Catalogue Euro Service O E M Products

transcript

Euro Service A/SHøjmarken 18

DK - 5492 VissenbjergTel. + 45 63 13 07 07Fax + 45 63 13 08 08

SE-nr. DK20890290 E-mail es@euro-service.dk

Website www.euro-service.dk___________________________________________________________________

___________________________________________________________________

ES Machinery · Euro Label · Euro Shaft · Euro Cut · Euro Tape · Zero Static®

Converting made easy

for you

Euro Service OEM product index

Euro Shaft1. Air shafts2. Chucks3. Shafts adapters4. Mechanical chucks5. Bottom knife shafts6. Special shafts7. Mechanical expanding shafts8. Coreless shafts9. Cantilever shafts10. Shaft brakes11. Air differential shafts12. Mechanical differential shafts13. Spare parts for shafts14. Shafts repair

Core handling equipment1. Core cutter2. Paper core automatic loading/unloading

Trim collecting equipment1. Trim winder2. Trim cutter3. Side cutters 4. Matrix removal5. Venturi & pneumatically conveying of trim waste6. Trim guide rolls

Euro Cut cutting tools & slitting systems1. Slitting blades2. Slitting systems1. Slitting knife holders3. Slit-seal units4. Side cutters 5. Extrusion and film cutters, knives & blades6. Slitting hardened rolls

Perforation 1. Micro perforation2. Needle rolls3. Macro perforation 4. Perforating wheels5. Cross web perforation attachment & blades

Winding, rewinding & un-winding1. Unwinding units2. Winders3. Trim winder

Euro Service OEM product index

Conveyors1. Conveyors

Idler rolls & nip rolls1. Nip roll assembly2. Idler roll aluminum3. Idler roll carbon fiber4. Idler roll carbon fiber with rubber

Anti-wrinkle rolls1. Brush rolls2. Scroll roll grooved3. Web spreader assemblies4. Oscillator rolls

Euro Label 250 label applicator1. EL-250 M Mobile2. EL-250 C Conveyor3. EL-250 W Winder

Euro Stack-Lifter1. Euro Stack-Lifter

ES Machinery1. ES Machinery

AA SERIES

KEy fEAtuRES• Stronganddurableconstructiondesignedforindustrialuse• Lightweightduetothealuminiumbodydesign• Easytohandleandfastchangeoverforincreasingproductivity• Excellenttorquecapability• Easyandquickin-housemaintenance• Wellbalancedbodyforhighspeedapplications• Endjournalsmanufacturedaccordingtocustomersizes andspecifications• Anodizingbodyasstandardandcorrosionresistant treatmentoftheendjournals• Heavydutyanodizedaluminiumexpandingelements• Longitudinalglidingstripesforquickrollremoval• Aluminiumexpandingelementsdesignedforhigh grippingpower,withoutdamagingthecorewall

EuroShaft

OptIOnS:• Hardenedendjournals• Side,endordualvalvepossibility• Rotaryunionforremoteairsupply• Flangemountorcantileveredmounting

MODEL AA74 AA142 AA150

Expandingshaftdiameter(mm): 74 142 150Maxexpansiondiameter(mm): 84.5 149.5 160Min/maxbodywidth(mm): 100–3000mm 100–3000mm 100–3000mmBodymaterial: Heavydutyaluminium Heavydutyaluminium HeavydutyaluminiumInsidecorediameter: (3”)76.2mm-2/+4 142mm-1/+2 (6”)152.4mm-2/+4Numberofexpansionelements: 6 8 9Typeofexpansionelements: Heavydutyaluminium Heavydutyaluminium HeavydutyaluminiumAveragebodyweightwithoutjournals(kg/m):(1)Averageweightfor2standardjournals(kg):Transmissiontorque(N.m):(2) 600 1300 1620Max.workingairpressure(bar): 6 6 6

Note: 1:Includingexpandingelements. 2:Theindicatedvaluesaredependingof:Airpressure,coretype,shaftlength,journalsdesignandtypeofwinding/unwinding. Theindicatedvaluesareforpapercorewith12mmwallthickness,6barsairpressureand1mlongshaftbody.

