Post on 31-Dec-2016
transcript
K-ETD Emergency Transfer Dial
Weldable Gate Boxes
Starting Page 27
Cylinder Guards Door Loops
K-GBJGate Box Installation Jig
K-18 Change Key Set #Tamper- Tamper Resistant Screwdriver
# U-HOLDUniversal Scope Holer
Page 10 Page 15 Pages 18-19
Page 10Page 12 Page 8Page 25
2
TABLE OF CONTENTS
Tools..........................................................................................................................Drill Bits.....................................................................................................................Roll Pins.....................................................................................................................Tamper Resistant Screws...........................................................................................Safe Products..............................................................................................................Aluminum Door Security (Style Guards)..................................................................Cylinder Guards.........................................................................................................Protect-A-Lok...........................................................................................................Installation Templates................................................................................................Door Loops.................................................................................................................Automotive Tools.......................................................................................................Retail Products...........................................................................................................Gate Box Tools...........................................................................................................Gate Box Related Products........................................................................................Blank Weldable and Universal Mortise Gate Boxes.................................................Single and Double Cylindrical Gate Boxes ..............................................................Understanding Gate Box Stock Numbers..................................................................Gate Box Cross Reference Guide..............................................................................Gate Box Photo Reference Guide.............................................................................Notes on ANSI Electric Strikes..................................................................................
At Keedex, “Ideas that Work” is our commitment to providing you with reliable and innovative products. Keedex Products are designed by security professionals who understand your needs. Keedex has established a reputation as a leading manufacturer of high quality products for the access control, safe, locksmith, and security hardware industries.If your distributor is out of stock on an item, or if it is a new item that they do not have in inventory yet, please do not hesitate to place your order with them. We have very short lead times, and we impose no minimum order requirements on your distributor for drop shipments.
Keedex sells products exclusively through distribution.
3-9678-910-131415161718-1920-2122-2324-2526-27, 3636273628-3537-4747
Limited Warranty –Keedex, Inc. warrants that its products will be free from defects in materials and workmanship (excluding oxidation or discoloration) for a period of one year from the date of sale to the user. Our only obligation will be to replace the defective product or parts upon inspection, together with proof of purchase from one of our agents dated within the warranty period.We assume no liability for any labor charges regarding the removal or reinstallation of the products; nor will any freight, postage or handling expense relative to the product be covered. Damage caused by accident, misuse, abuse or improper installation are not covered by this warranty. Except as expressly stated herein, there is no warranty, whether expressed or implied, provided by Keedex, Inc. No other person has authority to assume any obligation or liability in addition to this warranty
This catalog is intended to be free from errors. However, should errors be contained within, Keedex is not responsible for any cost associated with regards to ordering the incorrect items based on typos.
“IDEAS THAT WORK!”
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 33
This remarkable follower is a wise choice for either the newcomer or master locksmith. Made of solid brass, it will out last those made of plastic or aluminum. The capabilities of this machined follower far exceed any follower on the market today. It can be used as a regular follower, or as a master pin remover and follower on Schlage, Sargent, Kwikset, Weiser, and Almont padlocks and many others. Special taper allows smooth operation and better control over sticking pins.
K-6 • MASTER FOLLOWER
This segmented follower is a simple but effective solution to thefrustration of servicing profi le cylinders. Special magnetic design for easy operation.
K-19 • PROFILE CYLINDER FOL LOW ER
K-6-COR • MASTER FOL LOW ER FOR CORBIN RUSS WINLocksmiths have asked Keedex to provide a follower similar to our existing K-6, that is compatible with Corbin Russwin. The new K-6-COR is designed for Corbin Russwin locks. It is a two piece follower that can be used with both .500" & .550" plugs. Made of solid brass. It can be used as a regular follower, or as a master pin remover. Special taper allows smooth operation and better control over sticking pins.
TOOLS
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-430344
The Affordable & Effective Tool For Core Drilling Doors.
Use of laser sight assures accurate drilling through core,
to prevent damage to either face of door.
DRLSR • DOORLASER
Includes 1/4" Bit For Drilling Pilot Hole.
This Tool is designed to be used with 1 3/4" thick doors.
K-EZR • HERCULITE REFELECTIVE SET SCREW DRIVER SIMPLE AND EFFECTIVE WAY OF SERVICING
HERCULITE DOORS.
Made of highly polished stainless steel with interchangeable Allen and slotted screwdriver tips. The K-EZR is designed to slide under a Herculite door so you can service the cylinder without having to remove the door. Once placed under the door, you can view the set-screw with its refl ective surface, you then turn the sprocket, loosing the set-screw. With the sprocket design there is no need to disconnect from the set-screwwhich saves you time.
Interchangeable slotted and Allen head tips are provided.
K-5 • SPEEDO II 12v. DC MOTOR3800 R.P.M. high torque reversible 12 volt D.C. motor. This motor is engineered to work with a wide variety of key machines. The K-5 even out performs more expensive motors. Energy effi cient permanent magnet design. Reversing power leads allows for reverse shaft rotation. Motor is capable of a full 1/4 h.p. Bronze bearings. Comes with pulley, mounting bracket and belt. Guaranteed for one year.
TOOLS
Parts EZR-A • 2mm Allen Insert TipEZR-S • 1/4” Slotted Insert Tip
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 55
• Prevents injuries to you and your
em ploy ees hands,caused by a
screw driv er slipping.
• Prevents stripped out screw heads.
• Allows you to remove even the most
stub born screws.
SPIN • "SPIN OUT" Screwdriver For Mortise CylindersHow many times have you struggled, try ing to remove the cam screws on mor tise cyl in ders? The Spin Out is spe cial ly de signed to remove even the most stub born screws. The “Spin Out” features a screw driv er with an over sized han dle for ex tra torque. Four sizes of interchangeable screw driv er bits – two slot ted and two Phillips.
Includes stand, with bronze bear ing, to pre vent the screw driv er from slip ping. Al lows you to pro vide con stant, even pres sure to the screws.
IF YOU CAN SLIDE THIS TOOL UN DER THE DOOR, YOU WILL OPEN IT!
This tool is to be sold only to locksmiths and law en force ment
agen cies.
This tool is not to be used un law ful ly. Kee dex will not be
re spon si ble for the mis use of this tool.
K-22 LEVER OPENING TOOL
Replacement Cable Available: Par t# K-22CABLE
TOOLS
These nonconductive fi berglass rods can be screwed together to form longer lengths for running through walls, attics, crawl spaces, sub-fl oors, and suspended ceilings.
Kit includes
•(10) 39” rods with threaded brass connectors,
•A 6-1/2” fl exible acrylic connection that can be set to any angle,
•A brass hook end for pulling,
•And a brass eye end for pushing.
WRR-33WIRE RUNNING RODS
Can be extended up to 33 feet!
Also Available!
WRR-VV Hook
WRR-WWhisk Head
Insert BitsSPNBT1 • 1F-2R 1/4” HexSPNBT2 • 4F-5R STOTSPNBT3 • #0 Phillips BitSPNBT4 • # 1 Phillips Bit
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-430366
ALWAYS WEAR SAFTEY GOGGLES WHEN USING THIS PRODUCT!! !MADE IN CHINA
Keedex Flex Bits are a great new product available from Keedex. These bits are long enough for core drilling doors, drilling at (install) sites for running wiring in walls and crawl
spaces.
Available in these sizes: FB-14X24 - 1/4” x 24” Flex Bit FB-38X24 - 3/8” x 24” Flex Bit FB-14X36 - 1/4” x 36” Flex Bit FB-38X36 - 3/8” x 36” Flex Bit FB-14X48 - 1/4” x 48” Flex Bit FB-38X48 - 3/8” x 48” Flex Bit FB-38X48
• Designed to drill through steel plates as well as wood.• 118 degree point provides more gradual breakthrough and limits the grabbing that occurs when using a traditional 135 degree point.• Split point tip and slow spiral design improves bit self-cleaning and eases pull back.• 3/16” fl exible shaft allows you to easily align the bit along a stud for reference drilling.• Holes in drill bit head and chuck end for attaching wire.
CARBIDE TIP DRILL BITS
These Carbide Tip Drill bits are specially designed for drilling through safes, hard plate, and other demanding metal work. Sizes range from 1/8” to 5/16” in diameter, and from 3” to 30” in length. See complete product line-up to the right.
The longer bits, such as the 24” & 30” bits, are ideal for access control & alarm work. With their sharpened tips, designed for opening safes, they are ideal for drilling through walls and especially helpful if you should encounter any rebar!
Normal bit Our Carbide Tip Bit
Stock numbers and SizesStock
NumberDiameter and Length
K-B18X3 1/8” x 3” Carbide Tip Safe Drill Bit
K-14X4 1/4” x 4” Carbide Tip Safe Drill Bit
K-14X6 1/4” x 6” Carbide Tip Safe Drill Bit
K-14X13 1/4” x 13” Carbide Tip Safe Drill Bit
K-316X4 3/16” x 4” Carbide Tip Safe Drill Bit
K-316X6 3/16” x 6” Carbide Tip Safe Drill Bit
K-38X4 3/8” x 4” Carbide Tip Safe Drill Bit
K-38X6 3/8” x 6” Carbide Tip Safe Drill Bit
K-B38X13 3/8” x 13” Carbide Tip Safe Drill Bit
K-38X30 3/8” x 30” Carbide Tip Safe Drill Bit
K-12X4 1/2” x 4” Carbide Tip Safe Drill Bit
K-12X6 1/2” x 6” Carbide Tip Safe Drill Bit
K-B12X13 1/2” x 13” Carbide Tip Safe Drill Bit
K-12X24 1/2” x 24” Carbide Tip Safe Drill Bit
K-516X4 5/16” x 4” Carbide Tip Safe Drill Bit
K-516X6 5/16” x 6” Carbide Tip Safe Drill Bit
K-516X13 5/16” x 13” Carbide Tip Safe Drill Bit
K-516X30 5/16” x 30” Carbide Tip Safe Drill Bit
TOOLS
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 77
Contains an assortment of the zinc plated roll pins most com mon ly used by locksmiths.
Includes sizes 1/16 thru 5/32" in diameter and 3/8 thru 1 1/2" in length. 18 different sizes. 480 pins total. All packed in a durable, 18 compartment plastic box. Re-order numbers included. Made in the U.S.A.
K-RP • ROLL PIN KIT
This kit contains an assortment of metric and fractional roll pins.Metric sizes: 1.5mm x 18mm and the following sizes in 26mm length: 2mm, 2.5mm, 3mm, 4mm, 4.5mm, 5mm, 6mm & 8mm.Fractional sizes: 1" lengths of the following sizes: 1/16", 5/64", 3/32", 1/8",5/32", 3/16", 7/32", 1/4" & 5/16". Quantity: 12 each of the above sizes. 216 pins total. Re-order numbers included. Made in the U.S.A.
K-RP-M • METRIC PLUS ROLL PIN KIT
K-RP-1 Roll Pin 1/16 x 3/8" 54K-RP-2 Roll Pin 1/16 x 1/2" 51K-RP-3 Roll Pin 1/16 x 3/4" 46K-RP-4 Roll Pin 1/16 x 1" 41K-RP-5 Roll Pin 3/32 x 1/2" 45K-RP-6 Roll Pin 3/32 x 5/8" 43K-RP-7 Roll Pin 3/32 x 3/4" 41K-RP-8 Roll Pin 3/32 x 1" 31K-RP-9 Roll Pin 1/8 x 1/2" 35K-RP-10 Roll Pin 1/8 x 3/4" 28K-RP-11 Roll Pin 1/8 x 1" 33K-RP-12 Roll Pin 1/8 x 1 1/4" 26K-RP-13 Roll Pin 1/8 x 1 1/2" 22K-RP-14 Roll Pin 1/8 x 2" 17K-RP-15 Roll Pin 5/32 x 3/4" 32K-RP-16 Roll Pin 5/32 x 1" 25
K-RP-17 Roll Pin 5/32 x 1 1/4" 21K-RP-18 Roll Pin 5/32 x 1 1/2" 18K-RP-19 Roll Pin 5/64 x 1" 51K-RP-20 Roll Pin 3/16 x 1" 22K-RP-21 Roll Pin 7/32 x 1" 17K-RP-22 Roll Pin 1/4 x 1" 14K-RP-23 Roll Pin 5/16 x 1" 11K-RP-24 Roll Pin 1.5 x 18 mm 13K-RP-25 Roll Pin 2 x 26 mm 11K-RP-26 Roll Pin 2.5 x 26 mm 11K-RP-27 Roll Pin 3 x 26 mm 21K-RP-28 Roll Pin 4 x 26 mm 18K-RP-29 Roll Pin 4.5 x 26 mm 13K-RP-30 Roll Pin 5 x 26 mm 13K-RP-31 Roll Pin 6 x 26 mm 10K-RP-32 Roll Pin 8 x 26 mm 10
Part# Description Pieces Per Package Part# Description Pieces Per PackageK-RP Roll Pin Kit K-RP-M Metric Plus Roll Pin Kit
PARTS LIST FOR ROLL PIN KITS
TOOLS
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-430388
TAMPER • TAMPER RESISTANT SCREWDRIVERKeedex has a new Tamper Resistant Screwdriver. This screwdriver comes with eleven interchangeable tips. Includes the following:
Two Spanner Tips (#6 & #8).
Six tamper resistant torx tips (T10, T15, T20, T25, T27 & T30). Three tamper resistant hex tips (5/32", 3/16" & 7/32").
