parts:
i)
Inside tag or preparatory lag:a) Identifying nature of probabilityb) Identifying sources of probabilityc) Choice of appropriate policy actiond) Implementation of policy action
ii) Outside lag or response lag:The time taken by households and the firms to react in response to the policy
action taken by the monetary authorities. This lag is long.
2. Problems in forecasting
Reliable assessment of magnitude of the problem recession or inflation as it
helps in determining the appropriate policy measures.
3. Non-Banking financial intermediaries:
Structural change reduces effectiveness of monetary policy. Although
financial intermediaries cannot create credit thro the process of credit multiplier,
their huge share in the financial operations reduces the effectiveness of monetary
policy.
4. Under development of money & capital market
Effectiveness of monetary policy is less developed countries is reduced
considerably because of the under developed character of their money and capital
markets.
7/27/2019 Business Environment 4
50/105
Hossein.H.K Page 50
FISCAL POLICY
Def: As the govts programme of taxation expenditure and other financial
operations to achieve certain in national goals.
Objectives:
1. Eco growth2. Promotion of employment3. Economic stability & higher priority4. Eco justice or equity
Two instruments used are taxation and public expenditure.
I. Indias taxation policy 1950-1990:
Was formulated to meet the financial needs of the country in the post-
independence period.
Role of RBI in Regulatory Banking Sector
The structure of Indian Banking System evolved during the pre-
independence period without any control and direction. The country had no
Central Bank prior to establishment of RBI.
The imperial Bank (SBI) of India though commercial bank, performed
certain central banking functions such as acting as bankers bank and banker to the
govt. the Central govt. had the sole authority to issue currency. But the result was
unsatisfactory for the development of the money market and commercial bank.
RBI was originally established as share holders bank in 1935 with the
nationalization in the west central government on January 1, 1949 acquired entire
capital and became a state owned institution.
7/27/2019 Business Environment 4
51/105
Hossein.H.K Page 51
Functions of RBI
I. General Central Banking Functions:
The model for RBI is the Bank of England and its Central banking
functions are similar.
2. Issue of currency notes
Originally provision was for issuing currency notes according to
proportional reserve system but not elastic and did not suit the developmental
planning.
According to RBI (Amendment Act), Reserve system was introduced, a
minimum reserve system of Rs. 515 CR (Rs. 400 Cr in foreign securities, Rs. 115
Cr in gold coins) was to be kept. The provisions regarding maintenance of reserves
was again amended on October 31st 1957, which foreign exchange reserve to Rs.
200 G,. of this value of good was not to be at any time less than Rs. 115 Cr.
2. Bankers to Govt.
It is bankers agent & advisor. The RBI has obligations to transact the
banking business of the central and state govts. It accepts money and makes
payment on the govt. behalf and carry out exchanges and remittances, manages the
public debts and issues new loans.
RBI [Govt]
1. Advices Govt. on quantum and terms of new loans2. Sells treasury bills3. Makes wages and means of advance short term loans, repayable within 90
days from the date of advance.
7/27/2019 Business Environment 4
52/105
Hossein.H.K Page 52
4. RBI is the sole agent for transacting govt. receipts and payments.5. Advices on banking policies, financial matters and planning & resource
mobilization.
3. Bankers Bank:
Controls commercial banking system under the RBI Act, 1934 and Banking
Regulation Act 1949. Assists scheduled commercial banks [Banks where affairs
are not conducted in a manner detrimental to depositors interest must maintain a
cash reserve (as decided by RBI). With RBI against their demand and time
liabilities RBI can also direct the bank to maintain 100% CR against all deposits
received after a specified date; these banks should submit weekly statement of
their transactions to the RBI] and state Co-op. Banks. RBI considers factors such
as the financial its tending policy and securities offered. While making advances
to it. It can deny residenting without any reason.
The regulatory functions of RBI under Banks Regulatory Act 1949 are:
1. Licensing of Banks2. Branch Expansion3. Liquidity of assets of commercial bank4. Management and methods of working5. Amalgamation6. Reconstruction and liquidation
According to RBI (Amendment) Act, Reserve system was introduced, a minimum
reserve system of Rs. 515 Cr (Rs. 400 cr in foreign securities Rs. 15 Cr in gold
coins) was to be kept. The provisions regarding maintenance of reserves were
again amended on October 31, 1957 which reduced. The amount of gold (coin and
billion) and foreign exchange reserve to Rs. 200 Cr, of this value of gold was not
take at any time less than Rs. 15 Cr.
