Post on 31-Jul-2021
transcript
CERTIFICATONr. 50 100 2313 - Rev.020
Certificati co-titolari collegati (ultima revisione applicabile): Connected to the sub-certificates (last version): 50 100 2313/1 Rev.003; 50 100 2313/5 Rev.009
Si attesta che / This is to certify that
IL SISTEMA QUALITÀ DITHE QUALITY SYSTEM OF
CUSTOM S.p.A.
SEDE LEGALE E OPERATIVA:REGISTERED OFFICE AND OPERATIONAL SITE:
VIA BERETTINE 2/B IT - 43010 FONTEVIVO (PR)
ALTRE SEDI OPERATIVE: VEDI ALLEGATO 1OTHER OPERATIONAL SITES: SEE ANNEX 1
È CONFORME AI REQUISITI DELLA NORMA
HAS BEEN FOUND TO COMPLY WITH THE REQUIREMENTS OF
UNI EN ISO 9001:2015
QUESTO CERTIFICATO È VALIDO PER IL SEGUENTE CAMPO DI APPLICAZIONE
THIS CERTIFICATE IS VALID FOR THE FOLLOWING SCOPE
Progettazione, fabbricazione e assistenza post-vendita di stampanti,apparecchi misuratori fiscali (registratori di cassa), meccanismi di
stampa, schede elettroniche e sistemi per la pesatura a funzionamentonon automatico. Controllo di conformità e verificazione periodica diapparecchi misuratori fiscali. Verifica di conformità di sistemi per lapesatura a funzionamento non automatico. Commercializzazione di
componenti accessori a marchio proprio e di terzi (IAF 19, 34, 29)
Design, manufacture and after-sales service of printing units, fiscalmeasuring equipment (cash equipment), printing devices, electronic
cards and non-automatic weighing systems. Control of conformity andperiodical verification of fiscal measuring equipment. compliance
verification of non-automatic weighing systems. Trade of accessories,printing units and lottery devices, scanners and media players, betting
terminals with own brand and that of other companies (IAF 19, 34, 29)
Per l’Organismo di CertificazioneFor the Certification Body
TÜV Italia S.r.l.
Validità /Validity
Dal / From: 2020-12-14
Al / To: 2023-12-13
Data emissione / Issuing Date
Andrea CosciaDirettore Divisione Business Assurance
2020-12-08
PRIMA CERTIFICAZIONE / FIRST CERTIFICATION: 2003-01-27
“LA VALIDITÀ DEL PRESENTE CERTIFICATO È SUBORDINATA A SORVEGLIANZA PERIODICA A 12 MESI E AL RIESAME COMPLETO DEL SISTEMA DIGESTIONE AZIENDALE CON PERIODICITÀ TRIENNALE”
“THE VALIDITY OF THE PRESENT CERTIFICATE DEPENDS ON THE ANNUAL SURVEILLANCE EVERY 12 MONTHS AND ON THE COMPLETE REVIEW OFCOMPANY'S MANAGEMENT SYSTEM AFTER THREE-YEARS”
ALLEGATO 1 AL CERTIFICATO NR 50 100 2313 - Rev.020ANNEX 1 TO CERTIFICATE NO 50 100 2313 - Rev.020
pagina 1 di 3 / page 1 of 3
IL CERTIFICATO NR 50 100 2313 (ultima revisione applicabile) COPRE ANCHE LE SEGUENTI SEDI OPERATIVE:THE CERTIFICATE N 50 100 2313 (last version) COVERS ALSO THE FOLLOWING OFFICES:
CUSTOM S.p.A.
VIA BERETTINE 2 IT - 43010 FONTEVIVO (PR)
VIA SETTE FRATELLI CERVI 1 IT - 43010 FONTEVIVO (PR)
VIA BERNA 8 IT - 43010 FONTEVIVO (PR)
Progettazione, fabbricazione e assistenza post-vendita di stampanti,apparecchi misuratori fiscali (registratori di cassa), meccanismi di
stampa, schede elettroniche e sistemi per la pesatura a funzionamentonon automatico. Controllo di conformità e verificazione periodica diapparecchi misuratori fiscali. Verifica di conformità di sistemi per lapesatura a funzionamento non automatico. Commercializzazione di
componenti accessori a marchio proprio e di terzi (IAF 19, 34, 29)
Design, manufacture and after-sales service of printing units, fiscalmeasuring equipment (cash equipment), printing devices, electronic
cards and non-automatic weighing systems. Control of conformity andperiodical verification of fiscal measuring equipment. Compliance
verification of non-automatic weighing systems. Trade of accessories,printing units and lottery devices, scanners and media players, betting
terminals with own brand and that of other companies (IAF 19, 34, 29)
Per l’Organismo di CertificazioneFor the Certification Body
TÜV Italia S.r.l.
Validità /Validity
Dal / From: 2020-12-14
Al / To: 2023-12-13
Data emissione / Issuing Date
Andrea CosciaDirettore Divisione Business Assurance
2020-12-08
PRIMA CERTIFICAZIONE / FIRST CERTIFICATION: 2003-01-27
“LA VALIDITÀ DEL PRESENTE CERTIFICATO È SUBORDINATA A SORVEGLIANZA PERIODICA A 12 MESI E AL RIESAME COMPLETO DEL SISTEMA DIGESTIONE AZIENDALE CON PERIODICITÀ TRIENNALE”
“THE VALIDITY OF THE PRESENT CERTIFICATE DEPENDS ON THE ANNUAL SURVEILLANCE EVERY 12 MONTHS AND ON THE COMPLETE REVIEW OFCOMPANY'S MANAGEMENT SYSTEM AFTER THREE-YEARS”
ALLEGATO 1 AL CERTIFICATO NR 50 100 2313 - Rev.020ANNEX 1 TO CERTIFICATE NO 50 100 2313 - Rev.020
pagina 2 di 3 / page 2 of 3
IL CERTIFICATO NR 50 100 2313 (ultima revisione applicabile) COPRE ANCHE LE SEGUENTI SEDI OPERATIVE:THE CERTIFICATE N 50 100 2313 (last version) COVERS ALSO THE FOLLOWING OFFICES:
CUSTOM S.p.A.