Commercial & InstitutionalLocksmithing
Invaluable For:
Keedex is your source for Tamper Re sis tant Screws!
Automotive Work Access Control
This kit contains 12 each of the following 14 different sizes of machine and wood/metal tamper resistant stainless steel screws, specifi cally designed to suit the needs of locksmiths. REORDER NUMBERS CONVENIENTLY LOCATED ON LID TO MAKE REORDERS EASY!
Spanner fl at head machine screw 6-32 x 3/8”Spanner fl at head machine screw 6-32 x 1/2”Spanner fl at head undercut machine screw 8-32 x 1/4”Spanner fl at head machine screw 8-32 x 3/8” Spanner fl at head machine screw 8-32 x 1/2”Spanner fl at head undercut machine screw 12-24 x 1/2”Spanner oval head machine screw 10-32 x 2 1/2”Spanner pan head machine screw 6-32 x 1/2”Spanner pan head machine screw 8-32 x 1/2”Spanner pan head machine screw 10-32 x 1”Spanner pan head sheet metal screw #6 x 3/4”Spanner pan head sheet metal screw #10 x 1 1/4”Spanner fl at head sheet metal screw #8 x 3/4”Spanner fl at head sheet metal screw #8 x 2”
TAMPER RESISTANT SPANNER SCREW KIT
SSKIT
168 screws total. Comes with tips!
All tips fi t into the screwdriver's storage handle.
TOOLS
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 99
PART# DESCRIPTION PK DEALER LISTSHMF632X12 Hex Tamper Flat Head Machine Screw 6-32 x 1/2" 25 14.67 24.45SHMF832X12 Hex Tamper Flat Head Machine Screw 8-32 x 1/2" 25 14.67 24.45SHMF832X200 Hex Tamper Flat Head Machine Screw 8-32 x 2" 25 14.67 24.45SHMF1024X12 Hex Tamper Flat Head Machine Screw 10-24 x 1/2" 25 14.67 24.45SHMF1024X100 Hex Tamper Flat Head Machine Screw 10-24 x 1" 25 14.67 24.45SHMF1032X12 Hex Tamper Flat Head Machine Screw 10-32 x 1/2" 25 14.67 24.45SHMF1420X58 Hex Tamper Flat Head Machine Screw 1/4-20 x 5/8" 25 14.67 24.45SHMB832X12 Hex Tamper Button Head Machine Screw 8-32 x 1/2" 25 14.67 24.45SHMB832X34 Hex Tamper Button Head Machine Screw 8-32 x 3/4" 25 14.67 24.45SHMB1024X12 Hex Tamper Button Head Machine Screw 10-24 x 1/2" 25 14.67 24.45SHMB1032X12 Hex Tamper Button Head Machine Screw 10-32 x 1/2" 25 14.67 24.45SHMB1032X34 Hex Tamper Button Head Machine Screw 10-32 x 3/4" 25 14.67 24.45SHMB1420X58 Hex Tamper Button Head Machine Screw 1/4-20 x 5/8" 25 19.90 33.18SMHMB4X12MM Metric Hex Tamper Button Head Machine Screw 4 x 12mm 25 14.67 24.45SSMFU440X14 Spanner Flat Head Undercut Machine Screw 4-40 x 1/4" 25 7.92 13.20SSMF632X38 Spanner Flat Head Machine Screw 6-32 x 3/8" 25 7.92 13.20SSMF632X12 Spanner Flat Head Machine Screw 6-32 x 1/2" 25 7.92 13.20SSMF632X34 Spanner Flat Head Machine Screw 6-32 x 3/4" 25 7.92 13.20SSMF632X100 Spanner Flat Head Machine Screw 6-32 x 1" 25 7.92 13.20SSMF632X112 Spanner Flat Head Machine Screw 6-32 x 1 1/2" 25 8.22 13.70SSMFU832X14 Spanner Flat Head Undercut Machine Screw 8-32 x 1/4" 25 8.22 13.70SSMF832X38 Spanner Flat Head Machine Screw 8-32 x 3/8" 25 8.22 13.70SSMF832X12 Spanner Flat Head Machine Screw 8-32 x 1/2" 25 8.22 13.70SSMF832X34 Spanner Flat Head Machine Screw 8-32 x 3/4" 25 8.22 13.70SSMF1032X114 Spanner Flat Head Machine Screw 10-32 x 1 1/4" 25 11.00 18.34SSMFU1224X12 Spanner Flat Head Undercut Machine Screw 12-24 x 1/2" 25 13.50 22.51SSMO1032X212 Spanner Oval Head Machine Screw 10-32 x 2 1/2" 25 14.00 13.34SSMP632X12 Spanner Pan Head Machine Screw 6-32 x 1/2" 25 7.92 13.20SSMP632X114 Spanner Pan Head Machine Screw 6-32 x 1 1/4" 25 8.34 13.89SSMP832X12 Spanner Pan Head Machine Screw 8-32 x 1/2" 25 8.34 13.89SSMP832X114 Spanner Pan Head Machine Screw 8-32 x 1 1/4" 25 9.87 16.45SSMP1024X12 Spanner Pan Head Machine Screw 10-24 x 1/2" 25 9.87 16.45SSMP1032X100 Spanner Pan Head Machine Screw 10-32 x 1" 25 9.87 16.45SSSP6X34 Spanner Pan Head Sheet Metal Screw #6 x 3/4" 25 7.92 13.20SSSP10X114 Spanner Pan Head Sheet Metal Screw #10 x 1 1/4" 25 11.04 18.40SSSF8X34 Spanner Flat Head Sheet Metal Screw #8 x 3/4" 25 9.00 15.01SSSF8X200 Spanner Flat Head Sheet Metal Screw #8 x 2" 25 10.95 18.26STMB632X34 Torx Tamper Button Head Machine Screw 6-32 x 3/4" 25 11.85 19.76STMB832X38 Torx Tamper Button Head Machine Screw 8-32 x 3/8" 25 11.64 19.40STMB832X34 Torx Tamper Button Head Machine Screw 8-32 x 3/4" 25 12.22 20.37STMB1420X12 Torx Tamper Button Head Machine Screw 1/4-20 x 1/2" 25 17.99 29.98STMB1420X34 Torx Tamper Button Head Machine Screw 1/4-20 x 3/4" 25 18.25 30.43STMB1428X12 Torx Tamper Button Head Machine Screw 1/4-28 x 1/2" 25 20.54 34.24STMB51618X34 Torx Tamper Button Head Machine Screw 5/16-18 x 3/4" 25 28.74 47.91STMF1024X34 Torx Tamper Flat Head Machine Screw 10-24 x 3/4" 25 12.94 21.56STMFU1224X12 Torx Tamper Flat Head Undercut Machine Screw 12-24 x 1/2" 25 14.99 24.98STMFU1420X12 Torx Tamper Flat Head Undercut Machine Screw 14-20 x 1/2" 25 17.99 29.98STMF1420X34 Torx Tamper Flat Head Machine Screw 1/4-20 x 3/4" 25 18.25 30.43STMF1420X100 Torx Tamper Flat Head Machine Screw 1/4-20 x 1" 25 20.54 34.34STMF1420X114 Torx Tamper Flat Head Machine Screw 1/4-20 x 1 1/4" 25 21.20 35.35STSB8X12 Torx Tamper Button Head Sheet Metal Screw #8 x 1/2" 25 11.64 19.40STSB8X34 Torx Tamper Button Head Sheet Metal Screw #8 x 3/4" 25 12.25 20.43STSB10X12 Torx Tamper Button Head Sheet Metal Screw #10 x 1/2" 25 15.45 25.76STSB10X34 Torx Tamper Button Head Sheet Metal Screw #10 x 3/4" 25 12.50 20.84STSF10X114 Torx Tamper Flat Head Sheet Metal Screw #10 x 1 1/4" 25 16.87 28.12
Many of the locksmiths and installers, who have purchased the Keedex Tamper Resistant Screwdriver, have asked us if we carry the Tamper Resistant Screws. Here is a list of the screws that we are stocking. All of the screws are made of stainless steel. Each package contains twenty-fi ve screws. We will be adding to this list, according to your customers needs.
KEEDEX STAINLESS STEEL TAMPER RESISTANT SCREWS
SECURITY SCREWS
*prices subject to change without warning
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43031010
SAFE PRODUCTS
• Allows dialing of a safe away from the drill point • Easy transfer of gate to any position fast and accurately • Precise one to one ratio between dial and spindle • Easy to read large format dial • Attaches strongly with the use of very strong magnets and set screw.
The Keedex K-ETD Emergency Transfer Dial is an effi cient tool designed to attach to a safe in a manner in which not to obscure the view of the internal lock after penetration of a safe for opening, thus allowing viewing and dialing at the same time. The transfer dial has two movable indexes to facilitate the transfer of combination numbers.
LIT-M • Moonlight
The Keedex Moonlight attaches to any Mini-Maglite® fl ashlight and is designed to fi t into a 1/4” opening for viewing inside of a drilled hole. By inserting the Moonlight into the hole it lights up the inside (of a safe) using 11 fi ber-optic elements. The crescent shape “moon” design covers only 20% of the viewing area allowing an 80% non-obstructed view inside the hole with a high-intensity light beam.
Mini-Maglite® Not IncludedM NLIGHTTNLIGHT M
The stronger your light source the brighter the Moonlight. Maglite® makes 1 and 3 watt bulbs. We highly suggest the 3-watt LED fl ashlight Maglite® features a fast-focus beam that adjusts from spot-to-fl ood, use the spot light focus.The Moonlight needs no batteries and has no light bulbs to break. It is made of a highly researched fl exible tubing which uses over 22 feet of fi ber-optic cable.
Keedex is in the process of developing a whole new line of fi ber-optic products for locksmiths. Visit http://www.keedex.com to see our advances. WARNING: NOT FOR MEDICAL USE
The base of the U-HOLD is a large 2” diameter magnet that secures strongly to safes or other metal surfaces. Extending from the base is an arm with 2 ball bearing pivot points, that allows the user to position the clip into thousands of positions to hold a scope or tool and aim the light where it is needed, keeping both of the users hands free for drilling and working on the surface. The arm can be tightened easily with the twist of the easy turning knob to keep the light or tool in the position it is desired, keeping the light in correct spot.
U-HOLD • Universal Scope Holder
Where the U-HOLD differs from other scope holders is the clip that holds the tubing itself. Rather than clamping down on the scope or tool, the U-HOLD clips to it, preventing any damage to expensive scopes or other tools that can occur from other similar devices.
PartsK-ETD-BELT • Timing BeltETD-MTI-PK • Magnetic Transfer Index pack
K-ETD • EMERGENCY TRANSFER DIAL
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 1111
Safe slick is a specially formulated gel lubricant for the professional locksmith. Use on locking bolts, pivot points, sliding parts, panic hardware and safes. Will not dry out like white grease or be-come gritty like black grease. Safe Slick is non-penetrating and odorless. Handy 2 oz. size. Made in U.S.A.
Makes safes work SLICK.
K-16 • SAFE REPAIR KIT
K-23 • SCOPE
Developed specifi cally for locksmiths and safe men, these steel taper pins and corresponding ball bearings will prove invaluable when repairing safes that have been drilled open.
Five sizes of taper pins milled from bar steel to help you repair drill holes from 1/8" to 1/2". Four sizes of corresponding ball bearings to complete a professional repair. Reorder numbers included. Made in the U.S.A.
The K-23 Scope for mini fl ashlights transforms your mini-fl ashlight into a pow er ful inspection device. Works with Mini-Mag Lite®, Brinkman® and many oth er "AA" battery fl ashlights.
The K-23 consists of a 1" diameter polypro py lene cap and two interchange able, fi ber optic rods, one 45° and one 90°.
Part# Description Number of Pieces in Re-Order Pack
The following is a list of available ball bearings & taper pins, including some sizes that do not come with the kit. Keedex can furnish you with any size of taper pin.
K-16-B30 Ball Bearing 1/4" 10K-16-B50 Ball Bearing 3/8" 10K-16-B70 Ball Bearing 7/16" 10K-16-B90 Ball Bearing 1/2" 5K-16-TP01 Taper Pin 1/8" 10K-16-TP02 Taper Pin 3/16" 10K-16-TP03 Taper Pin 1/4" 10K-16-TP04 Taper Pin 5/16" 10K-16-TP05 Taper Pin 3/8" 10 K-16-TP07 Taper Pin 7/16" 10K-16-TP09 Taper Pin 1/2" 2
SAFE PRODUCTS
K-1 • SAFE SLICK
Mini-Maglite® not included
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43031212
How many times have you searched and searched for a particular change key at the bottom of your tool box? Keedex has the solution. The K-18 Change Key Set is a set of the twelve most common change keys, all in a handy case. Keys fold out “knife style” to select the proper tool. Case is engraved with description of uses. Keys are made of stainless steel. Made in U.S.A.
K-18 • Change Key Set
K-18-16 Phillips HeadK-18-2 Mosler 302K-18-10 LaGard - Metal WheelK-18-9 LaGard - Plastic Wheel K-18-15 S&G 4 Wheel (8400)K-18-4 S&G 3 Wheel (Std)K-18-13 8077 ResetK-18-14 8077 ResetK-18-7 8077 Change KeyK-18-17 Flat ScrewdriverK-18-19 Center Spline Allen WrenchK-18-18 Mosler Attaching Allen Wrench
The new Keedex K-GSA, GSA type change key set, is de signed for those in di vid u als work ing in the GSA en vi ron ment. Con tains the keys need ed for ser vic ing GSA rat ed con tain ers. Keys are made of cast stainless steel. Case is engraved with de scrip tion of uses. Made in USA.
