CIS 191 - Lesson 10 Printers. CIS 191 - Lesson 10.

transcript

CIS 191 - Lesson 10

Printers

CIS 191 - Lesson 10

Two predominate types of printers• Thermal inkjet technology• Laser, drum, toner technology

CIS 191 - Lesson 10

So many ways to hook them up …

Now:• Network• USB• Wireless (Bluetooth, IR)• PictBridge (USB based)

Back then:• Serial cable• Parallel printer cable

CIS 191 - Lesson 10

PrinterConfiguration

CIS 191 - Lesson 10

System V based print subsystem• lp (to print)• lpstat (queue management)• cancel (to remove jobs)

BSD based print subsystem• lpr (to print)• lpq (queue management)• lprm (to remove jobs)

CUPS• Provides both System V and Berkeley based command-line interfaces• Supports new Internet Printing Protocol• Works with Samba

Printing

We will be just looking at CUPS

CIS 191 - Lesson 10

The service command will check the status and start

up the service.

CUPS has a web based administration tool which can

be reached on port 631.

CIS 191 - Lesson 10

ServiceConfiguration

CIS 191 - Lesson 10

Sidetrack – Service command

Not: the effects of the service command changes will last until the next shutdown .

They are not permanent.

CIS 191 - Lesson 10

Use the type and file

commands to find

the location and type

of commands

Sidetrack – Service command

The service command is a viewable shell script

(reduced type size here so it will fit)

CIS 191 - Lesson 10

CUPS is managed by a web-based configuration utility on port 631

Local access only by default

CIS 191 - Lesson 10

To enable remote access click on Administration tab …

CIS 191 - Lesson 10

… and scroll down to allow remote administration

CIS 191 - Lesson 10

Authenticate yourself as root to confirm change to allow remote administration

CUPS service will restart

CIS 191 - Lesson 10

CUPSBrowse to http://xxx.xxx.xxx.xxx:631/ from another system

You may now manage the CUPS service on Benji remotely from another system.

CIS 191 - Lesson 10

Printer: HP LaserJet 1320nConnection: LAN

Next step is to add printers

CIS 191 - Lesson 10

IP Address for this 1320n is 192.168.0.12

The LaserJets also have a web-based management utility

CIS 191 - Lesson 10

benji192.168.0.25

hp1320n192.168.0.12

This example will show how to add the HP 1320n as a networked printer.

CIS 191 - Lesson 10

To add in HP 1320N printer …

… the first step is to click the Add Printer button

CIS 191 - Lesson 10

You may get this error if your are browsing in remotely because no certificates have been set up for https protocol.

Not a problem if you are browsing locally

CIS 191 - Lesson 10

One way to address the certificate problem is to add an exception.

CIS 191 - Lesson 10

This adds the exception

CIS 191 - Lesson 10

Add an exception only when you do trust the site. In this case we built and setup the Benji VM so we trust it.

CIS 191 - Lesson 10

Click Confirm Security Exception button

CIS 191 - Lesson 10

Now we can add the LaserJet

CIS 191 - Lesson 10

Fill in basic information

CIS 191 - Lesson 10

We will use JetDirect.

JetDirect is a small printer server built into some of HP's printers.

CIS 191 - Lesson 10

Hmmm …. lets click on Network Printers link to figure this one out.

CIS 191 - Lesson 10

Scroll down to HP printers

CIS 191 - Lesson 10

We will use the JetDirect w/o IPP for the HP 1320n

IPP is Internet Printing Protocol for send print jobs over the Internet via the http protocol

HP JetDirect cards use port 9100

A socket is the combination of an IP address and a port number.

CIS 191 - Lesson 10

socket://192.168.0.12/9100

This defines how to communicate with the printer

CIS 191 - Lesson 10

(you will need to enter root's password)

Service will restart

CIS 191 - Lesson 10

Must select printer from long list

CIS 191 - Lesson 10

We will choose hp LaserJet 1320 series Postscript (recommended) (en)

CIS 191 - Lesson 10

Lets double check the printer supports PostScript … it does

CIS 191 - Lesson 10

To finally add the printer it will be necessary authenticate as root

CIS 191 - Lesson 10

Printer has been added

CIS 191 - Lesson 10

View of newly added printer from Printer tab

CIS 191 - Lesson 10

Lets test the printer by printing this CUPS web page to it … and it works.

