Post on 20-Nov-2021
transcript
423
Grease separator for ground installation
Ground installation
Basic design up to load class: D 400 ■
With direct suction for disposal without odour build-up ■
With direct suction and high-pressure interior cleaning for disposal without odour ■
build-up and simultaneous cleaning of the container.
Grease separator for free-standing installation
Free-standing installation
With complete disposalMobile separator for food stall or marquee ■
Basic design for disposal via the cover ■
Extension stage 1 for disposal via direct suction ■
Extension stage 2 with manual high-pressure interior cleaning and optional disposal ■
pump for disposal without odour build-upExtension stage 3 with automatic high-pressure interior cleaning and optional dispo- ■
sal pump and remote control for disposal without odour build-upAvailable in oval curved or split design for optimal installation ■
With partial disposalOptionally available in manual or automatic design. ■
423
10
K9/1
Grease separator
Separator Grease separator
Chapter contents
Informations
General informations . . . . . . . . . . . .424
Dimensioning according EN 1825-2 . .430
424
10
K9/1
Grease separatorPlanning references
Separator Grease separator
General information
The applications
The industrial sources of waste water must ensure through appropriate pre-treatment facilities that substances and liquids, which spread noxious fumes and nuisance odours, affect building materials and drainage systems or interfere with the operation, will not enter public pipes. In establishments where grease-containing waste water accumulates, grease traps according to EN 1825/DIN 4040-100 must be installed to guarantee the reten-tion of greases and oils of an organic origin from the waste water. This applies, for example, for kitchen operations and meat processing plants.
A double lifting plant or complete pump-ing station must be provided after each grease separator that is installed below the backflow level (generally the street level). The individual requirements placed on grease separators, lifting plants and com-plete pumping stations require adjustable product in various sizes and materials. ACO Haustechnik had an extensive prod-uct range of grease separators, lifting plants and complete pumping stations for the ground installation and free-standing installation for decades.
The standards and tests
All grease separators by ACO Haustechnik are produced according to the applicable standards EN 1825 and DIN 4040-100. The grease separators listed in the product range are hydraulically tested and have a general official approval, i.e. the new application permit from DIBt Berlin. The separator systems furthermore are subject to a routine inspection by the Landesgewerbeanstalt Bayern that checks the separator production for the adherence to the currently applicable test standards.
The application scope
Butcher shops with and without ■
slaughterSlaughterhouses (large-scale slaughter- ■
houses)Meat and sausage factories, with or ■
without slaughterUtilisation of animal carcasses ■
Poultry slaughterhouses ■
Bowel preparation facilities ■
Hotels ■
Restaurants ■
Food distribution points with return ■
tablewareCafeterias ■
Interstate service areas ■
Cafeterias ■
Kitchens in hospitals ■
Canneries ■
Cooking oil refineries ■
Ready-meals manufacturer ■
Peanut roasters ■
Grilling, frying and deep frying kitchens ■
Fries and chips products ■
j
Principles and function
A grease separator operates purely physical according to the gravity principle (density difference), i.e. heavy waste.water components sink to the bottom, light material such as animal oils and fats rise to the top in the separator. The sediments in the sludge trap and the grease layer are selectively destroyed at up to 175 bar by the high pressure jet of the special orbital cleaning head and ho-mogenized capable of pumping. Depend-ing on the location of the installation site , the separator content can be pumped to the disposal vehicle via an on-site perma-nently installed line or be further trans-ported with an optional disposal pump.
Function diagram of the grease separator according to EN 1825
425
10
K9/1
Grease separatorPlanning references
Separator Grease separator
Installation
When install in the ground and when in the building?
There are two installation situations for grease separators: Free standing grease separators and grease separators for underground installation. Precondition for easy disposal, maintenance and cleaning of the grease separator is a readily ac-cessible installation location. In addition, always verify that the pipe between the accumulation point the grease containing waste water and grease separator is kept
as short as possible. Furthermore, the installation may not be done in unventi-lated rooms or in traffic or storage areas. The setup may not be made in the vicinity of living quarters. The most important criteria that must be considered when choosing between a free-standing or underground installation are discussed in the following.
Installation in the ground
Installation in green spaces
Manhole covers must be odour sealed. A manhole cover of Load class A 15 is sufficient.
Recommendation: The location where the disposal vehicle is parked should be attached.
Access routes
Installation possibly outside the directly accessed area. Odour sealed manhole covers of Load class B 125 are generally sufficient. When installing directly in the roadway, a Load class D 400, odour-sealed, must be provided.
Courtyards
Critical installation points ■
Courtyards are critical in reference to odours during the operation and disposal:
During operation, odours due to loosely 1. attached, manhole covers that are not odour sealed are possible.
Strong odours when opening the man-2. hole covers during disposal.
Solution
Equipping the separators with a so-called direct suction. Installing the suction pipe in the ground, for example, on an exterior wall of the building, easily accessible for the disposal vehicle. Suction line prefera-bly made of PE-HD pressure pipe minimum 6-PN 65/80 DN. The disposal via direct extraction has the distinct advantage that the manhole cover remains closed during the first suctioning process, so that an odour will not develop. The manhole covers are not opened until rinsing the disposal shaft with pressurized water from the disposal vehicle. Since the separa-tor chamber has already been emptied by suction, the fumes were also partially extracted, so that only minimal odours occur. If the disposal vehicle is equipped with a functioning carbon filter for the tank exhaust, there will hardly be any com-plaints from the affected residents.
426
10
K9/1
Grease separatorPlanning references
Separator Grease separator
Installation in buildings
The installation in buildings has increased over the past 15 years. Reasons for this are that, for example, barely any open spaces are available for the underground installation due to renovations of old build-ings, changes of use of existing buildings and naturally also due to the high by the high building density. Grease separators are installed in the immediate vicinity of the waste water accumulation point (EN 1825-2).
Installation room
The installation room must be separate, dry and provided with a functioning ventila-tion system. The installation area of the grease separator must be level. The waste water should be transported to the grease separator at a free drop of at least 1:50. Pumps in front of the grease separators have the serious disadvantage that grease and waste water are thoroughly mixed, the separation is hampered, and limit viola-
tions are inevitable. If unavoidable due to structural conditions, these disadvantages can be almost eliminated by using a spe-cial lifting plant with displacement pumps.
The connection between the access road, installation and design
The access routes to the installation room must also be observed in the free-standing installation. In order to select the proper
separator, which can also be installed via stairways, winding corridors or light wells, the conditions on-site must be known.
Various designs allow an installation as needed.
Oval structure
such as Eco-Jet OD
Adjusted to current door dimensions ■
Separator of stainless steel ■
NS 1 – 4: max. width 760 mm �NS 5.5 – 10: max. width 1,010 mm �
Separator of polyethylene ■
NS 1 – 4: max. width 770 mm �NS 5.5 – 10: max. width 1,020 mm �
Round structure
such as Lipurat-RS
Can be knocked down into single seg- ■
mentsFor example, recommend for access ■
routes with a right angleAdaptation of the NS subsequently on-site ■
is possible by exchanging centre seg-ments (e.g. from NS 7 to NS 10)Number of segments: ■
NS 2 – 4: 2 segments, Ø 1,000 mm �NS 7 – 10: 3 segments, Ø 1,500 mm �NS 15 – 20: 3 segments, Ø 1,750 mm �
divided structure
such as Eco-Jet G/GD
Particularly suitable for renovations with ■
narrow insertion openingsCan be dismantled into 3 segments ■
Max. segment dimensions (LxWxH): ■
NS 2: 670 x 700 x 1,360 mm �NS 4: 1,140 x 700 x 1,360 mm �
Construction site welding
such as Fapurat-PE-OAE
For extreme installations (narrow stair- ■
ways, elevator shafts)Grease separator is delivered in single ■
parts, welded and checked for leaks on-site
427
10
K9/1
Grease separatorPlanning references
Separator Grease separator
Installation below the backflow level, lifting plant for grease separator
The drainage via a double lifting plant must be guaranteed when installing the grease separator below the backflow level. The top edge of the street (curb) typically forms the backflow level for grease separators, which are installed in the basement. Almost every grease separator must therefore be drained via a double lifting plant. This should be strictly observed, especially in case of free-stand-ing separators in buildings, even if only an occasional backflow risk exists.
� Grease separator
� Lifting plant
� Vent pipe (separate over the roof)
� Backflow loop
"Separators for greases with the static water level below the backflow level (see EN 752-1), must be drained via a lifting plant downstream." (Excerpt from EN 1825-2, Sec 7.3)
The grease separator is only suitable and approved for a pressure-free operation. Odour sealed does not mean backflow secure! When selecting the lifting plant, it must be noted that a double lifting plant is installed (regulation in the industrial and commercial sector) to ensure an uninter-rupted operation in case of a pump failure. It is also important to note that a second
separation of the grease constituents can occur in the waste water after each grease separator, which would result in deposits in the lifting plant tank. Routine inspections of lifting plant in conjunction with the grease separator maintenance are therefore necessary. These grease deposits also affect the components of the level measurement, such as the float
switch, the ball float switch and pitot tubes with a small cross-section nega-tively. Level measurements with a large dimensioned Pitot tube cross-section with air bubble injection for self-cleaning must be installed.
Function of the air bubble injec-tion
Air is continuously blown into the pitot tube via a compressor. The rising air bub-bles at the end of the pitot tube provide a constant movement below the pitot tube, so that float cover forming media cannot settle (such as residual grease from the separator). This guarantees is very reliably working level measurement.
��
� �
�
428
10
K9/1
Grease separatorPlanning references
Separator Grease separator
Additional information for routing, operation and maintenance
Routing, ventilation (EN 1825-2)
When installing the inlet pipe through ■
unheated or open-access areas with a frost risk, this section must be equipped with an additional pipe heater (e.g., self-regulating heating tapes and insulation).
Inlet pipes require a careful design ■
and installation, since the separator efficiency can already be positively or negatively affected here.
Vertical inlet pipes must be designed as ■
follows at the transition to the hori-zontal pipe, in order to prevent undue turbulence of the waste water and its grease components: Vertical downpipe, 45 ° bend, straight pipe section of at least 250 mm or more, 45 ° bend, horizontal piping in the inlet of grease separators at least 10 x DN length long (for example: DN 100 = 1,000 mm, DN 150 = 1,500 mm).
Inlet and outlet pipes on grease separa- ■
tors must be sufficiently ventilated. The vent line must be routed up to over the roof for this purpose. (EN 1825-2)
More horizontal connecting lines longer ■
than 5m are must also be bled. If the horizontal inlet line has a length of more than 10 m and no other additional ven-tilated connecting lines, the inlet pipe must be provided by an additional vent line directly near the separator inlet. (EN 1825-2)
429
10
K9/1
Grease separatorPlanning references
Separator Grease separator
Sampling
Pros and cons of sampling shafts/ sam-pling pipes for the so-called integrated sampling options in the grease separator: Sampling shafts in underground installa-tion and sampling pipe in the free-standing installation have an open pipe end on the interior of the inlet with a drop of at least 160 mm on the pipe bottom outlet to the channel (see DIN 4040-100, Item 5.5.2). Proper and safe sampling by the authori-ties is only possible with this arrangement
with the recommended wide-mouth bottle with the necessary supervision. Other key advantages of this type, especially in the underground installation, good accessibil-ity to the outlet drain to the channel and that of the grease separator, for inspec-tion, especially for studies with a video camera and for cleaning with the HD-street washer.
Only where the drop cannot be realized due to structural conditions or the sam-pling shaft/sampling pipe are not installed due to the lack of space, the integrated sampling must be tolerated for cost reasons, among others (bottom drop must equal at least 30 mm - DIN 4040-100, item 5.5.2). The use of an integrated sampling equipment must be clarified in advance with the authorities.
Disposal (DIN 4040-100, item 12.2)
Sludge trap and separator must be com-pletely emptied and cleaned at least once a month, preferably every two weeks. The separators must subsequently be refilled
with water (such as drinking water, proc-ess water, treated water from the grease separator), which corresponds with the local inlet regulations.
General inspection (DIN 4040-100, item 12.4)
Excerpt from DIN 4040-100, item 12.4: "Prior to the start-up and periodically thereafter at intervals no longer than 5 years, the separators must be checked by an expert for its proper condition and proper operation after first completely emptying and cleaning."
Emphasis in the inspection are prima-rily the dimensioning of the separator, the structural condition and seal of the separator, the condition of interior walls, fittings, electrical equipment, construction of inlet and ventilation ducts, complete-ness of the operation log, proof of proper
disposal and the availability of required authorizations and documents.
Operating log (DIN 4040-100, item 12.5)
An operating log must be maintained for each grease separator. The following must be entered in the log: Completed
inspections, maintenance, checks and dis-posals. The operating logs must be stored by the operator and must be presented
to the locally responsible authority upon request.
Application limits
Excerpts: "Materials that could affect the separator system, such as chopped coarse materi-als and solids, including the waste water contents from wet disposal systems, cannot be discharged. " (Excerpt DIN 4040-100, Item 10.1) "The targeted use of biological active agents, e.g. enzyme-containing products for converting fatty substances, or the so-called self-cleaning is not acceptable. " (Excerpt DIN 4040-100, Item 10.1) "If detergents, dish soaps, cleansing
agents, disinfectants and expedients enter the waste water, they must be separa-tor friendly and may not form stable emulsions. Dish soaps and and cleaning products should not contain or release chlorine. "(Excerpt DIN 4040-100, Item 10.1) "Grey water, in which a significant share of grease is present in non-separable, i.e. emulsified form, for example from dairies, cheese dairies, fish processing plants or from catering services with a pure rinsing operation, as well as from
Waste treatment plants are only effectively treated in grease separators under certain conditions. Another treatment of the waste water may be required." (Excerpt EN 1825-2, item 4) "Systems in which waste water contains the rapidly decaying sediments, e.g. in the fish industry, no sludge trap must be installed, however, these grease separa-tors must be equipped with a strainer or a screen ... " (Excerpt from EN 1825-2, Sec 4)
Maintenance (DIN 4040-100, item 12.3)
The separator must be maintained annu-ally by a competent person according to the manufacturer's specifications.
430
10
K9/1
Grease separatorDimensioning according to EN 1825-2
Separator Grease separator
General information
Consignor
Telephone Fax
Project/installation site
Replanning Reconstruction
Owner
Telephone Fax
Offer to
Information
These records were received on the basis of:
Telephone conversation with:
Site visit with:
Please note required remarks / amendments under clause 6, or on a separate sheet
431
10
K9/1
Grease separatorDimensioning according to EN 1825-2
Separator Grease separator
1. Waste water type and composition
1.1 Where is the waste water from?
Boarding facility All-day commercial kitchen Hospital canteens Factory Kitchen / Canteen Hotel kitchen Specialty restaurant
Slaughterhouse/ meat process- ing plant
Meat products plant with slaughter Meat products plant without slaugh- terButcher shop with slaughter Butcher shop without slaughter Supermarket with processing / salesPoultry abattoir
Oil/grease processing operation Margarine factory Oil mill Cooking oil refinery Peanut roaster Fries and chips production Cannery Ready-meals manufacturing Fish processing plant Rendering plant
1.2 Waste water contents
Sediments Rapidly rotting sediments
Fats Which? Density (spec. weight) = [g/cm3
continuous l/weekdiscontinuous l/weekintermittent (e.g. malfunction) l/week
Rinsing and cleaning agents If rinsing and cleaning agents are used, they must be used as sparingly, in order to maintain the separability of the oils and greases as much as possible (observe the dosage amount by the manufacturer).
Other waste water contents
2. Inlet conditions
Residual grease content max. mg/l measured according to DN 38409 part 17
max. approved temperature at the intake °C
3. Dimensioning
3.1 according to kitchen furnishings and discharge valves
3.2 according to food servings in commercial kitchens
3.3 for meat processing plants, sausage production / cutting plants
432
10
K9/1
Grease separatorDimensioning according to EN 1825-2
Separator Grease separator
3.1 according to kitchen furnishings and discharge valves
m Furnishings Quan-tity n
qi
[l/s]
(n x qi) Simultaneity factor Zi (n) Grey water Qsfor 1
unit for 2 units
for 3 units
for 4 units
for ≥ 5 units
1 Kettle spout 25 mm .......... x 1 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s2 Kettle spout 50 mm .......... x 2 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s3 Tilting kettle outlet 70 mm .......... x 1 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s4 Tilting kettle outlet 100 mm .......... x 3 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s5 Sink with odour-seal, 40 mm .......... x 0,8 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s6 Sink with odour-seal, 50 mm .......... x 1,5 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s7 Sink without odour-seal, 40 mm .......... x 2,5 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s8 Sink without odour-seal, 50 mm .......... x 4 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s9 Dishwasher .......... x 2 = .............. l/s x 0.60 x 0.50 x 0.40 x 0.34 x 0.30 .............. l/s
10 Tilting frying pan .......... x 1 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s11 Frying pan .......... x 0,1 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s
12 High pressure/steam cleaning equipment .......... x 2 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s
13 Peeling device .......... x 1,5 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s14 Vegetable washing device .......... x 2 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s
TapNominal diameter/threaded connection according to DN ISO 228-1
15 DN 15 R ½ .......... x 0,5 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s16 DN 20 R ¾ .......... x 1 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s17 DN 25 R 1 .......... x 1,7 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s
Total Qs
.............. l/s
Difficulty factor
Density (fd) up to 0.94 g/cm3 = fd 1,0 more than 0.94 g/cm3 = fd 1,5
Intake temperature (ft) up to 60° = ft 1,0 over 60° = ft 1,3
Cleaning agents (fr) no = fr 1,0 yes = fr 1,3 fr 1.5 or greater in hospitals
Explanation:
m = Serial number of the object
n = Number of furnishings
qi = the maximum grey water outflow in l/s
Zi (n) = the factor of concurrency of use
NS = Nominal size
Nominal size
NS = Qs x fd x ft x fr Please select the next highest NS!
NS = x x x = Selected: NS...........................
433
10
K9/1
Grease separatorDimensioning according to EN 1825-2
Separator Grease separator
3.2 according to food servings in commercial kitchens
Commercial kitchens
M= Meals (number) of monthly average of the daily produced hot food portions
VM=company-specific water per hot food serving
F= Impact load factor in reference to the op-erating conditions
Hotel kitchen .......... Meals/daily x 100 l = ................. x 5 = ............................. l
Specialty restaurant .......... Meals/daily x 50 l = ................. x 8.5 = .......................... l
Canteen / cafeteria .......... Meals/daily x 5 l = ................. x 20 = ........................... l
Hospitals .......... Meals/daily x 20 l = ................. x 13 = ........................... l
All-day commercial kitchen .......... Meals/daily x 10 l = ................. x 22 = ........................... l
Commercial kitchens
t= daily operating hours in which the separator is charged with grey water
Waste water Qs
Hotel kitchen =.............................................. Litre
..... Operating hours x 3600 seconds = .......................... l/s
Specialty restaurant =.............................................. Litre
..... Operating hours x 3600 seconds = .......................... l/s
Canteen / cafeteria =.............................................. Litre
..... Operating hours x 3600 seconds = .......................... l/s
Hospitals =.............................................. Litre
..... Operating hours x 3600 seconds = .......................... l/s
All-day commercial kitchen =.............................................. Litre
..... Operating hours x 3600 seconds = .......................... l/s
Difficulty factor
Density (fd) up to 0.94 g/cm3 = fd 1,0 more than 0.94 g/cm3 = fd 1,5
Intake temperature (ft) up to 60° = ft 1,0 over 60° = ft 1,3
Cleaning agents (fr) no = fr 1,0 yes = fr 1,3 fr 1.5 or greater in hospitals
Nominal size
NS = Qs x fd x ft x fr Please select the next highest NS!
