Post on 20-Jan-2016
transcript
CIMON PLCCIMON PLC
KDT Systems Co., Ltd.KDT Systems Co., Ltd.
KDT SYSTEMSKDT SYSTEMS
Sequence program and network are fully compatible between CIMON PLC series
XP1(Expansible)
CIMON PLC Line-Up
200 nsCompact Size
High speed (200 ns)Supports ethernet (Option)
BP16M(N.E.)
BP32M(Expansible)
BP Series (Block Type)for small size control panel
CP Series (Modular)Medium size control system
XP Series (Modular)Large size control system
15 128 384 1024 2048 4096 8192
CP4(N.E.)
CP3(Expansible)
XP3(Expansible)
XP2(Expansible)
4 K
16 K
64 K
8 K
32 K
128
K
IO Capacity
Pro
gram
Cap
acity
(S
teps
)
75 ns with floating point arithmeticSupports redundant system configuration
Ø CP-XP share the same I/O and special function modules.
Ø An innovative base expansion with high speed communication.
Ø Provides various type of special function modules. (Loadcell, Thermistor etc.)
Ø CPU embedded PID
N.E. : Not expansible
KDT SYSTEMSKDT SYSTEMS
Why CIMON PLCs ?Why CIMON PLCs ?
All CPU share the same programming environment (CICON)All CPU share the same programming environment (CICON)• No additional training needed for up/down sizing of control systemNo additional training needed for up/down sizing of control system• Though BP series are small sized PLC, they inherit powerful functionalitieThough BP series are small sized PLC, they inherit powerful functionalitie
s from higher series of CIMON PLCs (CP/XP)s from higher series of CIMON PLCs (CP/XP)
XP
CP BP
XP
CP BP
KDT SYSTEMSKDT SYSTEMS
Why CIMON PLCs ?Why CIMON PLCs ?
CP and XP CPU share the same modulesCP and XP CPU share the same modules• I/O modules, special function modules, power, base ....I/O modules, special function modules, power, base ....• Provides big merit on maintenance as well as cost.Provides big merit on maintenance as well as cost.
CP XPCP XP
KDT SYSTEMSKDT SYSTEMS
Why CIMON PLCs ?Why CIMON PLCs ?
Fully verified network compatibility Fully verified network compatibility • not only between PLCsnot only between PLCs• but also SCADA and Panels (TOUCH, XPanel)but also SCADA and Panels (TOUCH, XPanel)
XP
CP BP
케이블
XP
CP BP
케이블
KDT SYSTEMSKDT SYSTEMS
What is different ? : What is different ? : TechnologiesTechnologies
How many PLC manufacturers support How many PLC manufacturers support redundant system in all around the world ?redundant system in all around the world ?• CIMON supports redundant PLC CPU system.CIMON supports redundant PLC CPU system.• and we have some good references as power plant.and we have some good references as power plant.
System Comm.
Expansion #1
KDT SYSTEMSKDT SYSTEMS
Redundant CPU DetailsRedundant CPU Details
General Comm. (SC02A, EC01A etc.)
System Comm. (CM1-RC01A)
Operator Interface (CM1-RM01A)
CPU (CM1-XP1R)
Power (CM1-SPR)
Base (BS05R, BS08R, BS10R)
Power Monitor (CM1-RPW)
KDT SYSTEMSKDT SYSTEMS
What is different ? : What is different ? : ExpansionExpansion
Innovative base expansion systemInnovative base expansion system• Provides easy engineering with simple cableProvides easy engineering with simple cable• Removes the distance limit between basesRemoves the distance limit between bases• Plays the same role of remote I/O, but faster.Plays the same role of remote I/O, but faster.• Expansible up to 16 basesExpansible up to 16 bases
Category 5, 10Base-T, Max 100m
KDT SYSTEMSKDT SYSTEMS
CPU
EP02AEP02A 2 2 PortPort 10Mbps Ethernet10Mbps Ethernet
Expansion numner Expansion numner setup bysetup by rotaryrotary switchswitch
EP01AEP01A 1 1 PortPort 10Mbps Ethernet10Mbps Ethernet
LOCALLOCAL
EXPANSION #1EXPANSION #1
EXPANSION #2EXPANSION #2
EXPANSION #14EXPANSION #14
EXPANSION #15EXPANSION #15
EXPANSION #16EXPANSION #16
KDT SYSTEMSKDT SYSTEMS
What is different ? : What is different ? : EthernetEthernet
Take the internet on your fieldsTake the internet on your fields• Even BP supports the ethernet. (option)Even BP supports the ethernet. (option)• Remote maintenance by internet : The CICON can conRemote maintenance by internet : The CICON can con
nect with a PLC though internet.nect with a PLC though internet.