CIS 191 - Lesson 10

Printer: hp photosmart 7550 (color inkjet technology)Connection: USB

Lets add second printer

CIS 191 - Lesson 10

Sidetrack – The previous 7550 "Hot Lips"

6 G's of acceleration8-pen turret

Grit wheel technology from HP Labs

CIS 191 - Lesson 10

benji192.168.0.25

hpdv2000192.168.0.27

The second printer is connected by USB to a Windows notebook computer

CIS 191 - Lesson 10

First step is the same which is to fill out basic information on printer

CIS 191 - Lesson 10

For this connection we will use Samba. Samba implements Windows file and print services sharing on Linux.

Note Windows uses SMB (Server Message Block) protocol to implement these services

CIS 191 - Lesson 10

Will need to specify the Windows print share

CIS 191 - Lesson 10

CUPSWill need to specify the Windows print share as //hostname/printsharename

CIS 191 - Lesson 10

Username and password Not requiredThis machine is in the same workgroup

smb://server/sharename

This machine is in a different workgroup

smb://workgroup/server/sharename

Username and password requiredThis machine is in the same workgroup smb://username:password@server/sharename

This machine is in a different workgroup

smb://username:password@workgroup/server/sharename

Ways to specify a Windows share

CIS 191 - Lesson 10

Select make of printer

CIS 191 - Lesson 10

Select model of printer

HP PhotoSmart 7550 Foomatic/hpijs (recommended) (en)

CIS 191 - Lesson 10

Printer has been added

CIS 191 - Lesson 10

Test new printer by printing its own management page

CIS 191 - Lesson 10

Printingin Linux

CIS 191 - Lesson 10

CUPSlpstat command

The –p option will show the available printers The –d option will identify the default printer

CIS 191 - Lesson 10

CUPSlp and lpr commands

Either command will print myfile to the selected printer

Note that both lp and lpr will read from stdin.

This allows output from another command to be piped in

CIS 191 - Lesson 10

CUPSconvert command

JPEG files need to be converted to postscript before printing with lp or lpr commands

Print job #28

CIS 191 - Lesson 10

ConfiguringCUPS

CIS 191 - Lesson 10

CUPSconfiguration file or command, or GUI

Must restart CUPS after changing configuration file with:service cups restart

Three ways to set the default printer – edit configuration file, command or GUI

[root@benji ~]# cat /etc/cups/printers.conf# Printer configuration file for CUPS v1.2.4# Written by cupsd on 2008-11-16 03:06<DefaultPrinter hp7550>Info hp photosmart 7550Location DenDeviceURI smb://hpdv2000/hp7550State IdleStateTime 1226791825Accepting YesShared YesJobSheets none noneQuotaPeriod 0PageLimit 0KLimit 0OpPolicy defaultErrorPolicy stop-printer

</Printer>

CIS 191 - Lesson 10

CUPSlpoptions command

The –d option will set the default printer. This will override the system default printer set using the web UI

CIS 191 - Lesson 10

ManagingPrintJobs

CIS 191 - Lesson 10

CUPSRejecting Jobs

Clicking the button on the web based utility will reject further jobs

CIS 191 - Lesson 10

CUPSStopping the Printer

Clicking the button on the web based utility will still allow jobs to be spooled

CIS 191 - Lesson 10

CUPSShowing jobs waiting to print

Use lpq or lpstat to show spooled print jobs

CIS 191 - Lesson 10

CUPSRemoving/canceling pending print jobs

Use lpq or lpstat to show the spooled print jobs

Use cancel or lprm to remove print jobs

CIS 191 - Lesson 10

Spool Files

CIS 191 - Lesson 10

CUPSSpool files in /var/spool/cups

Spooled print files are kept in pairs – one control file and one data file – in /var/spool/cups

Print job #27

CIS 191 - Lesson 10

CUPSSpool files in /var/spool/cups

The data file is ascii and the control file is binary when printing a text file

Print job #27

CIS 191 - Lesson 10

Exercise: CUPS

• Enable the CUPS service to run at system startup

• Turn on the CUPS service

• Create a "fake" printer and disable it.

• Practice printing to your fake printer.

CIS 191 - Lesson 10

wrap up

CIS 191 - Lesson 10

Commands:service - Manually control serviceschkconfig - Service startup configurationifconfig - Getting IP address

lp, lpr - Linux print commandcancel, lprm - cancel print joblpq, lpstat - Show print queuelpoptions - Show and change print optionsconvert - convert image file types

Files and Directories:/var/spool/cups - spooled print jobs/etc/cups - CUPS configuration files

Web:http://hostname:631 - CUPS web based management utilityhttp://hostname:9100 - HP JetDirect printer

CIS 191 - Lesson 10 Printers. CIS 191 - Lesson 10.

Documents