7/27/2019 Business Environment 4
53/105
Hossein.H.K Page 53
2. Banker to the Govt.
It is banker, agent and advisor. The RBI has the obligation to transact the
banking business of the central and state government. It accepts money and makespayment on the govt. behalf and carry out exchange and remittance, manages
public debt and issues loans.
RBI Govt.
1. Advices govt. on quantum and term of new loans2. Sells treasury bills3. Makes ways and means of advance short term loans, repayable within 90
days from the date of advance.
4. SBI is the sole agent for transacting govt. receipts and payment5. Advices on banking policies, financial matters.
Developmental activities
RBI established the deposit insurance corporation of India in 1962 with the
12% of period of security to deposits.
Established UTI in 1969 to mobilize savings. To small investors, UTI
offers the advantages of reduced risk, steady income, liquidity etc. Assisted
development of short term coop credit for agri and also participated in establishing
the agri refinance and development coop covers in 1963. Half of capital (Rs. 100
Cr) of NABARD has been provided by the RBI.
Control of Credit by RBI
RBI Act of 1934 & BR Act of 1949
RBI like any central bank resort sto bank rate manipulations, open market
ops, reserve requirement changes, direct action, rationing of credit and moral
7/27/2019 Business Environment 4
54/105
Hossein.H.K Page 54
suatium. It also influences commercial banks lending policy, rate of interest, form
of securities against loans and portfolio distribution.
Stabilises external value of Rupee and therefore its function is of ancustodian of nations foreign exchange reserves. Its obligatory for the RBI to
budget sell currencies of all IMF members.
5. Credit control
Has all authority to use qualitative and quantitative methods of credit
control, but are ineffective.
6. Agricultural Finance
Other integrated scheme of agriculture credit was implemented, RBI role
from lender of last resort changed to that of an active agency for promotion of
appropriate specialized agencies of agricultural, finance the setting up of
NABARD in 1982.
7. Collection and publication of data
The RBI has been entrusted which the task of collection of compilation of
statistical into related to banking and other financial sectors of economy. RBI
bulletin monthly presents was only above function but also provides results
important studies and investigations conducted by RBI. Report on currency and
finance is an annual publication which provides comprehensive review of various
development of economic and financial importance.
7/27/2019 Business Environment 4
55/105
Hossein.H.K Page 55
Effectiveness depends on 3 factors
- Commercial banks in the country should not be oversee to availingrediscounting facility from the central bank.
-
Bank do not maintain any excess can be reserve agreement deposit and ifextra ordinary demands are made by the depositors, they should get bills
rediscounted from central bank.
- Banks must hold adequate quantity of such credit instruments which will berediscounted by the central bank as per the legislation.
- Last two conditions are not satisfied in India. Firstly commercial bank arenot much dependent on RBI for financial assistance.
- Sedcondly in the absence of a will organize bill market, they lack adequatequantity of eligible bill which can be rediscounted from the RBI. Carries of
money market each pre requisite for the success of RBI bank rate policy.
Open Market operations
RBI can authorizes the RBI to conduct purchase and sale ops in the govt.
securities, treasury bills and other approved securities. The silver several little
purposes. RBI has been extensively undertaking Switch operations (purchasing
of one sale of another or vice versa).
Fiscal Policy
Def: Is the governments programme of taxation, expenditure and other financial
operations to achieve certain national goals. The objectives are derived from the
aspiration and goals of the society.
Objectives are:
i) Economic growthii) Promotion of employmentiii) Economic stability &
7/27/2019 Business Environment 4
56/105
Hossein.H.K Page 56
iv) Economic justice or equity
These objectives vary from country to country and from time to time. The
objectives are growth, employment and equality. The two basic instruments thatare used to achieve the social goals are taxation and public expenditure.
RBI attempted to raise resources by selling govt. securities for meeting
development as well as defence requirements. There is fiscal bias. RBIs sales of
govts securities has been kept up by imposing a statutory condition on various
financial institutions to invest a portion of chair income/deposits in the govt. and
other approved securities. Now RBI doesnt purchase securities against each
payment.
CRRRBI Act 1956RBI acquired the power to change reserve requirement of
CBs between 5 & 20% in reserve respect of their demand liabilities between 2 &
8% in respect of their time liabilities. RBI direct scheduled bank to keep certain
reserves of their liabilities created after a specified date in cash.