NS = x x x = Selected: NS............................
434
10
K9/1
Grease separatorDimensioning according to EN 1825-2
Separator Grease separator
3.3 Sausage production/cutting operations
Sausage production
Size of the meat processing plant
Large animal units, slaughter per week
M= Sausage production in kg/daily
Vp= operational water volume per kg of sau-sage production
Small sausage production up to 100 kg daily
when slaughtering up to 5 cat-tle or 12.5 pigs each week ........................... kg / daily x 20 l = ......................
Medium sausage production 101 to 200 kg daily
when slaughtering up to 10 cattle or 25 pigs each week ........................... kg / daily x 15 l = ......................
Large sausage production 201 to 800 kg daily
when slaughtering up to 40 cattle or 100 pigs each week ........................... kg / daily x 10 l = ......................
Size of the meat processing plant
F= Impact load factor depending on operat-ing conditions
t= daily operating hours in which the separator is charged with grey water
Waste water Qs
Small sausage production up to 100 kg daily
x 30 =.......................................... Litre
.. Operating hours x 3600 seconds Qs= .......................... l/s
Medium sausage production 101 to 200 kg daily
x 35 =.......................................... Litre
.. Operating hours x 3600 seconds Qs= .......................... l/s
Large sausage production 201 to 800 kg daily
x 40 =.......................................... Litre
.. Operating hours x 3600 seconds Qs= .......................... l/s
Meat cutting operations without meat and sausage production; grey water mainly accumulates during cleaning
m Fitting objects
Quan-tity n
qi
[l/s]
(n x qi) Simultaneity factor Zi (n) Grey water Qs for 1
unit for 2 units
for 3 units
for 4 units
for > 5 units
15 DN 15 .......... x 0,5 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s16 DN 20 .......... x 1 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s17 DN 25 .......... x 1,7 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s
12 High pressure/steam cleaning equipment .......... x 2 = .............. l/s x 0.45 x 0.31 x 0.25 x 0.21 x 0.20 .............. l/s
Total Qs
.............. l/s
Difficulty factor
Density (fd) up to 0.94 g/cm3 = fd 1,0 more than 0.94 g/cm3 = fd 1,5Intake temperature (ft) up to 60° = ft 1,0 over 60° = ft 1,3Cleaning agents (fr) no = fr 1,0 yes = fr 1,3
Nominal size
NS = Qs x fd x ft x fr Please select the next highest NS!
NS = x x x = Selected: NS...........................
435
10
K9/1
Grease separatorDimensioning according to EN 1825-2
Separator Grease separator
4. Content determination of sludge trap
Restaurants/ catering facilities; Butchers / meat factories without slaughter, supermarkets, other com-parable establishments NS x 100 litres = l
Slaughterhouses; Butchers / meat factories with slaughter, other industrial plants with increased sludge NS x 200 litres = l
selected content:
l
5. Execution of the separator system
Separator for
Free-standing installation Underground installation with cover Load class (A,B,D)
Frost-free depth mm
Material
PE-HD Stainless steel (only for free-standing installation)
Fittings
with direct extraction or with HP interior cleaning
manual automatic
with disposal pump with additional sampling equipment with filling unit
with inspection window with coarse trap
Control unit
Surface mount or Flush Housing:
Insulated housing Steel housing
Remote control Interior assembly Exterior assembly
Distance of the control box to the separator m
in the building on the property
other dimensions
Replanning: Nominal size NS or number of meals per day Renovation of existing plant type
with waste water lifting plant: delivery head (suction height) geo.
m. Nominal width DN Length of the disposal pipe: m Number of bends DN 90°/45°
Pit /assembly area: L x W x H mmInlet: DN inlet height: mm
Disposal: Opening L x W mm or diameter mm
Stairs / corridor / passage: x W x H mm x B x H mm
6. Comments
City, Date Signature
Comment:
Our recommendations for planning and dimensioning must be generally verified non-binding and by the party responsible for the construction.
Page
Grease separator – complete disposal
Compact design – polyethylene (HD-PE)
Eco-FPI 438
Eco-FPI with direct suction 440
Accessories 442
Separator Grease separator Ground installation
437437
Page
Grease separator – complete disposal
Compact design – polyethylene (HD-PE)
Eco-FPI 438
Eco-FPI with direct suction 440
Accessories 442
Gre
ase
sep
arat
or
Gro
un
d i
nst
alla
tio
n
10
K9/1
Grease separator for ground installation
Separator Grease separator Ground installation
Section contents
438
Gre
ase
sep
arat
or
Gro
un
d i
nst
alla
tio
n
10
K9/1
Grease separator – complete disposalCompact design– polyethylene (HD-PE)
Separator Grease separator Ground installation
Eco-FPI
Product information
ACO product advantages
Load class up to D 400 (corresponds ■
to SLW 60) – without customer-side load distributionLow installation costs - separator, ■
sludge trap, sampling in a containerAdditional heavy duty crane not ■
necessaryBuoyancy safety for a groundwater ■
level of up to max 1 m over base plateEasy cleaning due to curved shape ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For ground installation ■
Polyethylene base body (double-walled ■
windable pipe)Reinforced concrete cover plate in ■
accordance with DIN 19537For NS 1 – 4: � Ø1000/625 x 200 mmFor NS 7 – 10: �
Ø1500/625 x 200 mmWith integrated sludge trap ■
Inlet and drainage connections in accor- ■
dance with EN 877Manhole cover in accordance with ■
EN 124Without ventilation opening �
Reference dimensions: 625 mm �
Screwed odour-tight �
System ACO Passavant ■
Official approval Z-54.1-411 �
Ordering information
Nominal size Nominal width
Capacity Weight Article No.
Sludge trap Grease sto-rage
Total capacity B 125 D 400
[l] [l] [l] [kg]
NS 1DN 100 100 120 615 710 3201.55.00 3201.55.01DN 100 200 120 715 710 3201.56.00 3201.56.01
NS 2DN 100 200 120 715 710 3202.55.00 3202.55.01DN 100 400 120 915 725 3202.56.00 3202.56.01
NS 3DN 100 300 120 815 725 3203.55.00 3203.55.01DN 100 600 120 1115 760 3203.56.00 3203.56.01
NS 4DN 100 400 160 915 725 3204.55.00 3204.55.01DN 100 800 160 1315 760 3204.56.00 3204.56.01
NS 7DN 150 700 400 1950 1540 3207.55.00 3207.55.01DN 150 1400 400 2660 1610 3207.56.00 3207.56.01
NS 10DN 150 1000 400 2250 1575 3210.55.00 3210.55.01DN 150 2000 400 3250 1665 3210.56.00 3210.56.01
439
Gre
ase
sep
arat
or
Gro
un
d i
nst
alla
tio
n
10
K9/1
Grease separator – complete disposalCompact design– polyethylene (HD-PE)
Separator Grease separator Ground installation
Dimensions
H 1
ØD
T
inletDN...
H 2
Ø D 2
outletDN...
Ø 600
Ø D 1
outletDN...
inletDN...
Nominal size Sludge trap DimensionsH1 H2 D D1 D2 T
[l] [mm] [mm] [mm] [mm] [mm] [mm]
NS 1100 885 785 110 1000 1250 695200 1010 910 110 1000 1250 570
NS 2200 1010 910 110 1000 1250 570400 1265 1165 110 1000 1250 560
NS 3300 1140 1040 110 1000 1250 685600 1520 1420 110 1000 1250 815
NS 4400 1265 1165 110 1000 1250 560800 1775 1675 110 1000 1250 560
NS 7700 1205 1105 160 1500 1800 650
1400 1605 1505 160 1500 1800 650
NS 101000 1370 1270 160 1500 1800 6852000 1940 1840 160 1500 1800 665
440
Gre
ase
sep
arat
or
Gro
un
d i
nst
alla
tio
n
10
K9/1
Grease separator – complete disposalCompact design– polyethylene (HD-PE)
Separator Grease separator Ground installation
Eco-FPI with direct suction
Product information
ACO product advantages
Direct suction enables disposal ■
without odourLoad class up to D 400 (corresponds ■
to SLW 60) – without customer-side load distributionLow installation costs - separator, ■
sludge trap, sampling in a containerAdditional heavy duty crane not ■
necessaryBuoyancy safety for a groundwater ■
level of up to max 1 m over base plateEasy cleaning due to curved shape ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For ground installation ■
With direct suction DN 80/PN 10 inc. ■
flange/flange connection and Storz coupling 75 BPolyethylene base body (double-walled ■
windable pipe)Reinforced concrete cover plate in ■
accordance with DIN 19537For NS 1 – 4: � Ø1000/625 x 200 mmFor NS 7 – 10: �
Ø1500/625 x 200 mmWith integrated sludge trap ■
Inlet and drainage connections in accor- ■
dance with EN 877Manhole cover in accordance with ■
EN 124Without ventilation opening �
Reference dimensions: 625 mm �
Screwed odour-tight �
System ACO Passavant ■
Official approval Z-54.1-411 �
Ordering information
Nominal size Nominal width
Capacity Weight Article No.
Sludge trap Grease sto-rage
Total capacity B 125 D 400
[l] [l] [l] [kg]
NS 1DN 100 100 120 615 710 3201.55.10 3201.55.11DN 100 200 120 715 710 3201.56.10 3201.56.11
NS 2DN 100 200 120 715 710 3202.55.10 3202.55.11DN 100 400 120 915 725 3202.56.10 3202.56.11
NS 3DN 100 300 120 815 725 3203.55.10 3203.55.11DN 100 600 120 1115 760 3203.56.10 3203.56.11
NS 4DN 100 400 160 915 725 3204.55.10 3204.55.11DN 100 800 160 1315 760 3204.56.10 3204.56.11
NS 7DN 150 700 400 1950 1540 3207.55.10 3207.55.11DN 150 1400 400 2660 1610 3207.56.10 3207.56.11
NS 10DN 150 1000 400 2250 1575 3210.55.10 3210.55.11DN 150 2000 400 3250 1665 3210.56.10 3210.56.11
441
Gre
ase
sep
arat
or
Gro
un
d i
nst
alla
tio
n
10
K9/1
Grease separator – complete disposalCompact design– polyethylene (HD-PE)
Separator Grease separator Ground installation
Dimensions
H 1
ØD
T
inletDN...
H 2
Ø D 2
outletDN...
Ø 600
Ø D 1
outletDN...
inletDN...
45°
Nominal size Sludge trap DimensionsH1 H2 D D1 D2 T
[l] [mm] [mm] [mm] [mm] [mm] [mm]
NS 1100 885 785 110 1000 1250 695200 1010 910 110 1000 1250 570
NS 2200 1010 910 110 1000 1250 570400 1265 1165 110 1000 1250 560
NS 3300 1140 1040 110 1000 1250 685600 1520 1420 110 1000 1250 815
NS 4400 1265 1165 110 1000 1250 560800 1775 1675 110 1000 1250 560
NS 7700 1205 1105 160 1500 1800 650
1400 1605 1505 160 1500 1800 650
NS 101000 1370 1270 160 1500 1800 6852000 1940 1840 160 1500 1800 665
442
Gre
ase
sep
arat
or
Gro
un
d i
nst
alla
tio
n
10
K9/1
Grease separator – complete disposalCompact design– polyethylene (HD-PE)
Separator Grease separator Ground installation
Accessories
Designation compatible with Description Article No.
h
186
Ø620Ø565
625
T =
575
- 130
0
Sampling shaft DN 100
Grease separator Eco-FPI for ■
ground installationNS 1 – 4 �
Starch separator Eco-STP for ■
ground installationNS 0.5 – 1 �
Curator/Coalisator GG ■
NS 1.5 – 3 �
Plastic, material: polyethylene ■
For installation behind the ■
separating plants for ground installationWith BEGU cover ■
Clear diameter: 450 mm �Load class: D 400 �
Odour tight ■
Weight: 128 kg ■
Gradient: 33 mm 3300.13.11
Gradient: 153 mm 3300.13.10
h
185
Ø620Ø565
645
T =
575
- 130
0
Sampling shaft DN 150
Grease separator Eco-FPI for ■
ground installationNS 7 – 10 �
Starch separator Eco-STP for ■
ground installationNS 2 �
Curator/Coalisator GG ■
NS 6 �
Plastic, material: polyethylene ■
For installation behind the ■
separating plants for ground installationWith BEGU cover ■
Clear diameter: 450 mm �Load class: D 400 �
Odour tight ■
Weight: 128 kg ■
Gradient: 75 mm 3300.13.21
Gradient: 159 mm 3300.13.20
Ø450
Ø490
650
45
Ø434
Tensionring
Seal
Extensionpiece
Extension Sampling shaft ■
Plastic, material: polyethylene ■
For fitting on the protruding ■
sampling shaft for deepened installationStructure height: ■
100 – 650 mm (can be shor-tened every 45 mm by cutting along the markings)Weight: 11 kg ■
3300.13.00
60
Ø625
Ø865
Supporting ring
Grease separator Eco-FPI for ■
ground installationStarch separator Eco-STP for ■
ground installation
Concrete ■
Diameter: 625 mm ■
Starch 60 mm ■
Without sealing ■
Not displaceable ■
Height: ■
60 mm without mortar joint �70 mm with mortar joint �
Weight: 50 kg ■
8700.20.00
80
Ø625
Ø865
Supporting ring
Grease separator Eco-FPI for ■
ground installationStarch separator Eco-STP for ■
ground installation
Concrete ■
Diameter: 625 mm ■
Starch 80 mm ■
Without sealing ■
Not displaceable ■
Height: ■
80 mm without mortar joint �90 mm with mortar joint �
Weight: 60 kg ■
8700.20.10
100
Ø625
Ø865
Supporting ring
Grease separator Eco-FPI for ■
ground installationStarch separator Eco-STP for ■
ground installation
Concrete ■
Diameter: 625 mm ■
Starch 100 mm ■
Without sealing ■
Not displaceable ■
Height: ■
100 mm without mortar joint �110 mm with mortar joint �
Weight: 70 kg ■
8700.20.20
443
Gre
ase
sep
arat
or
Gro
un
d i
nst
alla
tio
n
10
K9/1
Grease separator – complete disposalCompact design– polyethylene (HD-PE)
Separator Grease separator Ground installation
Designation compatible with Description Article No.
250
Ø1000
Ø1240
Shaft ring
Grease separator Eco-FPI for ■
ground installationNS 1 – 4 �
Starch separator Eco-STP for ■
ground installationNS 0.5 – 1 �
Concrete in accordance with ■
DIN 4034 part 1Diameter: 1,000 mm ■
Starch 250 mm ■
With sealing ■
With socket ■
Without spur ■
Height: ■
250 mm without mortar joint �265 mm with mortar joint �
Weight: 240 kg ■
8700.42.21
500
Ø1000
Ø1240
Shaft ring
Grease separator Eco-FPI for ■
ground installationNS 1 – 4 �
Starch separator Eco-STP for ■
ground installationNS 0.5 – 1 �
Concrete in accordance with ■
DIN 4034 part 1Diameter: 1,000 mm ■
Starch 500 mm ■
With sealing ■
With socket ■
Without spur ■
Height: ■
500 mm without mortar joint �515 mm with mortar joint �
Weight: 500 kg ■
8700.42.31
1000
Ø1000
Ø1240
Shaft ring
Grease separator Eco-FPI for ■
ground installationNS 1 – 4 �
Starch separator Eco-STP for ■
ground installationNS 0.5 – 1 �
Concrete in accordance with ■
DIN 4034 part 1Diameter: 1,000 mm ■
Starch 1,000 mm ■
With sealing ■
With socket ■
Without spur ■
Height: ■
1000 mm without mortar �joint1015 mm with mortar joint �
Weight: 1000 kg ■
8700.42.61
250
Ø1500
Ø1800
Shaft ring
Grease separator Eco-FPI for ■
ground installationNS 7 – 10 �
Starch separator Eco-STP for ■
ground installationNS 2 �
Concrete in accordance with ■
DIN 4034 part 1Diameter: 1,500 mm ■
Starch 250 mm ■
With sealing ■
With socket ■
Without spur ■
Height: ■
250 mm without mortar joint �265 mm with mortar joint �
Weight: 480 kg ■
8700.42.23
500
Ø1500
Ø1800
Shaft ring
Grease separator Eco-FPI for ■
ground installationNS 7 – 10 �
Starch separator Eco-STP for ■
ground installationNS 2 �
Concrete in accordance with ■
DIN 4034 part 1Diameter: 1,500 mm ■
Starch 500 mm ■
With sealing ■
With socket ■
Without spur ■
Height: ■
500 mm without mortar joint �515 mm with mortar joint �
Weight: 931 kg ■
8700.42.33
Lattice grating
Grease separator Eco-FPI ■
NS 1 – 4 �Starch separator Eco-STP ■
NS 0.5 – 1 �
For buoyancy safeguard ■
Reinforcement of the base plate ■
Not upgradeable ■
0150.05.22
Lattice grating
Grease separator Eco-FPI ■
NS 7 – 10 �Starch separator Eco-STP ■
NS 2 �
For buoyancy safeguard ■
Reinforcement of the base plate ■
Not upgradeable ■
0150.05.23
100
Ø 350
Ø250 LW
Street cap Grease separator Eco-FPI with ■
direct suction
Manhole cover in accordance ■
with EN 124/DIN 1229Load class: A 15 ■
Cast iron frame and cover ■
Diameter: 300 mm ■
Clear diameter: 250 mm ■
Weight: 10 kg ■
5354.00.00
Page
Grease separator – mobile use
Polyethylene (LLDPE)
Eco-Mobil – Typ 0.3l 446
Eco-Mobil – Typ 0.5 447
Stainless steel (material grade 316)
Lipu-Mobil 448
Accessories 449
Grease separator – complete disposal
Oval shape polyethylene (HD-PE)
Eco-Jet-O basic design 450
Eco-Jet-OD extension stage 1 452
Hydrojet-OS extension stage 2 454
Hydrojet-OSE extension stage 2/disposal pumps 456
Hydrojet-OA extension stage 3 458
Hydrojet-OAE extension stage 3/disposal pumps 460
Curved shape polyethylene (HD-PE)
Eco-Jet-R basic design 462
Eco-Jet-RD extension stage 1 464
Hydrojet-RS extension stage 2 466
Hydrojet-RSE extension stage 2/disposal pumps 468
Hydrojet-RA extension stage 3 470
Hydrojet-RAE extension stage 3/disposal pumps 472
Accessories 474
Oval shape stainless steel (material grade 316)
Lipurex-O basic design 478
Lipurex-OD extension stage 1 480
Lipurat-OS extension stage 2 482
Lipurat-OSE extension stage 2/disposal pumps 484
Lipurat-OA extension stage 3 486
Lipurat-OAE extension stage 3/disposal pumps 488
Curved shape stainless steel (material grade 316)
Lipurex-R basic design 490
Lipurex-RD extension stage 1 492
Lipurat-RS extension stage 2 494
Lipurat-RSE extension stage 2/disposal pumps 496
Lipurat-RA extension stage 3 498
Lipurat-RAE extension stage 3/disposal pumps 500
Accessories 502
Divided shape polyethylene (HD-PE)
Eco-Jet-G basic design 506
Eco-Jet-GD extension stage 1 507
Accessories 508
Grease separator – partial disposal
Stainless steel (material grade 304)
Lipator – manual operation 510
Lipatomat – automatic control 512
Accessories 514
Grease separator – system solution
Suspension equipmentUpstream container mono 516
Upstream container duo 518
Accessories 520
Separator Grease separator Free-standing installation
Hinweis: @@ Dies ist eine Infobox-VORLAGEZubehör AAAAA ➔ Seite xxx.Zubehör BBBBB ➔ Seite xxx.
