Post on 03-Apr-2018
transcript
7/28/2019 cita bentley bim overview.pdf
1/41
2
011BentleySystems,
Incorporated
Neville Glanville
Building Industry Sales Director
BIM Solutions from Bentley27th June 2012
7/28/2019 cita bentley bim overview.pdf
2/41
2011BentleySystems,
Incorporated
2 | WWW.BENTLEY.COM
Bentley Integrated Solutions
COMMUNICATIONS
BRIDGES CAMPUSESCADASTRE AND LAND
DEVELOPMENT
OIL AND GASELECTRIC ANDGAS UTILITIES FACTORIES
METALS ANDMINING
POWERGENERATION
ROADSWATER AND
WASTEWATERRAIL AND TRANSIT
BUILDINGS
7/28/2019 cita bentley bim overview.pdf
3/41
2011BentleySystems,
Incorporated
3 | WWW.BENTLEY.COM
Bentley Integrated Solutions
COMMUNICATIONS
BRIDGES CAMPUSESCADASTRE AND LAND
DEVELOPMENT
OIL AND GASELECTRIC ANDGAS UTILITIES FACTORIES
METALS ANDMINING
POWERGENERATION
ROADSWATER AND
WASTEWATERRAIL AND TRANSIT
BUILDINGS
7/28/2019 cita bentley bim overview.pdf
4/41
2011BentleySystems,
Incorporated
4 | WWW.BENTLEY.COM
Unified Building Information Modeling Application Encapsulates Architectural, Structural, Mechanical and
Electrical design disciplines and practices.
Represents the Next Version of all building
applications with significant added value and allintegrated together as a single application.
Includes the New Clash Detection capability asan integrated feature - no additional cost
AECOsim Building Designer
7/28/2019 cita bentley bim overview.pdf
5/41
2011BentleySystems,
Incorporated
5 | WWW.BENTLEY.COM
AECOsim Product Family
Deliver High Performance Buildingsthrough interdisciplinary buildingdesign, analysis, simulation and theproduction of high quality building andproject documentation.
AECOsim Energy SimulatorBuilding Energy Systems Simulation and Analysis
AECOsim Compliance Manager
Enterprise-Level LEED project management (SAS)
Architectural Structural
ElectricalMechanical/Plumbing
AECOsim Building DesignerInterdisciplinary Building Information Modeling
7/28/2019 cita bentley bim overview.pdf
6/41
2011BentleySystems,
Incorporated
6 | WWW.BENTLEY.COM
BIM application for Architecture Comprehensive and dedicated tools for every
type of building component
Embedded parameters, rules, and constraintsto capture design intent
Relationships and associativity betweenarchitectural elements for rapid designchanges
Automated placement of finishes to walls andcolumns
Suspended ceiling tools with space heightdetection option
Terrain modeling, roof, and stair builder tools Creation of coordinated floor plans, sections,
and elevations
Room and component schedules, quantity andcost calculation, specifications
AECOsim Building Designer: Architectural
7/28/2019 cita bentley bim overview.pdf
7/41
2011BentleySystems,
Incorporated
7 | WWW.BENTLEY.COM
AECOsim Building Designer: ArchitecturalFeatures
Heads up Display
DataGroups
Dynamic Views
Project Explorer
IFC 2x, 2x2, and 2x3 compliance
3D PDF & Google Earth support
export to gbXML for energy analysisintegration with Green Building Studio,Ecotect, Tranes TRACE 700, EDSLTAS, eQuest, DOE-2, IES, EnergyPlusand Carrier HAP
Publish to iModel for teamcollaboration and coordination
7/28/2019 cita bentley bim overview.pdf
8/41
2011BentleySyst
ems,
Incorporated
8 | WWW.BENTLEY.COM
BIM application for Structural
Structural design and constructiondocumentation for structures in steel,masonry, concrete, and timber
Parametric and feature-based structuraldesign
Create structural components of anycomplexity
Integrate design, analysis, anddocumentation
Reduce construction documentation
time Predict performance, quantities, and
costs
Avoid errors and omissions
AECOsim Building Designer: Structural
7/28/2019 cita bentley bim overview.pdf
9/41
2011BentleySyst
ems,
Incorporated
9 | WWW.BENTLEY.COM
Features Physical and analytical model
Interoperability with STAAD, RAM,Pro-Steel
CIS/2, SDNF, IFC data exchangefor fabrication
Analysis Round-tripping STAAD, RAM, ISM
Structural Detailing ProStructures
AECOsim Building Designer: Structural
7/28/2019 cita bentley bim overview.pdf