RBI Act was again amends in 1962 which fixed CRR at 3% for all
liabilities. Range is 3-15%. This tech is been implied for last 2 decades for
controlling inflation.
SLR: BR Act 1949, enabled the CBs to liquidate their govt. security holdings
wherever RBI increase CRR. The logphole was what a minimum of 25% SLR
could be maintained. RBI can raise amounts 15%
System of different rates
In 1960 RBI introduced a system of lending rates on slab basis. It was
effective for 4 years till it was replaced by her liquidity ratio system.
7/27/2019 Business Environment 4
57/105
Hossein.H.K Page 57
Formulation of Tax Policy
Tax policy existed due to recommendations of dozens of tax enquiry
committees and review panels and deliberations on the recommendations in the
parliament. It is formulated, reformulated to make it fair, equitable and efficient.This started in early 1950s by appointment of a number of committees.
1. Taxation Enquiry Committee (TEC) 1953-54 to suggest suitable taxmeasures for mobilizing additional tax revenue.
2. Nicholas Kaldor Committee 1956 under chairmanship of Prof. NicholasKaldor, tax expert of Britain to suggest new tax measures to augment govt.
revenue.
3. Direct Taxes Administration Committee: (Tyagi Committee) 1958i) A scheme of integration of direct taxesii) To prevent tax evasioniii) To simplify the procedure of tax complianceiv) The committee on rationalization & simplification of the tax
structure (Bhoothalingam committee)1967 to suggest measures
to reform the tax system and to prevent tax evasion.
v) Direct taxes enquiry committee (Wanchoo committee) 1971 tosuggest tax reform measures to prevent tax evasion.
vi) Indirect taxation enquiry committee (Jha Committee) 1976 To find and examine the sources of anomalies on the indirect tax
system and to explore the possibility of implementing Value
Added Tax (VAT) system in place of excise duties.
vii) Direct tax laws committee (Chaksi committee) 1978 to suggestmeasures to simplify and rationalize tax laws to improve the
implementation
viii) Basic Function of tax policy: Tax policy was designed to performtwo basic functions.
7/27/2019 Business Environment 4
58/105
Hossein.H.K Page 58
Indias Taxation Policy 1950-1990
Was formed primarily to meet the financial needs of the country in thepost-independence period. The problem faced was how to mobilize adequate
financial resources to finance the development programmes chalked out in 5 year
plans. Financial resources has to be increased 4 times, so that rate of capital
formation could be stepped up from 5% of national income to say 20%. The
known source of development finance taxation, domestic borrowing, external
borrowing on foreign aid had the potentials of yielding adequate development
finance. Taxable potential was very low as income was low and per capita
borrowing was lower. The repayment near slow. So taxation policy was
formulated.
Revenue function
Revenue collection is the primary objective of Indias tax policy. The state
and central government levies taxing power extensively and intensively. The taxes
imposed are from 1950,
1. estate duty2. Wealth tax3. Gift tax New in 19504. Expenditure tax5. Capital gains tax
A tax rates were imposed on direct indirect taxes. Central Excise duty is imposed
on all imaginable non-agriculture products. High import duty is imposed on almost
all items of exports.
7/27/2019 Business Environment 4
59/105
Hossein.H.K Page 59
Estate government imposes tax on
1) Agricultural income tax on large holding tax2) Surcharge of cash crops3)
Profession tax
4) Tax on urban property5) Sales tax on motor spirit6) Motor vehicle tax7) Tax on passengers and goods, entertainment
Industrial Finance
Sources of finance for small and medium scale industries
Both medium and small scale industries require capital for plant and
machinery, production and final disposal. The capital varies in rural areas they
have to borrow from money lenders or land owners and pay high interest rate. In
urban areas, capital is better mobilized. The banks charge rate of interest often
ranging between 24 to 36% and not be able to raise necessary capital.
a) Loans by Commercial Banks
For long time CBs did not bother small and medium scale industries. SBI
with RBI took the initiative of setting up a pilot scheme for the provision of credit
for small scale industries. The schemes was extended to all branches of SBI.
