Post on 23-May-2018
transcript
2010-2011Corporate and Product Guide
Pro-face Software“All-in-one” Software
FP3000 Series Industrial Flat Panel Display
APL3000 / PS3000 Series Industrial PC
AGP3000 / LT3000 Series Touch PLC
AGP3000 / AST3000 / GP4000 SeriesTouch HMI
The advent of the 3000 Series heralds a revolution in production environments. Oriented around its displays, it gives an enormous boost to “Visualisation” on the manufacturing floor. The 3000 Series was born to meet the ever-increasing demandsfrom markets. Ever since we released the world’s first programmable display, Pro-face has continued to be a leader in providing a product lineup featuring the latest technology and functions. Revolutionise your production with the new “Innovation 3000”
01
ATouch HMI
Industrial PCIndustrial PC
Touch PLC Industrial Flat Panel Display
0202
“All-in-one” HMI Software
Data management software
Touch HMIMulti-Driver
Touch PLC-FieldBus I/Os
Touch PLCCompact
Contents
Basic Touch HMIMulti-Driver
LT
3000 SERIES
3000 SERIES
3000 SERIES
3000 SERIES
Page
Page
03
09Page
11
Industrial PCCompact
PS3000 SERIES
Page
13
A A
A
GP
GP
ST
4000 SERIESGP
Page
08
09PagePage
15
09PagePage
22
Industrial Flat Panel Display
FP
Page
14
3000 SERIES
Handy Multi-Driver
Touch HMI
3000H SERIES
Page
07
AGP
Industrial PCModular
APL3000 SERIES
Page
12
Touc
h HMI
Softw
areInd
ustri
al PC
sTo
uch P
LC
Runtime engine09
PagePage
21
Remote monitoring software09
PagePage
21
WinGP
GP4000 Series Touch HMI Multi-Driver
03
DC24V
AGP-3750T
TFT Colour XGA
395W x 294H x 60D
1024 x 768 pixels
65 536 colours
16 MB FEPROM
AGP3750-T1-AF
AGP3750-T1-D24
AGP-3650T
TFT Colour SVGA
800 x 600 pixels
65 536 colours
10 MB FEPROM
AGP3650-T1-AF
AGP-3600T
TFT Colour SVGA
800 x 600 pixels
65 536 colours
16 MB FEPROM
DC24V
AGP3600-T1-D24
AGP-3560TAGP3560-T1-AF
TFT Colour SVGA
800 x 600 pixels
10 MB FEPROM
65 536 colours
AGP-3450T
TFT Colour VGA
640 x 480 pixels
65 536 colours
10 MB FEPROM
DC24V
AGP3450-T1-D24
AGP-3400T/S
DC24V
AGP3400-T1-D24AGP3400-S1-D24
AGP-3300T/SAGP3300-T1-D24 AGP3300-S1-D24
Colour QVGA
320 x 240 pixels
65 536 4096 colours (3300S)
colours (3300T)
6 MB FEPROM
DC24V
313W x 239H x 56D 313W x 239H x 56D 270.5W x 212.5H x 57D
215W x 170H x 60D
Colour VGA
640 x 480 pixels
65 536 4096 colours (3400S)
colours (3400T)
16 MB FEPROM
215W x 170H x 60D 167.5W x 135H x 59.5D
VM unit optional VM unit optional
SIO 2 ch Ethernet
USB x 2Expansion unit
Video In Sound In
VM unit optional CF card
USB x 2
CF card
SIO 2 ch Ethernet
Expansion unit
USB x 2
CF card
SIO 2 ch Ethernet
Expansion unit
Video In Sound In
USB x 1
CF card
SIO 2 ch Ethernet
Expansion unit
AC 100-240V
AC 100-240V
AC 100-240V
4 drivers simultaneous 4 drivers simultaneous
4 drivers simultaneous 2 drivers simultaneous
AUX / Sound Out AUX / Sound Out AUX / Sound Out
USB x 1
CF card
SIO 2 ch Ethernet
Expansion unit
Video In Sound In
AUX / Sound Out
USB x 1
CF card
SIO 2 ch Ethernet
Expansion unit
AUX / Sound Out
AGP3000Touch HMI Multi-driver
AGP-3360TAGP3360-T1-D24
TFT Colour VGA
640 x 480 pixels
65 536 colours
8 MB FEPROM
DC24V
167.5W x 135H x 59.5D
AGP-3310TAGP3310-T1-D24
TFT Colour VGA
640 x 480 pixels
65 536 colours
8 MB FEPROM
DC24V
167.5W x 135H x 59.5D
USB x 1
CF card
SIO 2 ch Ethernet
Expansion unit
AGP-3300UAGP3300-U1-D24
TFT Colour High brightness
320 x 240 pixels
65 536 colours
6 MB FEPROM
DC24V
167.5W x 135H x 59.5D
USB x 1
CF card
SIO 2 ch Ethernet
Expansion unit
Ultra High-Brightness
USB x 1
CF card
SIO 2 ch Ethernet
Expansion unit
Video In Sound In
AUX / Sound Out
15-inch 12.1-inch 10.4-inch
7.5-inch 5.7-inch
MULTI
MEDIA
MULTIMEDIA
MULTI
MEDIA
MULTI
MEDIA
MULTIMEDIA
SIO 2 ch Ethernet
USB x 2Expansion unit
Video In Sound In
VM unit optional CF card
AUX / Sound Out
AGP-3650U
TFT Colour SVGA
800 x 600 pixels
65 536 colours
10 MB FEPROM
DC24V
AGP3650-U1-D24
313W x 239H x 56D
VM unit optional
USB x 2
CF card
SIO 2 ch Ethernet
Expansion unit
AUX / Sound Out
ULTRA
BRIGHT
ULTRA
BRIGHT
Video In Sound In
Ultra High-Brightness
0204
4 drivers simultaneous
AGP-3510TAGP3510-T1-AF
800 x 600 pixels
16 MB FEPROM
65 536 colours
TFT Colour SVGA
AGP-3500TAGP3500-T1-D24
640 x 480 pixels
16 MB FEPROM
DC24V DC24V
65 536 colours
TFT Colour VGA
AGP-3500SAGP3500-S1-D24
STN Colour VGA
640 x 480 pixels
4096 colours
16 MB FEPROM
AGP-3500LAGP3500-L1-D24
B/W VGA
640 x 480 pixels
16 shades of grey
16 MB FEPROM
DC24V
AGP-3300LAGP 3300-L1-D24
AGP-3301LAGP 3301-L1-D24
320 x 240 pixels
6 MB FEPROM
16 shades of grey
B/W QVGA
AGP-3302BAGP3302-B1-D24
320 x 240 pixels
6 MB FEPROM
16 shades of blue
Blue Mode QVGA
DC24V DC24V
313W x 239H x 56D270.5Wx 212.5H x 57D 270.5W x 212.5H x 57D 313W x 239H x 56D
167.5W x 135H x 59.5D 167.5W x 135H x 59.5D 167.5W x 135H x 59.5D
AGP-3550TAGP3550-T1-AF
TFT Colour VGA
640 x 480 pixels
10 MB FEPROM
65 536 colours
270.5W x 212.5H x 57D
VM unit optional VM unit optional VM unit optional
USB x 2
CF card
SIO 2 ch Ethernet
Expansion unit
Video In Sound In
USB x 2
CF card
SIO 2 ch Ethernet
Expansion unit
USB x 2
CF card
SIO 2 ch Ethernet
Expansion unit
USB x 2
CF card
SIO 2 ch Ethernet
Expansion unit
USB x 2
CF card
SIO 2 ch Ethernet
Expansion unit
B/W QVGA
320 x 240 pixels
16 shades of grey
6 MB FEPROM
DC24V
USB x 1
CF card
SIO 2 ch Ethernet
Expansion unit
CF card
USB x 1
SIO 2 ch
Expansion unit
AGP-3301SAGP3301-S1-D24
STN Colour QVGA
320 x 240 pixels
4096 colours
6 MB FEPROM
DC24V
167.5W x 135H x 59.5D
USB x 1
CF card
SIO 2 ch
Expansion unit
AC 100-240V
AC 100-240V
AUX / Sound Out AUX / Sound Out AUX / Sound Out AUX / Sound Out AUX / Sound Out
AGP-3200TAGP3200-T1-D24
320 x 240 pixels
6 MB FEPROM
256 colours
TFT Colour QVGA
DC24V
AGP-3200AAGP3200-A1-D24
320 x 240 pixels
6 MB FEPROM
8 shades
Amber QVGA
DC24V
130W x 104H x 40D 130W x 104H x 40D
USB x 1
SIO 1 ch Ethernet
USB x 1
SIO 1 ch Ethernet
2 drivers simultaneous3.8-inch
MULTIMEDIA
USB x 1
SIO 2 ch
Expansion unit
25 models Multimedia or Standard - 6 screen sizes.