10/41
2011BentleySystems,
Incorporated
10 | WWW.BENTLEY.COM
BIM application for Mechanical
Design and construction documentationof air-handling and piping/plumbingsystems
Work in plan, elevation, isometric, orperspective view with the same tools
Automatic hook-up of diffusers andother components
Apply and change slope to partial orcomplete systems
Parametric, dimension-driven creation
and modification of mechanical andplumbing components
Access to component productmanufacturers with all part numbersand performance data for bills ofmaterial and analysis
AECOsim Building Designer: Mechanical
7/28/2019 cita bentley bim overview.pdf
11/41
2011BentleySystems,
Incorporated
11 | WWW.BENTLEY.COM
AECOsim Building Designer: MechanicalFeatures
dynamic duct routing and resizing
piping for fire protection and plumbing
sloped systems
construction fabrication
context sensitive component placement
manufacturer catalogs Propress, Lindab,Victaulic, Nibco
Interface with Hevacomp Design andanalysis tools
export to gbXML for energy analysisintegrating with Green Building Studio,Ecotect, Tranes TRACE 700, EDSL TAS,eQuest, DOE-2, IES, EnergyPlus andCarrier HAP
7/28/2019 cita bentley bim overview.pdf
12/41
2011BentleySystems,
Incorporated
12 | WWW.BENTLEY.COM
AECOsim Building Designer: ElectricalBIM application for Electrical
Professional electrical design solutionfor building services:
- Power distribution- Lighting- Fire alarm- Emergency lighting- Telecommunications- Information technologies- Security- Public address- Lighting protection
- Video- EIB- Other building services systems
7/28/2019 cita bentley bim overview.pdf
13/41
2011BentleySystems,
Incorporated
13 | WWW.BENTLEY.COM
AECOsim Building Designer: Electrical
Features
raceway cable tray, conduit, cable basket,busduct
circuit - length calculations
raceway - fill calculations
schedules - panel, circuit, luminaire, device
cable manager - circuit design
schematic diagrams - file alarm, security,power
Availability of Hevacomp Design tools integration with power analysis applications
EDSA (US NEC/ANSI/IEEE), AMTECHProDesign (BS 7671), elcoPower (DIN/VDE)
integration with lighting analysis solutions Lumen Designer, DIALux, Relux and Visual
Lighting layouts and circuitry
Design visualization
Systems sizing and reports
7/28/2019 cita bentley bim overview.pdf
14/41
2011BentleySystems,
Incorporated
14 | WWW.BENTLEY.COM
A stand-alone application
An extension to both AECOsim Building Designer V8iand MicroStation V8i
More mesh modeling tools and native DGN support
AECOsim Building Designer: GC
Computational design:find forms more fit forpurpose, explore infinitevariability, and do things
which were impossiblebefore.
HOKandPLP
Architectu
re
TheFrancisCrickInstitut
e,
London,U
K
-and-
Demo
http://localhost/var/www/apps/conversion/tmp/scratch_1/presentation%20material/GC/05%20-%20ABD%20and%20GC.avihttp://localhost/var/www/apps/conversion/tmp/scratch_1/presentation%20material/GC/05%20-%20ABD%20and%20GC.avi7/28/2019 cita bentley bim overview.pdf
15/41
2011BentleySystems,
Incorporated
15 | WWW.BENTLEY.COM
7/28/2019 cita bentley bim overview.pdf
16/41
2011BentleySystems,
Incorporated
16 | WWW.BENTLEY.COM
AECOsim Building Designer: Model Review
Clash Detection Model Review
3D PDF output
http://localhost/var/www/apps/conversion/tmp/scratch_1/Group.avihttp://localhost/var/www/apps/conversion/tmp/scratch_1/Navigator-Tocci-Mark-up-Sheet.avi7/28/2019 cita bentley bim overview.pdf
17/41
2011BentleySystems,
Incorporated
17 | WWW.BENTLEY.COM
Luxology Rendering Engine producesphoto-realistic renderings and animations
AECOsim Building Designer: Visualization
7/28/2019 cita bentley bim overview.pdf
18/41
2011BentleySystems,
Incorporated
18 | WWW.BENTLEY.COM
Model and the drawing derived fromthose models, each communicatedifferent information and at differentgranularities however they share acommon context. Hypermodelingunites these two separated volumes of
information around that commoncontext.