Others CBs were slow in lending by March 1966 they had made advances amount
to Rs. 90 crores to small units with nationalization more advance to S & M
industries.
b) Credit Guarantee Scheme for S & M I
Came into force in July 1980. this is a important phase, the objective of the
scheme was to provide a measure of protection to specified banks irrespective of
their loans to small borrowers in the priority sectors of S & MI. the administration
7/27/2019 Business Environment 4
60/105
Hossein.H.K Page 60
was with RBI, but was transferred to the Deposit Insurance & Credit Guarantee
Co-op (DICGC). This operates 5 schemes4 for small borrowers and one for S &
MI. The advances to small borrowers is Rs. 25,600 crores. 515 Credit institute are
participating in the 5
th
scheme.
c) National Small Industrial Co-op. (NSIC)
Was set up in February 1955, for the purpose of assisting, financing,
protecting and promoting the S / I in India.
Functions are
1. To secure govt. order for output of SI unit.2. To provide financial, technical and other assistance to fulfil orders.3. To secure coordination between large and small scale industries to enable
small scale. In order to manufacture ancillaries and component parts
required by the large-scale industries.
4. To underwrite and guarantee loans from banks and other credit institute.
It also introduced hire purchase of machineries on easy payments. It conducts
surveys and secures contracts from central government.
SIDBI
Set up by Govt. of India under a Special Act of the Parliament in April
1990 as wholly owned subsidiary of SIDBI. It has taken over the outstanding
portfolio of IDBI relating to the small scale sector worth over Rs. 4,000 crores.
Authorised capital of SIDBI is Rs. 250 crores which can be increased to Rs.
1,000 crores.
Role:
1. Principal interest for SBI
7/27/2019 Business Environment 4
61/105
Hossein.H.K Page 61
2. Coordinate functions of other banks and financial institutions3. Administer small industries for fund and national equity fund.
Functions:1. Refinances loans and advance extended by primary lending institute and
provide resources support system.
2. Rediscount on discounts bills arising from sale of machinery.3. Grants direct assistance as well as refinance loans extended by primary
lending institute for financing export of products manufactured by last for
industrial concerns in SSI.
4. Extends financial support to state small industries development corporationfor providing scarce raw materials to marketing the end products of
industrial units in the SSI.
5. Provided financial support to NSIC for providing leasing, hire purchase andmarketing support to IU.
SIDBI was set up to ensure larges flow of financial assistance to SSI.
Technical upgradation and modernization of existing units, expanding channel for
marketing.
Mission:
1. Stimulate the promotion of new industries2. Assist the expansion and modernization3. Furnish technical and managerial aid
1. Long term or medium term loans, both rupee loans and foreign currencyloans.
2. Participates in equity capital and in debenture and underwrites new issuesof shares and debenture.
7/27/2019 Business Environment 4
62/105
7/27/2019 Business Environment 4
63/105
Hossein.H.K Page 63
UTIUnit Trust of India
UTI was formally established in February 1964, to extend facilities of
investment in equity capital of companies, by the large and growing number ofsmall investors in the middle income group of the community.
Initial capital was 5 Crores which was subscribed fully by RBI, the LIC, the
SBI and scheduled banks and other financial institutions. The management and
direction is entrusted in the hands of the trust and in hands of Board of Trustees.
Primary objective: [two fold]
1. Stimulate and pool the savings of the middle and low income group.2. Enable them to share the benefits and prosperity of the reply granting
industrialiszation in the country.
It could be achieved in three fold:
1. By selling units of the trust among as many investors as possible indifferent parts of the country.
2. By investing the sale proceeds of the unit and also the initial capital fund ofRs. 5 crores in industrial and corporate securities.
3. By paying divides to those who have bought the units of the trust.
7/27/2019 Business Environment 4
64/105
Hossein.H.K Page 64
Industrial Reconstruction Bank of India (IRBI)
Was set up in 1971 April an institution named IRCI Industrial
Reconstruction Corporation of India under Indian Companies Act to look aftersick industries and for speedy reconstructions and rehabilitation and developing
infrastructure facilities like transport and marketing etc.
On August 1984, the Govt. of India passed and act converting the IRCI into
Industrial Reconstruction Bank of India (IRBI). IRBI was established in March
1985, for revival, assisting and promoting industrial development and
rehabilitating industrial concern. IRBI extends credit to sick small scale units
emphasis on continuous modernization, improve productivity and upgrade
technology.
ExportImport Bank of India
Commonly known as Exem Bank, was set up on January 1982 to take over
operations of the internal financial wing of the IDBI (to provide financial
assistance to exporters and importers). It provides refinance facilities to CBs and
FI against exportimport.
Capital Resources
Authorized capital of Exim Bank is Rs. 200 cror