PLC(Company A) PLC
(Company B)
DIO on FLEX NETWORK CANopen NETWORK or
PLC(Company C)
Can be connected to 16 devices through the RS-422/485 port.
Communicate with up to four types of device
*5.7 inch models enable simultaneous communication with up to two devices.
Temperature and Process Controllers (manufactured by Company D)
Data communication
Communicate simultaneously with four devices and manage allinformation with one unit. Pro-face is the leader in thenumber of communication drivers supported.
.
Ethernet
RS-422RS-232C AGP3000 Serie
CANopen workFlex-Network
AGP3xx0-xx-xx-CA1M AGP3xx0-xx-xx-FN1M
-Net
The AGP3000 series enablesmonitoring and operation of alldevices on the same screen.
63 nodes maximum
4 drivers simultaneous
1
3 4
2
AGP3000AGP3000 : Key Features
RGB2ch input unit GP3000 VM unit & DVI input unit
. USB -> flash memory
. USB -> CF card .
Screen data transfer
Modem
Factory
Office
Modem
Transfervia modem
Transfer via USB
File management
File manager
Applications
Attach a USB cable to the readily accessible panel- Mounted USB port (CA5-USBEXT-0)
Screen data transfer via modem for USB.
Packing
Nut
Panel Waterproof capNumerous applications are available, including the following:
Transfer screen data.Collect log data.Change recipes.Manage Movie files.
- It’s possible to input RGB video images to 2 channels and display them.- Convert input resolution resolution and display images (EX.XGA->SVGA)
(*)Video unit is only available with AGP3750T, AGP36**T, AGP35**T
4ch NTSC inputs and 1ch DVI input/DVI output equipped
1ch DVI inputequipped
GP3000 VM unit
More interfaces are available
Ultra high brightness
CF Card
AUX/soundOutput Interface
Serial Interface
Expansion Unit Interface
VM Unit Interface
Ethernet
USB x 2
These interfaces simplify connection to existing well as system additions and future expansion.
systems as
The 5.7-inch model has an ultra high-brightness TFT LCD screen of 1000 cd/m2 and the 12.1-inch model has an ultrahigh-brightness TFT LCD screen of 800 cd/m2(for liquid crystal part only). These screens allow you to use this HMI in a broad range of environments, including well-lit locations.
Note: Available interfaces vary by Model. The photo shows the interfaces for theAGP-3650T (AC). For a list of the compliant models, please refer to our website.
Video unit
File management
DVI input unit
(*) (*)
5.7" - candela/m2 12.1" - candela/m2cd/m2
Ultra high-brightness model
cd/m2
Standardmodel
Ultra high-brightness model
Standardmodel
05
.
0206
AGP3000 SeriesDriver List
(*1) WinGP needs the external adapter 700-881-MPI11 [MPI Ethernet Adapter (NETLink PRO)]. (*2) Variables are not supported for monitoring devices
GP Pro EX
AGP WinGPDeviceMonitor
PassThroughManufacturer Driver name
PLCs
A Series CPU Direct
A Series Ethernet
A Series Computer Link
FX Series CPU Direct
FX Series Ethernet
Q Series CPU Direct
Q/QnA Serial Communication
Q/QnA Series Ethernet
Q/QnA Series CPU Direct
QUTE Series CPU Direct
Series 90 Ethernet
Series 90-30/70 SNP
Series 90-30/70 SNP-X
MICREX-F Series SIO
KV-700/1000/3000/5000 Series CPU Direct
SAIA S-Bus SIO
KV-700/1000/3000/5000 Series Ethernet
MICREX-SX Series SIO
MICREX-SX Series Ethernet
MP Series Ethernet (Extension)
MEMOBUS Ethernet
MP Series SIO (Extension)
FP Series Computer Link SIO
Personal computer Link SIO
Personal computer Link Ethernet
JW Series Computer Link SIO
JW Series Computer Link Ethernet
TOYOPUC CMP-LINK SIO
TOYOPUC CMP-LINK Ethernet
S10V Series Ethernet
S10 Series SIO
Q Series QnU CPU Ethernet
DIASYS Netmation Modbus TCP
FX Series Computer Link
Inverter SIO
H Series SIO
H Series Ethernet
Inverter Modbus RFU
Inverter ASCIJ SIO
KV-10_80RW/TW CPU Direct
MEMOBUS SIO
C/CV Series HOST Link
CS/CJ Series Ethernet
CS/CJ Series Ethernet IP
SIMATIC S7 3964(R)RK512
SIMATIC S7 Ethernet
SIMATIC S5 CPU Direct
DF1
EtherNet / IP
DH-485
Modbus Slave (TCP/SIO)
Modbus SIO Master
Modbus TCP Master
Uni-Telway
TwinCAT ADS/AMS
SIMATIC S7 MPI Direct
SIMATIC S5 3964(R)RK512
CS/CJ Series HOST Link
MHI Step 3 Ethernet
KV series CPU direct
Siemens AG
Omron
Rockwell Automation
Schneider Electric
Mitsubishi
Beckhoff
Mitsubishi Heavy Ind.
Saia Burgess
Keyence
GE Fanuc Aut.
FujiElectric
Yaskawa
Hitachi Indus.Equipment Systems Co.
Hitachi
Matsushita(Pana.)
Yokogawa
Jtekt
Sharp
(*1)
(*2)
(*2)
(*2)
Industrial Robot
Hi4 Robot
ROBO CYLINDER Modbus SIO
Hyundai Heavy Ind.
X-SEL ControllerIAI Corporation
GP Pro EX
AGP WinGPDeviceMonitor
PassThroughManufacturer Driver name
Other devices
Memory Link
General EthernetDigital Elect.Corp
General SIO
GP Pro EX
AGP WinGPDeviceMonitor
PassThroughManufacturer Driver name
Inverter
FREQROL Inverter
Inverter SIO
Mitsubishi Elec.CorpYaskawa Elec.Corp
GP Pro EX
AGP WinGPDeviceMonitor
PassThroughManufacturer Driver name
Lenze Lecom 2102 series
Fieldbus
Profibus Int. PROFIBUS DP Slave
DeviceNet SlaveODVA
CC Link Partner Ass CC Link intelligent device
Modbus- IDAGeneral Modbus RTU SIO Master
General Modbus TCP Master
GP Pro EX
AGP WinGPDeviceMonitor
PassThroughManufacturer Driver name
Ethernet IP explicit messaging
CAN in Automation CANopen Slave
PLCs
GP Pro EX
AGP WinGPDeviceMonitor
PassThroughManufacturer Driver name
UNISEQUE SERIES Ethernet
Power mate Series
TC Series (TCmini/TC200)
Computer Link SIO
Computer Link Ethernet
KOSTAC/ DL series CCM SIO
KOSTAC/ DL series modbus TCP
FB Series SIO
Meidensha
Fanuc Ltd
Toshiba
Fatec Automation Co
Koyo Electronics
Toshiba Machine Co
Control Technology corp. CTC Binary Protocol
LS Industrial systems
MASTER-K Series Cnet
XGT Series FENet
XGT Series Cnet
Control Techniques Modbus SIO - including CMP routing command
CoDeSysAutomation Alliance
CoDeSys SIO
CoDeSys TCP
For latest drivers, please refer to http:\\www.proface.eu/support-download/drivers/
Temperature and Process Controllers
Temp.Controller RKC SIO
Temp.Controller CompoWay/F
RKC Instrument
OmronTemp.Controller Modbus SIO
Personal computer Link Ethernet
Controller SIOShinko Technos
Yokagawa Elec.C
Temp. Controller Modbus SIOChino Corporation
Fuji Electric Systems Co. Temp. Controller Modbus SIO
GP Pro EX
AGP WinGPDeviceMonitor
PassThroughManufacturer Driver name
Yamatake
Modbus SIO master
Modbus TCP Master
Digital Controller SIO
Easy software
P15
DC24V
AGP-3310HT
TFT Colour VGA
640 x 480 pixels
65 536 colours
8 MB FEPROM
AGP 3310H-T1-D24
224W x 174H x 87.1D
USB x 1
CF card
SIO ch x 1 Ethernet
DC24V
AGP-3300HS
STN Colour QVGA
320 x 240 pixels
4096 colours
6 MB FEPROM
AGP 3300H-S1-D24
224W x 174H x 87.1D
USB x 1
CF card
SIO ch x 1 Ethernet
DC24V
AGP-3300HL
Monochrome QVGA
320 x 240 pixels
16 shades of grey
6 MB FEPROM
AGP 3300H-L1-D24
224W x 174H x 87.1D
USB x 1
CF card
SIO ch x 1 Ethernet
5.7-inch
Designed for superb portability with a lightweight, easy-to-use cable. Includes a practical and high speed Ethernet port for data handling and networking configuration. Designed with a focus on safety. High-resolution 5.7-inch VGA display available.
