Post on 09-Oct-2020
transcript
Carolina FRAMELESS SHOWER DOOR HINGES
The FHC Carolina Series “Heavy Duty“ Frameless Shower Door Hinges have a industry standard beveled edge design with radiused corners for use with 3/8" to 1/2" tempered glass. Four popular finishes to select from along with custom plated finishes also available upon request. The Carolina Series Hinges are offered in four wall mount and glass to glass mount configurations that supports traditional rectangular style glass cutouts along with the preferred “mouse ear” cutout option. All hinges come with a reversible 5 degree pivot pin the doesn’t require special tools for jobs that require a firmer positive position against the jamb or seal. All FHC shower door hinges are made from solid brass construction with a “state of the art” plating process. All internal components are stainless steel construction with no internal plastic parts for longevity.
P.O. Box 1906, South Gate, CA 90280 Toll Free: (888) 295-4531 | Fax: 323 336-8307 | Web: fhc-usa.com
MAXIMUM DOOR CAPACITY
3/8" (10 mm) GLASS 1/2" (12 mm) GLASS
WEIGHT WIDTH WEIGHT WIDTH
USING 2 HINGES 110 LBS. (50 kg) 36" (914 mm) 110 LBS. (50 kg) 36" (813 mm)
USING 3 HINGES 140 LBS. (64 kg) 36" (914 mm) 140 LBS. (64 kg) 36" (914 mm)
NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.
• Heavy-Duty Beveled Body Profile 3-15/16" Tall With Radius Corners
• Heavy-Duty Design For Wider and Heavier Doors
• Designed For 3/8" to 1/2" Tempered Glazing
• Four Popular Finishes to Select From, Custom Finishes Also Available
• Self-Centering within 15 Degrees of Closing Position
• For Use in Residential Bath and Commercial Hotel Applications
• Reversible 5 Degree Pivot Pin that Doesn’t Require Special Tools
• High Quality Solid Brass Construction with “State-of-the-Art” Plating Process
P.O. Box 1906, South Gate, CA 90280 Toll Free: (888) 295-4531 | Fax: 323 336-8307 | Web: fhc-usa.com
ITEM NO. CLNF1Wall Mount Full Back Plate Hinge Standard Closing Position Model
ITEM NO. CLN02Wall Mount Offset Back Plate Hinge Standard Closing Position Model
ITEM NO. CLNF5Wall Mount Full Back Plate Hinge 5 Degree Factory Set Positive Close Model
FHC Carolina Glass to Wall HingesCAROLINA FRAMELESS SHOWER DOOR HINGES
ITEM NO. CLN180180 Degree Glass to Glass Hinge Standard Closing Position Model
ITEM NO. CLN9090 Degree Glass and Glass Hinge Standard Closing Position Model
FHC Carolina Glass to Glass Hinges
SpecificationsGlass Sizes: 3/8" to 1/2" (10 to12 mm) Tempered Glass OnlyConstruction: Solid BrassClosing Type: Self-Centering When Within 15 Degrees of Closed PositionCutout Required: Specific Cutout Templates Available at fhc-usa.comIncludes: Hinge body, glazing gaskets, wall mounting screws, allen head/phillips head cover plate screws, and fabrication templateUse: Residential Bath and Commercial Hotel Applications
GASKET SPECIFICATIONS:For 3/8" (10 mm) Glass: Use One Thick Gasket On Each SideFor 1/2" (12 mm) Glass: Use One Thin Gasket On Each Side
MAXIMUM CAPACITY:
BRUSHED NICKEL
OIL RUBBED BRONZE
MATTE BLACK
POLISHED CHROME
Available Finishes
For Technical Support Call Toll Free in the U.S.
(888) 295-4531
Use Only Monolithic
Tempered Glass
ITEM NO. CLN135135 Degree Glass to Glass Hinge Standard Closing Position ModelPROFESSIONAL GRADE
LIT0
067
04.2
0
Beveled Profile Design With Radius Corners
FO
R H
EA
VI E
R A N D WI D
ER
DO
O
RS
FO
R H
EA
VI E
R A N D WI D
ER
DO
O
RS
ITEM NO. CLN06Wall Mount Offset Short Back Plate Hinge Standard Closing Position Model