KDT SYSTEMSKDT SYSTEMS
What is different ? : CICONWhat is different ? : CICON
Dialog based configurationDialog based configuration• Removes DIP switches from special function modulesRemoves DIP switches from special function modules
Dialog based programmingDialog based programming• Generates sequence program automaticallyGenerates sequence program automatically• PID, Protocol, Network configurationsPID, Protocol, Network configurations• Special function card configurationsSpecial function card configurations
Thermistor, Loadcell, position (pulse output)Thermistor, Loadcell, position (pulse output)• Continued Continued .... ....
KDT SYSTEMSKDT SYSTEMS
Dialog based programmingDialog based programming
CPU SpecificationsCPU Specifications
KDT SYSTEMSKDT SYSTEMS
CPU Specification : XPCPU Specification : XPXP1RXP1R XP1AXP1A XP2AXP2A XP3AXP3A
Program Program MemoryMemory
128 Kstep 64 Kstep
I/O PointI/O Point 8192 4096 2048
USB / RTCUSB / RTC Yes
MemoryMemory D: 32000 Words / M,L,K: 16000 Points / T,C: 4096
RedundancyRedundancy Yes No
KDT SYSTEMSKDT SYSTEMS
CPU Specification : CPCPU Specification : CP
CP3P : Removable flash memoryCP3P : Removable flash memory
CP3ACP3A CP3BCP3B CP3PCP3P CP3UCP3U CP4ACP4A CP4BCP4B CP4CCP4C CP4DCP4D CP4UCP4U
PgmPgmMemMem 32 KStep 16 KStep
I/OI/O 1024 384
Data Data MemMem 10000 5000
RTCRTC No Yes No Yes
USBUSB No Yes No Yes
Comm.Comm. No No RS232C RS422/485
KDT SYSTEMSKDT SYSTEMS
CPU Specification : BPCPU Specification : BP
InputInput OutputOutput
BP32MDTBP32MDT
16
DC24V
16
Tr. Sink
BP32MDCBP32MDC Tr. Source
BP32MDRBP32MDR Relay
BP16MDTBP16MDT
8 7
Tr. Sink
BP16MDCBP16MDC Tr. SourceTr. Source
BP16MDRBP16MDR RelayRelay
KDT SYSTEMSKDT SYSTEMS
CPU Specification : BPCPU Specification : BP
BP32MBP32M Abundant program capaAbundant program capaccity:ity:
8,000 Step8,000 Step Device Range:Device Range:
Internal Relay: 4,096 PointsInternal Relay: 4,096 Points Data Memory: 5,000 Words Data Memory: 5,000 Words
Max. 3 block expansionMax. 3 block expansion
BP16MBP16M Abundant program capaAbundant program capaccity:ity:
44,000 Step,000 Step Device Range:Device Range:
Internal Relay: 4,0Internal Relay: 4,00000 Points Points Data Memory: Data Memory: 11,000 Words ,000 Words
NotNot expan expansisibleble
Basic ModulesBasic Modules
KDT SYSTEMSKDT SYSTEMS
PowerPower
SPASPA SPC/SPRSPC/SPR SP2BSP2B
Input VoltageInput Voltage AC 90~240V, 50/60HzAC 90~240V, 50/60Hz DC 24VDC 24V