The emergency stop switch securely stops the machine when a circuit fault or other emergency occurs.
device necessary during trouble shooting and testing. The ready signal is given only in distant middle position.
The Handy Panel is equipped with an ergonomical three postion
The key switch allows you to move the device without triggering the emergency stop.
AGP3000H range: Key points
Emergency Stop Switch
Dimensions
Three position device
ID control function located onthe adapter gives the possibility to install many adapters on production line and check on which adapter the Handy is connected.
The E-stop buttonactivate 2 positiveopening safetycontacts (NF) and 1 auxiliarycontact (NO)
2 positive openingsafety contacts provideenhanced safety.
Open
Closed
OFF
OFF
ONMiddle position
TFT colour LCD
640 X 480 VGA
TFT colour LCD
640 X 480 VGA
STN colour LCD
320 x 240 QVGA
3.8
"
Unit:mm [in.]
External Dimensions
224[8.82]
17
4[6
.85
]
10
7.5
[4.2
3]
87
.1[3
.43
]
Adapter
25[0.98] 64[2.52]
113[4.45] 44[1.73] 56[2.20]
14
4[5
.67
]
90
[3.5
4]
41
[1.6
1]
1 211
8 9 10
12
1413
7
34
5
6
AGP3000H
Display Touch Panel Status LED Operation LED Operation switch Function switch Emergency switch Key switch CF card cover 3-position Enable switch GP3000H-cable I/F Ethernet I/F Serial I/F (COM1)
For non safety application,the color of the switch canbe selected betweengrey or uncolored: The switch is removable
2 drivers simultaneous
Monochrome LCD
320 x 240 QVGA
1011121314
CF card Access LED
12
3456789
5.7-inch
Handy Touch HMI Multi-driver
07
08
Easy software
P15
AST3000
AST-3201AAST3201-A1-D24
Amber/red QVGA320 x 240 pixels 8 shades
AST-3211A
320 x 240 pixels
130W x 104H x 40D 6 MB 6 MB 130W x 104H x 40D
Amber/red QVGA
8 shades
2 drivers simultaneous
AST32 1-A1-D241
3.8-inch2 drivers simultaneous5.7-inch
AST-3302BAST3302-B1-D24
Blue mode QVGA320 x 240 pixels 8 shades
167.5W x 135H x 59.5D 6 MB
USB 1x
SIO 1 x RS232
SIO 1 x RS485 / MPI
USB 1x
SIO 1 x RS232
SIO 1 x RS422/485
USB 1x
SIO 1 x RS232
SIO 1 x RS485 / MPI
Basic Touch HMI Multi-driver
3,8" AST dimensions
Status LED
USB (Host)
Serial COM1
Serial COM2
Power Plug
Panel cutout
GP4000GP4000 series Touch HMI Multi-driver
GP410xGGP4105G1D (RS232)
green/orange/red STN 200 x 80pixels 16 shades
116.5W x 77.5H x 28D 2 MB
New generation Touch HMI - Ultra compact 3.4-inch
USB 1x type A
USB1 x mini B
SIO 1 x
66 [
2.6
0 ]
105 [4.13 ]+1-0
+1 -0
Under 4-R
3
A B
116.5 [4.59]
77.5
[3.0
5]
104.5 [4.11]65.5
[2.5
8]
4.5
[0.18]
28 [1.10]
GP4105GP4106
GP4107
+0.
04- 0
+0.04- 0
C
D
3,4" GP4100 dimensions
Vertical or horizontalinstallation
Panel cutout
D
E FC
D
C
Powerconnect
USB (type A)
Serial COM1
USB (mini B)
Touch
A
B
C
D
E
F
Display
GP4106G1D (RS422/485)GP4107G1D (RS485/MPI)
GP410xWGP4105W1D (RS232)
white/pink/red STN 200 x 80pixels 16 shades
116.5W x 77.5H x 28D 2 MB
USB 1x type A
USB1 x mini B
SIO 1 x
GP4106W1D (RS422/485)GP4107W1D (RS485/MPI)
You can easily transport data ( HMI project or process data)with commercially available USB storage media.
Easy transfer of screendata (HMI project) without PC
B
C
D
E
F
Easy transfer of screendata (HMI project) without PC
Screen data transfer is also available for 4000 series. A USB extension cable (item : CA5-USBEXT-01) can be installed to the front of the cabinet for maintenance without opening the cabinet
DC24V DC24V DC24V
DC24V DC24V
AGP-3300LAGP3300-L1-D24-D81CAGP3300-L1-D24-CA1MAGP3300-L1-D24-FN1M
DC24V
B/W QVGA
320 x 240 pixels
6 MB FEPROM
16 shades of grey
167.5W x 135H x 59.5D
SIO 2 ch
USB x 1
CF card
Ethernet
Expansion Unit
DC24V
AGP-3600TAGP3600-T1-D24-D81CAGP3600-T1-D24-CA1MAGP3600-T1-D24-FN1M
TFT Colour SVGA
800 x 600 pixels
65 536 colours
16 MB FEPROM
313W x 239H x 56D
SIO 2 ch
USB x 2
CF card
Ethernet
FN1M: Flex Network
Expansion Unit
VM unit optional
D81C: DIO
CA1M: CANopen Network
AGP3000
HTB1C0DM9LP- 12 inputs configurable as :. Fast counter 5 Khz (up/down). Fast counter 20 Khz (up/down, 2 phases, frequency meter)
- 8 outputs. 6 Relay output . 2 source output configurable as PWM
7 EXM modules max.
4 drivers simultaneous
AUX / Sound Out
FN1M: Flex Network
D81C: DIO
CA1M: CANopen Network
12.1-inch
CANopen Slave Unit
DC24V
AGP-3600UAGP3600-U1-D24-CA1M
TFT Colour SVGA
800 x 600 pixels
65 536 colours
16 MB FEPROM
313W x 239H x 56D
SIO 2 ch
USB x 2
CF card
Ethernet
Expansion Unit
VM unit optional
CA1M: CANopen Network
AUX / Sound Out
ULTRA
BRIGHT
Ultra bright
CANopen slave unit I/O expansionwith EXM I/O modules
Fusion of Graphic Operator and control functions.
EXM-DDI8DT
Inputs
(* ) Other version available: sink output model - EXM-DDO8UT and EXM-DDO16UK.(*2) Removable through terminal connector for all EXM modules except EXM-DDO16TK (MIL connector) and EXM-DMM24DRF (terminal block).