K-GSA • GSA Type Change Key Set
KEY# DESCRIPTIONK-18-1 Mosler-35-4 WheelK-18-2 Mosler-302-3 WheelK-18-3 S&G Amsec 3 WheelK-18-4 S&G-6720-3 WheelK-18-5 Diebold-180-3 WheelK-18-6 Diebold-177-4 WheelK-18-7 S&G Padlock-3-WheelK-18-8 S&G-4163K-18-9 La Gard-1R-3 WheelK-18-10 La Gard 3 WheelK-18-11 La Gard 4 WheelK-18-12 La Gard-Amsec-3 Wheel
CONTAINS THE FOLLOWING KEYS
CONTAINS THE FOLLOWING KEYS
SAFE PRODUCTS
*Keys can be ordered separately
*Keys can be ordered separately
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 1313
K-14 • Safe Buster
This tool is used to drill through hardplate. You can apply over 500 lbs of pressure at the drill tip with about 35 lbs. of pressure at the handle. Penetrates most hardplate in minutes instead of hours. Drill Motor Not Included.
* Quick release pins.
* Drills at almost any angle.
* 12" chain included.
* Allows drill motor to be used for other
purposes.
* Portable & built to last a lifetime.
* Designed to prevent dangerous ro ta tion of
drill motor.
Versatile safe drilling rig that uses over 12 types of drill motors. Bosch, AEG, etc. The most affordable in its class. You won’t be afraid of any safe with this innovative Keedex product.
*Can be used with many makes & models of drill motors.
* Precision made from quality ma te ri al.* Large, comfortable handle grip.* Minimum time for setup & take down.* 35 lbs of pressure on handle exerts 500 lbs on drill tip.
An adapter ring is used to mount your drill motor to the K-14 (please refer to the above drawing). This adapter ring mounts to the front end of your drill housing, just behind the chuck. The adapter ring that is provided with the K-14, is designed to work with a housing that has a diameter of approximately 1.69" to 1.72".
K-14-MIL • Safe Buster with Milwaukee Collar
We also have an adapter ring available for Mil-waukee drill motors, that have a housing with a diameter of approximately 1.8". Please specify if you would like us to ship your K-14 with the Milwaukee adapter, instead of the standard adapter.
Adapter ring
PARTIAL LIST OF DRILL MOTORS COMPATIBLE WITH THE K-14 SAFE BUSTER
MFG MODEL RPMBOSCH 1194AVSRK 0-2600HITACHI DV20VB2-1/2 0-3000HITACHI DV16V-5/8 0-2900HITACHI FDVB2-5/8 0-3000JEPSON 2219 0-2800
K-14 • Safe Buster
SAFE PRODUCTS
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43031414
K-9, K-21 • STYLE GUARD - CENTER HUNG
K-17 • SECURITY GUIDE & BOLT
Aluminum Door Security
K-9A 4" Aluminum Finish Dimensions: 8"x 4" x 1 1/2"K-9B 4" Duranodic Finish Dimensions: 8"x 4" x 1 1/2"K-9BLK 4" Black Finish Dimensions: 8"x 4" x 1 1/2"K-21A 4 1/2" Alum. Finish Dimensions: 8"x 4.5" x 1 1/4"K-21B 4 1/2" Dura Finish Dimensions: 8"x 4.5" x 1 1/4"
K-15 • DOUBLE DOOR STYLE GUARD
K-15A Double Door Aluminum Finish Dim: 7 3/4" x 1 3/4" x 1 3/4"K-15B Double Door Duranodic Finish Dim: 7 3/4" x 1 3/4" x 1 3/4"
Finally a better way to secure a set of double aluminum doors. 12 gauge steel increases security and can repair doors that have already been attacked. Designed with a “knock out” to accommodate either the W&F or the Adams Rite Bolt. Baked on powder coat fi nish.
Made of 12 gauge steel, Style Guard reinforces or repairs aluminum-stile doors. K-9 is designed for standard, center hung doors, with 4" jambs. K-21 is for 4 1/2" jambs. Designed with a “knock out” to accommodate either the W&F or the Adams Rite Bolt. Baked on powder coat fi nish.
K-20 • OFFSET STYLE GUARD
K-20A Offset Style Aluminum Finish Dim: 8" x 1 3/4" x 1 3/8"K-20B Offset Style Duranodic Finish Dim: 8" x 1 3/4" x 1 3/8"
Use the K-20 to reinforce or repair jambs with offset hung aluminum doors. This non-handed guard is easy to install and includes pop rivets and carriage bolts. Baked on powder coat fi nish.
The K-17 Security Guide & Bolt replaces the fl imsy plastic guides and fl ush bolts provided by many manufacturers with quality steel. With a relatively simple installation, you eliminate the possibility of a burglar breaking in by merely snapping the plastic bolts.
Made of steel, cadmium plated to prevent rust, the K-17 works with the Builders Brass Works & Slide-Co fl ush bolts.
Use the short side to replace the BBW Guide. Use the long side to replace the Slide-Co & W&F Guides
Replaces plastic pin with steel bolt. Self-Tapping screws included.
"
4"
ity
s &&&&&&&&&&&&&&&&&& &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& &&&&&&&&&&&&&&&
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 1515
K-24-3 K-24-4
K-24-10 K-24-19
K-24-26K-24-26D
K-24B
K-24L-3 K-24L-4
K-24L-10
K-24L-26K-24L-26D
K-24LAK-24A K-24LB
Bright Brass Satin Brass
Satin Bronze Satin Bronze BlackPowder coat
Bright ChromeSatin Chrome Satin Chrome
DuranodicPowder coat
Six Pack
DuranodicPowder coat
Bright Brass Satin Brass
Bright Chrome
AluminumPowder coat
AluminumPowder coat
Six Pack
Cylinder Guards
When installed, these free spinning Cylinder Guard rings prevent would-be burglars or intruders from forcibly unscrewing the lock cylinder with channel locks, vise grips, or other burglary tools.
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43031616
PROTECTORS FOR LOCKS & OTHER HARDWARE
8.5"
3.5"Deep
3"
K-12, K-12D • PROTECT-A-LOKFinally a product designed to protect locks and other hardware from impact damage. The Keedex K-12 Protect-A-Lok, made from Lexan polycarbonate, is virtually indestructible. Designed for use in areas where locks may have a chance of getting hit by carts, forklifts or vehicles. Can be used with levers, knobs, panic hardware and more. Installs in minutes. Guaranteed for 5 years. Available in Cream (K-12) and Duranodic (K-12D).
Use for Protecting:•Locks •Levers •Panic Hardware •Safe Dials and Handles •Fire Alarm Equipment •Access Control Equip ment
Used in: •Hospitals •Hotels•Restaurants •Schools•Super Markets •Warehouses•And More
8.5"
3.5"Deep
3.5"
4"
2"
Keedex offers a stainless steel version of our popular K-12 Protect-A-Lok, for your customers who prefer stainless steel. There are ten different sizes of the Stainless Steel Protect-A-Lok. All are made from 18 gauge stainless steel.
K-12S
A
B
D
C
EPart# A B C D E
K-12S 8.50" 3.50" 2.00" 4.00" 3.50"K-12S-212 8.50" 3.50" 2.00" 5.10" 2.60"K-12S-L 10.00" 3.50" 2.00" 5.50" 4.25"K-12S-L512 11.95" 3.50" 2.00" 5.00" 5.50"K-12S-XL24 24.00" 3.50" 2.00" 12.50" 4.25"K-12S-XL34 34.00" 3.50" 2.00" 22.50" 4.25"K-12S-XL41 41.00" 3.50" 2.00" 29.25" 4.25"K-12S-COR 2.875” 4” 2.5” 2” 2.875”K-12S-SGT 8.00" 3.75" 2.30" 6.15" 2.08"K-12S-VON 8.00" 3.75" 2.30" 6.15" 2.82"K-12S-YALE 8.00" 3.95" 2.30" 6.15" 2.82"
Stainless SteelStainless Steel
Large Stainless SteelLarge Stainless Steel
Extra Large 24" Stainless SteelExtra Large 34" Stainless SteelExtra Large 41" Stainless Steel
Replacement End Cap For Corbin Russwin Exit DevicesReplacement End Cap For Sargent Exit De vice
Replacement End Cap For Von Duprin Exit De viceReplacement End Cap For Yale Exit Device
Stainless Steel Versions Available!
3.75"
SAVES EXPENSIVE LOCKS, LEVERS AND OTHER HARDWARE, AGAIN AND AGAIN!
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 1717
This tool allows you to make pre cise installation of Adams Rite 1850S, 4530, 4710 & 4711 se ries locks. Also works with the In ter na tion al DH 1822 & DL4511. Covers the fol low ing back sets: 7/8", 31/32" & 1 1/8".
Includes guide for Adams Rite exit in di ca tor #4089.
Has cutout for BBW #3925 & In ter na tion al FB-1200 fl ush bolts.
This template is designed to be used with a 1/2" router guide with a 1/4" bit.
INSTALLATION TEMPLATES
K-TMPA/RINSTALLATION TEMPLATE
FOR ADAMS RITE
WARNING: Wear Eye Protection
Top Latch
Cut Out
LatchScrews
L-Rod
Rim
Scr
ews
Rim
Loc
kC
ente
rR
im C
am
Cen
ter
PullmanLatch
GravityMount ing
Han dle Stud Screws
Move pins to adjust backset:
7/8"
Cylinder
31/32"1 1/8"
Latch
Adams Rite Model #4089 Exit In di ca tor
BBW #3925 & In ter na tion al FB-1200 fl ush bolts.
7/8"31/32"
1 1/8"
K-TMPDOR • INSTALLATION TEMPLATE FOR DOR-O-MATIC®990/1990 & 1090/2090 SERIES EXIT DEVICES.
Manufacturer 1/2" Template Guide# Nut
Black & Decker 62946-00 62942-00
Bosch 82988
Bosch RA1109 (Model# 1613, 1613EVS, 1614 & 1614EVS)
Craftsman Use 5/8” guide (25082 is part# for 3 piece set which includes a 5/8” guide) with a 3/8” bit. • Craftsman does not make a 1/2” guide.
Hitachi 303351
Makita 323449-0 (Fits Model#3601B
Makita 164776-4 (Model# 3606, 3612B, 3612BR & 3620)
Milwaukee Use 5/8” guide (49-54-0530) with a 3/8” bit. Milwaukee does not make a 1/2” guide.
Porter Cable 42033 42237
Ryobi 6072083
Skil 91805
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43031818
ARMORED DOOR LOOPSUse these door loops when you need to transfer low-voltage electrical current from the door frame to the door.
STAINLESS STEEL ARMORED DOOR LOOPS
ALLSTAINLESS STEEL
DESIGN.FLEXIBLE STAINLESS STEEL CONDUIT
AND STAINLESS STEEL END PIECES AND MOUNTING SCREWS
Available with 1/4" or 3/8" ID
Costs no more than most Door Loops that have fragile plastic end pieces!
K-DS38 K-DS
C h
OPS
Door Loops
DuranodicK-DLB 1/4” x 18” Flexible ConduitK-DLB12 1/4” x 12” Flexible Conduit K-DLB24 1/4” x 24” Flexible ConduitK-DLB30 1/4” x 30” Flexible ConduitK-DL38B 3/8” x 18” Flexible ConduitK-DL38B24 3/8” x 24” Flexible ConduitK-DL38B30 3/8” x 30” Flexible ConduitK-DL38B36 3/8” x 36” Flexible ConduitK-DL38B49 3/8” x 49” Flexible Conduit
BlackK-DLBLK 1/4” x 18” Flexible ConduitK-DL38BLK 3/8” x 18” Flexible Conduit
GoldK-DLG 1/4” x 18” Flexible ConduitK-DLG24 1/4” x 24” Flexible ConduitK-DL38G 3/8” x 18” Flexible Conduit
WhiteK-DLW 1/4” x 18” Flexible Conduit K-DL38W 3/8” x 18” Flexible Conduit
Stainless Steel Armored Door Loops
K-DS 1/4” x 18” Flexible ConduitK-DS-12 1/4” x 12” Flexible ConduitK-DS-24 1/4” x 24” Flexible ConduitK-DS-30 1/4” x 30” Flexible ConduitK-DS-36 1/4” x 36” Flexible ConduitK-DS-60 1/4” x 60” Flexible ConduitK-DS-72 1/4” x 72” Flexible ConduitK-DS38 3/8” x 18” Flexible ConduitK-DS38-24 3/8” x 24” Flexible ConduitK-DS38-36 3/8” x 36” Flexible ConduitK-DS38-48 3/8” x 48” Flexible ConduitK-DS38-60 3/8” x 60” Flexible Conduit
•Entire assembly has an at-tractive and durable powder
coat fi nish.