VIA ENRICO FERMI 4 IT-43010 FONTEVIVO (PR)
Vendita di stampanti, apparecchi misuratori fiscali (registratori dicassa), meccanismi di stampa, schede elettroniche e sistemi per lapesatura a funzionamento non automatico. Commercializzazione di
componenti accessori a marchio proprio e di terzi (IAF 19, 29)
Sales of printing units, fiscal measuring equipment (cash equipment),printing devices, electronic cards and non-automatic weighing
systems. Trade of accessories, printing units and lottery devices,scanners and media players, betting terminals with own brand and that
of other companies (IAF 19, 29)
VIA TOGNASCA 7 IT - 21013 GALLARATE (VA)
Progettazione firmware, post vendita di stampanti, apparecchimisuratori fiscali (registratori di cassa), meccanismi di stampa, schede
elettroniche e sistemi di pesatura. Controllo di conformità, verificazione periodica e assistenza di apparecchi misuratori fiscali
(IAF 19, 34)
Firmware design, manufacture of printing units, fiscal measuringequipment (cash equipment), printing devices, electronic cards andnon-automatic weighing systems. Control of conformity, periodical
verification of fiscal and after-sales service fiscal measuringequipment (cash equipment) (IAF 19, 34)
Per l’Organismo di CertificazioneFor the Certification Body
TÜV Italia S.r.l.
Validità /Validity
Dal / From: 2020-12-14
Al / To: 2023-12-13
Data emissione / Issuing Date
Andrea CosciaDirettore Divisione Business Assurance
2020-12-08
PRIMA CERTIFICAZIONE / FIRST CERTIFICATION: 2003-01-27
“LA VALIDITÀ DEL PRESENTE CERTIFICATO È SUBORDINATA A SORVEGLIANZA PERIODICA A 12 MESI E AL RIESAME COMPLETO DEL SISTEMA DIGESTIONE AZIENDALE CON PERIODICITÀ TRIENNALE”
“THE VALIDITY OF THE PRESENT CERTIFICATE DEPENDS ON THE ANNUAL SURVEILLANCE EVERY 12 MONTHS AND ON THE COMPLETE REVIEW OFCOMPANY'S MANAGEMENT SYSTEM AFTER THREE-YEARS”
ALLEGATO 1 AL CERTIFICATO NR 50 100 2313 - Rev.020ANNEX 1 TO CERTIFICATE NO 50 100 2313 - Rev.020
pagina 3 di 3 / page 3 of 3
IL CERTIFICATO NR 50 100 2313 (ultima revisione applicabile) COPRE ANCHE LE SEGUENTI SEDI OPERATIVE:THE CERTIFICATE N 50 100 2313 (last version) COVERS ALSO THE FOLLOWING OFFICES:
CUSTOM S.p.A.
VIA BRUNO MADERNA 7 IT – 30174 VENEZIA (VE)
Assistenza post vendita di stampanti, apparecchi misuratori fiscali(registratori di cassa), meccanismi di stampa (IAF 19)
After-sales service of printing units, fiscal measuring equipment (cashequipment), printing devices (IAF 19)
GLIMBOCA 282/A 327220 CARAŞ – SERVERIN (ROMANIA)
Fabbricazione di stampanti, apparecchi misuratori fiscali (registratoridi cassa) e meccanismi di stampa su specifica CUSTOM SpA. Controllo di conformità e verificazione periodica di apparecchi
misuratori fiscali (IAF 19, 34)
Manufacture of printing units, fiscal measuring equipment (cashequipment), printing devices, electronic cards. Control of conformityand periodical verification of fiscal measuring equipment. Control ofconformity and periodical verification of fiscal measuring equipment
(IAF 19, 34)
VIA ALESSANDRIA SNC FRAZIONE SAN BERNANRDO DI IVREAIT - 10015 IVREA (TO)
STRADA PROVINCIALE PER MAZZÉ 21 IT - 10035 MAZZE' (TO)
VIA MOMBARONE 5 IT- 10010 BUROLO (TO)
Assemblaggio di stampanti e apparecchi misuratori fiscali - controllo di conformità/Verificazione periodica di apparecchi misuratori fiscali
(IAF 19, 34)
Manufacture of fiscal measuring equipment (cash equipment). Controlof conformity and periodical verification of fiscal measuring equipment
(IAF 19, 34)
Per l’Organismo di CertificazioneFor the Certification Body
TÜV Italia S.r.l.
Validità /Validity
Dal / From: 2020-12-14
Al / To: 2023-12-13
Data emissione / Issuing Date
Andrea CosciaDirettore Divisione Business Assurance
2020-12-08
PRIMA CERTIFICAZIONE / FIRST CERTIFICATION: 2003-01-27
“LA VALIDITÀ DEL PRESENTE CERTIFICATO È SUBORDINATA A SORVEGLIANZA PERIODICA A 12 MESI E AL RIESAME COMPLETO DEL SISTEMA DIGESTIONE AZIENDALE CON PERIODICITÀ TRIENNALE”
“THE VALIDITY OF THE PRESENT CERTIFICATE DEPENDS ON THE ANNUAL SURVEILLANCE EVERY 12 MONTHS AND ON THE COMPLETE REVIEW OFCOMPANY'S MANAGEMENT SYSTEM AFTER THREE-YEARS”