Post on 29-Oct-2019
transcript
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
TMR Dwg. No.
• Grate/Frames 9x6 Dwg. AS3996
• Recessed Road Gully Units Dwg. 1443, 1444
• Protruded Road Gully Units Dwg. 1443, 1444
• 1220 Road Gully Units Dwg. 1459
• 7x4 Road Gully Units Dwg. 1443, 1444
• Type 28 Road Gully Units Dwg. 1445
• Drainway Units Dwg. 1321, 1322
• 1050 Hydracell Pit Base
• Field Inlet Type 1 Dwg. 1309, 1310
• Manhole Roof Slabs Dwg. 1308
• Lintels Dwg. 1313
• Batter Chutes
• Sub Soil Components Dwg. 1116
• Sloping Headwalls
• Q-Seal Headwalls Dwg. 1243
• Box Culverts
• Box Culvert Headwall
• Interlocking Kerbs
• Wheelstops
• Light Pole Bases Dwg. 1393
C-M TMR Products Index
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
Auto Lock Grate & Frame 900x600 Class D Bicycle Safe to AS3996
Lift this Side to Disengage Lock
Auto Lock
990mm (Grate)
1080mm (Frame)
570mm (Grate)
605mm (Frame)
75mm
• The grate will not close until the
Auto Lock is disengaged.
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
C-M MAIN ROADS/GOLD COAST CITY COUNCIL STYLE ROAD GULLY UNIT
930
300
400
375
75
125
125
150
150 610 225 150
Model: 2.4m
350
450
375
75
125
125
150
150 610 225 150
Model: 3.6m
350
450
375
75
125
125
150
150 610 225 150
Model: 4.8m
Class ‘D’ Bikesafe Grate 900 x 600 wide to
AS 3996-92
250 250
225 2
25
B -
A -
B
-
SECTION
A
-
SECTION
Model: R24R
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
C-M 'PROTRUDED TYPE' ROAD GULLY UNIT 24 SERIES RGU
(ALIGNMENT USING KERB FACE) 'KERB IN LINE'
Also available in 3.6m and
4.8m Series
Grates:
Bikesafe Design to
AS3996 or Type ‘A’
RGU Model L24P
RGU Model R24P
RGU Model C24P
Cross Section at rear of grate
Aust. Reg. Design 120789
Aust. Patent No. 602076
Side Section
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
C-M ROAD GULLY INLET UNIT R.G.U. 1220:Anti-Ponding
Ideal where space is limited
for gully inlet unit...
...driveway
...car park
...townhouse development
Class ‘D’ Bikesafe grate
900 x 600 wide to
AS 3996-92
Model M12
Internal Pit Size
835 x 930.
400
375
140
280
1150
SIDE SECTION
FRONT VIEW
1220
10
30
650
150
11
50
10
65
PLAN
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
C-M ROAD GULLY INLET UNIT TYPE 24R 74
RGU Type L24 R74 RGU Type R24 R74
RGU Type C24 R74
2400
SECTION A-A
Patent Products 74 Class ‘D’ CONCRETE TO AS 3902 CASTINGS TO AS 1830 REINFORCING TO AS 1302 AUST. PATENT NO. 602076
AUST. REG. DESIGN No. 120789
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
C-M CONCRETE TYPE 28 ROAD GULLY UNIT
Right Hand
Left Hand
Centre
Notes: 1.3T Swiftlift Anchors to AS4680 Concrete S40 20 to AS3600 Casting Monolithic Reinforcing, Minimum Cover 40mm to AS4691 (Reference Standard
Drawing MRD 1445 Type 28)
Side Section Class D Bikesafe Grate. Design to AS 3996-92
Manufactured in accordance with associated product drawings MRD 1443, 1444, 1445 and 1459
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
QDMR Standards 1321 - 1322 IPWEA Standards D0067
Convertor Slabs
Shaft Off Set
1200 475
1350 550
1500 625
1800 775
2100 925
Model Description
0TC0T Chamber Unit Only
1TC0T Left Hand Trough and Chamber
0TC1T Right Hand Trough and Chamber
2TC0T 2 x Left Hand Trough and Chamber
0TC2T 2 x Right Hand Trough and Chamber
3TC0T 3 x Left Hand Trough and Chamber
0TC3T 3 x Right Hand Trough and Chamber
1TC1T Sag Trough and Chamber
1T0C0T Trough
• Suits 1050 - 2100 Shafts • All Units Fitted with
Vaned Grates or as Specified
• No Convertor Slab Required for 1050 Shaft
C-M Drainway System (Monolithic)
Model: 1TC0T
Model: 0TC0T
Model: 1TC1T
Model: 1T0C0T
Model: 0TC1T
1350 Typ
4050 Typ
700 Typ
Chamber and Trough 2700 Typ
576 Typ
Model: 0TC1T
Patent Pending
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
HYDRACELL 1050 KNOCK OUT PIT BASE
3 x N12 Bars
ELEVATION
890
160
1200
100
N12 Ring 1120 Dia
SL81 Central
C-M Concrete PB 1050 Hydracell (Knock Out Pit)
Concrete to AS3902 Concrete Strength 50MPa Reinforcing: 1 x 1100 x 1100 SL81 Mesh Each Side Reinforcing to AS1302 Exposure: B2 Min. Cover: 35 22kN/m3 Earth (4m Depth) 5kpa Surcharge 2 x 1.3T Swiftlifts Weight: 1500Kg
Patent Applies
1200 Ø 1050
1200 N12 Vertical
All dimensions in millimetres.