ARMORED DO
Powder Coated Stainless Steel Armored Door Loops
K-DSB 1/4” x 18” Duranodic FlexK-DSB-12 1/4” x 12” Duranodic FlexK-DS38B 3/8” x 18” Duranodic FlexK-DSBLK 1/4” x 18” Black FlexK-DSBLK-12 1/4” x 12” Black FlexPolished Chrome
K-DL-US26 1/4” x 18” Flexible ConduitTHE NATURE OF POWDER COATED FLEX
IT IS INEVITABLE THAT PORTIONS WILL REMAIN UNFINISHED,SUCH AS LOCATIONS WHERE IT WAS HUNG FOR COATING
AND THE AREAS WITHIN THE FLEX (BENDS)-THIS IS NOT A DEFECT-
Alu mi numK-DLA 1/4” x 18” Flexible ConduitK-DLA12 1/4” x 12” Flexible ConduitK-DLA24 1/4” x 24” Flexible ConduitK-DLA30 1/4” x 30” Flexible ConduitK-DLA45 1/4” x 45” Flexible ConduitK-DLA49 1/4” x 49” Flexible ConduitK-DLA60 1/4” x 60” Flexible ConduitK-DLA72 1/4” x 72” Flexible ConduitK-DL38A 3/8” x 18” Flexible ConduitK-DL38A24 3/8” x 24” Flexible ConduitK-DL38A30 3/8” x 30” Flexible ConduitK-DL38A36 3/8” x 36” Flexible ConduitK-DL38A49 3/8” x 49” Flexible ConduitK-DL38A60 3/8” x 60” Flexible Conduit
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 1919
POWDER COAT DURANODIC
K-DS-EC-BK-DS38-EC-B
POWDER COAT BLACK
K-DS-EC-BLKK-DS38-EC-BLK
K-DS-EC K-DS38-EC
Need A Size We Don’t Make?Build Your Own!
Component Parts Available
Door Loops
BUILD-A-DOOR LOOP
Flex Conduit BulkA) K-FLX.............1/4” Steel 50’-250’* (USA)B) K-FLX38.........3/8” Steel 50’-250’* (USA)C) K-DS-FLX.......1/4” x 18’Stainless Steel (CHINA)D) K-USS-FLX.....1/4” Stainless Steel (USA) 50’-250’*
E) K-DS-FLX38...3/8”x 18’ Stainless Steel (CHINA) F) K-USS-FLX38..3/8” Stainless Steel (USA) 50’-250’*
Connector Kits - Base, 1 connector w/ C clip, set
screw and installation screws
Door Loop Covers
K-DLACOVER-Powder coated AluminumK-DLBCOVER-Powder coated DuranodicK-DL3COVER- Bright BrassK-DL26COVER- Bright ChromeK-DLGCOVER- GoldK-DLBLKCOVER- BlackK-DLWCOVER-White
G) K-FLX-A ........1/4” Aluminum sold per footH) K-FLX38-A..... 3/8” Aluminum sold per footI) K-FLX-B ...........1/4” Duranodic sold per foot**J) K-FLX-BLK.......1/4” Black sold per foot**K) K-FLX-G.............1/4” Gold sold per foot**
A
CB1 B2
Whether you have specifi c needs for a custom Door Loop set-up, or need parts to have on hand at all times to create exactly what you need for each job, Keedex has you covered.
If you are putting together a single door loop set up, pick your fl ex conduit type from group A, the corresponding sized connector base from group B1 or B2, and the cover color you desire from group C.
(if you select the Stainless Steel End Caps in B2 you do NOT need to pick a product from group C)
A,G,I,J,K,
D.
B,H
E.
C. F.
** not pictured
Set of 2 Stainless Steel End Capswith stainless screws
Finish:bare aluminum
K-DLCKK-DLCK38
Choose only if you select from group B1
*50’ Increments up to 250’ All powder-coated fl ex noted above is made from U.S. Steel (K-FLX & K-FLX38)
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43032020
“The ultimate Corvette tool.” Use where you have a “straight shot” at the clip. SPECIAL FEATURE - ball bearing holds clip in tool until YOU want it removed.
K-3 • STRAIGHT SHOT
K-7 • G.M./FORD LOCK BLOCKK-7-10C • G.M. 10 CUT LOCK BLOCKThe K-7 G.M./Ford Lock Block is truly a versatile tool. One end accommodates all G.M. side bar locks, as well as older AMC and Chrysler side bar ignitions. The other end, accepts Ford side bar ignitions. Ball bearing action holds lock fi rmly. A practical tool for service truck or shop use.
The K-7-10C is designed to be used with the 10 cut G.M. Lock.
K-8 • IMPRESSIONING PLATE
Decodes all tumblers in one step without complete disassembly of the lock. Pick sidebar down. Press the K-4 fi rmly into the six chambers of the lock. Read cuts with gauge provided. Made of Lexan. Guaranteed for life. Stainless steel fi ngers. Durable aluminum card. Instructions and case included.
K-4 • G.M. DECODER
K-7
K-8
K-8B
This pocket size tool compresses the lock plate spring on AMC, Chrysler tilt, G.M. tilt, telescopic, metric and standard steering columns. The tool is designed to use the same Phillips screwdriver needed to tear down the column.
K-10 • G.M. COM PRES SOR
Specialized plate that holds locks as if they were still in the vehicle. The K-8 Impressioning Plate works with your vise to hold Chrysler, Ford, Amer i can Motors, Toyota, Nissan and all stan dard cam locks.
Made of stain less steel, The New K-8B works with Honda, Mazda, Nissan 1982+, Toyota 83+ & DD cam locks and will hold all of the above locks fi rmly, without crushing the outside casing. A must for every shop.
K 7
K-8B • IMPRESSIONING PLATE IIK 8B
Automotive Tools
K-7-10C
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 2121
. . . . . . . . . . . . . . . .1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
KEEDEX
MICRO V. A. T. S.
KEEDEX
MICRO V. A. T. S.
PP10981098
AV
AV
B62
B62
The K-VATS operates as follows :
The smallest interrogator.
The simplest interrogator.
The most affordably priced in ter ro ga tor.
The new Micro V.A.T.S. lets you interrogate the sys tem without dis con nect ing any wires.
K-VATSMicro V.A.T.S. Interrogator
First cut a functional mechanical key for the ig ni tion. Then insert the key into the ig ni tion. Next slide the Micro V.A.T.S. unit over the head of the key.
Use the selector switch on the Micro V.A.T.S., to determine which of the fi fteen values, is the cor rect one that will start the engine. It is necessary to wait the required amount of reset time (approximately 3 1/2 - 4 minutes) be tween at tempts. The num bers on the Micro V.A.T.S. cor re spond to the fi fteen val ues of the VATS key blanks.
Included are charts that allow you to use your OHM meter as a key inden ti fi er.
K-VATS-DBLDouble-Sided Adapter For the Micro V.A.T.S. Interrogator
Allows you to use your K-VATS with double-sided ig ni tions.
Also Available
Automotive Tools
K-VATS-DBL Adapter K-VATS* not included with K-VATS-DBL
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43032222
RETAIL PRODUCTS
K-FSM-300CSECURITY SLIDING WINDOW LOCK
Triangular key and screws
3 Security window locks 1 Unique Security tool key
Secures sliding windows and doorsAttaches to track edgeMay be used on both vertical or horizontal tracks
*Enlarged views to show detail
Key Assist
Keys fold into handle when not in use
Helps to grip keys comfortably,making locks easier to open
* Elderly* Arthritis or Carpal Tunnel Sufferers* Disabled Persons
Ideal for
Comfort Twist
K-SSL-1P • COVERED GARAGE BOLT
Front plate protects padlock, making it dif f icult to cut with bolt-cut ters
Extra lock padlock hole allows for adding second padlock for extra security or lockouts
Covered Heavy Duty Garage Bolt is non-handed for garage doors, gates, or warehouses.
K-SSL-1P Comes packaged for retail and includes: *heavy duty garage bolt*2 carriage bolts*2 washers*2 nuts*ferrule*retainer for fl ush mounting
HeavyHeavy
DutyDuty
Included accessories
KEE EZ
larged views to show
Need extra keys??Order part number
K-FSM-302
Comes in retail packaging
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 2323
Standard Garage/Gate Bolt.
Available in black.
K-BXMOUNT
Tamper evident Bottle Lock is the perfect solution to securing your fi ne wines, liquors, and beverages, from any and all you don’t want drinking them!Just set your combination,Twist the top to secure, and know your liquids are safe from children, house guests, friends, or family!
RETAIL PRODUCTS
The K-BXMOUNT is a display mount for any Keedex box. The standard box mounted is the K-BXSIM and the standard fi nish is a black powder-coat, but can be ordered with ANY Keedex box and any other powder-coat color, including the popular Silver Vein.
K-FB4FOUR DRAWER FILING CABINET BAR LOCK
Lock your fi ling cabinets and im-portant document storage system with our all new Filing Cabinet Bar Lock!Unique design protects mount-ing screws from being tampered with. Accepts up to large padlock for locking (not included) Will not block drawers or cabinets adjacent to this one.
With water prices soaring, lock-ing access to your outside water supply is now an important part of security.Here’s how it works: The cover, padlock eye and padlock spin freely around the fi tting. The fi tting cannot be unscrewed and will not leak when the Hose Bibb is locked.
Hose Bibb Lock Uses:• Stop water theft, waste, and misuses.• Stop Leaky hose bibb.• Outside or inside hose connections.• Water heater drain valve.• Gray water irrigation safety.• Homeowner, boat, R.V.• Rental, apartment, condo.• Golf Course, park, marina.•Municipal buildings, housing.
• Comes in retail packaging with gift bag and combination instructions
Secure your fi ne wines and liquors!
Tamper evident design eliminates guessing!
Prevent children from consuming alcohol or too much soda!
Customizeable combination!
Standa
Avail
K-Q4-2P Standard Garage Bolt
Included accessor ies
TM
K-HBL
BOT LOC
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43032424
STR CUTSTRAIGHT CUT INSTALLATION
TOOLThe new Keedex Straight Cut Tool is designed to work with most all gate tubing up to 2” thick, this tool clamps down on the gate frame. The slot allows for a reciprocating saw blade to be inserted and used to cut completely through the frame. Hardened steel guides ensure you don’t cut the tool itself.Now Simply remove the tool, put it to the other mark to complete cutting the section of the fence out, and you are done! You are ready to install your gate box!
K-EOTEMERGENCY OVERRIDE
TIMER
Easy turn clamps, and a powder coated fi nish.
ut th ”n
awed he
des
Easy to install (fail safe)Power -10 to 30 volts accordingly
Ever been to a “gate stuck open” call, just to fi nd the only problem was the Fire Dept. switch was engaged?
With the New Keedex K-EOT Emergency Override Timer installed, the gate will close and reset 2 hours after fi re switch is acti-vated, reducing the calls you get about gates that won’t close (K-EOT still allows 24/7 access for emergency personnel).
• 4 Inch Projection
• Protects Keypads, Knobs and
Levers
• Weather Cover
• Spy Shield
• Sun Shield for Digita l Locks 5 3/4"
2 7/8"
K-BXCOV • PROTECTIVE LOCK COVER
CAN EITHER BE WELDED OR FASTENED
GATE BOX TOOLS
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 2525
K-GBJGATE BOX INSTALLATION JIG
The Gate Box Installation Jig will quickly become the must have tool for technicians who spend any amount of their work day installing gate-boxes. The jig attaches to the edge of the gate with 2 clamps. Then using the magnet squares included, you can hold your gate box in place, making it easy to put in to exact position and nudging it to precisely where it is desired. Now with the gate box in place, your hands are left free to weld, bolt or attach the gate box, minimizing the hassle of trying to hold and weld straight.Make your gate box install jobs look clean, precise and professional, and minimize the time necessary to complete the job, with the new Keedex Gate Box Installation Jig!
Free your hands! Work more effi ciently, and make your work
more precise!
Currently Accommodates All Keedex Boxes
LAMUST HAVEREVOLUTIONARY NEW TOOL!!!
Includes welders magnets!
Check out our video on
Keedex.com
or search for
Keedex on Youtube.com
GATE BOX TOOLS
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43032626
iCANACCESS CONTROL HOUSING
• 14 GAUGE WELDED STEEL ENCLOSURE• DURABLE POWDER COAT FINISH• STAINLESS STEEL FACE PLATE WITH TUBULAR KEY LOCK• ACCEPTS TWO SINGLE GANG DEVICES
Install a keypad & intercom.
Install a keyswitch & blank plate.
9 1/2"4 3/4"
5"
3 3/8"
The iCAN from Keedex allows you to install up to, two single gang devices. Use it to install an intercom & keypad, prox reader & key switch or a keypad & key switch for Fire, Police or Utility access. Can be used with a single device and a blank plate, allowing for future expansion. The iCAN allows you to install the hardware that you want to use.