AECOsim Building Designer: Hypermodel
7/28/2019 cita bentley bim overview.pdf
19/41
2011BentleySys
tems,
Incorporated
19 | WWW.BENTLEY.COM
AECOsim Building Designer: Hypermodel
Nemours Childrens Health System in Orlando, FloridaStanley Beaman & Sears Architecture and Interiors in Atlanta, GeorgiaPerkins + Will Architects
Hypermodel Dataset
courtesy of:
7/28/2019 cita bentley bim overview.pdf
20/41
2011BentleySys
tems,
Incorporated
20 | WWW.BENTLEY.COM
AECOsim Building Designer: Quantities
7/28/2019 cita bentley bim overview.pdf
21/41
2011BentleySys
tems,
Incorporated
21 | WWW.BENTLEY.COM
Shadow Generatorproduces geometry thatrepresents the boundaries ofsolar shadows at a giventime allowing the solarimpact be definitively
evaluated at any instant oftime
Solar Exposure Calculatorproduces both solarradiation and shadowing
analysis over a user definedtime period
AECOsim Building Designer: Solar Analysis
7/28/2019 cita bentley bim overview.pdf
22/41
2011BentleySys
tems,
Incorporated
22 | WWW.BENTLEY.COM
The Point Clouds tools allow you to import, control,visualize and manipulate point cloud images.
The Point Cloud is treated as any standard element andcan be part of a model or level
Supports Multiple Point Cloud Formats(POD, BIN, CL3, FLS, FWS, LAS, PTG, PTS, PTX, 3DD, RDB, RXP, RSP, and XYZ)
AECOsim Building Designer: Point Clouds
7/28/2019 cita bentley bim overview.pdf
23/41
Data Collected Point Clouds from Laser Scan
http://localhost/var/www/apps/conversion/tmp/scratch_1/BSWPointCloudFinal.avihttp://localhost/var/www/apps/conversion/tmp/scratch_1/BSWPointCloudFinal.avihttp://localhost/var/www/apps/conversion/tmp/scratch_1/BSWPointCloudFinal.avihttp://localhost/var/www/apps/conversion/tmp/scratch_1/BSWPointCloudFinal.avi7/28/2019 cita bentley bim overview.pdf
24/41
2011BentleySys
tems,
Incorporated
24 | WWW.BENTLEY.COM
7/28/2019 cita bentley bim overview.pdf
25/41
2011BentleySys
tems,
Incorporated
25 | WWW.BENTLEY.COM
What is BIM?(from Bentley)
7/28/2019 cita bentley bim overview.pdf
26/41
2011BentleySys
tems,
Incorporated
26 | WWW.BENTLEY.COM
Building
Information
Modeling
7/28/2019 cita bentley bim overview.pdf
27/41
2011BentleySys
tems,
Incorporated
27 | WWW.BENTLEY.COM
Building
Information
Management
7/28/2019 cita bentley bim overview.pdf
28/41
2011BentleySys
tems,
Incorporated
28 | WWW.BENTLEY.COM
Building
Information
Mobility
7/28/2019 cita bentley bim overview.pdf
29/41
2011BentleySys
tems,
Incorporated
30 | WWW.BENTLEY.COM
Communication
HumanServices
Energy
Transportation
Water &Sewer
Land
Management
EconomicProduction
Integrated Intelligent Infrastructure
Design
Build
Operate
7/28/2019 cita bentley bim overview.pdf
30/41
2011BentleySystems,
Incorporated
31 | WWW.BENTLEY.COM
Integrated Intelligent Infrastructure
Design
Build
Operate
7/28/2019 cita bentley bim overview.pdf
31/41
2011BentleySystems,
Incorporated
32 | WWW.BENTLEY.COM
7/28/2019 cita bentley bim overview.pdf
32/41
2011BentleySystems,
Incorporated
33 | WWW.BENTLEY.COM
Civil Plant Building Geospatial
ERPSystems Other BusinessSystems
CPIC, AVANTIBS1192 2007User guides on each
CAD
2D 3D BIMsAIM
SIM
BSIM
BRIM
CIM
FIM
ISO BIM
IDM, IFC, IFD
iBIM
BuildingLifecycle