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
Field Inlet Type 1 - TMR
Notes: 1. Concrete S40 TMR 2. Reo: F72 Mesh, Y12 Lig 3. Galvanised Grate & Frame as Specified to AS3996 - Class B 4. 50mm Clear Cover 5. Opening Size: 900x600 or 600x600
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
C-M Precast Manhole Roof Slabs Manufactured to TMR, IMEAQ or Council Standards
Available Sizes: 1130mm O.D Private Property – 115mm Thick 1350mm O.D (1050 I.D) – 175mm Thick 1500mm O.D (1050 I.D) – 200mm Thick 1500mm O.D (1200 I.D Sewer) – 200mm Thick 1650mm O.D (1200 I.D Stormwater) – 200mm Thick 1700mm O.D (1200 I.D) – 200mm Thick 1800mm O.D (1350 I.D) – 200mm Thick 1950mm O.D (1500 I.D) – 200mm Thick 2250mm O.D (1800 I.D) – 250mm Thick 2550mm O.D (2100 I.D) – 250mm Thick 1950 EXT 300mm (1500 I.D Expanded) – 200mm Thick 1950 EXT 600mm (1500 I.D Expanded) – 200mm Thick 1950 EXT 900mm (1500 I.D Expanded) – 200mm Thick 600 Class D Stormwater Manhole Upstand – 150mm Thick
Available Openings: 600mm Dia 1050mm Dia
600 x 600 600 x 900 800 x 900 900 x 900
An Extensive Range Of Sizes Are Available Upon Request Custom Sizes Are Made To Order
Cast Iron Cover & Frames Or Grates Can Be Cast In Flush.
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
DIMENSIONS Lintel A B C D X Weight
(Kg) VS 1200 830 650 720 230 250 S 2400 2040 1800 1970 400 500 M 3600 3240 3000 3170 690 700 L 4800 4440 4200 4370 1000 900
PRECAST LINTELS
MODEL - S
• Lintel Description “VS” Very Small,
“S” Small, “M” Medium, “L” Large
• Dimensions (mm) & Weights (kg)
are Approx. Only
• Manufactured to ISO 9001
ELEVATION
PLAN
Model
S - M - L
Model
VS
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
50mm
Width Internal 330mm External 425mm
Width Internal 440mm External 550mm
Height Internal 110mm External 160mm
Height Internal 160mm External 215mm
C-M Batter Chutes For Use on Embankments
They can be safely handled and easily installed on site
using a 1.3t Swiftlift foot anchor.
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
Clean Out Cap
380
80
540
380
110 Dia Outlet Hole
Outlet
Sub-Soil Components
* Pest Proof Flap Available
75
100mm Plastic Cap
300
300
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
Nom. Pipe Size
Dimensions (Approx. Only) MASS KG A B C D E
300 1220 415 650 650 270 400
375 1220 480 650 650 160 400
450 1500 570 880 800 350 500
525 1500 650 880 800 220 500
600 1500 720 880 800 210 500
• Concrete S40 MRD
• Class Exposure ‘C’
• Reinforcing 12Y/ RF72
• Lifting Anchors 1.3 Tonne
C-M Precast Sloping Headwall
Side View Rear View
A
C
E
D
B
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
Q-SEAL HEADWALL PIPE SIZE - 375 - 450 - 525
Patent Pending
D
E
B
A
12mm Reidbar Galv Ferrules for Curtin Wall
F
• The Q-Seal eliminate dislodgement from headwall during high flow
• The Q-Seal achieves a sealing and adhesion to the stormwater pipe by pouring premix concrete into the void.
• Available in all sizes 375 - 1350
• Subsoil outlets on all headwalls with Q-Seal system.
• TMR Approved in conjunction with standard Drawing 1243.
• Design life of 100 years.
