Post on 15-Aug-2020
transcript
Released 2020 health.govt.nz
Code of Practice
for Irradiating
Apparatus
ORS C10
Citation: Ministry of Health. 2020. Code of Practice for Irradiating Apparatus: ORS
C10. Wellington: Ministry of Health.
Published in July 2020 by the Ministry of Health
PO Box 5013, Wellington 6140, New Zealand
ISBN 978-1-99-002906-6 (online)
HP 7420
This document is available at health.govt.nz
This work is licensed under the Creative Commons Attribution 4.0 International licence.
In essence, you are free to: share ie, copy and redistribute the material in any medium or
format; adapt ie, remix, transform and build upon the material. You must give
appropriate credit, provide a link to the licence and indicate if changes were made.
CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10 iii
Contents Introduction 1
Purpose and commencement 1
Scope 1
Contact 1
Roles and responsibilities 2
Definitions 3
Managing entity 6
General 6
Safety assessment 6
Facilities 7
Equipment 8
Training and authorisation 9
Restricted activities 9
Policies, procedures and local rules 9
Monitoring and measurement 10
Incidents, accidents and emergencies 12
Records 13
Other parties 14
Radiation safety officer 14
Qualified expert 14
Manufacturer/supplier 14
Servicing engineer 15
Appendix 1: Cross-reference to Radiation Safety Act 2016 16
Appendix 2: Training requirements 17
Appendix 3: Equipment requirements 19
General requirements 19
X-ray analysis equipment 19
X-ray inspection equipment 20
CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10 1
Introduction
Purpose and commencement This Code of Practice for Irradiating Apparatus (‘code’) is issued by the Director for
Radiation Safety (‘the Director’) under section 86 of the Radiation Act 2016 (‘the Act’). It
provides the operational information necessary to comply with the fundamental
requirements in sections 9 to 12 of the Act. Appendix 1 sets out cross-references
between clauses in this code and those fundamental requirements. The requirements
in this code do not limit the general nature of the fundamental requirements. This code
comes into force on 31 July 2020.
Scope This code applies to all activities associated with fixed and mobile irradiating apparatus
used for non-medical purposes such as analysis of structures; identification and
quantification of elements in materials; inspection of bags, mail, containers and other
items; and inspection of food items for foreign objects.
The use of irradiating apparatus for medical, veterinary, industrial radiography,
irradiation, or electron beam welding purposes is dealt with in separate codes of
practice.
Activities can include the manufacture, possession, control, management, use, storage,
import, export, sale, supply and disposal of irradiating apparatus.
The following issues are dealt with in separate codes of practice:
• safety of radioactive material in transport: ORS C6
• security of radioactive material in use, storage or transport: ORS C5.
Compliance with the code does not imply compliance in related areas such as
occupational safety, electrical safety, hazards in the workplace and resource
management.
Contact The Director’s contact details are:
Office of Radiation Safety
PO Box 5013
Wellington 6140
Email: orsenquiries@health.govt.nz
Fax: 04 496 2340
2 CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10
Roles and
responsibilities The following individuals and bodies have roles and responsibilities in relation to this
code.
Director for Radiation Safety – the individual appointed under section 76 of the Act
to perform functions and duties and exercise powers set out in the Act, including the
power to issue this code.
Managing entity – the legal entity that manages or controls irradiating apparatus and
must, therefore, obtain a source licence as required by section 13(a) of the Act.
Manufacturer/supplier – the person or organisation that designs, manufactures,
produces, constructs, assembles, installs, distributes, sells, exports or imports items of
irradiating apparatus or ancillary equipment that could influence the successful
outcome of a radiation procedure.
Qualified expert – an individual who is recognised as having expertise in a relevant
field of specialisation such as health physics or radiation safety.
Radiation safety officer – a person competent in radiation protection and safety who
the managing entity designates to oversee the application of regulatory requirements.
Servicing engineer – a person who has expertise in installing, servicing and
maintaining irradiating apparatus.
CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10 3
Definitions Defined terms are identified in bold and have the following meanings.
Accident – any unintended event, including operating errors, equipment failures and
other mishaps, the consequences or potential consequences of which are not
negligible from the point of view of protection and safety.
Ancillary equipment – equipment other than irradiating apparatus that has an
impact on the successful outcome of a radiation procedure, such as radiation
measurement equipment and local shielding.
Constraint – a prospective and source-related value of individual dose (dose
constraint) or of individual risk (risk constraint) that is used in planned exposure
situations as a parameter for the optimisation of protection and safety for the
source, and that serves as a boundary in defining the range of options in optimisation.
