Class 2 Dimmable LED DC Magnetic...

Post on 01-Nov-2019

0 views 0 download

transcript

Toll Free 1 888-653-3533 - Tel. 514 448-1574OFFICE AND SHOWROOM6068 Metropolitain East, Montreal (Quebec) H1S 1A9

PROJECT NAME / No:

TYPE: QTY:

SPECIFICATION SHEET

PS-CV-120-24-4167mA-100W-DIMB-EN

Class 2 Dimmable LED DC Magnetic Transformer

Max Load 100 WInput Voltage 120 V AC, 60 HzOutput Voltage Full Load 22.0 V DCInput Current Full Load 1 AOpen Circuit Volts 24 VDCOutput Current Full LoadEf�ciency

4167mA91%

Coil Former Double Section BobbinThermal Class B 130 °CLeads Primary PVC 600 V #18Leads Secondary PVC 300 V #12

Dimensions in inches:Height 7.50”Width 3.13”Depth 2.94”

PS-CV-120-24-4167mA-100W-DIMB-EN

7-1/2”

8-1/2”

2-1

5/1

6”

3-1

/8”

Toll Free 1 888-653-3533 - Tel. 514 448-1574OFFICE AND SHOWROOM6068 Metropolitain East, Montreal (Quebec) H1S 1A9

PS-CV-120-24-4167mA-100W-DIMB-EN

Transformer

Input leads are 18 AWG. Output leads are 12 AWG. Lead insulation is 105 °C.The transformer uses a class B 130 °C insulation system.

EnclosureEnclosure temperature will not exceed 55°C @ 40 °C ambient.Wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors.The removable cover for the wiring compartment is secured in place by clips.The enclosure is black powder coated.

General • The transformer has a thermal 2A circuit breaker on the primary side and a 7A circuit breaker on the secondary side.• Controlled with a low-voltage dimmer.• Listed with ETL and tested to UL 1310 & CSA STD C22.2 #223.• NEMA 3R enclosure

PS-CV-120-24-4167mA-100W-DIMB-EN