1
8 16
8 source 16 source
EXM-DDI16DT EXM-DDO8TT EXM-DDO16TK
4 drivers simultaneous
AGP-3500SAGP3500-S1-D24-D81C
DC24V
AGP3500-S1-D24-CA1M
640 x 480 pixels
16 MB FEPROM
4096 colours
STN VGAColour
313W x 239H x 56D
SIO 2 ch
USB x 2
CF card
Ethernet
Expansion Unit
D81C: DIO
CA1M: CANopen Network
AUX / Sound Out
AGP-3500LAGP3500-L1-D24-D81C
DC24V
640 x 480 pixels
16 MB FEPROM
16 shades of grey
B/W VGA
313W x 239H x 56D
SIO 2 ch
USB x 2
CF card
Ethernet
Expansion Unit
D81C: DIO
AUX / Sound Out
10.4-inch
Digital input / output modules
Outputs
Output range0.3 A / output
(*1) (*1)
EXM-AMO1HT
Inputs
EXM-AVO2HT EXM-AMI2HT EXM-AMM3HT
Analog input / output modules
Resolution
Input range
Add-on I/O modules
Outputs
Resolution
Output range
2
1 2 1
12 bits 11 bits + sign 12 bits
0..10 V / 4..20 mA -10 V..+10 V 0..10 V / 4..20 mA
2
12 bits 12 bits
0..10 V / 4..20 mA 0..10 V / 4..2 0mA
1 common - 3 A / common0.1 A / output
1 common - 1 A / common
AGP-3500TAGP3500-T1-D24-D81C
DC24V
AGP3500-T1-D24-CA1MAGP3500-T1-D24-FN1M
TFT VGAColour
640 x 480 pixels
16 MB FEPROM
65 536 colours
270.5W x 212.5H x 57D
SIO 2 ch
USB x 2
CF card
Ethernet
Expansion Unit
VM unit optional
FN1M: Flex Network
D81C: DIO
CA1M: CANopen Network
AUX / Sound Out
09
AGP-3300T
DC24V
AGP3300-T1-D24-D81CAGP3300-T1-D24-CA1MAGP3300-T1-D24-FN1M
AGP-3300SAGP3300-S1-D24-D81C
DC24V
AGP3300-S1-D24-CA1M
You can easily add a variety of control devices. For the DIO type, you can directly connect various components such as buttons and lamps. In addition the FLEX NETWORK type allows space-saving connections with less wiring.
Lamps
Relay
TFT QVGAColour
320 x 240 pixels
6 MB FEPROM
65 536 colours
167.5W x 135H x 59.5D
SIO 2 ch
USB x 1
CF card
Ethernet
Expansion Unit
STN QVGAColour
320 x 240 pixels
6 MB FEPROM
4096 colours
167.5W x 135H x 59.5D
SIO 2 ch
USB x 1
CF card
Ethernet
Expansion Unit
Control functions
Switches
Sensor
63 nodes (CANopen devices)
DIO type (-D81C)DIO (sink) type: 6 inputs/2 outputsDIO (source) type: 6 inputs/2 outputs
Flex Network type (-FN1M)Maximum number of expandible I/O:512 bit I/O128 integral I/O
Opening toward various PLCsEvery protocol available on the AGP series can be integrated into the LADDER.
CANopen Network type (-CA1M)Maximum number of expandible I/O:512 bit I/O128 integral I/O
Touch PLC
2 drivers simultaneous
FN1M: Flex Network
D81C: DIO
CA1M: CANopen Network
D81C: DIO
CA1M: CANopen Network
5.7-inch
Easy software
P15
8 relay 16 relay 4 relay 8 relay
4 16
EXM-DRA8RT EXM-DRA16RT EXM-DMM8DRT EXM-DMM24DRF
4 drivers simultaneous
AGP-3400T
DC24V
AGP3400-T1-D24-D81CAGP3400-T1-D24-CA1MAGP3400-T1-D24-FN1M
TFT VGAColour
640 x 480 pixels
16 MB FEPROM
65 536 colours
215W x 170H x 60D
SIO 2 ch
USB x 1
CF card
Ethernet
Expansion Unit
FN1M: Flex Network
D81C: DIO
CA1M: CANopen Network
AUX / Sound Out
AGP-3400SAGP3400-S1-D24-D81C
DC24V
AGP3400-S1-D24-CA1M
STN VGAColour
640 x 480 pixels
16 MB FEPROM
4096 colours
215W x 170H x 60D
SIO 2 ch
USB x 1
CF card
Ethernet
Expansion Unit
D81C: DIO
CA1M: CANopen Network
AUX / Sound Out
7.5-inch
(*2) (*2)
EXM-ALM3LT EXM-AMI4LT EXM-AMM6HT EXM-ARI8LT
1 2
12 bits 12 bits
0..10 V / 4..20 mA 0..10 V / 4..20 mA
2 4 4 8
12 bits 12 bits 12 bits 10 bits
Thermocouple
PT100 (3 wires)K,J,T 0..10 V / 4..20 mA
PT100 / PT1000 Ni100 / Ni1000
0..10 V / 0..20 mAPT100 / PT1000Ni100 / Ni1000
2 A / output2 common - 7 A / common
2 A / output2 common - 8 A / common
2 A / output1 common - 7 A / common
2 A / output2 common - 7 A / common
10
Touch PLC Compact LT3000
LT-3201ALT-3300SLT3300-S1-D24 LT3201-A1-D24
STN Colour QVGA
320 x 240 pixels
4096 colours
6 MB FEPROM
167.4W x 135H x 77.6D
USB x 1 SIO 1 ch
Monochrome QVGA
320 x 240 pixels
16 shades of grey
6 MB FEPROM
167.4W x 135H x 77.6D
LT-3300LLT3300-L1-D24
Monochrome QVGA
320 x 240 pixels
16 shades of grey
6 MB FEPROM
167.4W x 135H x 77.6D
LT-3301LLT3301-L1-D24
Amber QVGA
320 x 240 pixels
8 shades
6 MB FEPROM
130W x 104H x 76.5D
Compact
It is a compact palm sized controller, that efficiently utilises panel space. In addition,it is equipped with a 3.8 inch or 5.7 inchLED touchscreen to display not only messages but alsographical data.
All-in-oneThis is a dual function, cost saving high performancedevice. Display, operation and control functions areintegrated into 1 unit that saves wiring and spaceand also reduces the number of electrical connections.
Easy to useBy using only drag and drop operations from the instruction word menucompatible GP-Pro EX development software makes it easy to create andedit ladders as well as create and utilise images. In addition,the enhanced debugging function can also reduce developmenttime.
User-friendly
As a USB interface is built in,it is possible to use USB storage for image transfer and logging, therefore, handling at your work site can be performed without a PC.
MultipleEquipped with 12-point DC inputs and 6-point transistor outputs(16 inputs/16 outputs for 5.7inch models), it is compatible with special I/O. With acceleration and deceleration pulse output at a maximum of 65 kHz, and high-speed counter function performing at 100kHz as standard, it has achieved sophisticated control functions. (Possible to use 4-points at maximum)
Sensor
Limit switch
Temperature (EX modules only)
Emergency button
Encoder
MBtor driver
Pump Solenoid valve
Flow rate/Pressure
Stepping motor
DIO DIO
Module Module
Enhancement of control function
(EX modules only)
ScalabilityWith the EX module I/F, 2 or 3 sets of 13 types of EX modulescan be added on. This enables a high degree of customisation, more than 100 combinations, for a diversity of needs and future expansion.
Ethernet 16 I / 16 O
CANopen master (option)
I/O EXM - max 3 modules (option) I/O EXM - max 3 modules (option) I/O EXM - max 3 modules (option) I/O EXM - max 2 modules (option)
USB x 1 SIO 1 ch
Ethernet 16 I / 16 O
CANopen master (option)
USB x 1 SIO 1 ch
16 I / 16 O
CANopen master (option)
12 I / 6 O
CANopen master (option)
USB x 1
I/O EXM range : see p.10
5.7-inch 3.8-inch
DC24V DC24V DC24V DC24V
11
Size Main Unit Type / Power Supply CPU Expansion
SlotsMemory OthersOS (Pre-installed HDD)
919"
Touch Panel LCD
715"
Touch Panel LCD
CD2G
Core Duo 2.0GHz
CM18Celeron M440
1.86GHz
2PPCI
2 slot
4PPCI
4 slot
2G
2GB
1G1GB
5M512MB
B
B
Battery Unit
612.1"
Touch Panel LCD
0Built-in (BOX)
BABuilt-in Computer
AC Power Supply
BDBuilt-in Computer
DC Power Supply
TAPanel Computer
AC Power Supply
TDPanel Computer
DC Power Supply
KAPanel Computer with Keypad
AC Power Supply
KDPanel Computer with Keypad
DC Power Supply
XM60Windows XP
ML ver.