Infobox
445445
Page
Grease separator – mobile use
Polyethylene (LLDPE)
Eco-Mobil – Typ 0.3l 446
Eco-Mobil – Typ 0.5 447
Stainless steel (material grade 316)
Lipu-Mobil 448
Accessories 449
Grease separator – complete disposal
Oval shape polyethylene (HD-PE)
Eco-Jet-O basic design 450
Eco-Jet-OD extension stage 1 452
Hydrojet-OS extension stage 2 454
Hydrojet-OSE extension stage 2/disposal pumps 456
Hydrojet-OA extension stage 3 458
Hydrojet-OAE extension stage 3/disposal pumps 460
Curved shape polyethylene (HD-PE)
Eco-Jet-R basic design 462
Eco-Jet-RD extension stage 1 464
Hydrojet-RS extension stage 2 466
Hydrojet-RSE extension stage 2/disposal pumps 468
Hydrojet-RA extension stage 3 470
Hydrojet-RAE extension stage 3/disposal pumps 472
Accessories 474
Oval shape stainless steel (material grade 316)
Lipurex-O basic design 478
Lipurex-OD extension stage 1 480
Lipurat-OS extension stage 2 482
Lipurat-OSE extension stage 2/disposal pumps 484
Lipurat-OA extension stage 3 486
Lipurat-OAE extension stage 3/disposal pumps 488
Curved shape stainless steel (material grade 316)
Lipurex-R basic design 490
Lipurex-RD extension stage 1 492
Lipurat-RS extension stage 2 494
Lipurat-RSE extension stage 2/disposal pumps 496
Lipurat-RA extension stage 3 498
Lipurat-RAE extension stage 3/disposal pumps 500
Accessories 502
Divided shape polyethylene (HD-PE)
Eco-Jet-G basic design 506
Eco-Jet-GD extension stage 1 507
Accessories 508
Grease separator – partial disposal
Stainless steel (material grade 304)
Lipator – manual operation 510
Lipatomat – automatic control 512
Accessories 514
Grease separator – system solution
Suspension equipmentUpstream container mono 516
Upstream container duo 518
Accessories 520
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator for free-standing installation
Separator Grease separator Free-standing installation
Section contents
446
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – mobile usePolyethylene (LLDPE)
Separator Grease separator Free-standing installation
Eco-Mobil – type 0.3
Product information
Area of application: ■
Mobile food stalls �
Mobile dishwasher �
Occasional food preparation �
Application possible only with ■
Connection of 1 commercial dishwas- �
her with a minimum cleaning time of 1 minute, and a changeover time of ½ minute. (cycle time tz = 1½ min.)Water consumption of the commercial �
dishwasher after rinsing vs = 5 lIn addition to the dishwasher, connec- �
tion of a maximum of 1 pre-wash unit (short-term)
Polyethylene, material LLDPE ■
For mobile rinsing devices (no fixed ■
installation)With integrated sludge trap ■
For free-standing installation in frost- ■
protected areasPlug cap ■
Polyethylene �
Diameter: 350 mm �
System ACO Passavant ■
Official approval: Z-54.6-316 �
Ordering information
Nominal width
Capacity Weight Article No.
Sludge trap Grease storage Total capacity Empty Full[l] [l] [l] [kg] [kg]
DN 50 10 9 32 9,75 42 3700.01.00
Accessories
Designation compatible with Description Article No.
Ø62
91
Ø50
70
Inlet valve DN 50 Eco-Mobil ■
Muli-Mini ■
PVC ■
DN 50 ■
With sealing ring in accordance ■
with DIN 19538
0175.18.33
620
720
230
Rolls frame Eco-Mobil and Lipu-Mobil ■
Stainless steel, material grade ■
316With 4 transport casters ■
Weight: 19 kg ■
0153.20.81
inletDN 50
outletDN 50
585
385
250
DN
50
280
475
485
maintenance openingØ 350
double socket and socket plug DN 50
moulded-in grip
370
447
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – mobile usePolyethylene (LLDPE)
Separator Grease separator Free-standing installation
Eco-Mobil – type 0.5
Product information
Area of application: ■
Mobile food stalls �
Mobile dishwasher �
Occasional food preparation �
Application possible only with ■
Connection of 1 commercial dishwas- �
her with a minimum cleaning time of 1 minute, and a changeover time of ½ minute. (cycle time tz = 1½ min.)Water consumption of the commercial �
dishwasher after rinsing vs = 5 lIn addition to the dishwasher, connec- �
tion of a maximum of 1 pre-wash unit (short-term)
Polyethylene, material LLDPE ■
For mobile rinsing devices (no fixed ■
installation)With integrated sludge trap ■
For free-standing installation in frost- ■
protected areasPlug cap ■
Polyethylene �
Diameter: 450 mm �
System ACO Passavant ■
Official approval @@ �
Ordering information
Nominal width
Capacity Weight Article No.
Sludge trap Grease storage Total capacity Empty Full[l] [l] [l] [kg] [kg]
DN 70/100 50 20 100 19 119 3700.02.00
Accessories
Designation compatible with Description Article No.
Ø12
0Ø
110
15
Ø13
380
176
140
10 Inlet valve DN 100Waste water lifting plants ■
Polyethylene grease separator ■
Polyethylene starch separator ■
PVC ■
Construction length: 176 mm ■
Weight: 2.75 kg ■
0175.13.84
DN
70
855
OutletDN ...
InletDN ...
550
DN
100
620
500
870
Maintenance openingDN 450
785
(Con
tain
er)
448
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – mobile useStainless steel (material grade 316)
Separator Grease separator Free-standing installation
Lipu-Mobil
Product information
Area of application: ■
Mobile food stalls �
Mobile dishwasher �
Application possible only with ■
Connection of 1 commercial dishwas- �
her with a minimum cleaning time of 1 minute, and a changeover time of ½ minute. (cycle time tz = 1½ min.)Water consumption of the commercial �
dishwasher after rinsing vs = 5 lIn addition to the dishwasher, connec- �
tion of a maximum of 1 pre-wash unit (short-term)
Stainless steel, material grade 316 ■
For mobile rinsing devices ■
With integrated sludge trap ■
For free-standing installation in frost- ■
protected areasCover with clamping ring closure ■
Diameter: 350 mm �
System ACO Passavant ■
Official approval Z-54.6-316 �
Ordering information
Nominal width
Capacity Weight Article No.
Sludge trap Grease storage Total capacity Empty Full[l] [l] [l] [kg] [kg]
DN 50 10 9 32 20 52 7301.30.40
inletDN 50
outletDN 50
585
385
250
DN
50
280
475
430
maintenance opening Ø 300
370
449
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – mobile useStainless steel (material grade 316)
Separator Grease separator Free-standing installation
Accessories
Designation compatible with Description Article No.
620
720
230
Rolls frame Eco-Mobil and Lipu-Mobil ■
Stainless steel, material grade ■
316With 4 transport casters ■
Weight: 19 kg ■
0153.20.81
450
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Eco-Jet-O basic design
Product information
ACO product advantages
Proven stability: 25 years (minimum ■
service life)Upgradeable to extension stage 1-3 ■
Minimization of disposal and mainte- ■
nance costs via economical gradation of the nominal sizeSmall installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100
For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Suction and disposal sump with de- ■
watering socket R 1“Odour-tight maintenance opening, ■
diameter: 450 mmInlet and drainage connections in accor- ■
dance with EN 877System ACO Passavant ■
Official approval Z-54.1-414 �
Ausbaustufe: Basisausführung B
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
451
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap Grease sto-rage
Total capa-city
Empty Full
[l] [l] [l] [kg] [kg]NS 1 DN 100 106 100 320 62 382 3551.34.00NS 2 DN 100 210 100 440 70 510 3552.34.00NS 3 DN 100 300 150 630 80 710 3553.34.00NS 4 DN 100 400 200 830 95 925 3554.34.00
NS 5,5 DN 150 725 360 1430 170 1600 3555.34.00NS 7 DN 150 800 400 1600 187 1787 3557.34.00
NS 8,5 DN 150 940 475 1900 208 2108 3558.34.00NS 10 DN 150 1000 520 2000 220 2220 3560.34.00
Dimensions
H 2
L 1
H 1
ØD
H 4
maintenanceopening
B 1
connection for heating rod(optional) *
ventilationDN 100
L 2
inletDN ... outlet
DN ...
B 2
sight glass withwiper(optional) *
H 3
filling device with ball valve and pressure regulator (optional) *
min
500
displayed:NS4, operating side right,operating side left would show all components (filling device, sight glass) positioned mirror-inverted to axis.
* not included in the scope of delivery
Nominal size
Dimensions
L1 L2 H1 H2 H3 H4 B1 B2 D[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 1 1100 1300 830 760 1480 1300 700 770 110NS 2 1100 1300 1055 985 1680 1500 700 770 110NS 3 1450 1650 1055 985 1680 1500 700 770 110NS 4 1760 2000 1055 985 1680 1500 700 770 110
NS 5,5 1760 2000 1250 1180 1880 1700 950 1020 160NS 7 1960 2200 1250 1180 1880 1700 950 1020 160
NS 8,5 2250 2485 1250 1180 1880 1700 950 1020 160NS 10 2450 2690 1250 1180 1880 1700 950 1020 160
452
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Eco-Jet-OD extension stage 1
Product information
ACO product advantages
Proven stability: 25 years (minimum ■
service life)Direct emptying without odour build-up ■
Upgradeable to extension stages 2 ■
and 3Minimization of disposal and mainte- ■
nance costs via economical gradation of the nominal sizeSmall installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100
For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1“Odour-tight maintenance opening, ■
diameter: 450 mmInlet and drainage connections in accor- ■
dance with EN 877System ACO Passavant ■
Official approval Z-54.1-414 �
Ausbaustufe 1
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
453
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap Grease sto-rage
Total capa-city
Empty Full
[l] [l] [l] [kg] [kg]NS 1 DN 100 106 100 320 68 388 3551.64.00NS 2 DN 100 210 100 440 75 515 3552.64.00NS 3 DN 100 300 150 630 85 715 3553.64.00NS 4 DN 100 400 200 830 100 930 3554.64.00
NS 5,5 DN 150 725 360 1430 175 1605 3555.64.00NS 7 DN 150 800 400 1600 193 1793 3557.64.00
NS 8,5 DN 150 940 475 1900 214 2114 3558.64.00NS 10 DN 150 1000 520 2000 226 2226 3560.64.00
Dimensions
B 1
B 2
sight glasswith wiper(optional) *
H 3
filling device with solenoid valveand pressure regulator (optional) *
min
500
H 2
L 1
H 1
Ø D
H 4
maintenanceopening
connection for heating rod(optional) *
ventilationDN 100
L 2
inletDN ... outlet
DN ...
disposal connectionwith Storz-B-couplingR 2 ½, DIN 14308
H 5
displayed:NS4, operating side right,Operating side left would show all components (filling device, sight glass) positioned mirror-inverted to axis.
* not included in the scope of delivery
Nominal size
Dimensions
L1 L2 H1 H2 H3 H4 H5 B1 B2 D[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 1 1100 1300 830 760 1480 1300 1350 700 770 110NS 2 1100 1300 1055 985 1680 1500 1550 700 770 110NS 3 1450 1650 1055 985 1680 1500 1550 700 770 110NS 4 1760 2000 1055 985 1680 1500 1550 700 770 110
NS 5,5 1760 2000 1250 1180 1880 1700 1750 950 1020 160NS 7 1960 2200 1250 1180 1880 1700 1750 950 1020 160
NS 8,5 2250 2485 1250 1180 1880 1700 1750 950 1020 160NS 10 2450 2690 1250 1180 1880 1700 1750 950 1020 160
454
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Hydrojet-OS extension stage 2
Product information
ACO product advantages
Proven stability: 25 years (minimum ■
service life)Disposal, cleaning and filling without ■
odour build-upHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionUpgradeable to extension stage 3 ■
Fitting with a disposal pump possible ■
Minimization of disposal and mainte- ■
nance costs via economical gradation of the nominal sizeSmall installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1“Inspection window with wiper ■
Manual operation of the high-pressure ■
interior cleaning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Odour-tight maintenance opening, ■
diameter: 450 mmFilling unit with ball valve (connection ■
R ¾“) for manual re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/3.9 kWSystem ACO Passavant ■
Official approval Z-54.1-414 �
Ausbaustufe 2
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
455
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Total ca-pacity
Empty Full Right Left
[l] [l] [l] [kg] [kg]NS 1 DN 100 106 100 320 95 415 3571.74.41 3571.74.31NS 2 DN 100 210 100 440 100 540 3572.74.41 3572.74.31NS 3 DN 100 300 150 630 120 750 3573.74.41 3573.74.31NS 4 DN 100 400 200 830 135 965 3574.74.41 3574.74.31
NS 5,5 DN 150 725 360 1430 206 1636 3575.74.41 3575.74.31NS 7 DN 150 800 400 1600 223 1823 3577.74.41 3577.74.31
NS 8,5 DN 150 940 475 1900 243 2143 3578.74.41 3578.74.31NS 10 DN 150 1000 520 2000 255 2255 3580.74.41 3580.74.31
Dimensions
filling device with solenoid valve and pressure regulator
Ø D
disposal connection withStorz-B-couplingR 2 ½, DIN 14308
maintenance opening
inletDN ...
B 1
B 2
L 2
high-pressure spray head
connection for heating rod(optional) *
ventilationDN 100
high-pressurepump
min
500
displayed:NS4, operating side right,operating side left would show all components (disposal connection, filling device, sight glass) positioned mirror-inverted to axis.
* not included in the scope of delivery
L 4
H 1
H 4
outletDN ...
H 2
sight glass with wiper
H 3
H 5
L 1
L 3
No-minal size
Dimensions
L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 D[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 1 1100 1300 1400 300 830 760 1480 1300 1500 700 770 110NS 2 1100 1300 1400 300 1055 985 1680 1500 1700 700 770 110NS 3 1450 1650 1750 300 1055 985 1680 1500 1700 700 770 110NS 4 1760 2000 2060 300 1055 985 1680 1500 1700 700 770 110
NS 5,5 1760 2000 2060 300 1250 1180 1880 1700 1900 950 1020 160NS 7 1960 2200 2260 300 1250 1180 1880 1700 1900 950 1020 160
NS 8,5 2250 2485 2550 300 1250 1180 1880 1700 1900 950 1020 160NS 10 2450 2690 2750 300 1250 1180 1880 1700 1900 950 1020 160
456
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Hydrojet-OSE extension stage 2
Product information
ACO product advantages
Proven stability: 25 years (minimum ■
service life)Disposal, cleaning and filling without ■
odour build-upHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionUpgradeable to extension stage 3 ■
Minimization of disposal and mainte- ■
nance costs via economical gradation of the nominal sizeSmall installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“
Suction and disposal sump with de- ■
watering socket R 1“Inspection window with wiper ■
Manual operation of the high-pressure ■
interior cleaning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Standard control with centralised fault ■
signalDisposal pump with free flow impeller ■
Motor rating: 3.0 kW/2850 U/min �
Delivery performance: 20 m³/h with �
1 bar medium delivery headStop valve in front of disposal pump ■
Odour-tight maintenance opening, ■
diameter: 450 mmFilling unit with ball valve (connection ■
R ¾“) for manual re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/6.9 kWSystem ACO Passavant ■
Official approval Z-54.1-414 �
Ausbaustufe 2
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungInkl. Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
457
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Total ca-pacity
Empty Full Right Left
[l] [l] [l] [kg] [kg]NS 1 DN 100 106 100 320 177 497 3571.84.41 3571.84.31NS 2 DN 100 210 100 440 182 622 3572.84.41 3572.84.31NS 3 DN 100 300 150 630 194 824 3573.84.41 3573.84.31NS 4 DN 100 400 200 830 210 1040 3574.84.41 3574.84.31
NS 5,5 DN 150 725 360 1430 286 1716 3575.84.41 3575.84.31NS 7 DN 150 800 400 1600 305 1905 3577.84.41 3577.84.31
NS 8,5 DN 150 940 475 1900 325 2225 3578.84.41 3578.84.31NS 10 DN 150 1000 520 2000 337 2337 3580.84.41 3580.84.31
Dimensions
switch box
filling device with solenoid valve and pressure regulator
outletDN ...
H 5
H 3
H 2
L 1L 4
L 3
H 1
Ø D
disposal connection withStorz-B-couplingR 2 ½, DIN 14308
H 4
maintenanceopening
inletDN ...
disposalpump
Shut-offvalve
B 1
B 2
L 2
high-pressure spray head
B 3
B 4
connectionfor heating rod(optional) *
sight glasswithwiper
ventilationDN 100
high-pressurepump
min
500
displayed:NS4, operating side right,operating side left would show all components (disposal connection, filling device, sight glass, shut-off valve, switch box) positioned mirror-inverted to axis.
* not included in the scope of delivery
No-minal size
Dimensions
L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 B3 B4 D[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 1 1100 1300 1800 700 830 760 1480 1300 1500 700 770 500 930 110NS 2 1100 1300 1800 700 1055 985 1680 1500 1700 700 770 500 930 110NS 3 1450 1650 2150 700 1055 985 1680 1500 1700 700 770 500 930 110NS 4 1760 2000 2460 700 1055 985 1680 1500 1700 700 770 500 930 110
NS 5,5 1760 2000 2460 700 1250 1180 1880 1700 1900 950 1020 625 1180 160NS 7 1960 2200 2660 700 1250 1180 1880 1700 1900 950 1020 625 1180 160
NS 8,5 2250 2485 2950 700 1250 1180 1880 1700 1900 950 1020 625 1180 160NS 10 2450 2690 3150 700 1250 1180 1880 1700 1900 950 1020 625 1180 160
458
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Hydrojet-OA extension stage 3
Product information
ACO product advantages
Proven stability: 25 years (minimum ■
service life)Disposal, cleaning and filling without ■
odour build-upUpgrade with disposal pump possible ■
Pre- and post- cleaning times can be ■
set individuallyHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionFitting with a disposal pump possible ■
Minimization of disposal and mainte- ■
nance costs via economical gradation of the nominal sizeSmall installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1“Inspection window with wiper ■
Automatic high-pressure interior clea- ■
ning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Standard control with centralised fault ■
signalOdour-tight maintenance opening, ■
diameter: 450 mmFilling unit with solenoid valve (connec- ■
tion R ¾“) for automatic re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/3.9 kWSystem ACO Passavant ■
Official approval Z-54.1-414 �
Ausbaustufe 3
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
459
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Total ca-pacity
Empty Full Right Left
[l] [l] [l] [kg] [kg]NS 1 DN 100 106 100 320 100 420 3551.74.42 3551.74.32NS 2 DN 100 210 100 440 105 545 3552.74.42 3552.74.32NS 3 DN 100 300 150 630 120 750 3553.74.42 3553.74.32NS 4 DN 100 400 200 830 135 965 3554.74.42 3554.74.32
NS 5,5 DN 150 725 360 1430 210 1640 3555.74.42 3555.74.32NS 7 DN 150 800 400 1600 226 1826 3557.74.42 3557.74.32
NS 8,5 DN 150 940 475 1900 247 2147 3558.74.42 3558.74.32NS 10 DN 150 1000 520 2000 259 2259 3560.74.42 3560.74.32
Dimensions
switch box
filling device with solenoid valve and pressure regulator
outletDN ...