Nom. Pipe Size
Dimensions (Approx. Only) Weight KG
A B C D E F G
375 500 1490 1010 790 830 110 410 790
450 580 1490 1010 790 830 110 410 760
• Lifting Anchors - 3 x 1.3 Swiftlifts
Subsoil Outlets
G
Void to be filled post
pipe installation.
�
�
�
�
�
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
Q-SEAL HEADWALL PIPE SIZE - 600 - 675 - 750 - 825
Patent Pending
D
E
B
A
12mm Reidbar Galv Ferrules for Curtin Wall
F
• The Q-Seal eliminate dislodgement from headwall during high flow
• The Q-Seal achieves a sealing and adhesion to the stormwater pipe by pouring premix concrete into the void.
• Available in all sizes 375 - 1350
• Subsoil outlets on all headwalls with Q-Seal system.
• TMR Approved in conjunction with standard Drawing 1243.
• Design life of 100 years.
Nom. Pipe Size
Dimensions (Approx. Only) Weight KG
A B C D E F G
525 660 2120 1460 1100 1130 130 960 1720
600 752 2120 1460 1100 1130 130 960 1700
• Lifting Anchors - 4 x 2.5 Swiftlifts
Subsoil Outlets
G
Void to be filled post pipe installation.
�
�
�
�
�
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
Q-SEAL HEADWALL PIPE SIZE - 900 - 1050
Patent Pending
D
E
B
A
12mm Reidbar Galv Ferrules for Curtin Wall
F
Nom. Pipe Size
Dimensions (Approx. Only) Weight KG
A B C D E F G
675 850 2120 1460 1100 1330 130 960 2000
750 930 2120 1460 1100 1330 130 960 1380
825 1020 2120 1460 1100 1330 130 960 1320
• The Q-Seal eliminate dislodgement from headwall during high flow
• The Q-Seal achieves a sealing and adhesion to the stormwater pipe by pouring premix concrete into the void.
• Available in all sizes 375 - 1350
• Subsoil outlets on all headwalls with Q-Seal system.
• TMR Approved in conjunction with standard Drawing 1243.
• Design life of 100 years.
• Lifting Anchors - 4 x 2.5 Swiftlifts
Subsoil Outlets
G
Void to be filled post
pipe installation.
�
�
�
�
�
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
Range Weight
1.2m Long Weight
2.4m Long
450 x 225 450Kg 900Kg
450 x 300 485Kg 970Kg
450 x 375 520Kg 1040Kg
SMALL BOX CULVERT 450 Series
Australian Standards Reinforced Concrete Box Culverts AS1597.1-2010 - TMR Approved
• Load Class Roadway 0-2m Fill Cover
• Exposure B2
• For Placement Refer to Installation Guide
• Lifting – 4 x 1.3 Swiftlift Anchors
Precast Headwalls are available to suit the range.
Available Lengths
2400
1200
100
700
450
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
Range Weight
1.2m Long Weight
2.4m Long
600 x 225 430Kg 860Kg
600 x 300 480Kg 955Kg
600 x 375 590Kg 1175Kg
600 x 450 620Kg 1235Kg
SMALL BOX CULVERT 600 Series
Australian Standards Reinforced Concrete Box Culverts AS1597.1-2010 - TMR Approved
• Load Class Roadway 0-2m Fill Cover
• Exposure B2
• For Placement Refer to Installation Guide
• Lifting – 4 x 1.3 Swiftlift Anchors
Precast Headwalls are available to suit the range.
Available Lengths
2400
1200
850
600
100
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
Range Weight
1.2m Long Weight
2.4m Long
750 x 225 590Kg 1180Kg
750 x 300 635Kg 1270Kg
750 x 375 695Kg 1390Kg
750 x 450 735Kg 1465Kg
SMALL BOX CULVERT 750 Series
Australian Standards Reinforced Concrete Box Culverts AS1597.1-2010 - TMR Approved
• Load Class Roadway 0-2m Fill Cover
• Exposure B2
• For Placement Refer to Installation Guide
• Lifting – 4 x 1.3 Swiftlift Anchors
Precast Headwalls are available to suit the range.
Available Lengths
2400
1200
1000
750
100
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
Range Weight
1.2m Long Weight
2.4m Long
900 x 225 670Kg 1340Kg
900 x 300 720Kg 1440Kg
900 x 375 760Kg 1520Kg
900 x 450 810Kg 1620Kg
SMALL BOX CULVERT 900 Series
Australian Standards Reinforced Concrete Box Culverts AS1597.1-2010 - TMR Approved
• Load Class Roadway 0-2m Fill Cover
• Exposure B2
• For Placement Refer to Installation Guide
• Lifting – 4 x 2.5T Swiftlift Anchors
Precast Headwalls are available to suit the range.