Remarks: Specificationssubjectchangewithoutpreviousnotice. Othersizesanddimensionscanbemadeaccordingtocustomerspecifications.

Airexpandingshaftswithaluminiumexpansionelementsthatsecurerollsfirmlyandeliminatecoreslip.Forgeneralpurposewinding and unwinding uses. Ideal for medicinal, food andchemical processing plants or plants where shafts might besubjecttohumidconditions.

MAIn tEchnIcAl SpEcIfIcAtIOnS

EuroServiceA/S • Højmarken18 • DK-5492 Vissenbjerg • Tel.+4563130707 • Fax+4563130808 • E-mail:es@euro-service.dk www.expanding-shafts.dk

3 9.7 10.4

AC SERIES

KEy fEAtuRES• Selfcentringwithultimatecoreconcentricity• Wellbalancedbodyforhighspeedapplications• Stronganddurableconstructiondesigned forindustrialuse• Lightweightduetothealuminium bodydesign• Easytohandleandfastchangeoverfor increasedproductivity• Excellenttorquecapability• Easyandquickin-housemaintenance• Endjournalsmanufacturedaccordingto customersizesandspecifications• Anodizingbodyasstandardandcorrosion resistanttreatmentoftheendjournals• Longitudinalglidingstripesforquickroll removal

EuroShaft

OptIOnS:• Hardenedendjournals• Side,endordualvalvepossibility• Rotaryunionforremoteairsupply• Flangemountorcantileveredmounting• Aluminiumorrubberexpansionelements, accordingtocustomerpreference

MODEL AC74 AC142 AC150

Expandingshaftdiameter(mm): 74 142 150 Maxexpansiondiameter(mm): 80.5 149.5 156.5Min/maxbodywidth(mm): 100–3000mm 100–3000mm 100–3000mmBodymaterial: Heavydutyaluminium Heavydutyaluminium HeavydutyaluminiumInsidecorediameter: (3”)76.2mm-2/+2 142mm-1/+2 (6”)152.4mm-2/+2Numberofexpansionelements: 6 8 9Typeofexpansionelements: 3rubber+3aluminium 4rubber+3aluminium 3rubber+3aluminiumAveragebodyweightwithoutjournals(kg/m):(1)Averageweightfor2standardjournals(kg):Transmissiontorque(N.m):(2) 500 1200 1500Max.workingairpressure(bar): 6 6 6

Note: 1:Includingexpandingelements. 2:Theindicatedvaluesaredependingof:Airpressure,coretype,shaftlength,journaldesignandtypeofwinding/unwinding. Theindicatedvaluesareforpapercoreswith12mmwallthickness,6barsairpressureand1mlongshaftbody.

Self centring air expanding shafts for improved coreconcentricity. Suitable for high speed applications or generalwinding and unwinding applications with need for wellbalancedandcentredrolls.Idealforcentredrivenunwinders.

MAINTEcHNIcALSpEcIFIcATIONS

8 18 16

3 9.7 10.4

RA SERIES

KEy fEAtuRES• Stronganddurableconstructiondesignedforindustrialuse• Lightweightduetothealuminiumbodydesign• Easytohandleandfastchangeoverforincreasingproductivity• Excellenttorquecapability• Easyandquickin-housemaintenance• Wellbalancedbodyforhighspeedapplications• Endjournalsmanufacturedaccordingtocustomersizesandspecifications• Anodizingbodyasstandardandcorrosionresistant treatmentoftheendjournals• Heavydutyrubberandaluminium elements• Positiveretractionforquick rollremoval• Rubbersegmentedand aluminiumexpandingelements forhighgrippingpower