Constraints for occupational exposure and public exposure are established or
approved by the Director and, if established, are published in a compliance guide
issued under this code.
Controlled area – an area in which specific protection measures and safety provisions
are or could be required for controlling exposures in normal working conditions, and
preventing or limiting the extent of potential exposures.
Dose limit – the value of effective dose or equivalent dose set out in Schedule 3 of
the Act.
Effective dose – the tissue-weighted sum of equivalent doses in all specified tissues
and organs of the body.
Emergency – any non-routine situation that necessitates prompt action, primarily to
mitigate actual or perceived hazards or adverse consequences for human health and
safety, quality of life, property or the environment. This includes radiation
emergencies and conventional emergencies such as fires, release of hazardous
chemicals, storms or earthquakes.
Employer – the legal entity that employs workers. A self-employed person is regarded
as being both an employer and a worker.
Equivalent dose – the radiation-weighted dose in a tissue or organ of the body.
Facility – the location at which radiation procedures are performed and items of
irradiating apparatus are installed, used, handled or stored.
In-room protective device – device or equipment to reduce exposure to radiation but
not worn by a person, such as ceiling-suspended protective screens, protective lead
curtains, mobile shields and protective drapes.
Incident – any accident or other unintended event, including initiating events,
accident precursors, near misses or other mishaps; or unauthorised acts, malicious or
non-malicious, the consequences or potential consequences of which are not
negligible from the point of view of protection and safety.
4 CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10
Individual monitoring – monitoring using equipment worn by individuals.
Investigation level – value of a quantity such as effective dose at or above which an
investigation would be conducted.
Irradiating apparatus – electrical equipment that:
(a) is designed to generate ionising radiation such as X-rays, neutrons, electrons or
other charged particles, or
(b) produces ionising radiation as a byproduct:
(i) resulting in a dose equivalent rate of or exceeding 1 microsievert (µSv) per
hour at a point 0.1 metres from any accessible surface, and
(ii) that has a maximum energy of or exceeding 5 kiloelectronvolts.
Justify – determine that the expected benefits to individuals and society from
introducing or continuing a practice outweigh the harm, including the radiation
detriment, resulting from the practice. ‘Justifies’, ‘justified’ and ‘justification’ have
corresponding meanings.
Medical exposure – exposure to ionising radiation experienced by patients for the
purposes of medical diagnosis or medical treatment, by comforters/carers while
providing care, support or comfort to patients undergoing radiation procedures, and
by volunteers in a programme of biomedical research.
Member of the public – for purposes of protection and safety, any individual in the
population except when subject to occupational exposure or medical exposure.
Monitoring – the measurement of dose or dose rate to enable the assessment or
control of exposure due to radiation, and the interpretation of the results.
Occupational exposure – exposure of workers incurred in the course of their work.
Occupationally exposed person – any person who is subject to occupational
exposure.
Optimise – implement a level of protection and safety that results in the magnitude
of individual doses, the number of individuals (workers and members of the public)
subject to exposure and the likelihood of exposure being as low as reasonably
achievable, taking economic and social factors into account. ‘Optimises’, ‘optimised’
and ‘optimisation’ have corresponding meanings.
Personal protective equipment – equipment worn on the person to reduce their
exposure to radiation, such as a protective apron.
Planned exposure situation – situation of exposure that arises from the planned use
of irradiating apparatus or from a planned activity that results in an exposure due to
irradiating apparatus.
Potential exposure – possible future exposure that may result from an anticipated
operational occurrence or accident at a source or due to an event or sequence of
events of a probabilistic nature, including equipment faults and operating errors.
CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10 5
Protection and safety – the protection of people against exposure to ionising
radiation, the safety of irradiating apparatus, including the means for achieving this,
and the means for preventing accidents and the mitigation of consequences of
accidents if they do occur.
Protective equipment – personal protective equipment and in-room protective
devices.
Public exposure – exposure to ionising radiation experienced by a member of the
public but excluding any occupational exposure or medical exposure.
Radiation emergency – an emergency in which there is, or is perceived to be, a
hazard due to radiation exposure.
Radiation procedure – a procedure involving the use of irradiating apparatus.
Reportable incident – an incident resulting in (a) a dose limit being exceeded or
(b) irradiating apparatus that is lost, missing or beyond regulatory control.
Safety assessment – assessment of all aspects of a practice that are relevant to
protection and safety to determine the adequacy of provisions for protection and
safety.