Specifi cations:Dimensions: 9 1/2" wide, 5" high, 3 3/8" deepBox: 14 gauge steel. Finish: Powder Coat - Black (other colors available upon request)Face Plate: 18 gauge stainless steel. US32D fi nishLock: Tubular Key Lock
4
Knob Guard for gates. Helps protect knobs on gates. Installs without removing lock.Durable Aluminum powder coat fi nish. Diameter: 4 17/32” Height 3 1/2”
8” Knob Guard for gates. Helps prevent reaching around to access the knob. Durable Aluminum powder coat fi nish. Diameter: 4 17/32” Height 8”
8” Knob Guard for gates. Helps prevent reaching around to access the knob. Black powder coat fi nishDiameter: 4 17/32” Height 8”
GRD-8BLKGRD-8AGRD-KNOB
GATE BOX RELATED PRODUCTS
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 2727
GATE BOX RELATED PRODUCTS
Part Number Specialty/Material Backset Hole High Wide DeepK-BXRHO 2 3/4" 2 1/8" 4 1/8" 4 3/4" 1 3/4"
K-BXRHO-1012 Oversized Center+/Stop
2 3/4" 2 1/8" 12"
10"+ 1 1/2"
1 3/4"
K-BXRHO-8155 Oversized Offset 2 3/4" 2 1/8" 15 1/2" 8" 1 3/4"
K-BXRHO-925 Oversized Offset 2 3/4" 2 1/8" 9 1/4" 5 1/2" 1 3/4"
K-BXRHO-AL Aluminum 2 3/4" 2 1/8" 4 1/8" 4 3/4" 1 3/4"
K-BXRHO-SS Stainless Steel 2 3/4" 2 1/8" 4 1/8" 4 3/4" 1 3/4"
Part Number Specialty/Material Backset Hole High Wide DeepK-BXSGL 2 3/8" 2 1/8" 3 1/2" 4 1/4" 1 1/2"
K-BXSGL-NS No Stop 2 3/8" 2 1/8" 3 1/2" 4 3/4" 1 5/8"
K-BXSGL234 2 3/4" 2 1/8" 3 1/2" 4 3/4" 1 5/8"
K-BXSGL234-2D 2” box that accepts standard 1 3/4” hardware
2 3/4” 2 1/8” 3 1/2” 4 3/4” 2”
K-BXSGL234-10SP Heavy DutyReinforced
2 3/4" 2 1/8" 5 1/2" 5 1/2" 2"
K-BXSGL234-112 2 3/4" 1 1/2" 3 1/2" 4 3/4" 1 5/8"
K-BXSGL234-2W 2 3/4" 2 1/8" 3 1/2 " 4 3/4" 2"
K-BXSGL234-925 Oversize -No Stop 2 3/4" 2 1/8" 9 1/4" 5 1/2" 1 3/4"
K-BXSGL234-AL Aluminum 2 3/4" 2 1/8" 3 1/2" 4 3/4" 1 5/8"
K-BXSGL234-AL-2 Aluminum 2 3/4" 2 1/8" 3 1/2" 4 3/4" 2"K-BXSGL234-BEST Best 9K 2 3/4" 2 1/8" 3 1/2" 4 3/4" 1 5/8"
K-BXSGL234-NH No Holes,Latch Hole Only.
2 3/4" 3 1/2" 4 3/4" 1 5/8"
K-BXSGL234-NS No Stop 2 3/4" 2 1/8" 3 1/2" 4 3/4" 1 5/8"K-BXSGL234-SS Stainless Steel 2 3/4" 2 1/8" 3 1/2" 4 3/4" 1 5/8"K-BXSGL500 5" 2 1/8" 3 1/2" 7" 1 5/8"K-BXSGL-AL Aluminum 2 3/8" 2 1/8" 3 1/2" 4 3/4" 1 5/8"
K-BXSGL-ES Extra Slim 2 3/8" 2 1/8" 3 1/2" 4 1/2" 1"
K-BXSGL-S Slim 2 3/8" 2 1/8" 3 1/2" 4 1/4" 1 1/4"
Part Number Specialty/Material Backset Hole High Wide DeepK-BXDBL 2 3/8" 2 1/8" 6 7/8" 4 1/2" 1 5/8"
K-BXDBL234 Holes, 4" Center Schlage H Series
2 3/4" 2 1/8" 8 5/8" 4 3/4" 1 5/8"
K-BXDBL234-2D 2” box that accepts standard 1 3/4” hardware
2 3/4” 2 1/8” 8 5/8” 4 3/4” 2”
K-BXDBL234-2D-AL 2” box that accepts standard 1 3/4” hardware
2 3/4” 2 1/8” 8 5/8” 4 3/4” 2”
K-BXDBL234-2W Holes, 4" Center Schlage H Series
2 3/4" 2 1/8" 8 5/8" 4 3/4" 2"
K-BXDBL234-AL AluminumHoles 4" Center
2 3/4" 2 1/8" 8 5/8" 4 3/4" 1 5/8"
K-BXDBL234-AL-2 AluminumHoles, 4" Center
2 3/4" 2 1/8" 8 5/8" 4 3/4" 2"
K-BXDBL234-NH No Cyl. Holes, 2 Latch Holes Only
NONE NONE 8 5/8" 4 3/4" 1 5/8"
K-BXDBL234-SS Holes, 4” Center Schlage H Series
2 3/4” 2 1/8” 8 5/8” 4 3/4” 1 5/8”
WHAT IS A RHO PREP?
2 1/8" Cylindrical
Hole with 6 Thru-
Bolt HolesAround It
2 3/4" Backset
K-BXRHO
K-BXSGL
K-BXDBL
BBBBBBBaaccckkkkkkkkksssssssssseett
Weldable Gate Boxes Single and Double Cylindrical Boxes
K-SGL234-2D
K-BXDBL234-2D
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43032828
GATE BOX CROSS REFERENCE
LOCK MANUFACTURE PART NUMBER OUR BOX PART # OTHER MATERIALS
ADAMS RITE ALUMINUM STAINLESS
4511 -31/32” K-BXA/R-31/32”
4511-1 1/2” K-BXA/R-1 1/2”
4511-1 1/8” K-BXA/R AL
4710 -31/32” K-BXA/R-31/32”
4710-1 1/2” K-BXA/R-1 1/2”
4710-1 1/8” K-BXA/R AL
4711 -31/32” K-BXA/R-31/32”
4711-1 1/2” K-BXA/R-1 1/2”
4711-1 1/8” K-BXA/R AL
1850S-1 1/2” NO HOLES K-BXA/R-NH
1850S-1 1/8” NO HOLE K-BXA/R-NH
1850S-31/32” K-BXA/R-31-32”
1850S-1 1/2” K-BXA/R-1 1/2”
1850S-1 1/8” K-BXA/R AL
1851S-31-32” K-BXA/R-31/32”
1851S-1 1/2” K-BXA/R-1 1/2”
1851S-1 1/8” K-BXA/R AL
1851S-1 1/2” NO HOLES K-BXA/R-NH
1851S-1 1/8’ NO HOLES K-BXA/R-NH
ADAMS RITE ELECTIRC STRIKES
7100, 7101 K-BXES3A AL
7140 K-BXES3A AL
7160 K-BXES3A AL
7170 K-BXES2 AL
7240 K-BXES3A AL
7270 K-BXES2 AL
ALARM LOCK
DL1250 with 1 1/8”BS K-BXA/R-E 1 1/8” Backset
DL2700(T2) W/MINOR MODIFICATION K-BXSIM AL SS
DL3000(3T) W/MINOR MODIFICATION K-BXSIM AL SS
DL5200, Dl5300 and PDL 5300 K-BXSIM AL SS
ETPDL W/ VON DURPIN 99 EXIT K-BXED-ETPDLV99
ANSI STRIKE
WELDABLE BRACKET
ANSI LARGE STRIKE K-BXSTR SS
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 2929
GATE BOX CROSS REFERENCE
BOX 1 1/2” DEEP K-BXES16
ARROW
N40 DEADLOCK W/MOD DRILL THUMB ONLY K-BXMOR-CDL-4000
N41 DEADLOCK W/MOD DRILL THUMB ONLY K-BXMOR-CDL-4000
N43 DEADLOCK W/MOD DRILL THUMB ONLY K-BXMOR-CDL-4000
N44 DEADLOCK W/MOD DRILL THUMB ONLY K-BXMOR-CDL-4000
ASSA/ABLOY HOSPITALITY
VINGCARD K-BXVING AL
BALDWIN
ALL K-BMOR5
BATON
1900 K-BXMOR5
BEST/STANLEY
BEST 93KV K-BXEST-93KV
63K, 73K, 83K, 93K, LB, 2 3/4”BS - 2 1/8” HOLE K-BXSGL234-BEST
3H4, 37H, 45H, 47H MORTISE LOCKS K-BXMOR2
38HM DEADBOLT MORTISE LOCK K-BXMOR-BES38HM
CAL- ROYAL EXIT DEVICES
F2200 W/ENT-00L K-BXEDCR
F2200 W/STR-05L K-BXEDCR
F2200 W/PAS-30L TRIM K-BXEDCR
F2260V W/ENT-00L K-BXEDCR
F2260V W/STR-05L K-BXEDCR
F2260V W/PAS-30L TRIM K-BXEDCR
CODELOCKS
100 K-BXULT
200 K-BXULT
300 K-BXULT
410 2 3/8” Backset K-BXDIG23 AL
415 2 3/8” Backset K-BXDIG23 AL
460 1 1/8” Backest K-BXA/R-EC
465 1 1/8” Backset K-BXA/R-EC
500, 510, 515 W/ 2 3/4” Backset K-BXCL500
2000W/LBFR70 Latch 2 3/4” Backset K-BXCL4000
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43033030
GATE BOX CROSS REFERENCE
4000 W/LBFR70 Latch 2 3/4” Backset K-BXCL4000
5000 K-BXSIM AL SS
COMPUTERIZED SECURITY SYSTEM/SAFLOK
CONFIDANT K-BXSAF-4
L CLASS K-BXSAF-R22330 AL
M CLASS K-BXSAF-R22340 AL
MICRO CARD K-BXSAF-MICRO AL
MT K-BXSAF-MT
SAFLOK 2500 CLASSIC K-BXSAF-2500 AL
SAFLOK 2500 CLASSIC K_BXSAF-2500-2W AL
SAFLOC SRS K-BXSAF-MICRO AL
SAFLOK V (ROMAN NUMBERAL 5) K-BXSAF-V
CORBIN/RUSSWIN
5000 MORTISE SERIES K-BXMOR2
ML2000 MORTISE LOCKS K-BXMOR2
DIGITAL SYSTEM
2210 2 3/8” Backset K-BXDIG 23 AL
2230 2 3/8” Backset K-BXDIG 23 AL
2330 2 3/8” Backset K-BXDIG 23 AL
3235 2 3/8” Backset K-BXDIG 23 AL
EFF ELECTRIC STRIKES
11BS K-BXES1
33 K-BXES1
41 K-BXES1
51 K-BXES1
53 K-BXES1
3314 K-BXES1
7114 K-BXES1
FALCON
M SERIES K-BXMOR2
FOLGER ADAMS ELECTRIC STRIKES
310-2 K-BXES10
310-2 3/4” (1/8” THICK STEEL) KBXES7
640 K-BXES12
712 K-BXES4 AL
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 3131
GATE BOX CROSS REFERENCE
712-75 K-BXES4 AL
H.E.S ELECTRIC STRIKES
1003 K-BXES5
1006 K-BXES5
4500 K-BXES45
5000U W/501 OPTION K-BXES3A AL
5900 K-BXES16
7001 W/ 701 OPTION K-BXES6
7501 K-BXES9
IEI
DOOR GUARD LS1 K-BXMAR-IQ AL
CM5196 K-BXMAR-IQ AL
CM5100 K-BXMAR-IQ AL
LS-2PM, LS-2PD MORTISE K-BXIEI-LS
INTELLIKEY
LEFT HAND K-BXINT-L SS
RIGHT HAND K-BXINT-R SS
F81/F82 (100106, 101306, 100108) K-BXRHO AL SS
F86 (100097, 100088, 101305) K-BXRHO AL SS
KABA ILCO
200 SERIES 904 2 3/8” BS K-BXSIM-200 AL
200 SERIES 905 2 3/8” BS K-BXSIM-200 AL
200 SERIES 918 2 3/8” BS K-BXSIM-200 AL
200 SERIES 919 2 3/8” BS K-BXSIM-200 AL
1000 K-BXSIM AL SS
1000EE K-BXSIM-EE AL SS
E2000 CYLINDRICAL K-BXE2000
E2000 MORTISE K-BXIL
4000 *DRILL HOLE FOR (710-850-950) K-BXSIM-4000 AL
5000 K-BXSIM AL SS
E-PLEX 5X00 CYLINDRICAL K-BXSIM AL SS
6000 SERIES 2 3/4” BS K-BXSIM-6000
6200 SERIES 2 3/8” BS K-BXSIM-6218
7004 2 3/4” BS K-BXSIM-7004 AL
7014 2 3/4” BS K-BXSIM-7004 AL
7104 2 3/4” BS K-BXSIM-7004 AL
700II MORTISE K-BXIL
710 SOLITRE MORTISE K-BXIL-710
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43033232
GATE BOX CROSS REFERENCE
710-II MORTISE K-BXIL-710II
E760 MORTISE K-BXIL
E760 CYLINDRICAL K-BXE2000
E770 MORTISE K-BXIL
ORACODE K-BXIL
KABA/ILCO EXIT DEVICE
721 W/ARROW RIM EXIT DEVICE K-BIL-721
KABA MAS(MAS-HAMILTON)
POWER LEVER K-BXMAS
LOCKNETICS
KC9111 K-BXA/R-E 1 1/8” BS
CM 5196 K-BXMAR-IQ AL
LS-1 DOOR GUARD K-BXMAR-IQ AL
KC9111 NARROW MORTISE K-BXA/R-E 1 1/8” BS
PRO5100 CYLINDRICAL K-BXLOC5100
MPC K-BXCOB AL
MARKS
IQUE IQ1K CYLINDRICAL K-BXMAR-IQ AL
22AC MORTISE K-BXMOR6
ML2000 MORTISE K-BXMOR2-MR3000M
3000M MORTISE K-BXMOR2-MR3000M
IQ2K MORTISE K-BXIEI-LS
MISCELLANEOUS
BLANK BOXES FOR MOUNTING PANICS