NO60
EM2GWindows XP
Embedded ML ver. (2GB)
9 TA CD2G 4P 2G XM60 B
Industrial PC Modular
5.7-inch
Windows 2000
Windows XP
Windows XP Embedded
APL-3900T
DC24V
AC 100-240V
Windows 2000
Windows XP
Windows XP Embedded
APL-3700T
DC24V
AC 100-240V
Windows 2000
Windows XP
Windows XP Embedded
APL-3600T
DC24V
AC 100-240V
TFT SXGAcolour
CPU: Intel Core Duo 2.0 GHz / Celeron M440 1.86 GHz
1280 x 1024 pixels
262.144 colours
512 MB / 1 GB / 2 GB / 4GB DDR
2 slots: 460W x 390H x 181.2D
SIO 4 ch
Sound out
CF card x 1
PCI X 2 / 4*Ethernet x 2DVD-ROM x 1
USB x 5 RAS port
4 slots: 460W x 390H x 233.2D
TFT XGAcolour
1024 x 768 pixels
262.144 colours
512 MB / 1 GB / 2 GB / 4GB DDR
2 slots: 425W x 325H x 165.5D
SIO 4 ch
Sound out
CF card x 1
PCI X 2 / 4*Ethernet x 2DVD-ROM x 1
USB x 5 RAS port
4 slots: 425W x 325H x 217.5D
TFT SVGAcolour
800 x 600 pixels
262.144 colours
512 MB / 1 GB / 2 GB / 4GB DDR
2 slots: 338W x 286H x 165.1D
SIO 4 ch
Sound out
CF card x 1
PCI X 2 / 4*Ethernet x 2DVD-ROM x 1
USB x 5 RAS port
4 slots: 338W x 286H x 217.1D
CPU: Intel Core Duo 2.0 GHz / Celeron M440 1.86 GHz CPU: Intel Core Duo 2.0 GHz / Celeron M440 1.86 GHz
Windows 2000
Windows XP
Windows XP Embedded
APL-3700KDC24V AC 100-240V
Windows 2000
Windows XP
Windows XP Embedded
APL-3600KDC24V AC 100-240V
Windows 2000
Windows XP
Windows XP Embedded
APL-3000BDC24V AC 100-240V
TFT XGAcolour
CPU: Intel Core Duo 2.0 GHz / Celeron M440 1.86 GHz
1024 x 768 pixels
262.144 colours
512 MB / 1 GB / 2 GB / 4GB DDR
2 slots: 488W x 367H x 165.5D
SIO 4 ch
Sound out
CF card x 1
PCI X 2 / 4Ethernet x 2DVD-ROM x 1
USB x 5 RAS port
4 slots: 488W x 367H x 217.5D
Number of key switches: 74
TFT SVGAcolour
CPU: Intel Core Duo 2.0 GHz / Celeron M440 1.86 GHz
800 x 600 pixels
262.144 colours
512 MB / 1 GB / 2 GB / 4GB DDR
2 slots: 425W x 325H x 165.5D
SIO 4 ch
Sound out
CF card x 1
PCI X 2 / 4Ethernet x 2DVD-ROM x 1
USB x 5 RAS port
4 slots: 425W x 325H x 217.5D
Number of key switches: 74
CPU: Intel Core Duo 2.0 GHz / Celeron M440 1.86 GHz
512 MB / 1 GB / 2 GB / 4GB DDR
2 slots: 243W x 125.5H x 277D
SIO 4 ch
Sound out
CF card x 1
PCI X 2 / 4Ethernet x 2
DVD-ROM x 1
USB x 5 RAS port
4 slots: 243W x 176.5H x 277D
M
M
Multi DVDUnit
Without OS
* The 4 slots version support the Battery unit * The 4 slots version support the Battery unit * The 4 slots version support the Battery unit
*1 ) The 4 slots version support the Battery unit - *2) A Battery Unit and a soft mirroring unit cannot be used when a SSD unit is used.
Battery Unit+ Multi DVD Drive
19-inch
15-inch
15-inch 12.1-inch
12.1-inch
SSD 16 GBSSD 16 GB (Solide State Drive Unit)
for APL3000 models.
With a big capacity of 16GB, you can use the same operating system and
applications as in the normal PC environment.
APL3000-SD16*2
*1 *1
*1
XM16S
NO16S
SSD unit option
SSD unit option
12
13
Easy software
P15
TFT XGAcolour TFT XGAcolour
CPU: ULV Celeron M 1 GHz
1024 x 768 pixels 1024 x 768 pixels
16.777.216 colours 16.777.216 colours
1 GB / 2 GB DDR 512 MB / 1 GB DDR
256 MB / 1 GB DDR
395W x 294H x 100D 395W x 294H x 60D
TFT XGAcolour
CPU: Celeron M 1.5 GHz
1024 x 768 pixels
262.144 colours
313W x 239H x 103D
256 MB / 1 GB DDR 256 MB / 1 GB DDR
TFT XGAcolour
CPU: ULV Celeron M 1 GHz
1024 x 768 pixels
262.144 colours
313Wx 239H x 60D
TFT SVGAcolour
CPU: ULV Celeron M 1 GHz
800 x 600 pixels
262.144 colours
230W x 177H x 115D (before slot PCI)
TFT SVGAcolour
CPU: ULV Celeron M 600 MHz
800 x 600 pixels
262.144 colours
230W x 177H x 60D
USB x 5SIO ch x 1
PCMCIA x 1 Ethernet x 2
1 slot PCICF card x 1 Sound out
CPU: Pentium M 1.6 GHz
HDD or CF card bootable
HDD or CF card bootable
Windows XP Embedded
Windows XP
PS-3650A
Windows 2000
Windows XP
Windows XP Embedded
PS-3451ADC24V
Windows 2000
Windows XP Embedded
Windows XP
PS-3450A
Windows 2000
Windows XP
Windows XP Embedded
PS-3711ADC24V
DC24V DC24V DC24V
USB x 5SIO ch x 1
PCMCIA x 1 Ethernet x 2
CF card x 1 Sound out Fanless
Windows 2000
Windows XP Embedded
Windows XP
PS-3710AAC
AC AC AC
100-240V
100-240V 100-240V 100-240V
Windows XP
Windows XP Embedded
PS-3651A
HDD or CF card bootable
256 MB / 1 GB 256 MB / 1 GB
USB x 4SIO ch x 2
Ethernet x 2CF card x 2
Sound out Fanless
Floppy + CDCF card x 1
1 Slot PCI Sound out Ethernet x 2PCMCIA x 2
SIO 4 ch USB x 5
RAS port
Sound out
CF card x 1
FanlessEthernet x 2PCMCIA x 2
USB x 5SIO 2 ch
RAS port
USB x 4SIO ch x 2
Ethernet x 2CF card x 2
Sound out 1 slot PCI
CPU: PS3000B = ULV Celeron M 1 GHz
PS3000B = 255W x 164H x 124DPS3001B = 255W x 164H x 68.8D
Windows XP
Windows XP Embedded
PS-3000B / PS-3001B
Sound out
CF card x 2
PS3000B
1 slot PCI
Ethernet x 2PCMCIA x 2
USB x 5SIO 2 ch
RAS port
PS3001B
Fanless
PS3001B =ULV Celeron M 600 MHz
DC24V AC 100-240V
DC24VAC 100-240V
select "S" model for SIO ch x 2 - No RAS port
15-inch
12.1-inch 8.4-inch
SSD 16 GBSSD 16 GB (Solide State Drive Unit) for PS3000 models. With a big capacity of 16GB, you can use the same operating system and
applications as in the normal PC environment.
PS371XA-SD16P
RAS port RAS port
Supporting the battery unit
select "S" model for SIO ch x 2 - No RAS port
Supporting the battery unit
Industrial PC Compact PS3000
SSD 16 GBSSD 16 GB (Solide State Drive Unit) for PS3000 models. With a big capacity of 16GB, you can use the same operating system and
applications as in the normal PC environment.