Supervised area – an area other than a controlled area in which occupational
exposure conditions need to be kept under review, even though specific protection
measures or safety provisions are not normally needed.
Worker – an individual who works, whether full time, part time or temporarily, for the
managing entity and who has recognised rights and duties in relation to occupational
radiation protection. A self-employed person is regarded as being both an employer
and a worker.
Workplace monitoring – monitoring carried out in the working environment.
6 CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10
Managing entity
General 1. The managing entity must:
(a) take prime responsibility for protection and safety
(b) establish a management system to enhance protection and safety that
includes:
(i) effectively integrating protection and safety into the overall
management system of the organisation
(ii) making a commitment to protection and safety from the highest
level of management at the facility, and by providing all required
resources
(iii) promoting continuous improvement and a safety culture
(iv) appointing a radiation safety officer to oversee the application of
regulatory requirements for radiation protection and safety
(v) consulting with and engaging the services of qualified experts and
interested parties as necessary
(c) for all appointments under subclause 1(b)(iv):
(i) ensure appointees are notified of their duties in relation to
protection and safety and assume responsibility for performing them
(ii) fully document the appointments in a letter setting out duties and
countersigned by the appointee
(d) ensure that:
(i) all activities associated with irradiating apparatus are justified and
optimised for protection and safety
(ii) occupational dose constraints are established and applied for each
source or activity
(iii) dose limits for occupational and public exposure are not exceeded
as a result of those activities
(e) establish an annual review of the protection and safety management system
to assess its effectiveness and to verify compliance with the requirements in
this code.
Safety assessment 2. The managing entity must conduct, document and keep up to date a safety
assessment to:
CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10 7
(a) identify the ways in which occupational and public exposures could be
incurred
(b) determine the expected likelihood and magnitudes of exposures in normal
operation and, to the extent reasonable and practicable, assess potential
exposures
(c) assess the adequacy of provisions for protection and safety in respect of
siting, design and operation.
Facilities 3. The managing entity must:
(a) provide facilities that are sited, located, designed, manufactured, constructed,
assembled, shielded, commissioned, operated, maintained and
decommissioned in accordance with good engineering practice, taking into
account workload and minimising the need to rely on administrative controls
and personal protective equipment for protection and safety
(b) designate and delineate appropriate areas as controlled areas or supervised
areas and periodically review those designations and delineations
(c) restrict access as appropriate to controlled areas and supervised areas
(d) provide suitable means for exit so that any person inadvertently remaining in
a room containing irradiating apparatus can promptly exit the area
(e) shield or manage all areas in which irradiating apparatus that does not
comply with subclause 4(a)(iv) will be used or stored so that:
(i) no person can receive a dose exceeding 0.3 millisieverts (mSv) per
year from occupying areas outside the use and storage areas for the
irradiating apparatus
(ii) the dose rate at any point outside the use and storage areas is less
than 10 µSv per hour
(f) verify and document the adequacy of shielding at commissioning and
whenever circumstances change in ways that could increase the risks
(g) prominently display signs:
(i) specifying the actual or potential presence of ionising radiation
using the symbol recommended by the International Organization
for Standardization at access points to controlled areas and
supervised areas and at appropriate locations within controlled areas
(ii) controlling access by members of the public to controlled areas and
supervised areas.
8 CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10
Equipment 4. The managing entity must:
(a) provide, maintain, test and regularly service each item of irradiating
apparatus, protective equipment and ancillary equipment so that:
(i) it is fit for its intended purpose
(ii) it fulfils its design requirements for protection and safety
(iii) irradiating apparatus meets the requirements in Appendix 3
(iv) whenever irradiating apparatus is used or stored in areas that are
not shielded or managed in accordance with subclause 3(e), the
apparatus has sufficient shielding and interlocks so that no person
can receive an effective dose exceeding 0.3 mSv per year and the
dose rate in any occupied area is less than 10 µSv per hour
(v) the protective value of protective equipment is clearly displayed on
the equipment where applicable
(vi) the removal of any interlocked shielding component prevents X-ray
generation, and the replacement of such a component does not
allow X-ray generation until the equipment operation is reset
(b) prefer the use of fixed equipment over portable handheld equipment
whenever practicable and reasonable
(c) provide, as appropriate:
(i) protective equipment
(ii) equipment for individual monitoring and workplace monitoring
(d) maintain control of all items of irradiating apparatus to prevent loss or
damage and to prevent any person from carrying out unauthorised activities,
including by:
(i) maintaining an accurate inventory of all items of irradiating
apparatus, including their location and description
(ii) periodically checking that items of irradiating apparatus are under
control and in the locations recorded in the inventory maintained
under subclause 4(d)(i)
(iii) releasing irradiating apparatus only to people who are authorised to
assume management and control under the Act
(e) take immediate steps to regain control of any item of irradiating apparatus
that is abandoned, lost, misplaced, stolen or otherwise transferred without
proper authorisation.