H 3
H 5
H 2
L 1L 4
L 3
H 1
Ø D
disposal connection with Storz-B-couplingR 2 ½, DIN 14308
H 4
maintenanceopening
inletDN ...
B 1
B 2
L 2
high-pressure spray head
B 3
connection for heating rod(optional) *
sight glass with wiper
ventilationDN 100
high-pressure pump
min
500
displayed:NS4, operating side right,operating side left would show all components (disposal connection, filling device, sight glass, switch box) positioned mirror-inverted to axis.
* not included in the scope of delivery
No-minal size
Dimensions
L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 B3 D[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 1 1100 1300 1400 300 830 760 1510 1300 1500 700 770 800 110NS 2 1100 1300 1400 300 1055 985 1710 1500 1700 700 770 800 110NS 3 1450 1650 1750 300 1055 985 1710 1500 1700 700 770 800 110NS 4 1760 2000 2060 300 1055 985 1710 1500 1700 700 770 800 110
NS 5,5 1760 2000 2060 300 1250 1180 1910 1700 1900 950 1020 1050 160NS 7 1960 2200 2260 300 1250 1180 1910 1700 1900 950 1020 1050 160
NS 8,5 2250 2485 2550 300 1250 1180 1910 1700 1900 950 1020 1050 160NS 10 2450 2690 2750 300 1250 1180 1910 1700 1900 950 1020 1050 160
460
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Hydrojet-OAE extension stage 3
Product information
ACO product advantages
Proven stability: 25 years (minimum ■
service life)Disposal, cleaning and filling without ■
odour build-upPre- and post- cleaning times can be ■
set individuallyHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionMinimization of disposal and mainte- ■
nance costs via economical gradation of the nominal sizeSmall installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“
Suction and disposal sump with de- ■
watering socket R 1“Inspection window with wiper ■
Automatic high-pressure interior clea- ■
ning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Standard control with centralised fault ■
signalDisposal pump with free flow impeller ■
Motor rating: 3.0 kW/2850 U/min �
Delivery performance: 20 m³/h with �
1 bar medium delivery headStop valve in front of disposal pump ■
Odour-tight maintenance opening, ■
diameter: 450 mmFilling unit with solenoid valve (connec- ■
tion R ¾“) for automatic re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/6.9 kWSystem ACO Passavant ■
Official approval Z-54.1-414 �
Ausbaustufe 3
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Inkl. Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
461
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Total ca-pacity
Empty Full Right Left
[l] [l] [l] [kg] [kg]NS 1 DN 100 106 100 320 177 497 3551.84.42 3551.84.32NS 2 DN 100 210 100 440 182 622 3552.84.42 3552.84.32NS 3 DN 100 300 150 630 194 824 3553.84.42 3553.84.32NS 4 DN 100 400 200 830 210 1040 3554.84.42 3554.84.32
NS 5,5 DN 150 725 360 1430 286 1716 3555.84.42 3555.84.32NS 7 DN 150 800 400 1600 305 1905 3557.84.42 3557.84.32
NS 8,5 DN 150 940 475 1900 325 2225 3558.84.42 3558.84.32NS 10 DN 150 1000 520 2000 337 2337 3560.84.42 3560.84.32
Dimensions
switch box
filling device with solenoid valve and pressure regulator
outletDN...
H 3
H 5
H 2
L 1L 4
L 3
H 1
Ø D
disposal connection with Storz-B-coupling R 2 ½, DIN 14308
H 4
maintenanceopening
inletDN ...
disposal pump
shut-off valve
B 1
B 2
L 2
high-pressure spray head
B 3
B 4
connection for heating rod (optional) *
sight glass with wiper
ventilationDN100
high-pressure pump
min
500
displayed:NS4, operating side right operating side left would show all components (disposal connection, filling device, sight glass, shut-off valve, switch box) positioned mirror-inverted to axis.
* not included in the scope of delivery
No-minal size
Dimensions
L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 B3 B4 D[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 1 1100 1300 1800 700 830 760 1480 1300 1500 700 770 500 930 110NS 2 1100 1300 1800 700 1055 985 1680 1500 1700 700 770 500 930 110NS 3 1450 1650 2150 700 1055 985 1680 1500 1700 700 770 500 930 110NS 4 1760 2000 2460 700 1055 985 1680 1500 1700 700 770 500 930 110
NS 5,5 1760 2000 2460 700 1250 1180 1880 1700 1900 950 1020 625 1180 160NS 7 1960 2200 2660 700 1250 1180 1880 1700 1900 950 1020 625 1180 160
NS 8,5 2250 2485 2950 700 1250 1180 1880 1700 1900 950 1020 625 1180 160NS 10 2450 2690 3150 700 1250 1180 1880 1700 1900 950 1020 625 1180 160
462
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Eco-Jet-R basic design
Product information
ACO product advantages
Easy to transport and install via single ■
component installationUpgradeable to extension stage 1-3 ■
Small installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost free
With integrated sludge trap ■
Operator side: right/left ■
Suction and disposal sump with de- ■
watering socket R 1½“Odour-tight maintenance opening, ■
diameter: 350 mmInlet and drainage connections in accor- ■
dance with EN 877System ACO Passavant ■
Official approval Z-54.6-320 �
Ausbaustufe: Basisausführung B
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
463
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap Grease storage
Total capacity
Empty Full Hea-viest
compo-nents
[l] [l] [l] [kg] [kg] [kg]NS 2 DN 100 290 120 680 119 799 48 3502.32.30NS 4 DN 100 500 160 890 134 1024 55 3504.32.30NS 7 DN 150 830 400 2120 301 2521 112 3507.32.30
NS 10 DN 150 1150 400 2450 311 2761 116 3510.32.30NS 15 DN 200 1950 800 3610 357 3967 134 3515.32.30NS 20 DN 200 2440 800 4070 358 4428 134 3520.32.30
Dimensions
maintenanceopening ventilation
DN 100
inletDN ... outlet
DN ...
connection for heating rod(optional) *H
1
H 2
H 4
Ø D 1
L 1
Ø D
L 3
L 2
H 3
min
500
filling device with ball valve and pressure regulator (optional) *
sight glasswith wiper(optional) *
displayed:NS7, operating side right,operating side left would show all components(sight glass) positioned mirror-inverted to axis.
* not included in the scope of delivery
Z
Nominal size
Dimensions
L1 L2 H1 H2 H3 H4 D D1 Z/n[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 2 1255 60 975 905 1320 1520 110 1150 795/2NS 4 1255 60 1240 1170 1580 1780 110 1150 820/2NS 7 1820 60 1430 1330 1880 2080 160 1660 785/3
NS 10 1820 60 1600 1500 2050 2250 160 1660 785/3NS 15 2130 60 1765 1665 2200 2400 200 1920 880/3NS 20 2130 60 1955 1855 2400 2600 200 1920 880/3
464
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Eco-Jet-RD extension stage 1
Product information
ACO product advantages
Easy to transport and install via single ■
component installationDirect emptying without odour build-up ■
Upgradeable to extension stages 2 ■
and 3Small installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost free
With integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1½“Odour-tight maintenance opening, ■
diameter: 350 mmInlet and drainage connections in accor- ■
dance with EN 877System ACO Passavant ■
Official approval Z-54.6-320 �
Ausbaustufe 1
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
465
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap Grease storage
Totalcapacity
Empty Full Hea-viest
compo-nents
[l] [l] [l] [kg] [kg] [kg]NS 2 DN 100 290 120 680 123 803 48 3502.62.30NS 4 DN 100 500 160 890 139 1029 55 3504.62.30NS 7 DN 150 830 400 2120 310 2430 112 3507.62.30
NS 10 DN 150 1150 400 2450 321 2771 116 3510.62.30NS 15 DN 200 1950 800 3610 358 3968 134 3515.62.30NS 20 DN 200 2440 800 4070 360 4430 134 3520.62.30
Dimensions
disposal connection with Storz-B- coupling R 2 ½, DIN 14308
maintenanceopening ventilation
DN 100
inlet DN... outlet
DN...
connectionfor heating rod(optional) *H
1
H 2 H
4H
5
Ø D 1
Ø D
L 3
H 3
min
500
sight glass with wiper(optional) *
displayed:NS7, operating side right operating side left would show all components(disposal connection, sight glass) positioned mirror-inverted to axis
*not included in the scope of delivery
filling device with ball valve and pressure regulator (optional) *
L 1
L 2
Z
Nomi-nal size
Dimensions
L1 L2 L3 H1 H2 H3 H4 H5 D D1 Z/n[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 2 1255 60 170 975 905 1320 1370 1520 110 1150 795/2NS 4 1255 60 170 1240 1170 1580 1630 1780 110 1150 820/2NS 7 1820 60 170 1430 1330 1880 1930 2080 160 1660 785/3
NS 10 1820 60 170 1600 1500 2050 2100 2250 160 1660 785/3NS 15 2130 60 170 1765 1665 2200 2250 2400 200 1920 880/3NS 20 2130 60 170 1955 1855 2400 2450 2600 200 1920 880/3
466
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Hydrojet-RS extension stage 2
Product information
ACO product advantages
Easy to transport and install via single ■
component installationDisposal, cleaning and filling without ■
odour build-upHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionUpgradeable to extension stage 3 ■
Fitting with a disposal pump possible ■
Small installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1½“Inspection window with wiper ■
Manual operation of the high-pressure ■
interior cleaning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Odour-tight maintenance opening, ■
diameter: 350 mmFilling unit with ball valve (connection ■
R ¾“) for manual re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/3.9 kWSystem ACO Passavant ■
Official approval Z-54.6-320 �
Ausbaustufe 2
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
467
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Totalcapacity
Empty Full Hea-viestcom-pon-ents
Right Left
[l] [l] [l] [kg] [kg] [kg]NS 2 DN 100 290 120 680 156 836 48 3502.73.41 3502.73.31NS 4 DN 100 500 160 890 172 1062 55 3504.73.41 3504.73.31NS 7 DN 150 830 400 2120 344 2464 112 3507.73.41 3507.73.31
NS 10 DN 150 1150 400 2450 355 2805 116 3510.73.41 3510.73.31NS 15 DN 200 1950 800 3610 391 4001 134 3515.73.41 3515.73.31NS 20 DN 200 2440 800 4070 392 4462 134 3520.73.41 3520.73.31
Dimensions
filling device with ball valve and pressure regulator
disposal connection with Storz-B- coupling R 2 ½, DIN 14308
high-pressurespray head
maintenanceopening
ventilationDN 100
inlet DN ... outlet
DN ...
connection for heating rod(optional) *
sight glass with wipe
H 1
H 2
H 4
H 5
Ø D 1
Ø D
L 3
H 3
min
500
L 4 high-pressurepump
displayed:NS7, operating side right operating side left would show all components(disposal connection, sight glass, high-pressure pump) positioned mirror-inverted to axis.
* not included in the scope of delivery
L 1
L 2
Z
No-minal size
Dimensions
L1 L2 L3 L4 H1 H2 H3 H4 H5 D D1 Z/n[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 2 1255 60 170 260 975 905 1320 1370 1520 110 1150 795/2NS 4 1255 60 170 260 1240 1170 1580 1630 1780 110 1150 820/2NS 7 1820 60 170 260 1430 1330 1880 1930 2080 160 1660 785/3
NS 10 1820 60 170 260 1600 1500 2050 2100 2250 160 1660 785/3NS 15 2130 60 170 260 1765 1665 2200 2250 2400 200 1920 880/3NS 20 2130 60 170 260 1955 1855 2400 2450 2600 200 1920 880/3
468
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Hydrojet-RSE extension stage 2
Product information
ACO product advantages
Easy to transport and install via single ■
component installationDisposal, cleaning and filling without ■
odour build-upHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionUpgradeable to extension stage 3 ■
Small installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1½“
Inspection window with wiper ■
Manual operation of the high-pressure ■
interior cleaning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Standard control with centralised fault ■
signalDisposal pump with free flow impeller ■
Motor rating: 3.0 kW/2850 U/min �
Delivery performance: 20 m³/h with �
1 bar medium delivery headStop valve in front of disposal pump ■
Odour-tight maintenance opening, ■
diameter: 350 mmFilling unit with ball valve (connection ■
R ¾“) for manual re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/6.9 kWSystem ACO Passavant ■
Official approval Z-54.6-320 �
Ausbaustufe 2
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungInkl. Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
469
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Totalcapacity
Empty Full Hea-viestcom-pon-ents
Right Left
[l] [l] [l] [kg] [kg] [kg]NS 2 DN 100 290 120 680 189 869 48 3502.73.81 3502.73.71NS 4 DN 100 500 160 890 205 1095 55 3504.73.81 3504.73.71NS 7 DN 150 830 400 2120 377 2497 112 3507.73.81 3507.73.71
NS 10 DN 150 1150 400 2450 388 2838 116 3510.73.81 3510.73.71NS 15 DN 200 1950 800 3610 424 4034 134 3515.73.81 3515.73.71NS 20 DN 200 2440 800 4070 437 4507 134 3520.73.81 3520.73.71
Dimensions
Z
disposal connection with Storz-B- coupling R 2 ½, DIN 14308
high-pressurespray head
maintenanceopening
disposal pump
stop valve
ventilation DN 100
inlet DN ... Outlet
DN ...
connection for heating rod(optional) *
sight glasswith wipeswitch box
H 1
H 2
H 4
H 5
Ø D 1 L 4
Ø D
L 3
H 3
min
500
filling device with ball valve and pressure regulator
L 6 high-pressure pump
L 1
L 2
L 5
displayed:NS7, operating side right,operating side left would show all component(disposal connection, switch box, sight glass, high-pressure pump) positioned mirror-inverted to axis.
* not included in the scope of delivery
No-minal size
Dimensions
L1 L2 L3 L4 L5 L6 H1 H2 H3 H4 H5 D D1 Z/n[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 2 1255 60 150 520 65 260 975 905 1320 1370 1520 110 1150 795/2NS 4 1255 60 150 520 65 260 1240 1170 1580 1630 1780 110 1150 820/2NS 7 1820 60 150 520 65 260 1430 1330 1880 1930 2080 160 1660 785/3
NS 10 1820 60 150 520 65 260 1600 1500 2050 2100 2250 160 1660 785/3NS 15 2130 60 150 520 65 260 1765 1665 2200 2250 2400 200 1920 880/3NS 20 2130 60 150 520 65 260 1955 1855 2400 2450 2600 200 1920 880/3
470
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Hydrojet-RA extension stage 3
Product information
ACO product advantages
Easy to transport and install via single ■
component installationDisposal, cleaning and filling without ■
odour build-upPre- and post- cleaning times can be ■
set individuallyHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionFitting with a disposal pump possible ■
Small installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1½“Inspection window with wiper ■
Automatic high-pressure interior clea- ■
ning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Standard control with centralised fault ■
signalOdour-tight maintenance opening, ■
diameter: 350 mmFilling unit with solenoid valve (connec- ■
tion R ¾“) for automatic re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/3.9 kWSystem ACO Passavant ■
Official approval Z-54.6-320 �
Ausbaustufe 3
Features of basic design:
Disposal and cleaning via covers
Odour build-up during disposal andcleaning
Features of extension stage 1:
Connection for direct suction
Odour build-up during cleaning
Features of extension stage 2:
Connection for direct suction
High-pressure cleaning with
manual operationOptionally disposal pump available
No odour build-up
Features of extension stage 3:
Connection for direct suction
Fully automatic operation
No odour build-up
471
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Total ca-pacity
Empty Full Hea-viestcom-pon-ents
Right Left
[l] [l] [l] [kg] [kg] [kg]NS 2 DN 100 290 120 680 165 845 48 3502.73.42 3502.73.32NS 4 DN 100 500 160 890 181 1071 55 3504.73.42 3504.73.32NS 7 DN 150 830 400 2120 353 2473 112 3507.73.42 3507.73.32
NS 10 DN 150 1150 400 2450 364 2814 116 3510.73.42 3510.73.32NS 15 DN 200 1950 800 3610 401 4011 134 3515.73.42 3515.73.32NS 20 DN 200 2440 800 4070 401 4471 134 3520.73.42 3520.73.32
Dimensions
L 5 high-pressurepump
L 1
L 2
L 4
disposal connection with Storz-B- coupling R 2 ½, DIN 14308
filling device with solenoid valve and pressure regulator
high-pressurespray head
maintenanceopening
ventilation DN 100
inletDN ... outlet
DN ...
connection for heating rod (optional)
sight glass with wipeswitch box
H 1
H 2 H
4H
5
Ø D 1
Ø D
L 3
H 3
min
500
displayed:NS7, operating side right operating side left would show all components(disposal connection, switch box, sight glass, high-pressure pump) positioned mirror-inverted to axis.
* not included in the scope of delivery
Z
No-minal size
Dimensions
L1 L2 L3 L4 L5 H1 H2 H3 H4 H5 D D1 Z/n[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 2 1255 60 170 65 260 975 905 1320 1370 1570 110 1150 795/2NS 4 1255 60 170 65 260 1240 1170 1580 1630 1830 110 1150 820/2NS 7 1820 60 170 65 260 1430 1330 1880 1930 2130 160 1660 785/3
NS 10 1820 60 170 65 260 1600 1500 2050 2100 2300 160 1660 785/3NS 15 2130 60 170 65 260 1765 1665 2200 2250 2450 200 1920 880/3NS 20 2130 60 170 65 260 1955 1855 2400 2450 2650 200 1920 880/3
472
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Hydrojet-RAE extension stage 3
Product information
ACO product advantages
Easy to transport and install via single ■
component installationDisposal, cleaning and filling without ■
odour build-upPre- and post- cleaning times can be ■
set individuallyHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionSmall installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1½“
Inspection window with wiper ■
Automatic high-pressure interior clea- ■
ning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Standard control with centralised fault ■
signalDisposal pump with free flow impeller ■
Motor rating: 3.0 kW/2850 U/min �
Delivery performance: 20 m³/h with �
1 bar medium delivery headStop valve in front of disposal pump ■
Odour-tight maintenance opening, ■
diameter: 350 mmFilling unit with solenoid valve (connec- ■
tion R ¾“) for automatic re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/6.9 kWSystem ACO Passavant ■
Official approval Z-54.6-320 �
Ausbaustufe 3
Features of basic design:
Disposal and cleaning via covers
Odour build-up during disposal andcleaning
Features of extension stage 1:
Connection for direct suction
Odour build-up during cleaning
Features of extension stage 2:
Connection for direct suction
High-pressure cleaning with
manual operationOptionally disposal pump available
No odour build-up
Features of extension stage 3:
Connection for direct suction
Fully automatic operation
With disposal pump and
remote control availableNo odour build-up
473
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Total ca-pacity
Empty Full Hea-viestcom-pon-ents
Right Left
[l] [l] [l] [kg] [kg] [kg]NS 2 DN 100 290 120 680 194 874 48 3502.73.82 3502.73.72NS 4 DN 100 500 160 890 210 1100 55 3504.73.82 3504.73.72NS 7 DN 150 830 400 2120 382 2502 112 3507.73.82 3507.73.72
NS 10 DN 150 1150 400 2450 393 2843 116 3510.73.82 3510.73.72NS 15 DN 200 1950 800 3610 442 4052 134 3515.73.82 3515.73.72NS 20 DN 200 2440 800 4070 443 4513 134 3520.73.82 3520.73.72
Dimensions
disposal connection with Storz-B-coupling R 2½, DIN 14308
filling device withsolenoid valveand pressure regulator
high-pressurespray head
maintenanceopening
disposal pump
stop valve
ventilationDN 100
inletDN ... outlet
DN ...
connection for heating rod (optional)
sight glasswith wiperswitch box
H 1
H 2
H 4
H 5
Ø D 1
L1
L 4
Ø D
L 3
H 3
min
500
displayed:NS7, operating side right operating side left would show all components(disposal connection, switch box, sight glass, high-pressure pump) positioned mirror-inverted to axis.