0214
TFT colour SXGA TFT colour XGA
1280 x 1024 pixels 1024 x 768 pixels
16.777.216 colours 16.777.216 colours
460W x 390H x 77.7D 395W x 294H x 60D
USB x 1 USB x 1
USB x 1
SIO ch x 1
SIO ch x 1
SIO ch x 1
317W x 243H x 58D
TFT VGAcolour
640 x 480 pixels
262.144 colours
SIO ch x 1 USB x 1
DC24V
FP-3600TFP3600-T41-24V
AC 100-240V
FP-3710TFP3710-T42-U
TFT colour SVGA
800 x 600 pixels
262.144 colours
317W x 243H x 58D
FP3500-T41-24V
FP-3500TDC24V
FP-3900TAC
100-240VFP3900-T41-U
FP3000Industrial Flat Panel Display
Keypad model
TFT colour XGA
1024 x 768 pixels
16 M colours
395W x 294H x 60D
USB x 1SIO ch x 1
AC
100-240V
FP-3710KFP3710-K41-U
Number of key switches: 74
Touchmonitor
USB x 1SIO ch x 1
FP-3650T
TFT colour XGA
1024 x 768 pixels
262.144 colours
317W x 243H x 58D
AC 100-240VFP3650-T41
19-inch
12.1-inch
15-inch
15-inch
10.4-inch
15
Status Tool Bar
Select between 2 options: Maximize/Minimize.
Sharing Packages
Thumbnail Display
Workspace Switching Tab
Address Mapping
Headers & Footers
Screen creation Software
Main functions
Switches, lights, buttons, displaying / keyboarding of datanumerical / alphanumeric.Trend graph : XY trend graph, zoom function, channel transparency, historical data.Object animation : colour, visibility, rotation, moving, ...Alarm management : historical, multi-line display ...Recipes management, Data sampling.Security: password on each object with different levels.Data storage on CF card.Data export --->PC.Multi-language management.Multi-drivers simultaneously.
Helps to easily create a screen from design to transfer.
Easily switch work spaces, such as system settings and address settings, using tabs.
Preview screens on the thumbnail to eliminate doubts and mistakes.
You can preview screens while creatinga new screen. You can turn the display mode OFF.
Enter images frequently used in the creation of screens (top/bottom), for use anytime on the project.
Adjust address settings using only the mouse.
Configure addresses easily and visually using the drag&drop function
Specify location to save package files. Save files on a server or external media to share with others.
16
Support Function Keys
Property Window
Main functions
F5 Transfer selected parts Ctrl+F5 Create switch parts
F9 Change attributes
F11 Full screen
F12 Simulation
Ctrl+F7 Create data display parts
Shift+F3 Create new screen
.
Customize Tool Bar Settings
Parts Tool Box
Support Function Keys
Property Window
Main functions
F5 Transfer selected parts Ctrl+F5 Create switch parts
F9 Change attributes
F11 Full screen
F12 Simulation
Ctrl+F7 Create data display parts
Shift+F3 Create new screen
New functions - Ver 2.60 SIMATiC STEP 7 Project symbol integration New CANopen network configurator (graphic) Symbol arrays support for symbol - solve limit of 3000 adresses Startup speed improvement All manual in HTML format (better search efficiency)
Logic program integrated with screen management.HMI and LADDER simulation on PC - no need to download to debug / test the project.Selector list: list of choice for actions - easy to use and develop
Use the drag&drop function to easily configure parts you can see in the window.
Select only necessary items to create a tool bar that is easy to use.
Verify various settings all at once and perform editing here.
Allocate functions to function key for each base screen
Resolution is adjusted toautomatically convertproject files. Dramaticallyreduce work involved inchanging to a differentsized model.
Enter frequently used functions into the function keys for editingwithout using a mouse.
Write DXF, DWF filesdownloaded using Visioto GP-Pro EX projectfiles. You can also use CAD data on screens.
Resolution converter
Pro-face converter
18
Instruction Notation List
A
B
Editing is easy!
Exclusive "all-in-one" development tool - HMI and PLC in one shot
Logic Program
GP-Pro EX can also be used to create screen displayprograms using PLC functionalities. All instructiondata computing programs, etc..., Are included.
CANopen network configurator
GP-Pro EX V2.60 include a new CANopen configurator.all network devices selected and configured with the mouse :. Master configuration (network settings). Slave EDS import. Slave selection and configuration. full graphic configurator for Pro-face I/O modules
Import EDS file for each CANopen slave device and manage your own catalogue.Call your technical support to get thelist of devices already tested by Pro-face.
Manage diverse CANopen slave devices
Tree view for all screen types enable smooth navigation and edition for HMI and PLC simultaneously.
Drag and drop parts from graphic screen (parts) to LADDER andadresses are automatically affected.Drag and drop from Ladder elements (contact, coil, timer, ...) tographic screeen and adresses are automatically affected.Drag and drop from Ladder screen to phisical I/Os screen alsoavailable.
Tree view for all Screen (HMI, LADDER, I/Os)
Drag and Drop
A
A
A
B
B
Dynamic LADDER visualisation On-line mode (PC connection)
For development, debugingstage and final programm tests
Touch diagnostic screen (Without PC)
For first diagnostic on site. Maintenance team can check theproblem without PC connection.
Full graphic Pro-face CANopen I/Os configurator
Easy graphic I/Os extension modules (EXM series). Theposition of each module on the rack can be modified with mouse.
selection
Digital and analog CANopen I/Os aredisplayed graphically on the I/O tree.No confusion possible during wiringoperation in the cabinet.
Graphic display of the I/Oterminals
19
I/O View
Logic View
Address View
Screen View
Set language according to the operator with just one click.
Text Table
It is easy to switch between languages for each
country. Create multi-language projects.
Unicode
It is possible to display and input multiple
languages by treating characters in different
languages as single character codes.
Movement inspection/document creation for efficient design.
Implement a quasi-environment connected to PLC
on your PC. Prevents mistakes by confirming
“Debug” before transfer.
Automatic Character Size Adjustment
Switching languages when multiple-languages are
used automatically adjusts character sizes according to
the size of the switches, lamps and message displays.
You can now output the list of used addresses as a
CSV file from the cross reference screen. You can
output not only all screens, but also individual screens.
Character size will be enlarged or reduced if the number of characters decreases or increases when switching languages.
View screens while editing, and use the mouse to control or confirm parts.
Simultaneously display and edit present address value of virtually connected devices. Link the screen view and logic view, for intuitive debug.
Verify address allocated at I/O terminal for additional external I/O.It is possible to switch input ON/OFF and update present values.
Used to debug logic program, it is possible to confirm that symbol parameters are ON/OFF and confirm the present value.
Japanese
It is possible to select and print out necessary items among configuration information from a project file created.English
In addition...
GP-Pro EX Simulation
Cross Reference CSV export
Screen creation Software
20
Instruction Notation List
○
○
▼▼
● /●
●
PLCsLadder Tool
Easy maintenance.
Pass-Through
USB Flash Memory Loader
Ladder Monitor / Device Monitor
Data logging for easy use.
Operation Log
Alarm Log
Historical Trend Graph
○
○
Easily send new data using USB memory without having to bring your laptop on site.
I only needmy USB !
Change label using CSVfiles without an editorIntegrate display even usingspecifications by differentmanufacturers.
Obtain operator's control log by part. Monitornecessary parts only for easy management
The CSV file can hold 10.000 entriesCreate a new file when full
Simultaneously obtain PLC alarm message anddevice value to quickly discover the cause
Easily debug ladder and data using the display.Open the board to easily connect a PC to the PLC.
You can debug evenif the control panel isfar away
Using the optionalUSB front cableenables you to debugwithout opening thecover of the panel.
Save data in CSV format forsmooth analysis on PC. It ispossible to log a message up to 8words when the alarm goes off.
USB transfer cable
orEthernet cable
It is possible to monitor a PLC ladder or deviceusing a display on site. Readily check PLC statusat time of occurence of trouble
Ladder Monitor
DeviceMonitor
GP3000For
Inch models :7.5 / 10.4 / 12.1 / 15
GP3000 AST3000For
Chronologically display graph for CF card andASB memory. Easily analyse log of abnormaloccurences.