K-BX453525 5 1/2” X 3 1/2” X 2 1/2”
K-BX458175 4 1/2” X 8” X 1 3/4”
K-BX515175 5’ X 15” X 1 3/4”
K-BX711150 7’ X 11” X 1 1/2”
MONUMENT
2210 K-BXMON
NUTONE
DR-1 K-BXES8
ONITY/TESA
READER EXIT DEVICE K-BX95552 AL
CYLINDRICAL K-BXTESA-CYL AL
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 3333
GATE BOX CROSS REFERENCE
MORTISE K-BXTESA-MOR AL
OMNIA
N41 W/MOD.DRILL THUMB TURN ONLY K-BXMOR-CDL-4000
OSI
OMI00 K-BXOMNI-CYL
OM300 K-BXOMNI-CYL
OM500 K-BXOMNI-CYL
OM2000
WALL MOUNT BRACKET K-BXOMNI-WM
OVERSIZED CYLINDERICAL BOXES
5 1/2” X 9 1/4” X 1 3/4” PREP NR BOTTOM K-BXRHO-925
5 1/2” X 9 1/4” X 1 3/4” PREP NR BOTTOM K-BXRHO-925
10” X 12” LEVER PREP CENTERED 2 3/4” BS K-BXRHO-1012
8” X 15 1/2” LEVER PREP NEAR BOTTOM K-BXRHO-8155
5 1/2” X 9 1/4” X 1 3/4” LATCH PREP K-BXSIM-NH (NO HOLES)
OVERSIZED MORTISE BOXES
8” X 15 1/2” MORTISE PREP CENTER K-BXMOR8155
8” X 15 1/2” MORTISE PREP OFFSET K-BXMOR8155F
PRESTO-MATIC LOCK
WELDABLE GATE BOX K-BXPRES
RCI
4104 K-BXES2
4304 K-BXES2
S6514 K-BXES6
7104 K-BXES2
7304 K-BXES2
SALTO SYSTEMS
CYLINDRICAL K-BXSAL-C AL
MORTISE K-BXSAL-M AL
SARGENT
45 SERIES K-BXSAR45
4874 MORTISE K-BXMOR-SGT4874
7700 MORTISE K-BXMOR1 AL
7700 HEAVY DUTY MORTISE K-BXMOR1-10G
8100 MORTISE K-BXMOR1 AL
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43033434
GATE BOX CROSS REFERENCE
8100 HEAVY DUTY MORTISE K-BXMOR1-10G
SCHLAGE
LEVERSETS CYLINDRICAL ND SERIES K-BXRHO AL SS
FE475 K-BXRHO1012 w/Modication
H LOCKS INTERCONNECTED - 4” C to C K-BXDBL234 AL SS
H LOCKS INTERCONNECTED - 4” C to C K-BXDBL234-2W AL
L SERIES MORTISE K-BXMOR1 AL
L SERIES 10 GUAGE MORTISE K-BXMOR1-10G
L SERIES W/ESCUTION K-BXSAR45
WA5296 K-BXRHO8155 w/Modication
SECURTON
SABL K-BXSABL
ROFU ELECTRIC STRIKES
1106 K-BXES1
1402 K-BXES2 AL
1702 K-BXES2 AL
3402 K-BXES2 AL
TESA/ONITY
CYLINDRICAL K-BXTESA-CYL AL
MORTISE K-BXTESA-MOR AL
TRINE ELECTRIC STRIKES
OO1 K-BXES8
OO5 K-BXES1
ULTRA
PUSH BUTTON LOCK 44760 K-BXULT
PUSH BUTTON LOCK 44765 K-BXULT
PUSH BUTTON LOCK 44770 K-BXULT
VING LOCK K-BXVING AL
VINGCARD
VING LOCK K-BXVING AL
VON DUPRIN ELECTRIC STRIKES
3140 K-BXES4 AL
5100 K-BXES51
6112 K-BXES14
6211 K-BXES4 AL
6214 K-BXES7
6215 K-BXES10
6224 K-BXES7
6226 K-BXES10
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 3535
GATE BOX CROSS REFERENCE
VON DUPRIN EXIT DEVICES
99 EXIT DEVICE W/ ALARM LOCK ETPDL K-BXED-ETPDLV99
99 EXIT DEVICE W/990NL TRIM K-BXED-V990NL
99 EXIT DEVICE W/992L & 996L TRIM K-BXED-V992L
99 EXIT DEVICE W/994L & 996L TRIM K-BXED-V992L
WINFIELD MICROKEY
TUBULAR 1000 SERIES K-BXWIN
YALE
46 / ALSO HEAVY DUTY 10G K-BXMOR1
46 / ALSO HEAVY DUTY 10G K-BXMOR1
4800LN (INTERCONNECTED - 4” C to C) K-BXDBL234 AL SS
4800LN ( INTERCONNECTED - 4” C to C) K-BXDBL234-2W AL
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43033636
GATE BOX CROSS REFERENCE
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 3737
GATE BOX CROSS REFERENCE
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43033838
GATE BOX INFORMATION
Part Number Specialty/Material A B CK-BX246 w/Removable Lid 6" 4" 2"K-BX453525 4 1/2" 3 1/2" 2 1/2"K-BX458175 Oversized 8" 4 1/2" 1 3/4"K-BX515175 Oversized 15 1/2" 5" 1 3/4"K-BX711150 Oversized 11" 7" 1 1/2"
Part Number Description High Wide DeepK-BXMOR4 Centered 8 1/8" 4 5/8" 1 3/4"K-BXMOR4-AL Aluminum 8 1/8" 4 5/8" 1 3/4"K-BXMOR8155 Oversized Center 15 1/2" 8" 1 3/4"K-BXMOR8155F Oversized Offset 15 1/2" 8" 1 3/4"
Blank mort ise boxes were designed to accommodate just about any t ype of stand a lone access or push but ton mort ise lock . With a standard side mort ise preparat ion (1 1/16" x 6 11/16") only dr i l l ing the mounting holes is necessar y on the face of the box. The boxes are wide enough for lever appl icat ions.
UNIVERSAL MORTISE GATE BOXES
BLANK WELDABLE BOXES
A
B C
Great for mounting panic hardware!Oversize compensates for access keypads or lever hardware
Offset Centered
dware
TOP SELLERS BY COLOR
Best SellersGreat SellersGood Sellers
While Keedex offers over 180 weldable gate boxes, all of exceptional quality, we have indicated some of our most commonly sought after boxes with the coloring system shown below.
Understanding Gate Box Stock NumbersHow to use the gate box guide:If you know the manufacturer and stock number of the lock or elec-tric strike you are trying to install, use the cross reference. The cross reference uses the lock or strike manufacturers numbers and then tells you which of our weldable boxes is best for that application. Keedex.com has the most current cross reference and notes.If you still cannot fi nd an ap-propriate box, call us @ (714) 993-4300 and we will be glad to assist you!
SGL 1- 2 1/8” Cylindrical Hole NH No Holes
DBL 2- Cylindrical 2 1/8” Holes 2W/-2 2” Wide Box
RHO 2 1/8” Cylindrical Hole With 6 Thru-Bolt Holes Around 2 3/4” Backset
-2D 2” Wide Box With Cylindrical Hole Sunken To Accept A Standard 1 3/4” Lock
MOR Mortise Side Pocket A/R Narrow Style Mortise Lock
AL .125 Gauge Aluminum CYL Cylindrical Prep
SS 16 Gauge Stainless Steel -925 9 1/4” High
234 2 3/4” Backset -8155 8” X 15 1/2”
S Slim 1 1/4” Wide -1012 10” X 12”
-ES Extra Slim 1” Wide BXES Electric Strike Prep
NS No Stop BXED Exit Device
All Boxes Are 14 Gauge Steel Unless Otherwise Noted
For boxes in materials other than 14 gauge steel add a dash and the suffi x for the material ex: The K-BXMOR1, in 10 gauge steel would be K-BXMOR1-10G, Aluminum would be K-BXMOR1-AL
Depth = thickness, as in thickness of a door
New Box!
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 3939
K-BX246
WIDTH HEIGHT DEPTHINCHES 4 ” 6” 2”TYPE
BACKSET
MATERIAL14 GAUGE STEELNOTE: WELDABLE BOX W/ REMOVEABLE LID
K-BX458175
WIDTH HEIGHT DEPTHINCHES 4 1/2” 8” 1 3/4”TYPE
BACKSET
MATERIAL14 GAUGE STEELNOTE: BLANK BOX
K-BX515175
WIDTH HEIGHT DEPTHINCHES 5” 15” 1 3/4”TYPE
BACKSET
MATERIAL14 GAUGE STEELNOTE: BLANK BOX
K-BX515175-AL
WIDTH HEIGHT DEPTHINCHES 5” 15” 1 3/4”TYPE
BACKSET
MATERIAL .125” ALUMINUMNOTE: BLANK BOX
K-BX711150
WIDTH HEIGHT DEPTHINCHES 7” 11” 1 1/2”TYPE
BACKSET
MATERIAL14 GAUGE STEELNOTE: BLANK BOX
K-BX95552
WIDTH HEIGHT DEPTHINCHES 4 1/2” 8” 2”TYPE READERBACKSET
MATERIAL14 GAUGE STEELNOTE: SWITCH ON BACK
K-BX95552-AL
WIDTH HEIGHT DEPTHINCHES 4 1/2” 8” 2”TYPE READERBACKSET
MATERIAL.125” ALUMINUMNOTE: SWITCH ON BACK
K-BXAD
WIDTH HEIGHT DEPTHINCHES 5 1/2” 16” 1 3/4”TYPE CROSS PLATFORMBACKSET 2 3/4”MATERIAL14 GAUGE STEELNOTE:
K-BXA/R
WIDTH HEIGHT DEPTHINCHES 2 7/16” 8” 1 13/16”TYPE MORTISEBACKSET 1 1/8”MATERIAL14 GAUGE STEELNOTE: NARROW STYLE
K-BXA / R-AL
WIDTH HEIGHT DEPTHINCHES 2 7/16” 8” 1 13/16”TYPE MORTISEBACKSET 1 1/8”MATERIAL .125 ALUMINUMNOTE: NARROW STYLE
K-BXA/R / R-11 / 2
WIDTH HEIGHT DEPTHINCHES 2 7/16” 7” 1 13/16”TYPE MORTISEBACKSET 1 1/2”MATERIAL 14 GAUGE STEELNOTE: NARROW STYLE
K-BXA / R-31 /32
WIDTH HEIGHT DEPTHINCHES 2 7/16” 8” 1 13/16”TYPE MORTISEBACKSET 31/32”MATERIAL14 GAUGE STEELNOTE: NARROW STYLE
K-BXA / R-E
WIDTH HEIGHT DEPTHINCHES 2” 16” 1 3/4”TYPE MORTISEBACKSET 1 1/8”MATERIAL 14 GAUGE STEELNOTE: NARROW STLYE
K-BXA / R-EC
WIDTH HEIGHT DEPTHINCHES 2” 13” 1 3/4”TYPE MORTISEBACKSET 1 1/8”MATERIAL 14 GAUGE STEELNOTE: NARROW STYLE
K-BXA/R-NH
WIDTH HEIGHT DEPTHINCHES 2 1/16” 7” 1 13/16”TYPE MORTISEBACKSET
MATERIAL14 GAUGE STEELNOTE: NO HOLES
K-BXBEST-93KV
WIDTH HEIGHT DEPTHINCHES 7 3/4” 16” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
Photograph and Size Reference Guide
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43034040
K-BXCL4000
WIDTH HEIGHT DEPTHINCHES 5 1/2” 7 1/2” 1 3/4”TYPE
BACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: USE LBFR70 LATCH
K-BXCL500
WIDTH HEIGHT DEPTHINCHES 5 1/2” 8 1/2” 1 3/4”TYPE PRODUCT SPECIFICBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXCL500-AL
WIDTH HEIGHT DEPTHINCHES 5 1/2” 8 1/2” 1 3/4”TYPE PRODUCT SPECIFICBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXCOB
WIDTH HEIGHT DEPTHINCHES 5 1/2” 10 1/2” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXCOB-AL
WIDTH HEIGHT DEPTHINCHES 5 1/2” 10 1/2” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE:
K-BXCOV
WIDTH HEIGHT DEPTHINCHES 5 3/4” 2 7/8” 4”MATERIAL 14 GAUGENOTES: CAN BE BOLTED, SCREWED
OR WELDED. PROTECTS AGAINST
WIND, RAIN, VANDALISM.