* not included in the scope of delivery
L 6 high-pressure pump
L 2
L 5
Z
No-minal size
Dimensions
L1 L2 L3 L4 L5 L6 H1 H2 H3 H4 H5 D D1 Z/n[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 2 1255 60 150 520 65 260 975 905 1320 1370 1570 110 1150 795/2NS 4 1255 60 150 520 65 260 1240 1170 1580 1630 1830 110 1150 820/2NS 7 1820 60 150 520 65 260 1430 1330 1880 1930 2130 160 1660 785/3
NS 10 1820 60 150 520 65 260 1600 1500 2050 2100 2300 160 1660 785/3NS 15 2130 60 150 520 65 260 1765 1665 2200 2250 2450 200 1920 880/3NS 20 2130 60 150 520 65 260 1955 1855 2400 2450 2650 200 1920 880/3
474
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Accessories
Designation compatible with Description Article No.
li. Ø455
525
68
221
625
Sampling pot DN 100
Grease separator Eco-Jet/ ■
HydrojetNS 1 – 4 �
Starch separator Fapurat-PE ■
NS 0.5 – 1 �
For installation in horizontal pi- ■
pes DN 100 after the separator plantCurved shape, with ■
Socket seal (material SBR) �on the inlet and pipe spigot on the drainOdour tight maintenance �opening DN 450
Weight: 7 kg ■
3300.09.11
li. Ø455
525
86
245
645
Sampling pot DN 150
Grease separator Eco-Jet/ ■
HydrojetNS 5.5 – 10 �
Starch separator Fapurat-PE ■
NS 2 �
For installation in horizontal pi- ■
pes DN 150 after the separator plantCurved shape, with ■
Socket seal (material SBR) �on the inlet and pipe spigot on the drainOdour tight maintenance �opening DN 450
Weight: 7 kg ■
3300.09.21
li. Ø 455
525
106
269
655
Sampling pot DN 200Grease separator Eco-Jet/ ■
HydrojetNS 15 – 20 �
For installation in horizontal pi- ■
pes DN 200 after the separator plantCurved shape, with ■
Socket seal (material SBR) �on the inlet and pipe spigot on the drainOdour tight maintenance �opening DN 450
Weight: 7 kg ■
3300.09.31
li. Ø455
525
221
55544370
Sampling pot DN 100
Grease separator Eco-Jet/ ■
HydrojetNS 1 – 4 �
Starch separator Fapurat-PE ■
NS 0.5 – 1 �
For installation in vertical pipes ■
DN 100 after the separator plantCurved shape, with ■
Socket seal (material SBR) �on the inlet and pipe spigot on the drainOdour tight maintenance �opening DN 450
Weight: 7 kg ■
3300.10.11
li. Ø 455
525
245
555
415
90
Sampling pot DN 150
Grease separator Eco-Jet/ ■
HydrojetNS 5.5 – 10 �
Starch separator Fapurat-PE ■
NS 2 �
For installation in vertical pipes ■
DN 150 after the separator plantCurved shape, with ■
Socket seal (material SBR) �on the inlet and pipe spigot on the drainOdour tight maintenance �opening DN 450
Weight: 7 kg ■
3300.10.21
li. Ø 455
525
265
555
403
100
Sampling pot DN 200Grease separator Eco-Jet/ ■
HydrojetNS 15 – 20 �
For installation in vertical pipes ■
DN 200 after the separator plantCurved shape, with ■
Socket seal (material SBR) �on the inlet and pipe spigot on the drainOdour tight maintenance �opening DN 450
Weight: 7 kg ■
3300.10.31
475
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Designation compatible with Description Article No.
250175
Inspection window Grease separator Eco-Jet-O, ■
-OD, -R, -RD
Nominal width: DN 200 ■
With screen wiper ■
Weight: 5 kg ■
3300.11.10
ca.4
00
ca.350Ø76
R 3/4″
Filling unit Grease separator Eco-Jet-O, ■
-OD, -R, -RD
Free outlet in accordance with ■
DIN 1988 part 4For connection to the drinking ■
water supplyWith ball valve R ■ ¾“With pressure reducer ■
Weight: 3.5 kg ■
3300.11.22
120 x 105
160 Remote control Grease separator Lipurat/ ■
Hydrojet-OA/RA
For interior fitting or installation ■
in connection boxControl conduit without custo- ■
mer-side grounding conductorUp to 50 m: 7 x 1.0 mm² �50 – 200 m: 7 x 1.5 mm² �
Protection category IP 54 ■
Weight: 1 kg ■
0150.02.86
120 x 105
160 Remote control
Grease separator Lipurat/ ■
Hydrojet-OAE/RAEStarch separator Fapurat-OAE ■
For interior fitting or installation ■
in connection boxControl conduit without custo- ■
mer-side grounding conductorUp to 50 m: 7 x 1.0 mm² �50 m – 200 m: 7 x 1.5 mm² �
Protection category IP 54 ■
Weight: 1 kg ■
0150.03.40
li. Ø 455
525 18
8221
625
Coarse trap DN 100
Grease separator Eco-Jet/ ■
HydrojetNS 1 – 4 �
Starch separator Fapurat-PE ■
NS 0.5 – 1 �
For installation in horizontal ■
pipes DN 100 in front of the separator plantsCurved shape, with ■
Socket seal (material SBR) �on the inlet and pipe spigot on the drainStainless steel cage, material �grade 316 for retention of coarse materialsOdour tight maintenance �opening DN 450
Weight: 14 kg ■
3667.00.04
li. Ø 455
525 170
245
645
Coarse trap DN 150
Grease separator Eco-Jet/ ■
HydrojetNS 5.5 – 10 �
Starch separator Fapurat-PE ■
NS 2 �
For installation in horizontal ■
pipes DN 150 in front of the separator plantsCurved shape, with ■
Socket seal (material SBR) �on the inlet and pipe spigot on the drainStainless steel cage, material �grade 316 for retention of coarse materialsOdour tight maintenance �opening DN 450
Weight: 14 kg ■
3667.00.05
476
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Designation compatible with Description Article No.
li. Ø 455
525
150
269
655
Coarse trap DN 200Grease separator Eco-Jet/ ■
HydrojetNS 15 – 20 �
For installation in horizontal ■
pipes DN 200 in front of the separator plantsCurved shape, with ■
Socket seal (material SBR) �on the inlet and pipe spigot on the drainStainless steel cage, material �grade 316 for retention of coarse materialsOdour tight maintenance �opening DN 450
Weight: 14 kg ■
3667.00.06
Entsorgungs-anschluss
Bohrung Ø40Fern-bedienung
500
Lüftungs-anschluss
Connection box Grease separator ■
Starch separator ■
For disposal connection and ■
remote controlStainless steel, material grade ■
304Fitting: „refinements“ ■
Dimensions ■
(width x height x depth) 500 x 500 x 160 mm
7601.80.20
□505
□565
30
Flush-mounted frame Connection box ■
7601.80.20 �
Dimensions ■
(width x height x depth) 565 x 565 x 15 mm
7601.80.21
Bohrung Ø40
370
Entsorgungsanschluss
300
Connection box
Eco-FPI with direct suction ■
Eco-Jet OD/RD/GD ■
Lipurex OD/RD ■
Hydrojet OS/OSE/RS/RSE ■
Lipurat OS/OSE/RS/RSE ■
For disposal connection DN 80 ■
Stainless steel, material grade ■
304Design „refinements“ ■
Door stop ■
Right or left �Door is lockable �
Dimensions ■
(width x height x depth) 370 x 330 x 250 mmWeight: 8 kg ■
7601.80.22
25
331
421
381
371
Flush-mounted frame Connection box ■
7601.80.22 �
Stainless steel, material grade ■
304Dimensions ■
(width x height x depth) 421 x 381 x 25 mm
7601.80.23
477
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Designation compatible with Description Article No.
ØRH
1 –
H2
L
Stop valve
Grease separator for free- ■
standing installationStarch separator for free-stan- ■
ding installation
Cast iron ■
Valve plate, stainless steel ■
spindle, material grade 304
DN 100Length (L): 50 mm
Shaft travel (H1 – H2): 365 – 465 mm
Diameter hand wheel: 200 mm
7602.00.12
DN 150Length (L): 60 mm
Shaft travel (H1 – H2): 478 – 639 mm
Diameter hand wheel: 200 mm
7604.00.12
DN 200Length (L): 60 mm
Shaft travel (H1 – H2): 542 – 743 mm
Diameter hand wheel: 250 mm
7610.00.12
Ø 1
10
L
Flange connection
Stop valve ■
7602.00.12 �7604.00.12 �7610.00.12 �
Stainless steel, material grade ■
304Sealing: NBR ■
DN 100Length (L): 75 mm
7602.00.13
DN 150Length (L): 75 mm
7604.00.13
DN 200Length (L): 120 mm
7610.00.13
Ø12
0Ø
110
15
Ø13
380
176
140
10 Inlet valve DN 100Waste water lifting plants ■
Polyethylene grease separator ■
Polyethylene starch separator ■
PVC ■
Construction length: 176 mm ■
Weight: 2.75 kg ■
0175.13.84
Ø17
4Ø
160
Ø18
610
8
226
1512
Inlet valve DN 150Waste water lifting plants ■
Polyethylene grease separator ■
Polyethylene starch separator ■
PVC ■
Construction length: 226 mm ■
Weight: 6.5 kg ■
0175.13.85
R 1 1/2
160
475
Heating rod Grease separator ■
For homogenization of the ■
grease layerInc. control ■
Electrical connection ■
400 V/50 Hz/16 A/6.0 kW �
7300.01.00
478
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Lipurex-O basic design
Product information
ACO product advantages
Proven stability: 25 years (minimum ■
service life)Upgradeable to extension stage 1-3 ■
Minimization of disposal and mainte- ■
nance costs via economical gradation of the nominal sizeSmall installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100
For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Suction and disposal sump with de- ■
watering socket R 1½“Odour-tight maintenance opening ■
Diameter: 300 mm at NS 1 – 4 �
Diameter: 500 mm at NS 5.5 – 10 �
Inlet and drainage connections in accor- ■
dance with EN 877System ACO Passavant ■
Official approval Z-54.1-413 �
Ausbaustufe: Basisausführung B
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
479
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap Grease sto-rage
Total capa-city
Empty Full
[l] [l] [l] [kg] [kg]NS 1 DN 100 100 100 320 130 450 7551.34.00NS 2 DN 100 200 100 440 135 575 7552.34.00NS 3 DN 100 300 150 630 155 785 7553.34.00NS 4 DN 100 400 200 830 175 1005 7554.34.00
NS 5,5 DN 150 550 360 1430 230 1660 7555.34.00NS 7 DN 150 700 400 1600 255 1855 7557.34.00
NS 8,5 DN 150 850 475 1900 295 2195 7558.34.00NS 10 DN 150 1000 520 2000 315 2315 7560.34.00
Dimensions
maintenance openingventilationDN 100
inletDN... outlet
DN...
L 3 L 1
H 2
H 3
H 1
Ø D
connection for heating rod (optional) *
L 2
B 1 B 2
H 4
sight glass with wiper (optional) *
filling device with solenoid valve and pressure regulator (optional) *
min
500 displayed:
NS4, operating side right operating side left would show all components (sight glass) positioned mirror-inverted to axis.
* not included in the scope of delivery
Nominal size
Dimensions
L1 L2 L3 H1 H2 H3 H4 B1 B2 D[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 1 905 1100 115 830 760 1200 1550 635 760 110NS 2 905 1100 115 1055 985 1320 1700 635 760 110NS 3 1255 1450 115 1055 985 1320 1700 635 760 110NS 4 1605 1800 115 1055 985 1320 1700 635 760 110
NS 5,5 1655 1920 115 1255 1185 1570 1950 885 1010 160NS 7 1855 2120 115 1255 1185 1570 1950 885 1010 160
NS 8,5 2155 2420 115 1255 1185 1570 1950 885 1010 160NS 10 2345 2610 115 1255 1185 1570 1950 885 1010 160
480
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Lipurex-OD extension stage 1
Product information
ACO product advantages
Proven stability: 25 years (minimum ■
service life)Direct emptying without odour build-up ■
Upgradeable to extension stages 2 ■
and 3Minimization of disposal and mainte- ■
nance costs via economical gradation of the nominal sizeSmall installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100
For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1½“Odour-tight maintenance opening ■
Diameter: 300 mm at NS 1 – 4 �
Diameter: 500 mm at NS 5.5 – 10 �
Inlet and drainage connections in accor- ■
dance with EN 877System ACO Passavant ■
Official approval Z-54.1-413 �
Ausbaustufe 1
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
481
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap Grease sto-rage
Total capa-city
Empty Full
[l] [l] [l] [kg] [kg]NS 1 DN 100 100 100 320 135 455 7551.64.00NS 2 DN 100 200 100 440 140 580 7552.64.00NS 3 DN 100 300 150 630 160 790 7553.64.00NS 4 DN 100 400 200 830 180 1010 7554.64.00
NS 5,5 DN 150 550 360 1430 245 1675 7555.64.00NS 7 DN 150 700 400 1600 260 1860 7557.64.00
NS 8,5 DN 150 850 475 1900 300 2200 7558.64.00NS 10 DN 150 1000 520 2000 320 2320 7560.64.00
Dimensions
disposal connection withStorz-coupling R2 ½, DIN 14308
maintenance openingventilationDN100
inlet DN... outlet
DN...
L 3 L 1
H 2
H 3
H 1
H 4
Ø D
connection for heating rod (optional) *
L 2
B 1
B 2
H 5
sight glass with wiper(optional) *
filling device with solenoid valve and pressure regulator (optional) *
min
500
displayed:NS4, operating side right operating side left would show all components (disposal connection, sight glass) positioned mirror-inverted to axis.
* not included in the scope of delivery
Nomi-nal size
Dimensions
L1 L2 L3 H1 H2 H3 H4 H5 B1 B2 D[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 1 905 1100 115 830 760 1200 1380 1550 635 760 110NS 2 905 1100 115 1055 985 1320 1500 1700 635 760 110NS 3 1255 1450 115 1055 985 1320 1500 1700 635 760 110NS 4 1605 1800 115 1055 985 1320 1500 1700 635 760 110
NS 5,5 1655 1920 115 1255 1185 1570 1750 1950 885 1010 160NS 7 1855 2120 115 1255 1185 1570 1750 1950 885 1010 160
NS 8,5 2155 2420 115 1255 1185 1570 1750 1950 885 1010 160NS 10 2345 2610 115 1255 1185 1570 1750 1950 885 1010 160
482
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Lipurat-OS extension stage 2
Product information
ACO product advantages
Proven stability: 25 years (minimum ■
service life)Disposal, cleaning and filling without ■
odour build-upHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionUpgradeable to extension stage 3 ■
Fitting with a disposal pump possible ■
Minimization of disposal and mainte- ■
nance costs via economical gradation of the nominal sizeSmall installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1“Inspection window with wiper ■
Manual operation of the high-pressure ■
interior cleaning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Odour-tight maintenance opening ■
Diameter: 300 mm at NS 1 – 4 �
Diameter: 500 mm at NS 5.5 – 10 �
Filling unit with ball valve (connection ■
R ¾“) for manual re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/3.9 kWSystem ACO Passavant ■
Official approval Z-54.1-413 �
Ausbaustufe 2
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
483
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Total ca-pacity
Empty Full Right Left
[l] [l] [l] [kg] [kg]NS 1 DN 100 100 100 320 165 485 7571.74.41 7571.74.31NS 2 DN 100 200 100 440 170 610 7572.74.41 7572.74.31NS 3 DN 100 300 150 630 190 820 7573.74.41 7573.74.31NS 4 DN 100 400 200 830 210 1040 7574.74.41 7574.74.31
NS 5,5 DN 150 550 360 1430 280 1710 7575.74.41 7575.74.31NS 7 DN 150 700 400 1600 290 1890 7577.74.41 7577.74.31
NS 8,5 DN 150 850 475 1900 330 2230 7578.74.41 7578.74.31NS 10 DN 150 1000 520 2000 350 2350 7580.74.41 7580.74.31
Dimensions
H 5
disposal connection with Storz-B- coupling R 2 ½,DIN 14308
high-pressurespray head
maintenanceopening
ventilationDN 100
InletDN ... outlet
DN ...
L 4 L 1
L 3
H 2
H 3
H 1
H 4
Ø D
connection for heating rod (optional) *
sight glasswith wiper
L 2
B 1
B 2
filling device with solenoidvalve and pressure regulator
high-pressurepump
min
500
displayed:NS4, operating side right operating side left would show all component(disposal connection, sight glass) positioned mirror-inverted to axis.