EuroShaft

MODEL RR74 RR142 RR150Expandingshaftdiameter(mm): 74 142 150Maxexpansiondiameter(mm): 80.5 149.5 156.5Min/maxbodywidth(mm): 100–3000mm 100–3000mm 100–3000mmBodymaterial: Heavydutyaluminium Heavydutyaluminium HeavydutyaluminiumInsidecorediameter: (3”)76.2mm-2/+4 142mm-1/+2 (6”)152.4mm-2/+4Numberofexpansionelements: 6 8 9Typeofexpansionelements: 3rubber+3aluminium 4rubber+3aluminium 6rubber+3aluminiumAveragebodyweightwithoutjournals(kg/m):Averageweightfor2standardjournals(kg):Transmissiontorque(N.m):(2) 600 1300 1620Max.workingairpressure(bar): 6 6 6

note: 1:Includingexpandingelements. 2:Theindicatedvaluesaredependingof:Airpressure,coretype,shaftlength,journalsdesignandtypeofwinding/unwinding. Theindicatedvaluesareforpapercoreswith12mmwallthickness,6barsairpressureand1mlongshaftbody.

Air expanding shafts with rubber and aluminium expansionelementsformulticoretypeslikeplastic,fibreorsteel.Generalpurpose winding and unwinding uses, with high torquefeatures.

MAIn tEchnIcAl SpEcIfIcAtIOnS

8 18 16

3 9,7 10,4

RR SERIES

KEy fEatuRES• Stronganddurableconstructiondesignedforindustrialuse• Lightweightduetothealuminiumbodydesign• Easytohandleandfastchangeoverforincreasingproductivity• Excellenttorquecapability• Easyandquickin-housemaintenance• Wellbalancedbodyforhighspeedapplications• Endjournalsmanufacturedaccordingtocustomersizes andspecifications• Anodizingbodyasstandardandcorrosionresistant treatmentoftheendjournals• Heavydutyrubberelements• Positiveretractionforquickrollremoval• Rubbersegmentedexpandingelementsfor highgrippingpower

EuroShaft

MODEL RR74 RR142 RR150

Expandingshaftdiameter(mm): 74 142 150Maxexpansiondiameter(mm): 80.5 149.5 156.5Min/maxbodywidth(mm): 100–3000mm 100–3000mm 100–3000mmBodymaterial: Heavydutyaluminium Heavydutyaluminium HeavydutyaluminiumInsidecorediameter: (3”)76.2mm-2/+4 142mm-1/+2 (6”)152.4mm-2/+4Numberofexpansionelements: 6 8 9Typeofexpansionelements: Heavydutyrubber Heavydutyrubber HeavydutyrubberAveragebodyweightwithoutjournals(kg/m):(1)Averageweightfor2standardjournals(kg):Transmissiontorque(N.m):(2) 700 1400 1700Max.workingairpressure(bar): 6 6 6

Note: 1:Includingexpandingelements. 2:Theindicatedvaluesaredependingof:Airpressure,coretype,shaftlength,journalsdesignandtypeofwinding/unwinding. Theindicatedvaluesareforpapercoreswith12mmwallthickness,6barsairpressureand1mlongshaftbody.

Airexpandingshaftswithrubberexpansionelements.Generalpurpose winding and unwinding uses with high torquefeatures.

MaIn tEchnIcal SpEcIfIcatIOnS

7 18 16

3 9,7 10,4

AIR EXPANDING ADAPTERS

KEy fEATuRES• Stronganddurableconstructiondesignedfor industrialuse• Easytohandleandfastchangeoverfor increasingproductivity• Hightorquecapability• Easyandquickin-housemaintenance• Longitudinalglidingstripesforquickrollremoval• Expandingelementsdesignedforhighgripping powerwithoutdamagingthecorewall

EuroShaft

OPTIONS:• Sideorendvalvepossibility• Quickairconnectorformountingin parallelwithotheradaptors• Aluminiumorrubberexpandingelements• Standardorselfcentringexpanding elementsaccordingtocustomerpreference• Availablewithfixedcorestopsallowing precisepositionofreels

MODEL AEA74 AEA142 AEA150

Expandingadaptordiameter(mm): 74 142 150 Maxexpansiondiameter(mm): 84.5 149.5 160Bodymaterial: Heavydutyaluminium Heavydutyaluminium HeavydutyaluminiumMaxborediameter(mm) 30mm 100mm 100mmInsidecorediameter: (3”)76.2mm-2/+4 142mm-1/+2 (6”)152.4mm-2/+4Numberofexpansionelements: 6 8 9Workingairpressure(bar): 8 18 16

An economical solution for winding and unwinding largerdiametercores.Suitableforretrofittingotherexistingairshaftsorsolidbars.Quicksizeshaftadaptorfrom3”to6”.