(f) dispose of irradiating apparatus1 only if:
(i) it is rendered impracticable to restore the unit to a condition where
it is capable of producing radiation such as by puncturing the glass
tube within the X-ray head or destroying vital components
1 Any radioactive material, eg, activated components from accelerators, must be disposed of in accordance
with the Code of Practice for Unsealed Radioactive Material: ORS C11.
CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10 9
(ii) radiation signs such as trefoils are removed or obscured.
Training and authorisation 5. The managing entity must ensure that all people with responsibilities for
protection and safety:
(a) are qualified, educated and trained in protection and safety so that they
understand their duties and can perform them competently
(b) are suitably trained according to the training requirements set out in
Appendix 2, and receive regular refresher training
(c) are named in a current list with details of their qualifications, education and
training
(d) are notified in writing of their duties in relation to protection and safety
(e) are authorised to assume their roles and responsibilities.
Restricted activities 6. The managing entity must not, without the prior written approval of the Director,
allow irradiating apparatus to be used for human imaging:
(a) as a form of art or for publicity purposes
(b) for occupational, legal or health insurance purposes, and undertaken without
referring to clinical indication
(c) to detect concealed objects.
Policies, procedures and local rules 7. The managing entity must establish, implement and maintain policies and
procedures to meet the requirements of this code including, without limitation,
policies and procedures:
(a) to control access to areas where people can be exposed to radiation
(b) to prevent people from being exposed to the primary radiation beam
(c) to prohibit the bypass of safety interlocks in normal operating conditions
(d) to use constraints to optimise protection and safety
(e) to prevent accidents and mitigate the consequences of any that occur
(f) to report on and learn from accidents and other incidents
(g) to comply with operational limits and conditions relating to public exposure
10 CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10
(h) for staff who have indicated they may be pregnant to minimise unnecessary
exposure to the embryo or fetus
(i) to provide protection and safety by applying preventive measures in the
following hierarchy:
(i) engineered controls
(ii) administrative controls
(iii) personal protective equipment
(j) to set an investigation level and establish procedures to follow if such a level
is exceeded
(k) to implement the annual review of the protection and safety management
system.
8. The managing entity must maintain, publish and enforce any written local rules
that are necessary for protection and safety.
Monitoring and measurement 9. The managing entity must establish and maintain:
(a) a programme of continuous individual monitoring whenever appropriate,
adequate and feasible, which is sufficient to assess occupational exposures
for workers who usually work in a controlled area or who may receive a dose
exceeding 10 percent of the dose limits
(b) a programme of workplace monitoring that is sufficient to:
(i) evaluate radiation conditions in all workplaces
(ii) assess exposures in controlled areas and supervised areas that are
not assessed under subclause 9(a)
(iii) review the classification of controlled areas and supervised areas
(c) a capability that is sufficient to monitor unexpected increases in
radiation levels due to an incident attributed to a source or facility
for which the managing entity is responsible
(d) other monitoring or measurement programmes as necessary to verify
compliance with the requirements in this code.
CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10 11
10. To satisfy the monitoring and measurement requirements in clause 9, the
managing entity must:
(a) use appropriate monitoring equipment2
(b) for continuous individual monitoring under subclause 9(a), use an external
service that:
(i) maintains laboratory accreditation under ISO/IEC 17025 for ionising
radiation dosimetry; and
(ii) returns results to the managing entity within 20 working days of
receiving all necessary raw information.
11. The managing entity must:
(a) take all reasonable steps to obtain previous dose records
(b) maintain records of all monitoring and verification of compliance, including:
(i) records of occupational exposure during and after the worker’s
working life, at least until the worker attains or would have attained
the age of 75 years, and for not less than 30 years after ceasing work
where the worker was subject to occupational exposure
(ii) records and estimated doses to members of the public
(iii) records of the tests and calibrations of radiation monitoring
equipment carried out
(c) provide records of occupational exposure to:
(i) individual workers in respect of their own exposure
(ii) subsequent employers of workers, subject to satisfying
confidentiality criteria
(iii) the Director on request or if the managing entity is no longer able to
maintain records as required under subclause 11(b)
(d) provide records of source monitoring and environmental monitoring to
assess public exposure to:
(i) members of the public on request
(ii) the Director on request
(iii) the Director immediately, if any levels exceed operational limits and
conditions relating to public exposure or there is a significant
increase in dose rate that could be attributed to the authorised
practice.