Input CurrentInput Current 0.25A Max for 220VAC0.25A Max for 220VAC 1.8A Max1.8A Max
Inrush Inrush CurrentCurrent Less than 30ALess than 30A
Output Output Voltage/CurreVoltage/Curre
ntnt
+5V / 3.5A+5V / 3.5A
+24V / +24V / 0.5A0.5A
+5V / 3.5A+5V / 3.5A
+24V / +24V / 0.5A0.5A
+15V / +15V / 0.5A0.5A
-15V / 0.3A-15V / 0.3A
+5V / 3.5A+5V / 3.5A
+15V / +15V / 0.5A0.5A
-15V / 0.3A-15V / 0.3A
• SPA cannot be used with analog/temperature modules
KDT SYSTEMSKDT SYSTEMS
BaseBase
ModelModel I/O SlotsI/O Slots
CM1-BS03ACM1-BS03A 33
CM1-BS04ACM1-BS04A 44
CM1-BS05A/RCM1-BS05A/R 55
CM1-BS08A/RCM1-BS08A/R 88
CM1-BS10A/RCM1-BS10A/R 1010
CM1-BS12ACM1-BS12A 1212
KDT SYSTEMSKDT SYSTEMS
Digital InputDigital Input
XD16AXD16A
XD16BXD16B 16 16 DC 24V DC 24V InputInput Photo coupler Photo coupler
iissolation olation
XD32CXD32C
XD32BXD32B 3232 DC 24V DC 24V InputInput Photo coupler Photo coupler
iissolation olation
XA08AXA08A
XX AA08B08B 88 AC AC InputInput
XY16DRXY16DR 8 8 24Vdc Input24Vdc Input 8 8 Relay Relay Output Output
KDT SYSTEMSKDT SYSTEMS
Digital OutputDigital Output
YR16AYR16A 16 16 RelayRelay 2 Amp / 240VAC2 Amp / 240VAC
YS08AYS08A 88 SSRSSR 100~240Vac100~240Vac
YT16AYT16A
YT16BYT16B 16 16 Tr. Tr. OutOutputput 0.5A0.5A / 24V / 24V Sink /SourceSink /Source
YT32AYT32A
YT32BYT32B 3232 Tr. Tr. OutOutputput 0.2A 0.2A / 24V/ 24V Sink /SourceSink /Source
KDT SYSTEMSKDT SYSTEMS
Analog InputAnalog Input All settings are configured by CICONAll settings are configured by CICON
Input VoltageInput Voltage : 0 ~ 5V, 1 ~ 5V: 0 ~ 5V, 1 ~ 5V, , 0 ~ 10V, -10 ~10V 0 ~ 10V, -10 ~10V Input CurrentInput Current : : 0 ~ 20mA, 4 ~20mA0 ~ 20mA, 4 ~20mA
Resolution : 14 bitResolution : 14 bit Photocoupler isolatedPhotocoupler isolated
AD08VAD08V Voltage Input 8 Ch.Voltage Input 8 Ch.
AD08IAD08I Current Input 8Ch.Current Input 8Ch.
AD04VIAD04VI Voltage/Current Input 4 Ch. Voltage/Current Input 4 Ch. (configurable)(configurable)
KDT SYSTEMSKDT SYSTEMS
Analog OutputAnalog Output All settings are configured by CICONAll settings are configured by CICON
OutputOutput Voltage Voltage : -10 ~10V: -10 ~10V Output Current : Output Current : 4 ~20mA4 ~20mA
Resolution : 14 bitResolution : 14 bit Photocoupler isolated.Photocoupler isolated.
DA04VDA04V Voltage output 4 Ch.Voltage output 4 Ch.
DA08VDA08V Voltage output 8 Ch.Voltage output 8 Ch.
DA04IDA04I Current output 4 Ch.Current output 4 Ch.
DA08IDA08I Current output 8 Ch.Current output 8 Ch.