MAIN TEchNIcAl SPEcIfIcATIONS

AIR EXPANDING CHUCKS

KEy fEAtURES• Stronganddurableconstructiondesignedfor industrialuse• Easytohandleandfastchangeoverfor increasingproductivity• Excellenttorquecapability• Easyandquickin-housemaintenance• Longitudinalglidingstripesforquickrollremoval• Expandingelementsdesignedforhighgripping powerwithoutdamagingthecorewall

EuroShaft

OPtIONS:• Sideorendvalvepossibility• Rotaryunionforremoteairsupply• Flangemountorcantileveredmounting• Aluminiumorrubberexpandingelements• Standardorselfcentringexpanding elementsaccordingtocustomerpreference

MODEL AEC74 AEC142 AEC150

Expandingchuckdiameter(mm): 74 142 150Maxexpansiondiameter(mm): 84,5 149,5 160Bodymaterial: Heavydutyaluminium Heavydutyaluminium HeavydutyaluminiumInsidecorediameter: (3”)76.2mm-2/+4 142mm-1/+2 (6”)152.4mm-2/+4Numberofexpansionelements: 6 8 9AveragebodyweightwithoutJournalswithexpandingelements(kg/m):Max.workingairpressure(bar): 6 6 6

An economical solution for winding and unwinding largerdiameter cores. For general purpose applications in windingandunwinding.

MAIN tECHNICAl SPECIfICAtIONS

EuroServiceA/S • Højmarken18 • DK-5492 Vissenbjerg • Tel.+4563130707 • Fax+4563130808 • E-mail:es@euro-service.dkwww.expanding-shafts.dk

8 18 16

Converting made easy for you

___________________________________________________________________

Spare parts and accessories for expanding shafts

Item no. Description

9009PA0003 Midget valve 1/8" GAS-NPT, brass

9008PA0002 Nipple valve, brass, for air hose

9002PA0001Rubber hose, width 15.5 mm

9002PA0002Rubber hose, width 19.5 mm

9003PA0001Protection strip, width 15.7 mm

9003PA0002 Protection strip, width 19.7 mm

9001PA0001Clamp, top, width 15.5 mm

9001PA0004Clamp, top, width 19.5 mm

9001PA0005 Clamp, bottom, width 15.5 mm

9001PA0007Clamp, bottom, width 19.5 mm

9005PA0001Flat spring, width 16 mm -0.50/+0.00

9005PA0002Flat spring, width 20 mm -0.50/+0.00

9004PA0011 Continuous rubber lug, width 15x0.6 H 9.2

9004PA0012Continuous rubber lug, width 20x0.6 H 8.3

9012PA0001Inflator gun, metal, 1/4" NPT, w/ rubber stud, 2.5 m polyurethane hose, without manometer

9012PA0002 Inflator gun, metal, 1/4" NPT, w/ rubber stud, without manometer

Rotating unions Ask for more information

Euro Service provides original spare parts and accessories to support the performance and life span of all our products. Spare parts are usually delivered ex stock.

Euro Service A/S Højmarken 18

DK - 5492 Vissenbjerg Tel. + 45 63 13 07 07 Fax + 45 63 13 08 08 SE-nr. DK20890290

E-mail es@euro-service.dk Website www.euro-service.dk

___________________________________________________________________

Euro Shaft

QUOTATION SHEET FOR EURO SHAFT EXPANDING SHAFTS

Airshaft outer diameter:

Core inner diameter:

Core outer diameter:

Core material:

Max roll width:

Roll type: Solid: Centre slit: Multi slit:

Max roll weight:

Min roll width:

Min roll weight at min roll width:

Unwind or rewind:

Line speed:

Max RPM:

Type of machine:

Type of material:

Web tension N/m:

End journals treated: Yes: No:

Please specify end journals:

Please specify shaft support:

Company: Contact person:

Phone: Fax:

E-mail: Date:

Signature:

___________________________________________________________________

AIR DIFFERENTIAL SHAFT

Air differential shafts slip internally to accommodate multiple width rolls on one shaft. Always

custom made, the shafts expand for a precision fit and are available in several designs and

mounting styles. You can run multiple rolls on one run and still get the tension equalization

that you need for a good quality output. Bottom line is, you can increase your productivity by

running varying roll sizes at one time.