* not included in the scope of delivery
No-minal size
Dimensions
L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 D[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 1 905 1100 1320 115 830 760 1200 1380 1550 635 760 110NS 2 905 1100 1320 115 1055 985 1320 1500 1700 635 760 110NS 3 1255 1450 1670 115 1055 985 1320 1500 1700 635 760 110NS 4 1605 1800 2020 115 1055 985 1320 1500 1700 635 760 110
NS 5,5 1655 1920 2070 115 1255 1185 1570 1750 1950 885 1010 160NS 7 1855 2120 2270 115 1255 1185 1570 1750 1950 885 1010 160
NS 8,5 2155 2420 2570 115 1255 1185 1570 1750 1950 885 1010 160NS 10 2345 2610 2760 115 1255 1185 1570 1750 1950 885 1010 160
484
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Lipurat-OSE extension stage 2
Product information
ACO product advantages
Proven stability: 25 years (minimum ■
service life)Disposal, cleaning and filling without ■
odour build-upHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionUpgradeable to extension stage 3 ■
Minimization of disposal and mainte- ■
nance costs via economical gradation of the nominal sizeSmall installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1½“
Inspection window with wiper ■
Manual operation of the high-pressure ■
interior cleaning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Standard control with centralised fault ■
signalDisposal pump with free flow impeller ■
Motor rating: 3.0 kW/2850 U/min �
Delivery performance: 20 m³/h with �
1 bar medium delivery headStop valve in front of disposal pump ■
Odour-tight maintenance opening ■
Diameter: 300 mm at NS 1 – 4 �
Diameter: 500 mm at NS 5.5 – 10 �
Filling unit with ball valve (connection ■
R ¾“) for manual re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/6.9 kWSystem ACO Passavant ■
Official approval Z-54.1-413 �
Ausbaustufe 2
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung und Reinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Entsorgungund Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungInkl. Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
485
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Total ca-pacity
Empty Full Right Left
[l] [l] [l] [kg] [kg]NS 1 DN 100 100 100 320 215 535 7571.84.41 7571.84.31NS 2 DN 100 200 100 440 220 660 7572.84.41 7572.84.31NS 3 DN 100 300 150 630 240 870 7573.84.41 7573.84.31NS 4 DN 100 400 200 830 260 1090 7574.84.41 7574.84.31
NS 5,5 DN 150 550 360 1430 335 1765 7575.84.41 7575.84.31NS 7 DN 150 700 400 1600 345 1915 7577.84.41 7577.84.31
NS 8,5 DN 150 850 475 1900 385 2285 7578.84.41 7578.84.31NS 10 DN 150 1000 520 2000 400 2400 7580.84.41 7580.84.31
Dimensions
disposal connection with Storz-B-coupling R 2 ½, DIN 14308
filling device with solenoid valve and pressure regulator
maintenanceopening
disposal pump
stop valve
ventilationDN 100
InletDN ... outlet
DN...
L 4 L 1
L 3
L 2
B 1
B 2
B 3
B 4
H 1
H 4
Ø D
connection for heating rod(optional) *
sight glass with wiperswitch box
high-pressure spray head
min
500
displayed:NS4, operating side right operating side left would show all components(disposal connection, filling device, sight glass) positioned mirror-inverted to axis.
* not included in the scope of delivery
H 5
H 2
H 3
high-pressure pump
No-minal size
Dimensions
L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 B3 B4 D[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 1 905 1100 1850 650 830 760 1200 1380 1550 635 760 370 800 110NS 2 905 1100 1850 650 1055 985 1320 1500 1700 635 760 370 800 110NS 3 1255 1450 2200 650 1055 985 1320 1500 1700 635 760 370 800 110NS 4 1605 1800 2550 650 1055 985 1320 1500 1700 635 760 370 800 110
NS 5,5 1655 1920 2600 650 1255 1185 1570 1750 1950 885 1010 450 1000 160NS 7 1855 2120 2800 650 1255 1185 1570 1750 1950 885 1010 450 1000 160
NS 8,5 2155 2420 3100 650 1255 1185 1570 1750 1950 885 1010 450 1000 160NS 10 2345 2610 3300 650 1255 1185 1570 1750 1950 885 1010 450 1000 160
486
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Lipurat-OA extension stage 3
Product information
ACO product advantages
Proven stability: 25 years (minimum ■
service life)Disposal, cleaning and filling without ■
odour build-upPre- and post- cleaning times can be ■
set individuallyHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionFitting with a disposal pump possible ■
Minimization of disposal and mainte- ■
nance costs via economical gradation of the nominal sizeSmall installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1½“Inspection window with wiper ■
Automatic high-pressure interior clea- ■
ning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Standard control with centralised fault ■
signalOdour-tight maintenance opening ■
Diameter: 300 mm at NS 1 – 4 �
Diameter: 500 mm at NS 5.5 – 10 �
Filling unit with solenoid valve (connec- ■
tion R ¾“) for automatic re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/3.9 kWSystem ACO Passavant ■
Official approval Z-54.1-413 �
Ausbaustufe 3
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
487
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Total ca-pacity
Empty Full Right Left
[l] [l] [l] [kg] [kg]NS 1 DN 100 100 100 320 165 485 7571.74.42 7571.74.32NS 2 DN 100 200 100 440 170 610 7572.74.42 7572.74.32NS 3 DN 100 300 150 630 195 825 7573.74.42 7573.74.32NS 4 DN 100 400 200 830 215 1045 7574.74.42 7574.74.32
NS 5,5 DN 150 550 360 1430 285 1715 7575.74.42 7575.74.32NS 7 DN 150 700 400 1600 295 1895 7577.74.42 7577.74.32
NS 8,5 DN 150 850 475 1900 335 2235 7578.74.42 7578.74.32NS 10 DN 150 1000 520 2000 350 2350 7580.74.42 7580.74.32
Dimensions
H 5
disposal connection with Storz-B-coupling R 2 ½, DIN 14308
filling device with solenoid valve and pressure regulator
high-pressure spray head
maintenanceopening
ventilationDN 100
inlet DN... outlet
DN ...
L 4 L 1
L 3
H 2
H 3
H 1
H 4
Ø11
0
connection for heating rod (optional) *
sight glasswith wiperswitch box
L 2
B 1
B 2
B 3
B 4
high-pressure pump
min
500
displayed:NS4, operating side right,operating side left would show all components(disposal connection, filling device, sight glass) positioned mirror-inverted to axis.
* not included in the scope of delivery
No-minal size
Dimensions
L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 B3 B4 D[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 1 905 1100 1320 115 830 760 1200 1380 1550 635 760 370 800 110NS 2 905 1100 1320 115 1055 985 1320 1500 1700 635 760 370 800 110NS 3 1255 1450 1670 115 1055 985 1320 1500 1700 635 760 370 800 110NS 4 1605 1800 2020 115 1055 985 1320 1500 1700 635 760 370 800 110
NS 5,5 1655 1920 2070 115 1255 1185 1570 1750 1950 885 1010 550 1000 160NS 7 1855 2120 2270 115 1255 1185 1570 1750 1950 885 1010 550 1000 160
NS 8,5 2155 2420 2570 115 1255 1185 1570 1750 1950 885 1010 550 1000 160NS 10 2345 2610 2760 115 1255 1185 1570 1750 1950 885 1010 550 1000 160
488
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Lipurat-OAE extension stage 3
Product information
ACO product advantages
Proven stability: 25 years (minimum ■
service life)Disposal, cleaning and filling without ■
odour build-upPre- and post- cleaning times can be ■
set individuallyHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionMinimization of disposal and mainte- ■
nance costs via economical gradation of the nominal sizeSmall installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“
Suction and disposal sump with de- ■
watering socket R 1½“Inspection window with wiper ■
Automatic high-pressure interior clea- ■
ning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Standard control with centralised fault ■
signalDisposal pump with free flow impeller ■
Motor rating: 3.0 kW/2850 U/min �
Delivery performance: 20 m³/h with �
1 bar medium delivery headStop valve in front of disposal pump ■
Odour-tight maintenance opening ■
Diameter: 300 mm at NS 1 – 4 �
Diameter: 500 mm at NS 5.5 – 10 �
Filling unit with solenoid valve (connec- ■
tion R ¾“) for automatic re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/6.9 kWSystem ACO Passavant ■
Official approval Z-54.1-413 �
Ausbaustufe 3
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Inkl. Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
489
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalOval shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Total ca-pacity
Empty Full Right Left
[l] [l] [l] [kg] [kg]NS 1 DN 100 100 100 320 215 535 7571.84.42 7571.84.32NS 2 DN 100 200 100 440 220 660 7572.84.42 7572.84.32NS 3 DN 100 300 150 630 240 870 7573.84.42 7573.84.32NS 4 DN 100 400 200 830 260 1090 7574.84.42 7574.84.32
NS 5,5 DN 150 550 360 1430 335 1765 7575.84.42 7575.84.32NS 7 DN 150 700 400 1600 345 1915 7577.84.42 7577.84.32
NS 8,5 DN 150 850 475 1900 385 2285 7578.84.42 7578.84.32NS 10 DN 150 1000 520 2000 400 2400 7580.84.42 7580.84.32
Dimensions
H 5
disposal connection with Storz-B- coupling R 2 ½, DIN 14308
filling device with solenoid valve and pressure regulator
high-pressure spray head
maintenanceopening
disposal pump
stop valve
ventilationDN 100
inlet DN ... outlet
DN...
L 4 L 1
L 3
L 2
B 1
B 2
B 3
B 4
H 2
H 3
H 1
H 4
Ø D
connection for heating rod(optional) *
sight glass with wiper
switch box
high-pressure pump
min
500
displayed:NS4, operating side right operating side left would show all components(disposal connection, filling device, sight glass) positioned mirror-inverted to axis.
* not included in the scope of delivery
No-minal size
Dimensions
L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 B3 B4 D[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 1 905 1100 1850 650 830 760 1200 1380 1550 635 760 370 800 110NS 2 905 1100 1850 650 1055 985 1320 1500 1700 635 760 370 800 110NS 3 1255 1450 2200 650 1055 985 1320 1500 1700 635 760 370 800 110NS 4 1605 1800 2550 650 1055 985 1320 1500 1700 635 760 370 800 110
NS 5,5 1655 1920 2600 650 1255 1185 1570 1750 1950 885 1010 450 1000 160NS 7 1855 2120 2800 650 1255 1185 1570 1750 1950 885 1010 450 1000 160
NS 8,5 2155 2420 3100 650 1255 1185 1570 1750 1950 885 1010 450 1000 160NS 10 2345 2610 3300 650 1255 1185 1570 1750 1950 885 1010 450 1000 160
490
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Lipurex-R basic design
Product information
ACO product advantages
Easy to transport and install via single ■
component installationUpgradeable to extension stage 1-3 ■
Small installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost free
With integrated sludge trap ■
Operator side: right/left ■
Suction and disposal sump with de- ■
watering socket R 1½“Odour-tight maintenance opening ■
Diameter: 300 mm at NS 1 – 4 �
Diameter: 500 mm at NS 7 – 20 �
Inlet and drainage connections in accor- ■
dance with EN 877System ACO Passavant ■
Official approval Z-54.6-320 �
Ausbaustufe: Basisausführung B
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
491
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap Greasestorage
Totalcapacity
Empty Full Hea-viest
compo-nents
[l] [l] [l] [kg] [kg] [kg]
NS 2 DN 100 210 120 715 168 882 88 7502.32.00NS 4 DN 100 420 165 915 178 1093 88 7504.32.00NS 7 DN 150 705 400 1950 332 2284 128 7507.32.00
NS 10 DN 150 1000 400 2250 342 2589 128 7510.32.00NS 15 DN 200 1630 800 3350 485 3835 196 7515.32.00NS 20 DN 200 2110 800 3820 501 4321 196 7520.32.00
Dimensions
Zmaintenance opening ventilation
DN 100
inletDN ... outlet
DN ...
connection for heating rod (optional)H
1
H 2
H 4
Ø D 1
L 1
Ø D
L 3
L 2
H 3
min
500
filling device withball valve and pressure regulator (optional) *
sight glass with wiper(optional) *
displayed:NS 7, operating side rights,operating side left would show all components(sight glass) positioned mirror-inverted to axis.
* not included in the scope of delivery
Nominal size
Dimensions
L1 L2 L3 H1 H2 H3 H4 D D1 Z/n[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 2 1180 120 150 975 905 1200 1520 110 1000 785/2NS 4 1180 120 150 1240 1170 1450 1770 110 1000 785/2NS 7 1800 120 150 1430 1330 1780 2100 160 1500 790/3
NS 10 1800 120 150 1600 1500 1950 2270 160 1500 790/3NS 15 2050 120 150 1755 1685 2120 2440 210 1750 820/3NS 20 2050 120 150 1935 1885 2320 2640 210 1750 820/3
492
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Lipurex-RD extension stage 1
Product information
ACO product advantages
Easy to transport and install via single ■
component installationDirect emptying without odour build-up ■
Upgradeable to extension stages 2 ■
and 3Small installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost free
With integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1½“Odour-tight maintenance opening ■
Diameter: 300 mm at NS 1 – 4 �
Diameter: 500 mm at NS 7 – 20 �
Inlet and drainage connections in accor- ■
dance with EN 877System ACO Passavant ■
Official approval Z-54.6-320 �
Ausbaustufe 1
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
493
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap Grease sto-rage
Total capa-city
Empty Full Hea-viest
compo-nents
[l] [l] [l] [kg] [kg] [kg]NS 2 DN 100 210 120 715 172 886 88 7502.62.00NS 4 DN 100 420 165 915 186 1101 88 7504.62.00NS 7 DN 150 705 400 1950 338 2290 128 7507.62.00
NS 10 DN 150 1000 400 2250 351 2598 128 7510.62.00NS 15 DN 200 1630 800 3350 492 3842 196 7515.62.00NS 20 DN 200 2110 800 3820 510 4330 196 7520.62.00
Dimensions
L 1
L 2
disposal connection with Storz-B-coupling R 2 ½DIN 14308
H 4
ventilationDN 100
inletDN ... outlet
DN ...
connection for heating rod (optional)H
1
H 2
H 5
Ø D 1
Ø D
min
500
filling device with ball valve and pressure regulator (optional) *
sight glass with wiper(optional) *
displayed:NS7, operating side right operating side left would show all components(disposal connection, sight glass) positioned mirror-inverted to axis.
* not included in the scope of delivery
maintenance opening
H 3
L 3
Z
Nomi-nal size
Dimensions
L1 L2 L3 H1 H2 H3 H4 H5 D D1 Z/n[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 2 1180 120 150 975 905 1200 1400 1520 110 1000 785/2NS 4 1180 120 150 1240 1170 1450 1650 1770 110 1000 785/2NS 7 1800 120 150 1430 1330 1780 1930 2100 160 1500 790/3
NS 10 1800 120 150 1600 1500 1950 2100 2270 160 1500 790/3NS 15 2050 120 150 1755 1685 2120 2250 2440 210 1750 820/3NS 20 2050 120 150 1935 1885 2320 2450 2640 210 1750 820/3
494
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Lipurat-RS extension stage 2
Product information
ACO product advantages
Easy to transport and install via single ■
component installationDisposal, cleaning and filling without ■
odour build-upHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionUpgradeable to extension stage 3 ■
Fitting with a disposal pump possible ■
Small installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For installation in rooms ■
With integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“
Suction and disposal sump with de- ■
watering socket R 1½“Inspection window with wiper ■
Manual operation of the high-pressure ■
interior cleaning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Odour-tight maintenance opening ■
Diameter: 300 mm at NS 1 – 4 �
Diameter: 500 mm at NS 7 – 20 �
Filling unit with ball valve (connection ■
R ¾“) for manual re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/3.9 kWSystem ACO Passavant ■
Official approval Z-54.6-320 �
Ausbaustufe 2
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
495
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Totalcapacity
Empty Full Hea-viestcom-pon-ents
Right Left
[l] [l] [l] [kg] [kg] [kg]NS 2 DN 100 210 120 715 204 918 88 7502.73.41 7502.73.31NS 4 DN 100 420 165 915 218 1133 88 7504.73.41 7504.73.31NS 7 DN 150 705 400 1950 367 2319 128 7507.73.41 7507.73.31
NS 10 DN 150 1000 400 2250 382 2629 128 7510.73.41 7510.73.31NS 15 DN 200 1630 800 3350 523 3873 196 7515.73.41 7515.73.31NS 20 DN 200 2110 800 3820 541 4361 196 7520.73.41 7520.73.31
DimensionsZ
disposal connection with Storz-B-coupling R 2½ DIN 14308
high-pressurespray head
maintenanceopening
ventilationDN 100
inletDN ... outlet
DN ...
connection for heating rod (optional)*
sight glass with wiper
H 1
H 2
H 4
H 5
Ø D 1
Ø D
L 3
H 3
min
500
filling device with ball valve and pressure regulator
displayed:NS7, operating side right operating side left would show all components(disposal connection, sight glass, high pressure pump) positioned mirror-inverted to axis.
* not included in the scope of delivery
L 1
L 2 L 4 high-pressure
pump
No-minal size
Dimensions
L1 L2 L3 L4 H1 H2 H3 H4 H5 D D1 Z/n[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 2 1180 120 150 250 975 905 1200 1400 1520 110 1000 785/2NS 4 1180 120 150 250 1240 1170 1450 1650 1770 110 1000 785/2NS 7 1800 120 150 250 1430 1330 1780 1930 2100 160 1500 790/3
NS 10 1800 120 150 250 1600 1500 1950 2100 2270 160 1500 790/3NS 15 2050 120 150 250 1755 1685 2120 2250 2440 210 1750 820/3NS 20 2050 120 150 250 1955 1885 2320 2450 2640 210 1750 820/3
496
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Lipurat-RSE extension stage 2
Product information
ACO product advantages
Easy to transport and install via single ■
component installationDisposal, cleaning and filling without ■
odour build-upHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionUpgradeable to extension stage 3 ■
Small installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1½“Inspection window with wiper ■
Manual operation of the high-pressure ■
interior cleaning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Standard control with centralised fault ■
signalDisposal pump with free flow impeller ■
Motor rating: 3.0 kW/2850 U/min �
Delivery performance: 20 m³/h with �
1 bar medium delivery headStop valve in front of disposal pump ■
Odour-tight maintenance opening ■
Diameter: 300 mm at NS 1 – 4 �
Diameter: 500 mm at NS 7 – 20 �
Filling unit with ball valve (connection ■
R ¾“) for manual re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/6.9 kWSystem ACO Passavant ■
Official approval Z-54.6-320 �
Ausbaustufe 2
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungInkl. Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
497
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Totalcapacity
Empty Full Hea-viestcom-pon-ents
Right Left
[l] [l] [l] [kg] [kg] [kg]NS 2 DN 100 210 120 715 236 950 88 7502.73.61 7502.73.51NS 4 DN 100 420 165 915 249 1164 88 7504.73.61 7504.73.51NS 7 DN 150 705 400 1950 399 2351 128 7507.73.61 7507.73.51
NS 10 DN 150 1000 400 2250 414 2661 128 7510.73.61 7510.73.51NS 15 DN 200 1630 800 3350 558 3908 196 7515.73.61 7515.73.51NS 20 DN 200 2110 800 3820 576 4396 196 7520.73.61 7520.73.51
Dimensions
Z
disposal connection with Storz-B-coupling R 2½ DIN 14308
filling device with ball valve and pressure regulator
high-pressurespray head
maintenanceopening
disposalpump
stop valve
ventilationDN 100
inletDN ... outlet
DN ...
connection for heating rod (optional) *
sight glass with wiper
switch box
H 1
H 2
H 4
H 5
Ø D 1 L 4
Ø D
high pressurepump
L 3
L 2
L 5
L 6
H 3
min
500 displayed:
NS7, operating side right operating side left would show all components(disposal connection, sight glass, switch box, high pressure pump) positioned mirror-inverted to axis.