Special Function Special Function ModulesModules
KDT SYSTEMSKDT SYSTEMS
RTDRTD 44 ChannelChannelss All settings are configured by CICONAll settings are configured by CICON Resolution : 14 bitResolution : 14 bit
Real temp. value provided (in C, F)Real temp. value provided (in C, F) Resolution in Temp. : 0.1 CResolution in Temp. : 0.1 C Photo coupler iPhoto coupler issolatolateded
RD04ARD04A for Pt.100, JPt.100for Pt.100, JPt.100
RD04BRD04B for Pt.1000, JPt.1000for Pt.1000, JPt.1000
KDT SYSTEMSKDT SYSTEMS
ThermocouplerThermocoupler
TC04ATC04A 44 ChannelChannelss All settings are configured by CICONAll settings are configured by CICON Resolution : 14 bitResolution : 14 bit
Real temp. value provided (in C, F)Real temp. value provided (in C, F) Resolution in Temp. : 0.1 CResolution in Temp. : 0.1 C Photo coupler iPhoto coupler issolatolateded
KDT SYSTEMSKDT SYSTEMS
ThermistorThermistor
TH08ATH08A 8 8 ChannelsChannels All settings are configured by CICONAll settings are configured by CICON
includes resistance table inputincludes resistance table input Type : Type : NTCNTC thermistor thermistor Resolution : 14 bitResolution : 14 bit
Real temp. value provided (in C, F)Real temp. value provided (in C, F) Resolution in resistance :Resolution in resistance :
100Ω ~ 40kΩ : 1Ω100Ω ~ 40kΩ : 1Ω 40kΩ ~ 400kΩ: 10Ω40kΩ ~ 400kΩ: 10Ω 400kΩ ~ 1MΩ : 30Ω400kΩ ~ 1MΩ : 30Ω
KDT SYSTEMSKDT SYSTEMS
LoadcellLoadcellWG02AWG02A / / WG04AWG04A
2 2 oror 4 4 cchannelshannels loadcell input ( loadcell input ( ~ 3mV/V~ 3mV/V)) 1/21/20000,,000 resolution000 resolution Embedded batch process control (unloading/mixing/filling/bin)Embedded batch process control (unloading/mixing/filling/bin)
KDT SYSTEMSKDT SYSTEMS
High Speed CounterHigh Speed Counter
2 Channels2 Channels All settings are configured by CICONAll settings are configured by CICON
1-Phase input 1-Phase input oror 2-Phase input 2-Phase input 32 bit counter32 bit counter Speed : Max. 200 kPPSSpeed : Max. 200 kPPS Provides comparator output (<, =, >)Provides comparator output (<, =, >)
HS02BHS02B Voltage input signal (5, 12, 24 Vdc)Voltage input signal (5, 12, 24 Vdc)
HS02HS02DD
RS422A input signal level (Line RS422A input signal level (Line driver)driver)
KDT SYSTEMSKDT SYSTEMS
Pulse Output / PositioningPulse Output / Positioning
PS02APS02A 2 2 axisaxis Line driver pulse output (RS422A)Line driver pulse output (RS422A) All settings are configured by CICONAll settings are configured by CICON
Position parameter / tablesPosition parameter / tables Supports 2 axis linear/arc interpolationSupports 2 axis linear/arc interpolation Speed : Max. 1 MPPSSpeed : Max. 1 MPPS
CommunicationCommunication&&
Network Network
KDT SYSTEMSKDT SYSTEMS
Serial CommunicationSerial Communication Application ProtocolApplication Protocol
• HMI-ProtocolHMI-Protocol• MODBUS/RTU Slave & MasterMODBUS/RTU Slave & Master• DNP3.0DNP3.0• PLC Link : Max. 32 stationsPLC Link : Max. 32 stations• Loader (CICON) communicationLoader (CICON) communication
Supports modem connectionSupports modem connection Embedded RS232C-RS422/485 converterEmbedded RS232C-RS422/485 converter
SC01ASC01A RS232C 1 Ch.RS232C 1 Ch.
SC01BSC01B RS422/485 1 Ch.RS422/485 1 Ch.
SC02ASC02A RS232C 1Ch. + RS422/485 1 Ch.RS232C 1Ch. + RS422/485 1 Ch.