Historical trend graph
display ON/OFF
Turn the display ON/OFF fornecessary graphs online (channel).It is also possible to displayauxiliary lines (upper limit,reference point, lower limit)
XY GraphIt is possible to displaypoints/lines of the word addressvalues, such as weight andpressure, to X/Y coordinates.
Log saved
21
Instruction Notation List
You can check the situation of the site on PCs outside the site, as you can view/operate the same screens as those at the site through the Ethernet.
Save your time. Direcly import all the symbol/variable declared in the Siemens Step 7 development tool. Noneed to input again the adresses in your project.
Screen editor for panel computer.Compatible with GP screen data.Multi-driver supported with varioushost controller.
Runtime PC, 3000 variables / pageAll protocols available (Unitelway, Modbus series and TCP, MPI, PPI,...)Routines import / export of variables ---> soft Windows - VB, VC, Dot.net
Runtime engine for IPCand PC/AT
Modem Modem
GP Viewer EXRemote monitoringsoftware
○
WinGP
WinGP for your PC !
GP-Pro EX allows sharing of drawingresources between GP and IPC.
The screen of GP Pro EX is displayed on theWindows screen.
Security function each user.
Configure authority parameters by setting certified ID or password for each part to be controlled using different security levels.
S7 symbol/variable import tool Change Passwords Online
Reduce work using combined solutions!
No PC on site
WinGPRuntime PC
GP-Pro EX for panel computerRuntime Engine.
Remote monitoring and control.
Screen creation Software
Easily change passwordswithout shutting down thesystem
It is possible to change passwords online.Passwords may also be changed or added usinga CSV file in CF/USB memory.
Change passwords and labels, or transfer screens and collect logs using only a USB memory.
Edito
r-less
Change passwords
Change nameplates
Collect logs
Set recipes
Downloadprojects
Collecting Data
Verify status
Factory
Remote Factory
Office
Ethernet
Lock screen operation with
exclusive access control
Set screen operation so that itcan not be performed on any display (or PC) except the onebeing used to avoid mistakesby another operator when using multiple displays or whenconnected to a PC.
Currentlyunderremoteaccess
Currentlyunderremoteaccess
Currentlyunder
remoteaccess
22
Remote solutions withoutprogram required.
(
●
●
●
●
●
●
● ●
Collect work records on computer connected to theEthernet. Operating instructions, such as recipes, can be sent from a computer to GP.
Works together with third partyproduction report software
MES action also supported
Data managementsoftware Pro-Server EX
Only with Ethernet I/F machine )
(WinGP required)
◎
OS
◎
OS
Other
◎
OS
CPU
Display Resolution
Memory
Hard Disk Space
◎
OS
Memory
◎
OS
CPU
Resolution
Memory
Hard Disk Space
Language Software Menu
Other Software
Printer
Network Adapter
◎
OS
Hard Disk Space
FTP Server
◎
OS
Supported Browser
Screen Resolution
◎
OS
◎
OS
CPU
OS
Resolution
Memory
Hard Disk Space
Software Menu
Languages that Hardware can Display
English/Japanese(Other languages are scheduled to be supported. For more details, visit the "Otasuke web site”)
For languages other than English/Japanese, FEPs and fonts for these languages should be added.
Language
■List of available software
CPU
Memory
Hard Disk Space
◎
?
※
OS
?
GP-Pro EX Ver.2.60 (EX-ED-V26)
GP-Viewer EX (EX-VIEWER-LICENSE)
WinGP for IPC (EX-WINGP-IPC)
WinGP for PC/AT (EX-WINGP-PCAT)
RPA (Remote PC Access) (EX-RPA)
Pro-Server EX Ver.1.2 (EX-SDV-V12)
Transfer tool
Pass-Through
Web Server
GP Remote Printer Server
Windows 2000 (service Pack 3 or later), Windows XP (Home Edition, Professional),Windows Vista (Ultimate, Home Premium, Home Basic, Business), Windows® 7 32-bit (Ultimate, Enterprise, Professional, Home Premium, Home Basic, Starter)
Pentium III 800MHz or greater (Pentium 4 1.3GHz or greater recommended)
Windows 2000 (Service PACK 3), Windows XP (service pack 2),Windows Vista (Ultimate, Home Premium, Home Basic, Business, Enterprise)Windows Server 2003 (Service Pack 2)
SVGA 800X600 or better (256 colors or greater required)
512MB or greater (1 GB or greater recommended)
400MB or greater Free space necessary for installation
English/Japanese/Korean/Chinese (simplified/Traditional)/Taiwanese/Cyrillic/Thai
Windows 98 (Second edition or later), Windows Me.Windows 2000 (Service Pack 3 or later), Windows XP (Home Edition, Pro)/Windows Vista (Ultimate, Home Premium, Home Basic, Business). For the installation of this product, administrator rights are required.
Pentium II 266MHz or greater recommended.
Windows 2000 Professional (service Pack 3 or later)Windows XP Professional, Windows XP embedded.
Windows 2000 (service Pack 3 or later), Windows XP (Home edition, Pro.)Windows Vista (Ultimate, Home Premium, Home Basic, Business, Enterprise) 32 bit
Pentium M 1GHz or greater recommended
Visit http:ultravnc.sourceforge.net
GP-Pro EX (Ver.2.0 or later), RPA keycode (EX-RPA (sold separately)), Ultra-VNCVer .1.0.2 should be installed on the PCs on the server, LAN cable, HUB (commercially available). Connect one server to one GP.
SVGA 800X600 or better
512 MB or greater (1GB or greater recommended)
200 MB or greater
256MB or greater (512MB or greater recommended)
128 MB or greater (512 MB recommended)
Windows 2000 (Service Pack 3 or later), Windows XP (Service Pack 2),Windows Vista (Ultimate, Home Premium, Home Basic, Business, Enterprise)Windows Server 2003 (Service Pack 2)
Windows 2000 (Service Pack 3 or later), Windows XP (Home Edition, Professional),Windows Server 2003 For the installation of this product, administrator rights are required.
Pentium III 500MHz or greater (Pentium III 800MHz or greater recommended)
SVGA 800X600 or greater (256 colors or greater required), only 96dpi font
128 MB or greater (256 MB or greater recommended)
1GB or greater (2GB or greater recommenced)
Windows 2000 (Service Pack 3 or later), Windows XP (Professional),Windows Server 2003
FTP server component included in IIS IIS Versions; Windows 2000:IIS5.0,Windows XP:IIS5.1, Windows Server 2003:IIS6.0
800KB or greater
A USB port or Ethernet port is required to transfer screens on a PC
60 MB or greater Free space necessary for installation
Windows 2000 Professional (Service Pack 4 or later), Windows XP (Service Pack 2 or later)
Microsoft Internet Explorer Ver. 6.0 or 7.0
XGA 1024X768 or greater
Free space necessary for installation
Free space necessary for installation
Network Configuration
English/Japanese
Microsoft Excel 2000 or later (for setting the action function)
Microsoft Internet Explorer Ver.5.0 or later (for setting the action function)
.NET Framework Ver.1.1
Any printer if it is supported by the OS
10BASE-T, 100BASE-TX
TCP/IP protocol (Configure from “Control Panel” in Windows)
Microsoft Access 2000 or later (for setting the action function)
▼●GP3000 LT3000For
PS3000 APL3000
Factory
Office
Ethernet
Collecting Data
Instructing tasks
Automatically deliver productioninstructions!Directly deliver instructions to the site for recipescreated at the office. Build an accurate and safesystem without any delivery mistakes.
Collect production data in real time!Automatically collect data, such as PLC data, in various formats, including Excel
Recipe
Datalogging
Recordcreation
Share information by creatingrecords with ExcelAcuurately create site documents such as dailyreports. Reduce programming work using templatesprepared ahead of time.
Over 29 standard templates which can be used immediatly
Productioncontrol template
Moment stop record graph
Directratefluctuation graph
Daily report, monthly reportTask planningAndonManage work processOversee actual performance
Connect directly to "EasyReport PRO" by Harmony Co., Ltd.