2 Care should be taken to select the correct monitoring equipment for pulsed radiation fields, eg, an
ionisation chamber based survey meter.
12 CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10
Incidents, accidents and
emergencies 12. The managing entity must:
(a) take all practicable steps to minimise the likelihood of accidents, including by
using a multilevel system of sequential, independent provisions for
protection and safety, commensurate with the likelihood and magnitude of
potential exposures
(b) take timely action to mitigate the consequences of any accident that does
occur and restore radiation equipment to a safe condition
(c) promptly investigate any incident, including by:
(i) calculating or estimating doses a person has received and, if
applicable, the dose distribution within them
(ii) identifying corrective actions required to prevent a recurrence
(d) implement all corrective actions identified in subclause 12(c)(ii)
(e) keep a written record of the incident, including the:
(i) cause or suspected cause
(ii) calculations made under subclause 12(c)(i)
(iii) corrective actions identified under subclause 12(c)(ii)
(iv) details of the implementation of corrective actions under
subclause 12(d)
(f) notify any reportable incident to the Director as soon as is practicable but
not exceeding 48 hours.
13. If the safety assessment required by clause 2 indicates a reasonable likelihood of
an emergency affecting either workers or members of the public, the managing
entity must prepare an emergency plan to protect people and the environment,
which includes:
(a) arranging to promptly identify an emergency
(b) determining the correct level of emergency response
(c) providing individual monitoring and area monitoring and arranging for
medical treatment
(d) arranging to assess and mitigate any consequences of an emergency
(e) conducting drills and/or emergency exercises at appropriate intervals,
including the involvement of external parties if they are part of the
emergency plan.
CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10 13
Records 14. The managing entity must maintain adequate records, retain records for not less
than 10 years or as otherwise specified, and make them available as necessary,
including:
(a) the delegation of responsibilities of the managing entity
(b) the names of all people with responsibility for protection and safety,
including details of their qualifications, education and training
(c) annual review of the protection and safety management system
(d) cradle-to-grave records for sealed sources including the manufacturer’s
original documentation for not less than 10 years after sale, export or
disposal
(e) reports on investigations of unintended and accidental exposures
(f) exemptions from this code granted under section 86(3) of the Act.
14 CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10
Other parties
Radiation safety officer 15. The radiation safety officer must oversee the day-to-day implementation of
regulatory requirements by the managing entity, including:
(a) maintaining radiation source inventory records
(b) inspecting and maintaining engineering controls, safety features and warning
features
(c) overseeing access control for controlled areas
(d) establishing and periodically reviewing arrangements for personal dosimetry,
including maintaining and reviewing occupational dose records
(e) performing routine operational checks of radiation survey meters and
personal alarm monitors to ensure that the instruments are working properly
(f) ensuring that everyone with responsibilities for radiation protection and
safety is suitably trained in the use of irradiating apparatus and radiation
protection, and that they receive regular refresher training
(g) ensuring that emergency plans are established and practised
(h) supervising workplace monitoring arrangements
(i) establishing, issuing and periodically reviewing local rules
(j) investigating higher-than-usual exposures and overexposures
(k) investigating and reporting incidents, including accidents.
16. The radiation safety officer must work in close cooperation with qualified experts,
if engaged, to ensure that all necessary duties and tasks are performed.
Qualified expert 17. The qualified expert, if engaged, must work in close cooperation with the
radiation safety officer to ensure that all necessary duties and tasks are
performed.
Manufacturer/supplier
18. The manufacturer/supplier of radiation sources, protective equipment and
ancillary equipment must:
CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10 15
(a) supply well-designed, well-manufactured and well-constructed radiation
sources and equipment that:
(i) provide for protection and safety in line with the requirements of
this code
(ii) meet engineering, performance and functional specifications
(iii) meet quality standards appropriate to the significance of systems
and components, including software, for protection and safety
(iv) provide clear displays, gauges and instructions on operating
consoles
(b) test radiation sources and equipment to demonstrate compliance with
relevant specifications
(c) provide information on how to properly install and use radiation sources
and equipment and on associated radiation risks, including performance
specifications, instructions for operating and maintenance, and instructions
for protection and safety
(d) optimise the protection provided by shielding and other protective
equipment
(e) supply all radiation sources and equipment with all appropriate radiation
protection tools as a default, rather than as optional extras.