SC01DNPSC01DNP RS232C 1 Ch. (DNP 3.0 protocol)RS232C 1 Ch. (DNP 3.0 protocol)
KDT SYSTEMSKDT SYSTEMS
Typical Serial ApplicationTypical Serial Application
Plays a role of RS232C-RS485
Converter
RS422/485
CIMON HMI
Max. 32 StationsRS232C
KDT SYSTEMSKDT SYSTEMS
Remote Network by ModemRemote Network by Modem
Modem
Modem
RS422/485
CIMON HMI
Max 32 Stations
Leased Line Modem (DSU)
orDial-Up Modem
KDT SYSTEMSKDT SYSTEMS
EthernetEthernet
No limit on number of EC01A with a No limit on number of EC01A with a CPUCPU
Application ProtocolApplication Protocol• HMI-Protocol, MODBUS/TCP, DNP3.0HMI-Protocol, MODBUS/TCP, DNP3.0• PLC Link : Max. 64 stationsPLC Link : Max. 64 stations• Loader (CICON) communicationLoader (CICON) communication
Protocol StackProtocol Stack• ARP, ICMP, IP, UDP, TCPARP, ICMP, IP, UDP, TCP
10BaseT, 10 Mbps10BaseT, 10 Mbps
KDT SYSTEMSKDT SYSTEMS
HMI Link by EthernetHMI Link by Ethernet
CIMON HMI
Hub
No limit on number of station
KDT SYSTEMSKDT SYSTEMS
PLC Link by EthernetPLC Link by Ethernet
< PLC L ink (Ethernet ) >
Max. 64 Stations
HubHub
KDT SYSTEMSKDT SYSTEMS
Data LoggerData Logger
LG32ALG32A / / LG64ALG64A Data log buffer for PLCData log buffer for PLC
Logged data are retained in PLC while communication fail.Logged data are retained in PLC while communication fail. All logged data are transmitted to SCADA after communication recover.All logged data are transmitted to SCADA after communication recover.
Embedded communicationEmbedded communication Protocol : Protocol : HMI HMI ProtocolProtocol Port : Port : RS232RS232C (supports cable / dial-up modem)C (supports cable / dial-up modem)
Internal non-volatile log memoryInternal non-volatile log memory : : 32 MB / 64MB32 MB / 64MB
BP Series BP Series Expansion BlocksExpansion Blocks
KDT SYSTEMSKDT SYSTEMS
Expansion block naming : Expansion block naming : BPBP
CM2 – BPCM2 – BP (1)(1) EE (2)(2) (3)(3)
Series Series NameName
Number of Number of PointsPoints
04, 16, 3204, 16, 32
Module TypeModule TypeE : ExpansionE : Expansion
Output TypeOutput TypeT: Digital TR T: Digital TR Output(Sink)Output(Sink)C: Digital TR Output(Src)C: Digital TR Output(Src)R: Digital Relay OutputR: Digital Relay OutputA: Analog OutputA: Analog OutputO: No OutputO: No Output
Input TypeInput TypeD: Digital DC D: Digital DC 24V 24V InputInputA: Analog InputA: Analog InputR: RTD InputR: RTD InputT: TC InputT: TC InputO: No InputO: No Input
KDT SYSTEMSKDT SYSTEMS
Digital I/O ExpansionDigital I/O Expansion
ModuleModule InputInput OutputOutput
BP16EDTBP16EDT
BP16EDCBP16EDC
BP16EDRBP16EDR88
DC 24VDC 24V
88TR SinkTR Sink
TR SourceTR Source
RelayRelay
BP32EDTBP32EDT
BP32EDCBP32EDC
BP32EDRBP32EDR1616 1616
TR SinkTR Sink
TR SourceTR Source
RelayRelay
BP16EDOBP16EDO 1616 00 --
BP16EOTBP16EOT
BP16EOCBP16EOC
BP16EORBP16EOR00 -- 1616
TR SinkTR Sink
TR SourceTR Source
RelayRelay
KDT SYSTEMSKDT SYSTEMS
Analog ExpansionAnalog Expansion
ModuleModule InputInput OutputOutput
BP04EAOBP04EAO 44
Voltage/CurrentVoltage/Current00 --
BP04EAABP04EAA 22 22
Voltage/CurrentVoltage/Current
BP04E0ABP04E0A 00 -- 44
BP04EROBP04ERO 44RTD RTD
(Pt.100/JPt.100)(Pt.100/JPt.100) 00 --
BP04ETOBP04ETO 44 ThermocouplerThermocoupler 00 --
Analog module can be expanded up to 2 modules.Analog module can be expanded up to 2 modules.