The MES action tool allows you to collect data using the analysisand reporting functions provided by SQL server.
2009.09 Digital Electronics Corporation. All Rights Reserved.Pro-face is a registered trademark of Digital Electronics Corporation in Japan, U.S.A., Canada, Europe and other areas and countries.
Caution: Before operating any of these products, be sure to read all related manuals thoroughly.
For printing purposes, the colours in this catalog may differ from those of the actual unit.Actual user screens may differ from the screens shown here.LCD screens may exhibit minute grid-points (light and dark) on the Display Panel surface. Also, "Contouring" - where some parts of the screen are brighter than others, producing a wavelike pattern - may occasionally occur. Both are normal for an LCD display and are not defects.All product names used in this catalog are the registered trademarks or trademarks of their respective companies.All information contained in this catalog is subject to change without notice.
Microsoft
Excel, Windows
, the Windows logo, Windows NT
, and/or other Microsoft productsreferenced here are either registered trademarks or trademarks of Microsoft Corporation in the U.S.and/or other countries.Intel
,
Pentium
, Celeron
and XScale
are either trademarks or registered trademarks of Intel Corporation or its subsidiaries in the U.S. and other countries.EdenTM is a trademark or registered trademark of VIA Technologies Inc.
Our Environmental Policy and Compliance with the RoHS DirectivePro-face has taken significant steps to meet increasingly stringent requirements for environmental preservation and has sought to comply with the RoHS Directive by adopting measures to eliminate specified harmful substances from existing products and products to be manufactured and sold beginning in 2006. For details, please refer to our web site or contact our sales office in your country.
Ro
Pro-face products and component parts bearing the CE Mark www.proface.eu and the UL or c-UL Listing and Recognized Component Marks
are your guarantees of compliance with safety standards accepted in countries and regions worldwide.
Product-Guide-2009-2010-eng
European Head Office The NetherlandsPro-face Europe B.V. Wegalaan 322132 JC HoofddorpTHE NETHERLANDS
Pro-face Europe B.V.(The Netherlands office) Wegalaan 322132 JC HoofddorpTHE NETHERLANDSTel: +31 (0)23 55 44 099 Tel: +31 23 55 44 094Fax: +31 (0)23 55 44 090 Fax: +31 (0)23 55 44 090 www.proface.eu
info@proface.eu
France
Belgium/Luxembourg
Pro-face France S.A.S.1, rue Henri Becquerel77290 Mitry-MoryFRANCE
Pro-face Europe B.V (Belgium office) Wegalaan 322132 JC HoofddorpTHE NETHERLANDSTel: +32 473 879 115Fax: +31 23 55 44 090www.proface.beinfo@proface.be
Tel: +33 (0)1 60 21 22 91
Fax: +33 (0)1 60 21 22 92
www.proface.fr
info@proface.fr
Germany
Denmark, Norway, Finland,Estonia, Latvia, Lithuania
Pro-face Deutschland GmbHAlbertus-Magnus-Straße 1142719 SolingenGERMANYTel: +49 (0)212 258 260Fax: +49 (0)212 258 2640www.pro-face.deinfo@pro-face.de
Pro-face Northern EuropeLedreborg Allé 118DK-4000 RoskildeDENMARKTel: +45 70 22 01 22Fax: +45 70 22 01 33 www.proface.dkinfo@proface.dk
Italy Pro-face Italia S.p.a.Via G. di Vittorio 26 20030 Bovisio Masciago (Milano)ITALYTel: +39 0362 59 96 1Fax: +39 0362 59 96 69www.proface.itinfo@proface.it
Poland Pro-face Europe B.V. (Poland Office)ul. Ostrobramska 10104-041 Warszawa,POLANDTel: +48 (22) 465-66-62Fax: +48 (22) 465-66-62www.proface.plinfo@proface.pl
AustriaPro-face Europe B.V. (Austria office)Softwarepark 35/2/14cA-4232 HagenbergAUSTRIATel: +43 7236 3343 -620Fax: +43 7236 3343 -629www.proface.atinfo@pro-face.at
RussiaPro-face Northern Europe (Russia Office)Pulkovskoe Shosse 30-4196158 Saint PetersburgRUSSIATel: +7 812 336 47 06Fax: 7 812 336 47 18www.pro-face.ruinfo@pro-face.ru
Spain and Portugal Pro-face España C/ Navarra 44E-08440 Cardedeu (Barcelona)SPAINTel: +34 93 846 07 45Fax: +34 93 845 48 68 www.pro-face.es info@proface.es
Sweden Pro-face Sweden ABProduktvägen 8BSE-246 21 Löddeköpinge(Malmö)SWEDENTel: +46 46 540 90 70Fax: +46 46 71 27 90 www.proface.seinfo@proface.se
Switzerland Pro-face Schweiz GmbHPumpwerkstr. 23, CH-8105 RegensdorfSWITZERLANDTel: +41 (0)43 343 7272Fax: +41 (0)43 343 7279www.proface.chinfo@proface.ch
UK & IrelandPro-face UK Ltd.11, The Cobalt CentreSiskin Parkway East, CV3 4PECoventryEnglandTel: +44 (0)2476 511288Fax: +44 (0)2476 511499 www.proface.co.ukinfo@proface.co.uk
www.proface.nlinfo@proface.nl
1 12
4
5
6
7 9
8 10
11
12
13
14
1516
3
America 1
4
5 5
55
5
7
8
3
6
915
1310
11
14
12
16
2
America
Korea
Taiwan
India
South-East Asia
Digital ElectronicsCorporation
China
Korea
Taiwan
Australia
India
South-East Asia
Digital ElectronicsCorporation
China
Global Head Office Digital Electronics Corporation8-2-52 Nankohigashi, Suminoe-KuOsaka 559-0031JAPANTel: +81 (0)6 6613 3116Fax: +81 (0)6 6613 5888www.pro-face.cominfo@pro-face.com
China South Korea Pro-face Korea Co., Ltd.4th floor, Cheil Bldg. 94-46Youngdeungpo-dong 7ga,Youngdeungpo-gu, Seoul 150-37SOUTH KOREA .Tel: +82 (0)2 2630 9850Fax: +82 (0)2 2630 9860www.proface.co.krproface@proface.co.kr
Taiwan Pro-face Taiwan Co., Ltd.3F, No.39, Ji-Hu Road, Nei-Hu Dist. Taipei 114 TAIWANTel: +886 (0)2 2657 112Fax: +886 (0)2 2657 1021 1www.proface.com.twproface@proface.com.tw
South-East Asia Pacific Pro-face South-East Asia Pacific Co., Ltd.13th Floor, Rungrojthanakul Building 44/1, Ratchadapisek Road Huaykwang Sub-District, Huaykwang District Bangkok 10310THAILANDTel: +66 (0)2 617 5678Fax: +66 (0)2 617 5688www.proface.co.thsupport@proface.co.th
Australia and New Zealand Pro-face Australia Pty Ltd87 Ricketts Road, Mt. Waverley,VIC 3149AUSTRALIATel: +61 (0)3 9550 7395Fax: +61 (0)3 9550 7390
pfau@pro-face.com
Pro-face America, Inc.(North/South American Head Office & Support Center)750 North Maple RoadSaline, Ml 48176-1292U.S.A.Tel: +1 734 429 4971Toll Free: +1-800-289-9266 (USA, CAN)Fa: +1 734 429 1010sales.info@profaceamerica.comwww.profaceamerica.com
IndiaPro-face India Bangalore HQ#88(P), 1 Floor "Sahasra Shree" EPIP Indl. Area White Field Road, Bangalore 560066INDIATel: +91 80 3066 7454 , +91 80 3066 7456Fax: +91 80 3066 7452sales.proface@proface.co.in
Pro-face China International Trading (Shanghai) Unit 1110, 550 Yanan Road East,Shanghai 200001P.R. CHINATel: +86 (0)21 6361 5175Fax: +86 (0)21 6361 5176www.proface.com.cnproface@proface.com.cn
www.pro-face.com.au/www.pro-face.co.nz
North/South American Head Office
Internationale Pro-face office
Pro-face head office
Pro-face sales office
Main distributor orsales representative