Available Lengths
2400
1200
100
1150
900
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
Range Weight
1.2m Long Weight
2.4m Long
1200 x 300 840Kg 1680Kg
1200 x 375 960Kg 1915Kg
1200 x 450 1005Kg 2010Kg
1200 x 600 1095Kg 2190Kg
SMALL BOX CULVERT 1200 Series (300 – 600)
Australian Standards Reinforced Concrete Box Culverts AS1597.1-2010 - TMR Approved
• Load Class Roadway 0-2m Fill Cover
• Exposure B2
• For Placement Refer to Installation Guide
• Lifting – 4 x 2.5T Swiftlift Anchors
Integrated Headwall Available in 1200 Range - IHS™
Available Lengths
2400
1200
100
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
Range Weight
1.2m Long Weight
2.4m Long
1200 x 750 1550Kg 3100Kg
1200 x 900 1655Kg 3310Kg
1200 x 1200 1865Kg 3730Kg
SMALL BOX CULVERT 1200 Series (750-1200)
Australian Standards Reinforced Concrete Box Culverts AS1597.1-2010 - TMR Approved
• Load Class Roadway 0-2m Fill Cover
• Exposure B2
• For Placement Refer to Installation Guide
• Lifting – 4 x 2.5T Swiftlift Anchors
Precast Headwalls are available to suit the range.
Available Lengths
2400
1200
1480
1200
150
100
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
BOX CULVERT HEADWALLS
RCBC HEADWALLS
O.D.OF BOX HEADWALL OPENING WEIGHT SIZE I.D. CULVERT INCL. TOLERENCE (KG)
450 x 225 700 x 375 750 x 415 400
450 x 300 700 x 450 750 x 490 400
450 x 375 700 x 525 750 x 565 400
600 x 225 850 x 375 900 x 415 430 600 x 300 850 x 450 900 x 490 600
600 x 375 850 x 525 900 x 565 600 600 x 450 850 x 600 900 x 640 600
750 x 225 1000 x 375 1050 x 415 430 750 x 300 1000 x 450 1050 x 490 600
750 x 375 1000 x 525 1050 x 565 600 750 x 450 1000 x 600 1050 x 640 600
750 x 600 1000 x 750 1050 x 790 815
900 x 225 1150 x 375 1200 x 415 600
900 x 300 1150 x 450 1200 x 490 600 900 x 375 1150 x 525 1200 x 565 600
900 x 450 1150 x 600 1200 x 640 600 900 x 600 1150 x 750 1200 x 790 1400
900 x 750 1150 x 900 1200 x 940 1400
1200 x 225 1500 x 375 1550 x 415 430 1200 x 300 1500 x 450 1550 x 490 600
1200 x 375 1500 x 525 1550 x 565 600
1200 x 450 1500 x 600 1550 x 640 600 1200 x 600 1500 x 750 1550 x 790 2500
1200 x 750 1500 x 900 1550 x 940 2500 1200 x 900 1500 x 1050 1550 x 1090 2500
2100 x 600 2350 x 775 2400 x 800
2400 x 900 2650 x 1075 2700 x 1100
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
Rebated 15mm for Connector Plate
PRECAST INTERLOCKING KERB
End Cone
Interlocking Kerbs are used on roads for temporary lane
diversions /
construction sites.
Optional fencing can be installed using the loc
socket system for barrier mesh or
steel mesh fencing.
2 x 16mm S/S Thread Anchors 1 x 1.3T Swiftlift
Anchor
480
1000
40
200
480
8TM 300 Mesh
Connector Plate: 50x5 Gal Flat Bar
w/- 2 x 20mm Holes
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
1650
2 x 1.3 Swift Lift Anchors Location Holes
2 x 20 Dia at 260 from ctrs
100 200
PRECAST 1650mm WHEELSTOP
• Manufactured to Aust. Std's AS/NZS2890.1:2004
• Bitumen surface mounting recommend 200 long x 16 Dia Galv Drive Pins x 2
• Concrete surface mounting recommend 16mm sleeve anchor or 12mm Hex Head Screw Bolt
Approx Weight 81Kg
Head Office:
4 Quarry Road STAPYLTON QLD
PO Box 167 BEENLEIGH QLD 4207
P: (07) 3804 6622 F: (07) 3804 6699
e: info@cmconcrete.com.au w: cmconcrete.com.au
Branch Office:
13-15 Enterprise Drive
BEAUDESERT QLD 4285
C-M Light Pole Base For Cross Falls – 1:2 & 1:4
• Maximum Pole Height: 10mtr • Concrete: N40 • TMR Drawing: 1393
Cross Fall Type Weight
1:2 Type 2 650Kg 1:4 Type 4 540Kg
560 700
1100
325 470
1100
Type 2
Type 4
860
1260
120
Plan View