K-BXDBL
WIDTH HEIGHT DEPTHINCHES 4 1/2” 6 7/8” 1 1/2”TYPE 2 1/8”CYLINDRICAL BACKSET 2 3/8”MATERIAL 14 GAUGENOTE: center to center 3 1/2”
K-BXDBL-S
WIDTH HEIGHT DEPTHINCHES 4 1/2” 6 1/2” 1 1/4”TYPE 2 1/8”CYL (Slim)BACKSET 2 3/8”MATERIAL 14 GAUGE STEELNOTE: center to center 3 3/8”
K-BXDBL-ES
WIDTH HEIGHT DEPTHINCHES 4 1/2” 7 1/2” 1”TYPE 2 1/8”CYL (Extra Slim) BACKSET 2 3/8”MATERIAL 14 GAUGE STEELNOTE: center to center 3 3/8”
K-BXDBL234
WIDTH HEIGHT DEPTHINCHES 4 3/4” 8 5/8” 1 1/2”TYPE 2 1/8”CYLINDRICAL BACKSET 2 3/4”MATERIAL 14 GAUGENOTE: center to center 4”
K-BXDBL234-2D
WIDTH HEIGHT DEPTHINCHES 4 3/4” 8 5/8” 2”TYPE 2 1/8”CYLINDRICAL BACKSET 2 3/4”MATERIAL 14 GAUGENOTE: 1/4” INSET/ center to center 4”
K-BXDBL234-2D-AL
WIDTH HEIGHT DEPTHINCHES 4 3/4” 8 5/8” 2”TYPE 2 1/8”CYLINDRICAL BACKSET 2 3/4”MATERIAL .125” ALUMINUMNOTE: 1/4” INSET/ center to center 4”
K-BXDBL234-2W
WIDTH HEIGHT DEPTHINCHES 4 3/4” 8 5/8” 2”TYPE 2 1/8”CYLINDRICAL BACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: center to center 4”
K-BXDBL234-AL
WIDTH HEIGHT DEPTHINCHES 4 3/4” 8 5/8” 1 1/2”TYPE 2 1/8”CYLINDRICAL BACKSET 2 3/4”MATERIAL .125” ALUMINUMNOTE: center to center 4”
K-BXDBL234-AL-2
WIDTH HEIGHT DEPTHINCHES 4 3/4” 8 5/8” 2”TYPE 2 1/8”CYLINDRICAL BACKSET 2 3/4”MATERIAL .125” ALUMINUMNOTE: center to center 4”
K-BXDBL234-NH
WIDTH HEIGHT DEPTHINCHES 4 3/4” 8 5/8” 1 5/8”TYPE ”CYLINDRICAL BACKSET
MATERIAL 14 GAUGE STEELNOTE: NO HOLES, ACCESS CONTROL
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 4141
K-BXDBL234-SS
WIDTH HEIGHT DEPTHINCHES 4 3/4” 8 5/8” 1 5/8”TYPE 2 1/8”CYLINDRICAL BACKSET 2 3/4”MATERIAL 16 GAUGE STAINLESS STEEL
NOTE: center to center 4”
K-BXDETBR2020
WIDTH HEIGHT DEPTHINCHES 4” 13” 1 3/4”TYPE MORTISEBACKSET
MATERIAL 8 GAUGE STEELNOTE: NARROW STYLE
K-BXDIG-1150
WIDTH HEIGHT DEPTHINCHES 4 3/4” 8 1/2” 1 3/4”TYPE CYINDRICALBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXDIG-1150-AL
WIDTH HEIGHT DEPTHINCHES 4 3/4” 8 1/2” 1 3/4”TYPE CYINDRICALBACKSET 2 3/8”MATERIAL .125” ALUMINUMNOTE:
K-BXDIG-DBL
WIDTH HEIGHT DEPTHINCHES 4 3/4” 6 1/2” N/ATYPE
BACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXDIG23
WIDTH HEIGHT DEPTHINCHES 4 3/4” 7 5/8” 1 3/4”TYPE
BACKSET 2 3/8”MATERIAL 14 GAUGE STEELNOTE:
K-BXDIG23-AL
WIDTH HEIGHT DEPTHINCHES 4 3/4” 7 5/8” 1 3/4”TYPE READERBACKSET
MATERIAL .125” ALUMINUMNOTE:
K-BXE2000
WIDTH HEIGHT DEPTHINCHES 5 1/2” 10” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXEDCR
WIDTH HEIGHT DEPTHINCHES 5 1/2” 8” 1 3/4”TYPE EXIT DEVICEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXED-D8
WIDTH HEIGHT DEPTHINCHES 8” 6 1/2” 1 3/4”TYPE EXIT DEVICEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXED-ETPDLV99
WIDTH HEIGHT DEPTHINCHES 5” 15” 1 3/4”TYPE EXIT DEVICEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXED-V22
WIDTH HEIGHT DEPTHINCHES 5 1/2” 8” 1 3/4”TYPE EXIT DEVICEBACKSET
MATERIAL .14 GAUGE STEELNOTE: 2 1/8” HOLE
K-BXED-V990NL
WIDTH HEIGHT DEPTHINCHES 5” 15” 1 3/4”TYPE EXIT DEVICEBACKSET
MATERIAL .14 GAUGE STEELNOTE:
K-BXED-V990L-AL
WIDTH HEIGHT DEPTHINCHES 5” 15” 1 3/4”TYPE EXIT DEVICEBACKSET
MATERIAL .125” ALUMINUMNOTE:
K-BXED-V992L
WIDTH HEIGHT DEPTHINCHES 5” 15” 1 3/4”TYPE EXIT DEVICEBACKSET
MATERIAL .14 GAUGE STEELNOTE:
K-BXED-V992L-AL
WIDTH HEIGHT DEPTHINCHES 5” 15” 1 3/4”TYPE EXIT DEVICEBACKSET
MATERIAL .125” ALUMINUMNOTE:
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43034242
K-BXED-WA
WIDTH HEIGHT DEPTHINCHES 5 1/2” 20 1/2” 1 3/4”TYPE Exit DeviceBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXES1
WIDTH HEIGHT DEPTHINCHES 3 3/4” 3 1/4” 1 9/16”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXES2
WIDTH HEIGHT DEPTHINCHES 2 3/8” 5 1/16” 1 3/4”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE: ANSI STRIKE
K-BXES2-AL
WIDTH HEIGHT DEPTHINCHES 2 3/8” 5 1/16” 1 3/4”TYPE ELECTRIC STRIKEBACKSET
MATERIAL .125 ALUMINUMNOTE: ANSI STRIKE
K-BXES3A
WIDTH HEIGHT DEPTHINCHES 2 3/8” 5 1/16” 1 3/4”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE: ANSI STRIKE
K-BXES3A-AL
WIDTH HEIGHT DEPTHINCHES 2 3/8” 5 1/16” 1 3/4”TYPE ELECTRIC STRIKEBACKSET
MATERIAL .125 ALUMINUMNOTE: ANSI STRIKE
K-BXES4
WIDTH HEIGHT DEPTHINCHES 2 3/8” 6 9/16” 2”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXES4-11G
WIDTH HEIGHT DEPTHINCHES 2 3/8” 6 9/16” 2”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 11 GAUGE STEELNOTE:
K-BXES4-AL
WIDTH HEIGHT DEPTHINCHES 2 3/8” 6 9/16” 2”TYPE ELECTRIC STRIKEBACKSET
MATERIAL .125 ALUMINUMNOTE:
K-BXES5
WIDTH HEIGHT DEPTHINCHES 2 3/8” 5 1/16” 1 3/4”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE: ANSI STRIKE
K-BXES6
WIDTH HEIGHT DEPTHINCHES 1 3/4” 5 1/2” 2 3/8”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE: ANSI STRIKE
K-BXES7
WIDTH HEIGHT DEPTHINCHES 2 5/8” 9 1/4” 2”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXES8
WIDTH HEIGHT DEPTHINCHES 1 1/2” 6 1/8” 2”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXES9
WIDTH HEIGHT DEPTHINCHES 2 3/8” 5 1/16” 1 3/4”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE: ANSI
K-BXES10
WIDTH HEIGHT DEPTHINCHES 2” 12” 2 7/16”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXES12
WIDTH HEIGHT DEPTHINCHES 2” 5” 3 1/4”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 4343
K-BXES14
WIDTH HEIGHT DEPTHINCHES 2 1/2” 9 1/2” 2 3/4”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXES16
WIDTH HEIGHT DEPTHINCHES 1 1/2” 5” 1 3/4”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE: ANSI STRIKE
K-BXES45
WIDTH HEIGHT DEPTHINCHES 2 3/8” 5 1/16” 1 1/2”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE: ANSI
K-BXES51
WIDTH HEIGHT DEPTHINCHES 2 3/8” 5 1/16” 1 1/2”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE: ANSI
K-BXES-EN400
WIDTH HEIGHT DEPTHINCHES 2 3/8” 5 1/8” 1 3/4”TYPE ELECTRIC STRIKEBACKSET
MATERIAL 14 GAUGE STEELNOTE: Trine Specifi c
K-BXGIB
WIDTH HEIGHT DEPTHINCHES 5” 11 7/8” 1 3/4”TYPE PRODUCT SPECIFICBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXIL
WIDTH HEIGHT DEPTHINCHES 5” 10” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXIL-AL
WIDTH HEIGHT DEPTHINCHES 5” 10” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE:
K-BXIL-710
WIDTH HEIGHT DEPTHINCHES 5” 14 1/2” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXIL-710-II
WIDTH HEIGHT DEPTHINCHES 5” 14 1/2” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXIL-710-IIAL
WIDTH HEIGHT DEPTHINCHES 5” 14 1/2” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE:
K-BXINT-L-SS
WIDTH HEIGHT DEPTHINCHES 2” 7” 1 3/4”TYPE MORTISEBACKSET
MATERIAL 16 GAUGE STAINLESS STEEL
NOTE:
K-BXINT-R
WIDTH HEIGHT DEPTHINCHES 2” 7” 1 3/4”TYPE MORTISEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXINT-R-SS
WIDTH HEIGHT DEPTHINCHES 2” 7” 1 3/4”TYPE MORTISEBACKSET
MATERIAL 16 GAUGE STAINLESS STEEL
NOTE:
K-BXLOC5100
WIDTH HEIGHT DEPTHINCHES 5 1/8” 12” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXMAR-IQ
WIDTH HEIGHT DEPTHINCHES 8” 14” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43034444
K-BXMAR-IQ-AL
WIDTH HEIGHT DEPTHINCHES 8” 14” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE:
K-BXMAR-IQ-SS
WIDTH HEIGHT DEPTHINCHES 8” 14” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 16 GAUGE STAINLESS STEEL
NOTE:
K-BXMAS
WIDTH HEIGHT DEPTHINCHES 5 1/2” 12 3/8” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXMON
WIDTH HEIGHT DEPTHINCHES 1 3/4” 7 1/8” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXMOR1
WIDTH HEIGHT DEPTHINCHES 4 5/8” 8 1/8” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXMOR1-10G
WIDTH HEIGHT DEPTHINCHES 4 5/8” 8 1/8” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 10 GAUGE STEELNOTE:
K-BXMOR1-AL
WIDTH HEIGHT DEPTHINCHES 4 5/8” 8 1/8” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE:
K-BXMOR2
WIDTH HEIGHT DEPTHINCHES 4 5/8” 8 1/8” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXMOR3
WIDTH HEIGHT DEPTHINCHES 4 5/8” 8 1/8” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXMOR3-10G
WIDTH HEIGHT DEPTHINCHES 4 5/8” 8 1/8” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 10 GAUGE STEELNOTE:
K-BXMOR4
WIDTH HEIGHT DEPTHINCHES 4 5/8” 8 1/8” 1 3/4”TYPE MORTISEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXMOR4-AL
WIDTH HEIGHT DEPTHINCHES 4 5/8” 8 1/8” 1 3/4”TYPE MORTISEBACKSET
MATERIAL .125 ALUMINUMNOTE:
K-BXMOR5
WIDTH HEIGHT DEPTHINCHES 4 5/8” 8 1/8” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXMOR6
WIDTH HEIGHT DEPTHINCHES 5” 7 7/8” 1 1/4”TYPE MORTISEBACKSET 2 1/2”MATERIAL 14 GAUGE STEELNOTE:
K-BXMOR8155
WIDTH HEIGHT DEPTHINCHES 8” 15 1/2” 1 3/4”TYPE MORTISEBACKSET
MATERIAL 14 GAUGE STEELNOTE: UNIVERSAL APPLICATIONS
K-BXMOR8155F
WIDTH HEIGHT DEPTHINCHES 8” 15 1/2” 1 3/4”TYPE MORTISEBACKSET
MATERIAL 14 GAUGE STEELNOTE: UNIVERSAL APPLICATIONS
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 4545
K-BXMOR8155F-AL
WIDTH HEIGHT DEPTHINCHES 8” 15 1/2” 1 3/4”TYPE MORTISEBACKSET
MATERIAL .125 ALUMINUMNOTE: UNIVERSAL APPLICATIONS
K-BXMOR-CDL4000
WIDTH HEIGHT DEPTHINCHES 4 1/4” 4 1/2” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXMOR-BST38HM
WIDTH HEIGHT DEPTHINCHES 4 5/8” 5 5/8” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXMOR-MR3000M
WIDTH HEIGHT DEPTHINCHES 4 3/8” 4 7/8” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXMOR-SGT4874
WIDTH HEIGHT DEPTHINCHES 4 1/2” 4 7/8” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXOMNI-CYL
WIDTH HEIGHT DEPTHINCHES 5 1/2” 10 3/4” 1 3/4”TYPE PRODUCT SPECIFICBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: UNIVERSAL APPLICATIONS
K-BXOMNI-WM
WIDTH HEIGHT DEPTHINCHES 5 3/4” 11 1/2” 1 3/4”TYPE CYLINDRICALBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXPRES
WIDTH HEIGHT DEPTHINCHES 4 3/4” 7” 1 3/4”TYPE
BACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXRHO
WIDTH HEIGHT DEPTHINCHES 4 3/4” 4 1/8” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: Leversets with thru-bolts
K-BXRHO-1012
