Cold Boot resistant, with predefined settings Kiosk …...Kiosk Moding • Bootloader executes every...

transcript

Cold Boot resistant, with predefined settings

Kiosk Moding

• Bootloader executes every line in

“\StorageCard\AutoExec.txt”,

•at Warm & Cold start

\StorageCard\install.exe

Install.exe Install.ini

Actions are deployed

More info on

Auto Installer

• INI contains the

commands to be executed

•“\StorageCard\AutoExec.txt”

\StorageCard\install.exe

Install.ini [SETTINGS]

DisableDesktop=1,DisableTaskbar=1

[NOASKREBOOT]

[EXECUTE]

//\Storagecard\12SummitSetup\12SummitSetup.exe,-r \Storagecard\12SummitSetup\SummitSetupMYBACKUP.reg

[ [COPY]

\StorageCard\12Monitor\12Monitor.lnk.lnk,windows\startup\12Monitor.lnk

\StorageCard\12Monitor\12Monitor.lnk.lnk,windows\Programs\12Monitor.lnk

\StorageCard\12Monitor\12Monitor.lnk.lnk,windows\Desktop\12Monitor.lnk

\StorageCard\scan2key.lnk,windows\startup\scan2key.lnk

[REGISTRY]

HKCU,ControlPanel\Desktop,Wallpaper,\Storagecard\HT650Admin.bmp,REG_SZ

•“\StorageCard\Install.ini”

•When SRD650 is Cold started, the install will be executed from Autoexec.

The install will check whether it did already run (like Warm Start), if it did not

run it will executed the commands from install.ini

[NOASKREBOOT]

[EXECUTE]

//\Storagecard\12SummitSetup\12SummitSetup.exe,-r \Storagecard\12SummitSetup\SummitSetupMYBACKUP.reg

[ [COPY]

[REGISTRY]

•“\StorageCard\Install.ini”

Disable operation during time

install.exe is executed

Reboot automatically after

install.exe is finished

Line is commented by //

Copy files

In this case shortcut file to

\Windows\Startup

This will assure 12Monitor is

started after the warmboot

Set registry key

Make sure the WiFi is connected

Open File Explorer (exit 12Monitor first),

Navigate to \Storagecard\12SummitSetup\12SummitSetup.exe

Reqd through the 3 help pages

Create the backup, change name as desired.

Create lines in install.ini

[EXECUTE]

\Storagecard\12SummitSetup\12SummitSetup.exe,-r \Storagecard\12SummitSetup\SummitSetupMYBACKUP.reg

How to preset WiFi

[NOASKREBOOT]

[EXECUTE]

\Storagecard\12SummitSetup\12SummitSetup.exe,-r \Storagecard\12SummitSetup\SummitSetupMYBACKUP.reg

[ [COPY]

[REGISTRY]

How to preset WiFi

How to Kiosk Mode Kiosk mode is provided by 12Monitor.

12Monitor is tune-able “home-screen” or “main-menu”

In which you can set “white listed” app’s.

12Monitor renders the screen accoording to the settings in

12Monitor.ini file (located in “\StorageCard\12Monitor”)

How to Kiosk Mode

[MENU]

Logo = GFX\UnitechUser.png

Number of top tabs = 2

[TOPTAB 1]

Icon = gfx\2-L.png

Icon grayed out = gfx\2-grey.png

Text = Out of the Box

Number of left tabs = 2

[LEFTTAB 1]

Text = Worker1

Number of buttons = 3

Button 1 = Asset "\StorageCard\Kalipso\KClient.exe" AssetTracking?\StorageCard\Kalipso\AssetTracking\AssetTracking.KIM,-1000

Button 2 = Warehouse "\StorageCard\Kalipso\KClient.exe" Warehouse?\StorageCard\Kalipso\Warehouse\Warehouse.KIM,-1000

Button 3 = Power Off "\StorageCard\Settings\off.exe“

How to Kiosk Mode

[ [LEFTTAB 1]

Text = Worker2

Button 1 = Calculator "\StorageCard\Settings\calculator.exe"

Button 2 = RunApp "\StorageCard\Kalipso\Kclient.exe“

How to Kiosk Mode

[TOPTAB 2]

Icon = gfx\3-L.png

Icon grayed out = gfx\3-grey.png

Text = SRD-Settings

Number of left tabs = 2

[LEFTTAB 1]

Text = Diagnose

Button 1 = WiFi Diagnose "\Windows\SCU.exe"

Button 2 = Communication "\Windows\Programs\Communication\USB ActiveSync.lnk"

Button 3 = Scanner "\StorageCard\USI\ScanCpl.exe"

Button 4 = Reboot "\StorageCard\Settings\reset.exe"

How to Kiosk Mode

"\StorageCard\Settings\reset.exe"

[LEFTTAB 2]

Text = Control

Button 1 = DateTime "\StorageCard\Settings\DateTime.lnk"

Button 2 = Battery "\StorageCard\Settings\Power.lnk"

Button 3 = Backlight "\StorageCard\Settings\DisplayBacklight.lnk"

Button 4 = SyncDateTime "\StorageCard\12SetTime\12SetTime.exe“

How to Kiosk Mode

'------------------ END OF [MENU] --------------------REMARK LINE

[PASSWORD]

Password = 650

[LAYOUT]

ShowLeftTabs = yes

ShowLogo = yes

ShowTopTabs = yes

TopBar = Hide

ShowText =

ShowTextFile =

ShowTextDeviceID = yes

ShowTextFont = Tahoma,11,#FF0000,Regular

ShowTextLocation = 0,300

'----------------- END OF INI FILE -------------------REMARK LINE

Boot options

Cold Boot – Press and hold

ESC and ENT key while

pressing power button

Warm Boot – Press and hold

ESC key while pressing power

button

Cold Boot resistant, with predefined settings Kiosk …...Kiosk Moding • Bootloader executes every...

Documents