19. The manufacturer/supplier must
(a) make suitable arrangements with managing entities to share information
on use and operating experience that may be important for protection and
safety
(b) cooperate with the managing entity for the purpose of meeting the
requirements in clause 4.
Servicing engineer 20. The servicing engineer must:
(a) install and service irradiating apparatus competently, so that it complies
with the requirements in clause 4
(b) after installing or servicing the equipment, provide a written report to the
managing entity verifying that the equipment complies with this code and
describing:
(i) the equipment fault (if any)
(ii) the tests and measurements carried out
(iii) the work done and any adjustments made, including parts replaced
(iv) any changes that may affect protection and safety.
16 CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10
Appendix 1: Cross-
reference to Radiation
Safety Act 2016 As required by section 87(1) of the Radiation Safety Act 2016, clauses in this code apply
to the fundamental requirements in sections 9–12 of the Act as follows.
Section in Act Clauses in code
9(1) 1–2, 5–8, 16–18
9(2) 1–5, 7–11, 14–18
9(3) 1–5, 7–11, 16–18
10(1) 4, 7–8, 14–21
10(2) 4, 12–13
10(3) 4, 7–8, 14–21
11 4
12 4
CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10 17
Appendix 2: Training
requirements User Radiation
safety officer
Servicing
engineer
Qualified
expert
Atomic structure, X-ray production and
interaction of radiation
l l m h
Nuclear structure and radioactivity x x m h
Radiological quantities and units l l m h
Physical characteristics of irradiating
apparatus
m m m h
Fundamentals of radiation detection m m h h
Principle and process of justification l m x h
Fundamentals of radiobiology, biological
effects of radiation
l l l h
Risks of cancer and hereditary disease l l l h
Risks of deterministic effects l m l h
General principles of radiation protection,
including optimisation
m m m h
Operational radiation protection m h m h
Particular staff radiation protection aspects m h m h
Risks from fatal exposure l m l h
Quality control and quality assurance l m h h
National regulations and international
standards
m h h h
Level of knowledge
x – no requirement
l – low level of knowledge (general awareness and understanding of principles)
m – medium level of knowledge (basic understanding of the topic sufficient to
influence practices undertaken)
h – high level of knowledge (detailed knowledge and understanding sufficient to be
able to educate others)
18 CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10
Equivalence
Qualified expert: The training requirements for a qualified expert in this appendix are
deemed to be satisfied by Australasian Radiation Protection Accreditation Board
certification in radiation protection.
CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10 19
Appendix 3: Equipment
requirements
General requirements • An illuminated warning sign visible from all possible operator positions is:
– activated when the radiation beam is on
– interlocked with the generator so that failure of the lamp will terminate the
production of radiation.
• A durable and legible label is affixed showing the equipment model and serial number.
• Signage or labelling is affixed warning of the possible presence of radiation.
• The dose rate due to leakage and scatter radiation must be as low as reasonably
achievable and must not exceed 25 µSv per hour at any accessible surface on the
equipment when the irradiating apparatus is operated at any of the permitted
ratings specified by the manufacturer.
• Access is key-operated or password-protected to prevent unauthorised operation.
X-ray analysis equipment In addition to the general requirements above:
• it is not possible to remove shutters and their operating mechanisms without the
use of tools
• in normal operating conditions:
– it is not possible for any workers operating the equipment to be exposed to the
primary radiation beam, or
– a local rule is established and enforced to prevent any such exposure
• for X-ray diffraction equipment:
– each independently operated shutter has a distinct warning light, and is
interlocked so that it cannot open unless diffraction equipment, which will
completely intercept the primary beam, is in position at the beam port
– for all equipment that allows routing changing of samples in the path of the
primary X-ray beam, the sample position is not accessible when the beam is on
• for handheld XRF equipment, either:
– a proximity sensor prevents X-rays from being generated without a sample held
against the aperture, or
– where this is not practicable, a low-count (backscatter) interlock is fitted.3
3 Ideally, both safety systems should be fitted.
20 CODE OF PRACTICE FOR IRRADIATING APPARATUS: ORS C10
X-ray inspection equipment In addition to the general requirements above:
• the radiation beam can be precisely collimated
• interlocked systems can prevent inadvertent exposures, if applicable
• pre-set technique factors are available for each mode of operation
• emergency stop buttons are available, if applicable.