WIDTH HEIGHT DEPTHINCHES 12” 10” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: Leversets with thru-bolts
K-BXRHO-8155
WIDTH HEIGHT DEPTHINCHES 8” 15 1/2” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: Leversets with thru-bolts
K-BXRHO-925
WIDTH HEIGHT DEPTHINCHES 5 1/2” 9 1/4” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: Leversets with thru-bolts
K-BXRHO-AL
WIDTH HEIGHT DEPTHINCHES 4 3/4” 4 1/8” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE: Leversets with thru-bolts
K-BXRHO-SS
WIDTH HEIGHT DEPTHINCHES 4 3/4” 4 1/8” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 16 GAUGE STAINLESS STEEL
NOTE: Leversets with thru-bolts
K-BXSABL
WIDTH HEIGHT DEPTHINCHES 5 1/2” 13 1/2” 1 3/4”TYPE PRODUCT SPECIFICBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXSAF
WIDTH HEIGHT DEPTHINCHES 4 5/8” 11” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43034646
K-BXSAF-2500
WIDTH HEIGHT DEPTHINCHES 5” 11 7/8” 1 3/4”TYPE PRODUCT SPECIFICBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXSAF-2500-AL
WIDTH HEIGHT DEPTHINCHES 5” 11 7/8” 1 3/4”TYPE
BACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE:
K-BXSAF-4
WIDTH HEIGHT DEPTHINCHES 5” 11 7/8” 1 3/4”TYPE
BACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXSAF-MIC-AL
WIDTH HEIGHT DEPTHINCHES 4 1/2” 9 3/4” 1 3/4”TYPE
BACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE:
K-BXSAF-MICRO
WIDTH HEIGHT DEPTHINCHES 4 1/2” 9 3/4” 1 3/4”TYPE
BACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXSAF-MT
WIDTH HEIGHT DEPTHINCHES 4 1/2” 9 3/4” 1 3/4”TYPE MORTISEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXSAF-R22330
WIDTH HEIGHT DEPTHINCHES 5” 11 7/8” 1 3/4”TYPE
BACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXSAF-R22430
WIDTH HEIGHT DEPTHINCHES 5” 11 7/8” 1 3/4”TYPE
BACKSET 2 3/4”MATERIAL .125” ALUMINUMNOTE:
K-BXSAF-R22340
WIDTH HEIGHT DEPTHINCHES 5” 11 7/8” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXSAF-R22440
WIDTH HEIGHT DEPTHINCHES 5” 11 7/8” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL .125” ALUMINUMNOTE:
K-BXSAL-C
WIDTH HEIGHT DEPTHINCHES 8” 13 1/2” 1 3/4”TYPE PRODUCT SPECIFICBACKSET 2 1/8”MATERIAL 14 GAUGE STEELNOTE: SALTO SYSTEMS
K-BXSAL-CAL
WIDTH HEIGHT DEPTHINCHES 8” 13 1/2” 1 3/4”TYPE CYLINDRICALBACKSET 2 1/8”MATERIAL .125 ALUMINUMNOTE:
K-BXSAL-M
WIDTH HEIGHT DEPTHINCHES 8” 13 1/2” 1 3/4”TYPE MORTISEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXSAL-MAL
WIDTH HEIGHT DEPTHINCHES 8” 13 1/2” 1 3/4”TYPE MORTISEBACKSET
MATERIAL .125 ALUMINUMNOTE:
K-BXSAR45
WIDTH HEIGHT DEPTHINCHES 6 1/4” 14” 1 3/4”TYPE MORTISEBACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXSGL
WIDTH HEIGHT DEPTHINCHES 4 1/2” 3 1/2” 1 1/2”TYPE CYLINDRICALBACKSET 2 3/8”MATERIAL 14 GAUGE STEELNOTE: Standard Cylindrical Locka
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 4747
K-BXSGL-AL
WIDTH HEIGHT DEPTHINCHES 4 1/2” 3 1/2” 1 1/2”TYPE CYLINDRICALBACKSET 2 3/8”MATERIAL .125 ALUMINUMNOTE: Standard Cylindrical Locks
K-BXSGL500
WIDTH HEIGHT DEPTHINCHES 7” 3 1/2” 1 5/8”TYPE CYLINDRICALBACKSET 5”MATERIAL 14 GAUGE STEELNOTE: Standard Cylindrical Locks
K-BXSGL-S
WIDTH HEIGHT DEPTHINCHES 4 1/4” 3 1/2” 1 1/4”TYPE CYLINDRICALBACKSET 2 3/8”MATERIAL 14 GAUGE STEELNOTE: Cylindrical Locks (Slim)
K-BXSGL-ES
WIDTH HEIGHT DEPTHINCHES 4 1/2” 4 7/16” 1”TYPE CYLINDRICALBACKSET 2 3/8”MATERIAL 14 GAUGE STEELNOTE: Cylindrical Locks (Extra Slim)
K-BXSGL-NS
WIDTH HEIGHT DEPTHINCHES 4 3/4” 3 1/2” 1 5/8”TYPE CYLINDRICALBACKSET 2 3/8”MATERIAL 14 GAUGE STEELNOTE: NO STOP
K-BXSGL234
WIDTH HEIGHT DEPTHINCHES 4 3/4” 3 1/2” 1 5/8”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: Standard Cylindrical Locks
K-BXSGL234-AL
WIDTH HEIGHT DEPTHINCHES 4 3/4” 3 1/2” 1 5/8”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE: Standard Cylindrical Locks
K-BXSGL234-10SP
WIDTH HEIGHT DEPTHINCHES 5 1/2” 5 1/2” 2”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 10 GAUGE STEELNOTE: Standard Cylindrical Locks
K-BXSGL234-112
WIDTH HEIGHT DEPTHINCHES 4 3/4” 3 1/2” 1 5/8”TYPE CYLINDRICAL 1 1/2”BACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: 1 1/2” Cylindrical Lock
K-BXSGL234-2D
WIDTH HEIGHT DEPTHINCHES 4 3/4” 4 1/8” 2”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: Standard Cylindrical Locks
K-BXSGL234-2D-AL
WIDTH HEIGHT DEPTHINCHES 4 3/4” 4 1/8” 2”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE: Standard Cylindrical Locks
K-BXSGL234-2W
WIDTH HEIGHT DEPTHINCHES 4 3/4” 4 1/8” 2”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: Standard Cylindrical Locks
K-BXSGL234-AL-2
WIDTH HEIGHT DEPTHINCHES 4 3/4” 4 1/8” 2”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE: Standard Cylindrical Locks
K-BXSGL234-925
WIDTH HEIGHT DEPTHINCHES 5 1/2” 9 1/4” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: Standard Cylindrical Locks
K-BXSGL234-BEST
WIDTH HEIGHT DEPTHINCHES 4 3/4” 3 1/2” 1 5/8”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: Standard Cylindrical Locks
K-BXSGL234-FE
WIDTH HEIGHT DEPTHINCHES 5 1/2” 9 1/2” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: Standard Cylindrical Locks
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-43034848
K-BXSGL234-NH
WIDTH HEIGHT DEPTHINCHES 4 3/4” 3 1/2” 1 5/8”TYPE No HolesBACKSET
MATERIAL 14 GAUGE STEELNOTE: For latch w/ electric strikes
K-BXSGL234-NS
WIDTH HEIGHT DEPTHINCHES 4 3/4” 3 1/2” 1 5/8”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE: Standard Cylindrical Locks
K-BXSGL234-SS
WIDTH HEIGHT DEPTHINCHES 4 3/4” 3 1/2” 1 5/8”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 16 GAUGE STAINLESS STEEL
NOTE: Standard Cylindrical Locks
K-BXSIM
WIDTH HEIGHT DEPTHINCHES 5 1/2” 10 1/4” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXSIM-AL
WIDTH HEIGHT DEPTHINCHES 5 1/2” 9 1/4” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE:
K-BXSIM-SS
WIDTH HEIGHT DEPTHINCHES 5 1/2” 9 1/4” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 16 GAUGE STAINLESS STEEL
NOTE:
K-BXSIM-200
WIDTH HEIGHT DEPTHINCHES 4” 5 1/2” 1 3/4”TYPE
BACKSET
MATERIAL 14 GAUGE STEELNOTE:
K-BXSIM-200-AL
WIDTH HEIGHT DEPTHINCHES 4” 5 1/2” 1 3/4”TYPE
BACKSET
MATERIAL .125 ALUMINUMNOTE:
K-BXSIM-4000
WIDTH HEIGHT DEPTHINCHES 8” 14” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXSIM-4000-AL
WIDTH HEIGHT DEPTHINCHES 8” 14” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE:
K-BXSIM-6004
WIDTH HEIGHT DEPTHINCHES 5 1/2” 6 1/2” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXSIM-6218
WIDTH HEIGHT DEPTHINCHES 4 3/4” 6 1/2” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/8”MATERIAL 14 GAUGE STEELNOTE:
K-BXSIM-7004
WIDTH HEIGHT DEPTHINCHES 4 3/4” 6 1/2” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXSIM-7004-AL
WIDTH HEIGHT DEPTHINCHES 4 3/4” 6 1/2” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE:
K-BXSIM-EE
WIDTH HEIGHT DEPTHINCHES 5 1/2” 9 1/4” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXSIM-EE-AL
WIDTH HEIGHT DEPTHINCHES 5 1/2” 9 1/4” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE:
VISIT OUR WEBSITE @ WWW.KEEDEX.COMVISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-4303Tel: 714-993-4300 • Fax: 714-993-4303 4949
K-BXSIM-EE-SS
WIDTH HEIGHT DEPTHINCHES 5 1/2” 9 1/4” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 16 GAUGE STAINLESS STEEL
NOTE:
K-BXSIM-NH
WIDTH HEIGHT DEPTHINCHES 5 1/2” 9 1/4” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXSTR
WIDTH HEIGHT DEPTHINCHES 7/16” 5 1/16” 3/8”TYPE
BACKSET
MATERIAL 14 GAUGE STEELNOTE: ANSI STRIKE PREPARATION
K-BXSTR-SS
WIDTH HEIGHT DEPTHINCHES 1 3/4” 5 1/8” 3/8”TYPE
BACKSET
MATERIAL 16 GAUGE STAINLESS STEEL
NOTE: ANSI STRIKE PREPARATION
K-BXTESA-CYL
WIDTH HEIGHT DEPTHINCHES 8” 14” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXTESA-CYL-AL
WIDTH HEIGHT DEPTHINCHES 8” 14” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE:
K-BXTESA-MOR
WIDTH HEIGHT DEPTHINCHES 8” 14” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXTESA-MOR-AL
WIDTH HEIGHT DEPTHINCHES 8” 14” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE:
K-BXULT
WIDTH HEIGHT DEPTHINCHES 4 3/4” 8 1/4” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/8”MATERIAL 14 GAUGE STEELNOTE:
K-BXVING
WIDTH HEIGHT DEPTHINCHES 8” 13” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
K-BXVING-AL
WIDTH HEIGHT DEPTHINCHES 8” 13” 1 3/4”TYPE MORTISEBACKSET 2 3/4”MATERIAL .125 ALUMINUMNOTE:
K-BXWIN
WIDTH HEIGHT DEPTH
INCHES 5 1/8” 10 1/2” 1 3/4”TYPE CYLINDRICALBACKSET 2 3/4”MATERIAL 14 GAUGE STEELNOTE:
O u r A NSI s i z ed s t r i k e boxe s were m a d e s p e c i f i c a l l y f o r n a m e b r a n d manufacturers electric str ikes, however there are many obscure manufacturers of electr ic st r ikes. The Keedex ANSI electr ic st r ike boxes noted here are a l l 2 3/8” W x 5 1/16”H x 1 3/4”D, the d i f ference in each box is the cut out a l on g t h e f a c e s i d e . T h i s c h a r t i s designed to help you match our box w i t h y o u r n o n- b r a n d n a m e A N S I electr ic st r ikes.
Part Number Inches MillimetersK-BXES3A 0.656 16.5K-BXES2 0.92 23.3K-BXES5 1.73 43.9K-BXES6 1.21 30.7K-BXES9 1.5 38.1K-BXES45 1 25K-BXES51 1.05 26.7
Note on Electric Strikes
VISIT OUR WEBSITE @ WWW.KEEDEX.COMTel: 714-993-4300 • Fax: 714-993-430350
510 Cameron Street, Placentia, CA 92870510 Cameron Street, Placentia, CA 92870
K-22 Lever Opening Tool
K-EZR Herculite Reflective Screwdriver
DRLSR Door Laser Core Drilling Guide
K-HBL Hose Bibb Lock
K-6 CORMaster Follower-
Corbin Russwin Combo
Lit-M Moonlight Fiber Optic Scope Light
K-1 Safe Slick K-SSL-1P Heavy Duty Covered Garage Bolt
K-RP-M Metric Plus Roll Pin Kit
K-23 Scope for Mini-Flashlights
K-12SL Protect-A-LOK
K-20A Offset Style Guard
K-TMPA/R Installation Template Adams Rite
Page 17
Page 16
page 14 Page 3
Page 23
Page 4
Page 4 Page 5
Page 7Page 10
Page 11 Page 11
Page 20
K-3 Straight Shot Clip Removal Tool
Page 23
GRD-KNOB 4” Knob Guard
Page 26Page 22
ge 23
The Bottle Lock