The easiest way to try your success with a differential shaft is to use the most affordable air

roll differential shaft, which is designed for duplex centre or surface winders, whether they

have variable speed control or not. It is quick and easy to set up, is easy on the cores and

won’t let you down when you need multiple roll tension equalization.

Euro Service A/S reserves the right to modify or change the design without prior notice.

___________________________________________________________________

MECHANICAL DIFFERENTIAL SHAFT

Rotating material of sleeve bore core and frictional material for two sides all adopt Bakelite.

The frictional strength is subject to either spring pressure or cylinder power to decide each

torque assembly of slippage, for easy to control the tension adjustment in each material.

Euro Service A/S reserves the right to modify or change the design without prior notice.

Paper core loader

ES Trim Nip

ApplicATioN ArEASTrim and stripe removing of pE, pp, pET, pVc, adhesive tapes, rubber, ladder, textile, glass fiber fabrics, etc.

KEy fEATurES• Easytooperate• Lowpowerconsumption• Quickandeasytriminsertion• Easytoinstall–“Plug&Play”• Strongindustrialbuildunit• Adjustabletrimtension• Adjustabletriminputdirection• Oneunitcanhandledifferenttrimmaterialsandwidths

TrimCollectingSystems

opTioNS:•Speedinputfromexternunitssuchasextruderswinders,slittingmachines,bagmakingmachines, etc, can be delivered as an option• SpecialTrimNipscanbemade,accordingto customer applications

TheESTrimNIPisasetofpullingrollersthatpositivelyremovetrimandscrapmaterialfromaslittingmachine,winder,shearknifeorothercuttingdevice.TheESTrimNIPisaflexible&versatileunitcapableofpullingdifferentsizesandtypesoftrimorscrapmaterial.Anaffordableandeconomicalsolutionthatcanbeusedinmanytrimcollectionapplications.

MAiN TEchNicAl SpEcificATioNS

Euro Service A/S • Højmarken18 • DK-5492 Vissenbjerg • Tel.+4563130707 • Fax+4563130808 • E-mail:es@euro-service.dk www.es-machinery.dk

Model ES TN 1 ES TN 2 ES TN 3Trim thickness (microns): 8 - 600 8 - 600 8 - 600

Trim width (mm): 3 – 100 3 – 100 3 – 100

Speed (m/min): 10 – 300 15 - 350 10 – 350

Trim tension adjustment: Mechanical Mechanical & analog - by potentiometer

Mechanical & digital

Drive – main roll: AC MotorTo be integrated into the existing equipment

AC freq. inverter mounted on a extern cabinet

AC motor with integratedAC freq. inverter

Electrical supply: 230 V AC; 2A 230 V AC; 2A 230 V AC; 2A

Note:Specificationsanddimensionsaresubjecttochangewithoutnotice.

co Convertingmadeeasyforyou

Accessories Guide roll 74mm w Guide roll 99mm w

ES Trim Winder

ApplicATion ArEASTrim and stripe winding of pE, pp, pET, pVc, adhesive tapes, rubber, ladder, textile, glass fiber fabrics, etc.

KEy fEATurES• Portable• Easytooperate• Lowpowerconsumption• Quickandeasyrollremoval• Easytoinstall–“Plug&Play”• Strongindustrialbuildmachine• Adjustablespeedandtrimtension• Oneunitcanhandledifferenttrimmaterialsand widths

opTionS:• Motorcontrolledtraversemechanism• Otherexpandingshaftsdiametersavailable• Othertypeofexpandingshaftscanbedelivered on demand• Othertypeoftransversemechanisms• Speedinputfromexternunitssuchasextruderswinders,slittingmachines,bagmakingmachines, etc, can be delivered as option• Specialwinderscanbemade,accordingto customer applications

TheESTrimWinderisaflexible&versatileunitcapableofwindingmanysizesandtypesoftrimmaterial.Completed rolls of trimmaterial can be quickly removed fromthewinder.Trimmaterial is homogeneouslywinded on a highquality expanding shaft that can be used for core or core-lessapplications.

