Post on 11-Dec-2015
description
transcript
Barras de inicio para el siguiente piso
Refuerzo superior
Refuerzo Superior adicional
Final de barra de refuerzo
Refuerzo inferior
EstribosEstribos dentro dela unión
Refuerzosuperior
RefuerzoSuperioradicional
Estribos
Barras de refuerzoinferior
PREDIMENSIONAMIENTO DE VIGAS
TIPOS DE VIGAS EN CONCRETO :
TIPOS DE VIGAS EN ACERO :
PREDIMENSIONAMIENTO DE VIGAS DE CONCRETO
CARACTERÍSTICAS DE LOS MATERIALES :
NORMATIVIDAD Y CÓDIGOS DE DISEÑO :
CARGAS ACTUANTES :
PREDIMENSIONAMIENTO DE VIGAS
Las vigas son elementos estructurales que soportan cargas verticales.
Las vigas transmiten las cargas a sus apoyos que pueden ser muros de apoyo, columnas u otras vigas a las que se unen.
h
b
VIGAS PRINCIPALES:
b= B/20 ≥ 0.25 m
h = Ln/α
Donde: B: Ancho tributario (m)Ln: Luz libre (m)
2. Losas Macizas.-
-Tramos simplemente
apoyados: h = L/15
Normalmente se usan hasta 10
metros de Luz.
- Tramos continuos: h = L/19 a L/24
Normalmente se usan hasta 15 metros
de Luz en el tramo mayor.
W s/c α
s/c ≤ 200 kg/cm2 12
200≤ s/c ≤ 350 kg/cm2 11
350≤ s/c ≤ 600 kg/cm2 10
600≤ s/c ≤ 750 kg/cm2 9
FACTOR PARA PREDIMENSIONAMIENTO DE VIGAS PRINCIPALES :
PREDIMENSIONAMIENTO DE VIGAS
h
b
VIGAS SECUNDARIAS:
b= 0.25 m
h = Ln / 14
Donde: B: Ancho tributario (m)Ln: Luz libre (m)
2. Losas Macizas.-
-Tramos simplemente
apoyados: h = L/15
Normalmente se usan hasta 10
metros de Luz.
- Tramos continuos: h = L/19 a L/24
Normalmente se usan hasta 15 metros
de Luz en el tramo mayor.