Management
Integrated, Interoperable dataModels, object basedcollaboration
Drawings of lines, arcs, texts etc
LEVEL 1LEVEL 0 LEVEL 2 LEVEL 3 c Bew & Richards 2008
Discipline ApplicationsMxRail
MicroStation
STAADAECOsim Building Designer
Bentley MapPromis-e
SewerCAD
InRoads
Hevacomp
ConstructSIM
AssetWiseeB InsightExorEnterprise Informatics
Configuration Management Change Management
AtlasInformation Manager
PROW
ProjectWiseProjectWise NavigatoriModel
Bentley View ProjectWise Lifecycle Server
ProjectWise Geospatial Management
Web Server
7/28/2019 cita bentley bim overview.pdf
33/41
2011BentleySystems,
Incorporated
34 | WWW.BENTLEY.COM
Graphics anddata
Secure SignedProvenance Accurate
Interoperability through i-models
SDK
PLUG-IN
COMPOSERVariable file formats and
their references
i-model files are much smaller
http://localhost/var/www/apps/conversion/tmp/scratch_1/Navigator-Tocci-Schedule.avihttp://localhost/var/www/apps/conversion/tmp/scratch_1/Navigator-Tocci-Schedule.avihttp://localhost/var/www/apps/conversion/tmp/scratch_1/Navigator-Tocci-Schedule.avi7/28/2019 cita bentley bim overview.pdf
34/41
2011BentleySystems,
Incorporated
35 | WWW.BENTLEY.COM
Interoperability through i-modelsArchitect
Bentley Architecture
Structural Engineer
Revit Structures
M&E Engineer
Civil Engineer
Power Civil
7/28/2019 cita bentley bim overview.pdf
35/41
2011BentleySystems,
Incorporated
36 | WWW.BENTLEY.COM
Interoperability through i-models
COMPOSER
Architect
Bentley Architecture
Structural Engineer
Revit Structures
M&E Engineer
Bentley Navigator
Visual Coordination
Dynamic Sections
Clash Detection
Model Interrogation
Extract Schedules
Construction Simulation
Civil Engineer
Power Civil
Sketchup3DS
Rhino
etc.
Design/BIM CoordinatorContractor
7/28/2019 cita bentley bim overview.pdf
36/41
2011BentleySystems,
Incorporated
37 | WWW.BENTLEY.COM
Interoperability through i-models
COMPOSER
Architect
Bentley Architecture
Structural Engineer
Revit Structures
M&E Engineer
View Models
Visual Coordination
View Documents
View Drawings
Model Interrogation
Civil Engineer
Power Civil
Sketchup3DS
Rhino
etc.
Client
7/28/2019 cita bentley bim overview.pdf
37/41
2011BentleySystems,
Incorporated
38 | WWW.BENTLEY.COM
Mobile Apps
7/28/2019 cita bentley bim overview.pdf
38/41
2011BentleySystems,
Incorporated
39 | WWW.BENTLEY.COM
Mobile Apps
7/28/2019 cita bentley bim overview.pdf
39/41
2011BentleySy
stems,
Incorporated
40 | WWW.BENTLEY.COM
Commitment to Interoperability
Interoperability PlatformWhite Paper
Embrace existing applications
Synchronize project information
Generate integrated views of
project information
Create dynamic deliverables
Utilize powerful client applicationsfor extracting value from projectinformation
www.bentley.com/interoperability
http://www.bentley.com/interoperabilityhttp://www.bentley.com/interoperability7/28/2019 cita bentley bim overview.pdf
40/41
2011BentleySy
stems,
Incorporated
41 | WWW.BENTLEY.COM
Availability for Education
Campus Subscription (Annual)
Free of Charge for Students
7/28/2019 cita bentley bim overview.pdf
41/41
2
011BentleySystems,
Incorpor
ated
Bentley BIM SolutionsThank you!
email: neville.glanville@bentley.com
t itt @ l