MAinTEChniCALSPECifiCATiOnS

Euro Service A/S • højmarken18 • DK-5492 Vissenbjerg • Tel.+4563130707 • fax+4563130808 • E-mail:es@euro-service.dk www.es-machinery.dk

Model ES TW 1 ES TW 2 ES TW 1SPNb. of winding shafts 1 2 1

Trim thickness (microns): 8 - 500 8 - 500 8 - 500

Trim width (mm): 3 – 100 3 – 100 3 – 100

Speed (m/min): 10 – 200 15 - 150 10 – 300

Max. trim rolls width (mm): 500 500 500

Max. trim rolls diameter(mm): 480 480 480

Expanding shaft diameter for core winding (mm): 74/79 74/79 74/79

Expanding shaft diameter for core winding (mm): 84 /100 84 /100 84 /100

Drive – main shaft: AC vector F. Inverter AC vector F. Inverter AC vector F. Inverter

Drive – transverse mechanism: Pneumatic Pneumatic Motor driven

Air supply (bar): 6 6 6

Dimensions (mm): W: 700L: 1060H: 720

W: 700L: 1060H: 1230

W: 700L: 1060H: 720

note:Specificationsanddimensionsaresubjecttochangewithoutnotice.

coConvertingmadeeasyforyou

INTEGRATED SOLUTIONS FOR WEB TRIM RECYCLING

TRIM GRANULATORS

RECLAIMED TRIM DOSING

TRIM CUTTING AND PULLING

EURO-SERVICE A/SHøjmarken 18

DK-5492 Vissenbjerg

www.euro-service.dk

___________________________________________________________________

ES Film Side Cutter

___________________________________________________________________

ES Film Side Cutter

___________________________________________________________________

ES Slitter Rewinder

With expanding shafts, multigroove rings & bottom knife shaft

___________________________________________________________________

Euro Micro PerforatorCold Perforation or Hot Perforation

Microperforation unit

DK - 5492 Vissenbjerg Tel. + 45 63 13 07 07 Fax + 45 63 13 08 08

Website www.euro-service.dk

___________________________________________________________________

Micro perforation unit manufactured by Euro Service

___________________________________________________________________

Please ask for more information.

___________________________________________________________________

Macro perforation unit manufactured by Euro Service

Please ask for more information.

Macroperforation unit

Longitudinal perforation

ES Trim Winder

ApplicATion ArEASTrim and stripe winding of pE, pp, pET, pVc, adhesive tapes, rubber, ladder, textile, glass fiber fabrics, etc.

KEy fEATurES• Portable• Easytooperate• Lowpowerconsumption• Quickandeasyrollremoval• Easytoinstall–“Plug&Play”• Strongindustrialbuildmachine• Adjustablespeedandtrimtension• Oneunitcanhandledifferenttrimmaterialsand widths

opTionS:• Motorcontrolledtraversemechanism• Otherexpandingshaftsdiametersavailable• Othertypeofexpandingshaftscanbedelivered on demand• Othertypeoftransversemechanisms• Speedinputfromexternunitssuchasextruderswinders,slittingmachines,bagmakingmachines, etc, can be delivered as option• Specialwinderscanbemade,accordingto customer applications

TheESTrimWinderisaflexible&versatileunitcapableofwindingmanysizesandtypesoftrimmaterial.Completed rolls of trimmaterial can be quickly removed fromthewinder.Trimmaterial is homogeneouslywinded on a highquality expanding shaft that can be used for core or core-lessapplications.