* not included in the scope of delivery
L 1
No-minal size
Dimensions
L1 L2 L3 L4 L5 L6 H1 H2 H3 H4 H5 D D1 Z/n[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 2 1180 120 135 520 110 250 975 905 1200 1400 1520 110 1000 785/2NS 4 1180 120 135 520 110 250 1240 1170 1450 1650 1770 110 1000 785/2NS 7 1800 120 135 520 110 250 1430 1330 1780 1930 2100 160 1500 790/3
NS 10 1800 120 135 520 110 250 1600 1500 1950 2100 2270 160 1500 790/3NS 15 2050 120 135 520 110 250 1755 1685 2120 2250 2440 210 1750 820/3NS 20 2050 120 135 520 110 250 1955 1885 2320 2450 2640 210 1750 820/3
498
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Lipurat-RA extension stage 3
Product information
ACO product advantages
Easy to transport and install via single ■
component installationDisposal, cleaning and filling without ■
odour build-upPre- and post- cleaning times can be ■
set individuallyHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionFitting with a disposal pump possible ■
Small installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“
Suction and disposal sump with de- ■
watering socket R 1½“Inspection window with wiper ■
Automatic high-pressure interior clea- ■
ning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Standard control with centralised fault ■
signalOdour-tight maintenance opening ■
Diameter: 300 mm at NS 1 – 4 �
Diameter: 500 mm at NS 7 – 20 �
Filling unit with solenoid valve (connec- ■
tion R ¾“) for automatic re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/3.9 kWSystem ACO Passavant ■
Official approval Z-54.6-320 �
Ausbaustufe 3
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Optional Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
499
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Total ca-pacity
Empty Full Hea-viestcom-pon-ents
Right Left
[l] [l] [l] [kg] [kg] [kg]NS 2 DN 100 210 120 715 207 921 88 7502.73.42 7502.73.32NS 4 DN 100 420 165 915 221 1136 88 7504.73.42 7504.73.32NS 7 DN 150 705 400 1950 370 2322 128 7507.73.42 7507.73.32
NS 10 DN 150 1000 400 2250 385 2632 128 7510.73.42 7510.73.32NS 15 DN 200 1630 800 3350 526 3876 196 7515.73.42 7515.73.32NS 20 DN 200 2110 800 3820 543 4364 196 7520.73.42 7520.73.32
Dimensions
disposal connection with Storz-B-coupling R 2½, DIN 14308
filling device with solenoid valveand pressure regulator
high-pressurespray head
maintenance opening
ventilationDN 100
inletDN ... outlet
DN ...
connection for heating rod (optional)*
sight glass with wiper
switch box
H 1
H 2
H 4
H 5
Ø D 1
Ø D
L 3
H 3
min
500
Z
displayed:NS7, operating side right operating side left would show all components(disposal connection, switch box, sight glass, high-pressure pump) positioned mirror-inverted to axis.
* not included in the scope of delivery
L 1
L 2 L 5 high-pressure
pump
L 4
No-minal size
Dimensions
L1 L2 L3 L4 L5 H1 H2 H3 H4 H5 D D1 Z/n[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 2 1180 120 150 110 250 975 905 1200 1400 1570 110 1000 785/2NS 4 1180 120 150 110 250 1240 1170 1450 1650 1820 110 1000 785/2NS 7 1800 120 150 110 250 1430 1330 1780 1930 2150 160 1500 790/3
NS 10 1800 120 150 110 250 1600 1500 1950 2100 2320 160 1500 790/3NS 15 2050 120 150 110 250 1755 1685 2120 2250 2490 210 1750 820/3NS 20 2050 120 150 110 250 1955 1885 2320 2450 2690 210 1750 820/3
500
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Lipurat-RAE extension stage 3
Product information
ACO product advantages
Easy to transport and install via single ■
component installationDisposal, cleaning and filling without ■
odour build-upPre- and post- cleaning times can be ■
set individuallyHydro mechanical high-pressure ■
cleaning - requires only a cold water connectionSmall installation clearance ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100For free-standing installation in rooms - ■
frost freeWith integrated sludge trap ■
Operator side: right/left ■
Disposal connection, Storz B coupling ■
R 2½“Suction and disposal sump with de- ■
watering socket R 1½“
Inspection window with wiper ■
Automatic high-pressure interior clea- ■
ning with pumpNominal pressure: 175 bar �
Capacity: 13 l/min �
Milling, mixing, flushing in one step �
Standard control with centralised fault ■
signalDisposal pump with free flow impeller ■
Motor rating: 3.0 kW/2850 U/min �
Delivery performance: 20 m³/h with �
1 bar medium delivery headStop valve in front of disposal pump ■
Odour-tight maintenance opening ■
Diameter: 300 mm at NS 1 – 4 �
Diameter: 500 mm at NS 7 – 20 �
Filling unit with solenoid valve (connec- ■
tion R ¾“) for automatic re-fillingInlet and drainage connections in accor- ■
dance with EN 877Electrical connection: ■
400 V/50 Hz/16 A/6.9 kWSystem ACO Passavant ■
Official approval Z-54.6-320 �
Ausbaustufe 3
Merkmale der Basisausführung:
Entsorgung und Reinigung über Deckel
Geruchsbildung bei Entsorgung undReinigung
Merkmale der Ausbaustufe 1:
Anschluss für Direktabsaugung
Geruchsbildung bei Reinigung
Merkmale der Ausbaustufe 2:
Anschluss für Direktabsaugung
Hochdruckreinigung mit manueller
BedienungOptional Entsorgungspumpe
Keine Geruchsbildung
Merkmale der Ausbaustufe 3:
Anschluss für Direktabsaugung
Vollautomatischer Programmablauf
Inkl. Entsorgungspumpe und
FernbedienungKeine Geruchsbildung
501
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Ordering information
Nominal size
Nominal width
Capacity Weight Article No.
Sludge trap
Grease storage
Totalcapacity
Empty Full Hea-viestcom-pon-ents
Right Left
[l] [l] [l] [kg] [kg] [kg]NS 2 DN 100 210 120 715 236 950 88 7502.73.62 7502.73.52NS 4 DN 100 420 165 915 249 1164 88 7504.73.62 7504.73.52NS 7 DN 150 705 400 1950 399 2351 128 7507.73.62 7507.73.52
NS 10 DN 150 1000 400 2250 415 2661 128 7510.73.62 7510.73.52NS 15 DN 200 1630 800 3350 558 3908 196 7515.73.62 7515.73.52NS 20 DN 200 2110 800 3820 576 4396 196 7520.73.62 7520.73.52
Dimensions
disposal connection with Storz-B-coupling R 2½, DIN 14308
filling device withsolenoid valveand pressure regulator
high-pressurespray head
maintenanceopening
disposal pump
stop valve
ventilationDN 100
inletDN ... outlet
DN ...
connection for heating rod (optional) *
sight glasswith wiper
switch box
H 1
H 2
H 4
H 5
Ø D 1 L 4
Ø D
L 3
H 3
min
500 displayed:
NS7, operating side right operating side left would show all components(disposal connection, switch box, sight glass, high-pressure pump) positioned mirror-inverted to axis.
* not included in the scope of delivery
Z
high-pressure pumpL
2
L 5
L 6
L 1
No-minal size
Dimensions
L1 L2 L3 L4 L5 L6 H1 H2 H3 H4 H5 D D1 Z/n[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
NS 2 1180 120 135 520 110 250 975 905 1200 1400 1570 110 1000 785/2NS 4 1180 120 135 520 110 250 1240 1170 1450 1650 1820 110 1000 785/2NS 7 1800 120 135 520 110 250 1430 1330 1780 1930 2150 160 1500 790/3
NS 10 1800 120 135 520 110 250 1600 1500 1950 2100 2320 160 1500 790/3NS 15 2050 120 135 520 110 250 1755 1685 2120 2250 2490 210 1750 820/3NS 20 2050 120 135 520 110 250 1955 1885 2320 2450 2690 210 1750 820/3
502
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Accessories
Designation compatible with Description Article No.
Ø323
295
57
127
480
Sampling pipe DN 100
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 1 – 4 �
Starch separator Fapurat ■
NS 0.5 – 1 �Light-oil separator Coalisator- ■
R/-RDNS 3 �
Stainless steel, material grade ■
316Curved design ■
Gradient: 70 mm ■
For installation in horizontal ■
pipes DN 100 behind the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 13 kg ■
7300.09.10
Ø323
395
82
152
480
Sampling pipe DN 150
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 5.5 – 10 �
Starch separator Fapurat ■
NS 2 �Light-oil separator Coalisator- ■
R/-RDNS 6 – 10 �
Stainless steel, material grade ■
316Curved design ■
Gradient: 70 mm ■
For installation in horizontal ■
pipes DN 150 behind the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 14 kg ■
7300.09.20
Ø323
395
107
177
480
Sampling pipe DN 200
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 15 – 20 �
Light-oil separator Coalisator-E ■
NS 20 �
Stainless steel, material grade ■
316Curved design ■
Gradient: 70 mm ■
For installation in horizontal ■
pipes DN 200 behind the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 15 kg ■
7300.09.30
Ø323
355
127
60 320405
Sampling pipe DN 100
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 1 – 4 �
Starch separator Fapurat ■
NS 0.5 – 1 �Light-oil separator Coalisator- ■
R/-RDNS 3 �
Stainless steel, material grade ■
316Curved design ■
For installation in vertical pipes ■
DN 100 behind the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 13 kg ■
7300.10.20
Ø323
455
152
60 320405
Sampling pipe DN 150
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 5.5 – 10 �
Starch separator Fapurat ■
NS 2 �Light-oil separator Coalisator- ■
R/-RDNS 6 – 10 �
Stainless steel, material grade ■
316Curved design ■
For installation in vertical pipes ■
DN 150 behind the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 14 kg ■
7300.15.20
Ø323
455
177
60 320405
Sampling pipe DN 200
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 15 – 20 �
Light-oil separator Coalisator-E ■
NS 20 �
Stainless steel, material grade ■
316Curved design ■
For installation in vertical pipes ■
DN 200 behind the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 15 kg ■
7300.16.20
503
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Designation compatible with Description Article No.
Ø323
295
57
127
480
Coarse trap DN 100
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 1 – 4 �
Starch separator Fapurat ■
NS 0.5 – 1 �
Stainless steel, material grade ■
316Curved design ■
Gradient: 70 mm ■
For installation in horizontal ■
pipes DN 100 in front of the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 15 kg ■
7300.09.70
Ø323
395
82
152
480
Coarse trap DN 150
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 5.5 – 10 �
Starch separator Fapurat ■
NS 2 �
Stainless steel, material grade ■
316Curved design ■
Gradient: 70 mm ■
For installation in horizontal ■
pipes DN 150 in front of the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 16 kg ■
7300.09.80
Ø323
395
107
177
480
Coarse trap DN 200Grease separator LipurexLipu- ■
rat/Lipator/LipatomatNS 15 – 20 �
Stainless steel, material grade ■
316Curved design ■
Gradient: 70 mm ■
For installation in horizontal ■
pipes DN 200 in front of the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 17 kg ■
7300.09.90
290215
Inspection window Grease separator Lipurex-O, ■
-OD, -R, -RD
Nominal width: DN 200 ■
With screen wiper ■
Weight: 5 kg ■
7602.00.26
ca.3
25
ca.350Ø76
R 3/4″
Filling unit Grease separator Lipurex-O, ■
-OD, -R, -RD
Free outlet in accordance with ■
DIN 1988 part 4For connection to the drinking ■
water supplyWith ball valve R ■ ¾“Weight: 2 kg ■
7602.00.25
120 x 105
160 Remote control Grease separator Lipurat/ ■
Hydrojet-OA/RA
For interior fitting or installation ■
in connection boxControl conduit without custo- ■
mer-side grounding conductorUp to 50 m: 7 x 1.0 mm² �50 – 200 m: 7 x 1.5 mm² �
Protection category IP 54 ■
Weight: 1 kg ■
0150.02.86
120 x 105
160 Remote control
Grease separator Lipurat/ ■
Hydrojet-OAE/RAEStarch separator Fapurat-OAE ■
For interior fitting or installation ■
in connection boxControl conduit without custo- ■
mer-side grounding conductorUp to 50 m: 7 x 1.0 mm² �50 m – 200 m: 7 x 1.5 mm² �
Protection category IP 54 ■
Weight: 1 kg ■
0150.03.40
504
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalCurved shape – stainless steel (material grade 316)
Separator Grease separator Free-standing installation
Designation compatible with Description Article No.
Entsorgungs-anschluss
Bohrung Ø40Fern-bedienung
500
Lüftungs-anschluss
Connection box Grease separator ■
Starch separator ■
For disposal connection and ■
remote controlStainless steel, material grade ■
304Fitting: „refinements“ ■
Dimensions ■
(width x height x depth) 500 x 500 x 160 mm
7601.80.20
□505
□565
30
Flush-mounted frame Connection box ■
7601.80.20 �
Dimensions ■
(width x height x depth) 565 x 565 x 15 mm
7601.80.21
Bohrung Ø40
370
Entsorgungsanschluss
300
Connection box
Eco-FPI with direct suction ■
Eco-Jet OD/RD/GD ■
Lipurex OD/RD ■
Hydrojet OS/OSE/RS/RSE ■
Lipurat OS/OSE/RS/RSE ■
For disposal connection DN 80 ■
Stainless steel, material grade ■
304Design „refinements“ ■
Door stop ■
Right or left �Door is lockable �
Dimensions ■
(width x height x depth) 370 x 330 x 250 mmWeight: 8 kg ■
7601.80.22
25
331
421
381
371
Flush-mounted frame Connection box ■
7601.80.22 �
Stainless steel, material grade ■
304Dimensions ■
(width x height x depth) 421 x 381 x 25 mm
7601.80.23
ØR
H1
– H
2
L
Stop valve
Grease separator for free- ■
standing installationStarch separator for free-stan- ■
ding installation
Cast iron ■
Valve plate, stainless steel ■
spindle, material grade 304
DN 100Length (L): 50 mm
Shaft travel (H1 – H2): 365 – 465 mm
Diameter hand wheel: 200 mm
7602.00.12
DN 150Length (L): 60 mm
Shaft travel (H1 – H2): 478 – 639 mm
Diameter hand wheel: 200 mm
7604.00.12
DN 200Length (L): 60 mm
Shaft travel (H1 – H2): 542 – 743 mm
Diameter hand wheel: 250 mm
7610.00.12
505
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalDivided shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Designation compatible with Description Article No.Ø
110
L
Flange connection
Stop valve ■
7602.00.12 �7604.00.12 �7610.00.12 �
Stainless steel, material grade ■
304Sealing: NBR ■
DN 100Length (L): 75 mm
7602.00.13
DN 150Length (L): 75 mm
7604.00.13
DN 200Length (L): 120 mm
7610.00.13
R 1 1/2
160
475
Heating rod Grease separator ■
For homogenization of the ■
grease layerInc. control ■
Electrical connection ■
400 V/50 Hz/16 A/6.0 kW �
7300.01.00
506
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalDivided shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Eco-Jet-G basic design
Product information
ACO product advantages
Proven stability: 25 years (minimum ■
service life)Can be installed in locations difficult ■
to access, via division of the plant into three partsMarginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100
For free-standing installation in rooms - ■
frost freeWith separate sludge trap ■
Odour-tight maintenance opening, ■
diameter: 450 mmInlet and drainage connections in accor- ■
dance with EN 877System ACO Passavant ■
Official approval Z-54.6-363 �
Ordering information
Nominal size
Capacity Weight Article No.
Sludge trap Grease storage Total capacity Empty Full[l] [l] [l] [kg] [kg]
NS 2 210 80 480 75 555 3802.00.00NS 4 420 160 880 115 995 3804.00.00
Dimensions
maintenance opening
inletDN 100 outlet
DN 100
Ø 1
10
min
500
1005
1360
935
L 1
a b
L 2
700
Nominal size DimensionsL1 L2 A B
[mm] [mm] [mm] [mm]NS 2 1180 1360 510 660NS 4 2070 2250 945 1115
507
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalDivided shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Eco-Jet-GD extension stage 1
Product information
ACO product advantages
Proven stability: 25 years (minimum ■
service life)Can be installed in locations difficult ■
to access, via division of the plant into three partsDirect emptying without odour build-up ■
Marginal weight ■
Grease separator plant in accordance ■
with EN 1825 and DIN 4040-100
For free-standing installation in rooms - ■
frost freeWith separate sludge trap ■
With disposal connection DN 50 and ■
Storz B coupling R 2“Suction and disposal sump with de- ■
watering socket R 1“Odour-tight maintenance opening, ■
diameter: 450 mmInlet and drainage connections in accor- ■
dance with EN 877System ACO Passavant ■
Official approval Z-54.6-363 �
Ordering information
Nominal size
Capacity Weight Article No.
Sludge trap Grease storage Total capacity Empty Full[l] [l] [l] [kg] [kg]
NS 2 210 80 480 75 555 3802.50.00NS 4 420 160 880 115 995 3804.50.00
Dimensions
disposal connection with Storz-B-coupling R 2 DIN 14308
inletDN 100 outlet
DN 100
Ø 1
10
min
500
1005
1360
935
L 2
L 1
a b
700
maintenance opening
Nominal size DimensionsL1 L2 A B
[mm] [mm] [mm] [mm]NS 2 1180 1360 510 660NS 4 2070 2250 945 1115
508
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalDivided shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Accessories
Designation compatible with Description Article No.
li. Ø455
525
68
221
625
Sampling pot DN 100
Grease separator Eco-Jet/ ■
HydrojetNS 1 – 4 �
Starch separator Fapurat-PE ■
NS 0.5 – 1 �
For installation in horizontal pi- ■
pes DN 100 after the separator plantCurved shape, with ■
Socket seal (material SBR) �on the inlet and pipe spigot on the drainOdour tight maintenance �opening DN 450
Weight: 7 kg ■
3300.09.11
li. Ø455
525
221
55544370
Sampling pot DN 100
Grease separator Eco-Jet/ ■
HydrojetNS 1 – 4 �
Starch separator Fapurat-PE ■
NS 0.5 – 1 �
For installation in vertical pipes ■
DN 100 after the separator plantCurved shape, with ■
Socket seal (material SBR) �on the inlet and pipe spigot on the drainOdour tight maintenance �opening DN 450
Weight: 7 kg ■
3300.10.11
li. Ø 455
525 18
8221
625
Coarse trap DN 100
Grease separator Eco-Jet/ ■
HydrojetNS 1 – 4 �
Starch separator Fapurat-PE ■
NS 0.5 – 1 �
For installation in horizontal ■
pipes DN 100 in front of the separator plantsCurved shape, with ■
Socket seal (material SBR) �on the inlet and pipe spigot on the drainStainless steel cage, material �grade 316 for retention of coarse materialsOdour tight maintenance �opening DN 450
Weight: 14 kg ■
3667.00.04
350
620
Kugel-hahn
Druck-minderer
Schmutz-fänger
Ø11
0
Rohrverbinder
Filling unit Eco-Jet G/GD ■
For installation in front of the ■
separatorStainless steel, material grade ■
316Consisting of ■
Pipe sockets DN 100 �Length: 300 mm �Filling unit with welded odour �seal and R ¾ ball valve
With pressure reducer ■
1 pipe connector DN 100 ■
0153.06.76
Ø12
0Ø
110
15
Ø13
380
176
140
10 Inlet valve DN 100Waste water lifting plants ■
Polyethylene grease separator ■
Polyethylene starch separator ■
PVC ■
Construction length: 176 mm ■
Weight: 2.75 kg ■
0175.13.84
509
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – complete disposalDivided shape – polyethylene (HD-PE)
Separator Grease separator Free-standing installation
Designation compatible with Description Article No.