MAinTEChniCALSPECifiCATiOnS

Euro Service A/S • højmarken18 • DK-5492 Vissenbjerg • Tel.+4563130707 • fax+4563130808 • E-mail:es@euro-service.dk www.es-machinery.dk

Model ES TW 1 ES TW 2 ES TW 1SPNb. of winding shafts 1 2 1

Trim thickness (microns): 8 - 500 8 - 500 8 - 500

Trim width (mm): 3 – 100 3 – 100 3 – 100

Speed (m/min): 10 – 200 15 - 150 10 – 300

Max. trim rolls width (mm): 500 500 500

Max. trim rolls diameter(mm): 480 480 480

Expanding shaft diameter for core winding (mm): 74/79 74/79 74/79

Expanding shaft diameter for core winding (mm): 84 /100 84 /100 84 /100

Drive – main shaft: AC vector F. Inverter AC vector F. Inverter AC vector F. Inverter

Drive – transverse mechanism: Pneumatic Pneumatic Motor driven

Air supply (bar): 6 6 6

Dimensions (mm): W: 700L: 1060H: 720

W: 700L: 1060H: 1230

W: 700L: 1060H: 720

note:Specificationsanddimensionsaresubjecttochangewithoutnotice.

coConvertingmadeeasyforyou

___________________________________________________________________

Euro Rewinder “Doctor type 1”

Use: Wind to customer roll from mother roll.Assembly of two rolls.Edge trim.

Specifications: 1 Unwinder with web tension1 Web guide1 Winder with web tension2 Edge trim knives1 Assembly tableWidth: 600mmSpeed: 300m/min

Options: Edge Trim Evacuation

Budget price: EUR 34.000

Use: Wind to customer roll from mother roll by slitting in up to 5 rollsEdge trim.

Specifications: 1 Unwinder with web tension1 Web guide1 Winder with web tension4 Slitting knives1 differential shaft with 10 segments.1 spreader idle rollerWidth: 550mmSpeed: 300m/min

Options: Edge Trim EvacuationAssembly of two rolls.

Use: Wind to customer roll from mother roll by slitting in up to 19 rollsEdge trim.

Specifications: 1 Unwinder with web tension1 Web guide1 Winder with web tension4 Slitting knives2 differential shafts with 10 segments.Width: 550mmSpeed: 300m/min

Options: Edge Trim EvacuationAssembly of two rolls.

ES winder

ES unwinder

ES Slitter rewinder

Packmachine and conveyors

ES Trim Nip

ApplicATioN ArEASTrim and stripe removing of pE, pp, pET, pVc, adhesive tapes, rubber, ladder, textile, glass fiber fabrics, etc.

KEy fEATurES• Easytooperate• Lowpowerconsumption• Quickandeasytriminsertion• Easytoinstall–“Plug&Play”• Strongindustrialbuildunit• Adjustabletrimtension• Adjustabletriminputdirection• Oneunitcanhandledifferenttrimmaterialsandwidths

opTioNS:•Speedinputfromexternunitssuchasextruderswinders,slittingmachines,bagmakingmachines, etc, can be delivered as an option• SpecialTrimNipscanbemade,accordingto customer applications

TheESTrimNIPisasetofpullingrollersthatpositivelyremovetrimandscrapmaterialfromaslittingmachine,winder,shearknifeorothercuttingdevice.TheESTrimNIPisaflexible&versatileunitcapableofpullingdifferentsizesandtypesoftrimorscrapmaterial.Anaffordableandeconomicalsolutionthatcanbeusedinmanytrimcollectionapplications.

MAiN TEchNicAl SpEcificATioNS

Euro Service A/S • Højmarken18 • DK-5492 Vissenbjerg • Tel.+4563130707 • Fax+4563130808 • E-mail:es@euro-service.dk www.es-machinery.dk

Model ES TN 1 ES TN 2 ES TN 3Trim thickness (microns): 8 - 600 8 - 600 8 - 600

Trim width (mm): 3 – 100 3 – 100 3 – 100

Speed (m/min): 10 – 300 15 - 350 10 – 350

Trim tension adjustment: Mechanical Mechanical & analog - by potentiometer

Mechanical & digital

Drive – main roll: AC MotorTo be integrated into the existing equipment

AC freq. inverter mounted on a extern cabinet

AC motor with integratedAC freq. inverter

Note:Specificationsanddimensionsaresubjecttochangewithoutnotice.

co Convertingmadeeasyforyou

Accessories Guide roll 74mm w Guide roll 99mm w

Idler rolls

___________________________________________________________________

Euro Stack-Lifter®

The Operator friendly

Stack-Lifter®

√ Easy to install

√ Easy to operate

√ Economical – money saver

√ Efficient – correct operation every time

√ Exclusive features that makes the operator job easier

√ Safe

√ Service free

√ Speeds production up

√ Strong build – build to last !

√ State of the art, with unique features that makes the operator job easier

___________________________________________________________________

▪ Adjustable in heights and widths

▪ Works with most types of stacking pins

availale in the market

▪ Can lift up to 35 kg of stacked bags

▪ Adjustabble to bag sizes from 100 to

1000 mm

▪ Quick job change (takes less than 1

min. to adjust the Stack-Lifter® to a

new bag size)

▪ Safe operation – the Stack-Lifter® is

delivered with a finger/hand

protection device

Step 1

Step 2 Step 2 – view 2

Step 1 – view 1

___________________________________________________________________

Advantages

For the manufacturer : Long lasting equipment

Money saver : Speeds up the operation process Easy to start

Can be installed in any existing wicket machine (like Hudson-Sharp/FMC/LEMO/Scae/Amplast, etc.)

Low price Less days lost through sickness of the operators due to better ergonomc

handling

For the operator : Eliminates arm and wrist stress/pains Better ergonomic work

Less sick days due to elimination of arm/wrist pains or back pains Better working health

More free time between stacking of bags

Very easy to operate Safe operation

Technical specifications

Model STL-PN

Operator activated STL-Auto

Conveyor model

Activated by Operator activated, pneumatic switch Automatically activated by photocell signal and PLC pulse

Control system Pneumatic PLC

Air pressure 6 bar 6 bar

Voltage 24V DC 24V DC

Standard CE CE

Price EUR EUR Note : Specifications and prices are for standard machines and are subject to change without notice

ES Machinery

Produktion af maskiner, komponenter og dele

kvalitetsbevidst ordreproducerende maskinfabrik

Euro Service A/S • Højmarken 18 • DK-5492 Vissenbjerg • Tel. +45 63130707 • Fax +45 63130808 • E-mail: es@euro-service.dk www.euro-service.dk

Om Euro Service A/S

Vi er en moderne virksomhed med et team af veluddannede medarbejdere med mange års erfaring. Vores viden og ekspertise i maskindesign gør os i stand til at lave optimale konstruktioner og design, der giver en effektiv og perfekt løsning, tilpasset kundens specifikke krav. Vi kan lave mange forskellige emner til vores kunder i alle typer materialer, der er egnet for bearbejdning.

Hvad kan vi tilbyde?

Bearbejdningsopgaver• CNC drejning • CNC fræsning• Afkortning• Konventionel drejning og fræsning• Specialopgaver• Underleverandør indenfor serieproduktion og prototyper

Produktion af specialmaskiner og maskindele• Prototype fremstilling• Produkt optimering• Optegning og optimering af egne opfindelser

Konstruktion og design• SolidWorks 3D/2D tegninger og konstruktion• CAD/CAM • Produkt og montagevejleding

Hvordan er vi anderledes?

Vi lægger vægt på godt håndværk, kvalitet, troværdighed og højt serviceniveau. Det betyder, at vi altid leverer til aftalt tid og på aftalt sted. Den perfekte løsning skal rumme både sund fornuft og kreativitet. Dette kombineret med vores fleksibilitet og evne til at finde nye veje, gør at vi udvikler os hele tiden.

• Top kvalitet • Hurtig levering• Konkurrencedygtige priser

ES Machinery

Produktion af maskiner, komponenter og dele

kvalitetsbevidst ordreproducerende maskinfabrik

Euro Service A/S • Højmarken 18 • DK-5492 Vissenbjerg • Tel. +45 63130707 • Fax +45 63130808 • E-mail: es@euro-service.dk www.euro-service.dk

Catalogue Euro Service O E M Products

Business