Bohrung Ø40
370
Entsorgungsanschluss
300
Connection box
Eco-FPI with direct suction ■
Eco-Jet OD/RD/GD ■
Lipurex OD/RD ■
Hydrojet OS/OSE/RS/RSE ■
Lipurat OS/OSE/RS/RSE ■
For disposal connection DN 80 ■
Stainless steel, material grade ■
304Design „refinements“ ■
Door stop ■
Right or left �Door is lockable �
Dimensions ■
(width x height x depth) 370 x 330 x 250 mmWeight: 8 kg ■
7601.80.22
25
331
421
381
371
Flush-mounted frame Connection box ■
7601.80.22 �
Stainless steel, material grade ■
304Dimensions ■
(width x height x depth) 421 x 381 x 25 mm
7601.80.23
Sed tat. Ulput volenis nit atie facipisi.
510
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – partial disposalStainless steel (material grade 304)
Separator Grease separator Free-standing installation
Lipator – manual operation
Product information
ACO product advantages
Disposal without interruption in ■
operationOptimally suited for installation in ■
rooms with no direct access for dispo-sal vehiclesIdeal for use in conjunction with wet ■
waste disposal plants
Fresh grease separator plant in accor- ■
dance with EN 1825 and DIN 4040-100For installation in frost-protected rooms ■
With integrated sludge trap ■
Stainless steel cabinet and lower sec- ■
tion, material grade 304Heating element and additional thermal ■
insulation for fat homogenization230 V/1.5 kW �
Inlet and drainage connections in accor- ■
dance with EN 877
With ball valve DN 50 for fat and sludge ■
draw-offCollector tank for grease and sediment ■
sludgeCapacity: 60 l �
Cover and hose connection ■
2 replacement containers with cover ■
Capacity: 60 l �
Agitating device with 1 phase AC motor ■
in lower housing section230 V/90 W �
Manual membrane pump for pressure ■
boost for grease removalElectrical connection ■
230 V �
50/60 Hz �
1.6 kW �
System ACO Passavant ■
Official approval Z-54.6-163 (for NS 2 �
– 15)Official approval Z-54.1-452 (for �
NS 20)
Ordering information
Nominal size Nominal width
Total capa-city
Weight Largest individual compo-nent
Article No.
Empty Full Diameter x Height
Heaviest individual
component[l] [kg] [kg] [mm] [kg]
NS 2 DN 100 220 130 350 680 x 1050 85 7672.30.00NS 4 DN 100 880 376 1256 1380 x 800 70 7674.30.00NS 7 DN 150 880 379 1259 1380 x 800 70 7677.30.00
NS 10 DN 150 2080 591 2671 1830 x 600 95 7680.30.00NS 15 DN 200 2080 591 2671 1830 x 600 95 7685.30.00NS 20 DN 200 2080 640 2725 1830 x 600 115 7690.30.00
511
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – partial disposalStainless steel (material grade 304)
Separator Grease separator Free-standing installation
Dimensions
agitating device drive
inletDN ...
outletDN ...
min
500
A
B
ca. G
CF
E
D
grease draw-off
sludge draw-off
bottom outletmanual membrane pump
stop valve
sludge collecting space
grease collecting space
heating rod
insulating covers
connection ventilation,cleaning cap
switch box
ventilationbridge
sludge collecting container
grease collecting container
note:arrangement of the collecting containerscan be turned around the center of the facility
inletDN ...
outletDN ...
Nominal size DimensionsL L1 L2 L3 H H1 H2
[mm] [mm] [mm] [mm] [mm] [mm] [mm]NS 2 1100 680 260 700 1750 1305 1235NS 4 2150 1380 550 900 2050 1600 1450NS 7 2150 1380 550 900 2050 1600 1530
NS 10 2800 1850 750 1000 2350 1900 1750NS 15 2800 1850 750 1000 2350 1900 1830NS 20 3000 1850 750 1000 2350 1900 1830
512
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – partial disposalStainless steel (material grade 304)
Separator Grease separator Free-standing installation
Lipatomat – automatic control
Product information
ACO product advantages
Automatic controlled grease and ■
sludge draw-off without interruption in operationOptimally suited for installation in ■
rooms with no direct access for dispo-sal vehiclesIdeal for use in conjunction with wet ■
waste disposal plants
Fresh grease separator plant in accor- ■
dance with EN 1825 and DIN 4040For installation in frost-protected rooms ■
With integrated sludge trap ■
Stainless steel cabinet and lower sec- ■
tion, material 1.4031Heating element and additional thermal ■
insulation for fat homogenization230 V/1.5 kW �
Inlet and drainage connections in accor- ■
dance with EN 877With electrical ball valve DN 50 for fat ■
and sludge draw-off
Collector tank for grease and sediment ■
sludgeCapacity: 60 l �
Cover and hose connection ■
2 replacement containers with cover ■
Capacity: 60 l �
Agitating device with 1 phase AC motor ■
in lower housing section230 V/90 W �
Grease layer thickness measurement ■
Control of agitating device ■
Vat fill-level measurement ■
Program control with centralised fault ■
signal for ZLTFilling unit with solenoid valve for sup- ■
porting sludge and grease draw-offElectrical connection ■
230 V �
50/60 Hz �
1.6 kW �
System ACO Passavant ■
Official approval Z-54.6-163 (for NS 2 �
– 15)Official approval Z-54.1-452 (for �
NS 20)
Ordering information
Nominal size Nominal width
Total capa-city
Weight Largest individual compo-nent
Article No.
Empty Full Diameter x Height
Heaviest individual
component[l] [kg] [kg] [mm] [kg]
NS 2 DN 100 220 130 350 680 x 1050 85 7672.60.00NS 4 DN 100 880 361 1241 1380 x 800 70 7674.60.00NS 7 DN 150 880 363 1243 1380 x 800 70 7677.60.00
NS 10 DN 150 2080 605 2685 1830 x 600 95 7680.60.00NS 15 DN 200 2080 605 2685 1830 x 600 95 7685.60.00NS 20 DN 200 2080 640 2725 1830 x 600 115 7690.60.00
513
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – partial disposalStainless steel (material grade 304)
Separator Grease separator Free-standing installation
Dimensions
agitating device drive
min
500
A
B
ca. G
C
F
E
D
automatic grease draw-off
automatic sludge draw-off
bottom outlet
stop valve
sludge collecting space
grease collectingspace
heatingrod
insulating covers
filling device with solenoid valveand pressure regulator
switc
h bo
x
ventilationbridge
sludge collecting container
grease collecting container
note:arrangement of the collecting containerscan be turned around the center of the facility
inletDN ...
outletDN ...
grease sensor
connection ventilation,cleaning cap
inletDN ...
outletDN ...
Nominal size DimensionsL L1 L2 L3 H H1 H2
[mm] [mm] [mm] [mm] [mm] [mm] [mm]NS 2 1100 680 260 700 1750 1305 1235NS 4 2150 1380 550 900 2050 1600 1450NS 7 2150 1380 550 900 2050 1600 1530
NS 10 2800 1850 750 1000 2350 1900 1750NS 15 2800 1850 750 1000 2350 1900 1830NS 20 2800 1850 750 1000 2350 1900 1830
514
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – partial disposalStainless steel (material grade 304)
Separator Grease separator Free-standing installation
Accessories
Designation compatible with Description Article No.
Ø323
295
57
127
480
Sampling pipe DN 100
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 1 – 4 �
Starch separator Fapurat ■
NS 0.5 – 1 �Light-oil separator Coalisator- ■
R/-RDNS 3 �
Stainless steel, material grade ■
316Curved design ■
Gradient: 70 mm ■
For installation in horizontal ■
pipes DN 100 behind the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 13 kg ■
7300.09.10
Ø323
395
82
152
480
Sampling pipe DN 150
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 5.5 – 10 �
Starch separator Fapurat ■
NS 2 �Light-oil separator Coalisator- ■
R/-RDNS 6 – 10 �
Stainless steel, material grade ■
316Curved design ■
Gradient: 70 mm ■
For installation in horizontal ■
pipes DN 150 behind the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 14 kg ■
7300.09.20
Ø323
395
107
177
480
Sampling pipe DN 200
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 15 – 20 �
Light-oil separator Coalisator-E ■
NS 20 �
Stainless steel, material grade ■
316Curved design ■
Gradient: 70 mm ■
For installation in horizontal ■
pipes DN 200 behind the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 15 kg ■
7300.09.30
Ø323
355
127
60 320405
Sampling pipe DN 100
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 1 – 4 �
Starch separator Fapurat ■
NS 0.5 – 1 �Light-oil separator Coalisator- ■
R/-RDNS 3 �
Stainless steel, material grade ■
316Curved design ■
For installation in vertical pipes ■
DN 100 behind the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 13 kg ■
7300.10.20
Ø323
455
152
60 320405
Sampling pipe DN 150
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 5.5 – 10 �
Starch separator Fapurat ■
NS 2 �Light-oil separator Coalisator- ■
R/-RDNS 6 – 10 �
Stainless steel, material grade ■
316Curved design ■
For installation in vertical pipes ■
DN 150 behind the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 14 kg ■
7300.15.20
Ø323
455
177
60 320405
Sampling pipe DN 200
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 15 – 20 �
Light-oil separator Coalisator-E ■
NS 20 �
Stainless steel, material grade ■
316Curved design ■
For installation in vertical pipes ■
DN 200 behind the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 15 kg ■
7300.16.20
515
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – partial disposalStainless steel (material grade 304)
Separator Grease separator Free-standing installation
Designation compatible with Description Article No.
Ø323
295
57
127
480
Coarse trap DN 100
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 1 – 4 �
Starch separator Fapurat ■
NS 0.5 – 1 �
Stainless steel, material grade ■
316Curved design ■
Gradient: 70 mm ■
For installation in horizontal ■
pipes DN 100 in front of the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 15 kg ■
7300.09.70
Ø323
395
82
152
480
Coarse trap DN 150
Grease separator Lipurex/Lipu- ■
rat/Lipator/LipatomatNS 5.5 – 10 �
Starch separator Fapurat ■
NS 2 �
Stainless steel, material grade ■
316Curved design ■
Gradient: 70 mm ■
For installation in horizontal ■
pipes DN 150 in front of the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 16 kg ■
7300.09.80
Ø323
395
107
177
480
Coarse trap DN 200Grease separator LipurexLipu- ■
rat/Lipator/LipatomatNS 15 – 20 �
Stainless steel, material grade ■
316Curved design ■
Gradient: 70 mm ■
For installation in horizontal ■
pipes DN 200 in front of the separatorWith pipe connector and tempo ■
clutchConnections in accordance with ■
EN 877Weight: 17 kg ■
7300.09.90
580
Ø380
Spare vat Grease separator ■
Lipator/Lipatomat �
Vat ■
Volume: 60 l �With cover and tension ring ■
Height: c. 630 mm ■
Diameter: c. 380 mm ■
Weight: 5 kg ■
7600.00.15
516
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – system solutionSuspension equipment
Separator Grease separator Free-standing installation
Upstream container mono
Product information
ACO product advantages
Low turbulence waste water feed to ■
the grease separator plant (displace-ment pump)Low energy consumption ■
Safe pump pneumatic level switching ■
Increased operational safety via air ■
bubble injection
Application ■
Low inlet connection in front of the �
grease separator plantFor installation in rooms ■
Polyethylene collector tank Material ■
HD-PEUseable volume: 260 l �
Compact delivery unit/features ■
Collector tank with inlet socket ■
Suction connecting flange �
Ventilation connection port DN 100 �
Fresh-water connection socket R 1 � ½“Maintenance opening with plug cap �
Locked odour-tight �
Diameter: 350 mm �
Filter insert located after inlet �
Mounting material, measuring tube �
long/short to the pneumatic level switching
With 1 eccentric spiral pump (2 – ■
10 l/s)
Pressure pipe with special mounting ■
pieceBackflow valve �
Mini compressor for air bubble injec- �
tion with fitting materialControl line for pneumatic level �
switchingControl box/features ■
Electrical connection: 400 V/50 Hz �
Protection category IP 54 �
Dimensions: 380 x 300 x 210 mm �
(width x height x depth)Plug in, 1.5 m cable with CEE 5 pole �
plugCoated steel (RAL 7032) wall-moun- �
ted cabinetTime-lag fuse according to on-site �
conditionsOperation via key/bosh light toggle �
switch elementDisplay via direction of turn control, �
high alarm and 2 malfunction illumi-nated pushbuttons with cut off and reset functionPneumatic level switching via memb- �
rane pressure switchThermal motor fuse monitoring of �
pumpsError signals, visual and acoustic �
Dry contact centralised fault signal �
and pump operating signal
Ordering information
Type Nominal width
P1 Current con-sumption
1 m Weight Article No.
Empty Full[kW] [A] [l/s] [kg] [kg]
2 DN 100 1,5 16 2 275 675 0175.26.634 DN 150 3 16 4 335 735 0175.26.657 DN 150 5,5 16 7 345 745 0175.26.67
10 DN 150 5,5 16 10 370 770 0175.26.69
517
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – system solutionSuspension equipment
Separator Grease separator Free-standing installation
Dimensions
Exzenter-schnecken-pumpe
Entlüftung DN100 / SML(über Dach geführt)
Frischwasser-anschlussR 1 1/2
Messrohr langmit Lufteinperlung(Aus, P1 ,Alarm)
Zulauf DN * PE-Muffe
Schraubdeckel SG 385mit Gewindering LW 350
mittels mitgelieferterSchrauben und Dübelauftriebsicher verankern
Zulauf DN * PE-Muffe
Spezial - Befestigungsstückzum elastischen Anschlussder Druckleitung
Rückflussverhinderer
Flanschbogen
Alarm
AusNLZ
EinPumpe1
Sieb-einsatz
Lüftungsanschluss DN 100
Schaltkasten steckerfertig
KleinstkompressorSteuerleitungen derpneumatischen Niveauschaltung
B
L
D 1
H 2
H 1
H Z
H S
H D
300
380 x 210
Ø108 - 114
Type DimensionsL B1 Individu-
al com-ponent
diameter
H1 H2 H3 H4 H5
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]2 1180 1540 850 900 1060 730 770 1604 1180 1730 850 900 1060 730 800 1907 1230 1870 850 900 1060 730 855 215
10 1230 1870 850 900 1060 730 855 215
518
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – system solutionSuspension equipment
Separator Grease separator Free-standing installation
Upstream container duo
Product information
ACO product advantages
Low turbulence waste water feed to ■
the grease separator plant (displace-ment pump)Low energy consumption ■
Safe pump pneumatic level switching ■
Increased operational safety via air ■
bubble injection
Application ■
Low inlet connection in front of the �
grease separator plantFor installation in rooms ■
Polyethylene collector tank Material ■
HD-PEUseable volume: 200 l ■
Compact delivery unit/features: ■
Collector tank with inlet socket ■
Suction connecting flange �
Ventilation connection port DN 100 �
Fresh-water connection socket R 1 � ½“Maintenance opening with plug cap �
Locked odour-tight �
Diameter: 350 mm �
Filter insert located after inlet �
Mounting material, measuring tube �
long/short to the pneumatic level switching
With 2 eccentric spiral pumps ■
Consolidated pressure pipe with special ■
mounting pieceMini compressor for air bubble injec- �
tion with fitting materialControl line for pneumatic level �
switchingControl box/features ■
Electrical connection: 400 V/50 Hz �
Protection category IP 54 �
Dimensions: 380 x 600 x 210 mm �
(width x height x depth)Plug in, 1.5 m cable with CEE 5 pole �
plugCoated steel (RAL 7032) wall-moun- �
ted cabinetTime-lag fuse according to on-site �
conditionsOperation via 2 key/screen light �
toggle switch elementsDisplay via direction of turn control, �
high alarm and 2 malfunction illumi-nated pushbuttons with cut off and reset functionPneumatic level switching via memb- �
rane pressure switchThermal motor fuse monitoring of �
pumpsError signals, visual and acoustic �
Dry contact centralised fault signal �
and pump operating signal
Ordering information
Type Nominal width
P1 Current con-sumption
1 m Weight Article No.
Empty Full[kW] [A] [l/s] [kg] [kg]
2 DN 100 1,5 16 2 360 760 0175.25.954 DN 150 3 16 4 480 880 0175.25.977 DN 150 5,5 32 7 500 900 0175.25.99
10 DN 150 5,5 32 10 550 950 0175.26.01
519
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – system solutionSuspension equipment
Separator Grease separator Free-standing installation
Dimensions
Exzenter-schneckenpumpe
EntlüftungDN 100 / SML(über Dach geführt)
Frischwasser-anschlussR 1 1/2Messrohr kurz(Alarm)
Messrohr langmit Lufteinperlung( Aus , P 1 , P 2 )
Zulauf DN * PE-Muffe
Schraubdeckel SG 385mit Gewindering LW 350
mittels mitgelieferterSchrauben und Dübelauftriebsicher verankern
EinPumpe 1
EinPumpe 2
AusNLZ
Alarm
Zulauf DN * PE-Muffe Flansch - T - Stück
Anschluss für gemeinsameDruckleitung
Spezial - Befestigungsstückzum elastischen Anschlussder Druckleitung
Rückflussverhinderer
Flanschbogen
Flanschbogen
Flansch-Zwischenstück
Siebeinsatz
Lüftungsanschluss DN 100
Schaltkasten steckerfertig
Kleinstkompressor
Steuerleitungen derpneumatischen Niveauschaltung
B
L
Ø D 1
H 2
H 1
H Z
H S
H D
600
380 x 210
Ø108 - 114
Type DimensionsL B1 Individu-
al com-ponent
diameter
H1 H2 H3 H4 H5
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]2 1560 1410 850 900 1060 730 1120 1604 1750 1420 850 900 1060 730 1150 1907 1870 1520 850 900 1060 730 1240 215
10 1870 1520 850 900 1060 730 1240 215
520
Gre
ase
sep
arat
or
Free
-sta
nd
ing
in
stal
lati
on
10
K9/1
Grease separator – system solutionSuspension equipment
Separator Grease separator Free-standing installation
Accessories
Designation compatible with Description Article No.
Hupe„AUS“
Störung
Test
Summer
116 (60 T)
116
Signal device (network dependent)
Automatic faeces backflow ■
systems Quatrix-K Type 3FSinkamat-S/-Z ■
Muli polyethylene duo ■
Muli polyethylene S mono/duo ■
All Multi-Pro waste water lifting ■
plantsSuspension plant mono/duo ■
Visual and acoustic ■
Network dependent ■
Without pickup ■
With dry contact for fault signal ■
levelWith 1 m connecting cable and ■
angled three-wire plug
0159.12.30
Hupe„AUS“
Störung
Test
Summer
116 (60 T)
116
Signal device (network independent)
Automatic faeces backflow ■
systems Quatrix-K Type 3FSinkamat-S/-Z ■
Muli polyethylene S mono/duo ■
All Multi-Pro waste water lifting ■
plantsSuspension plant mono/duo ■
Visual and acoustic ■
Self-charging ■
Without pickup ■
With dry contact for fault signal ■
levelWith acoustic deletion ■
With 1 m connecting cable and ■
angled three-wire plug
0159.12.31