Post on 29-Mar-2015
transcript
Company Presentation
2013
Technical Office for Designing, Calculating and Engineering of the Power Plant Facilities
DESIGNING AND ENGINEERING OF STEEL CONSTRUCTIONS
DESIGNING AND ENGINEERING OF STEEL CONSTRUCTIONS
Office: Pardubická 244, CZ 535 01 Přelouč, Czech Republic info@fest-engineering.com
+420 466 052 521
Activities Design and engineering activities in the field of steel structures feature many-years tradition in our company. The team core consists from staff with deep experience in relevant branch and with needed skills in designing and engineering of the steel structures in compliance with applicable standards.
We are able to provide our clients with elaboration of the project, from basic design through detailed project and optimizing of the structures, incl. static and dynamic calculations, to manufacturing and assembly documentation. The operation subject is mainly documentation of main load-bearing steel structures for technologic facilities, such as boilers, tanks etc., as well as piping bridges forming support structures for piping systems, auxiliary steel structures for housing of piping, various support elements and housing for pressure and no-pressure vessels, flue-gas ducting and air ducts, maintenance and operation platforms, walkways, lifting, assembly and transport equipments. Our operation range includes also designing of manufacturing and assembly halls.
DESIGNING AND ENGINEERING OF STEEL CONSTRUCTIONS
Office: Pardubická 244, CZ 535 01 Přelouč, Czech Republic info@fest-engineering.com
+420 466 052 521
Design and manufacturing documentation is created by means of 3D software To achieve high-quality level, minimizing of costs and reduction of time required for the documentation development itself, as well as for manufacturing and assembly, we use up-to-date software. Basis forms development of smart 3D model in the TEKLA software.
This model can be further used for optimizing of the structure and its static calculation, e.g. in the SCIA software. By transferring to relevant formats, the model can be further used as reference model integrated to general model of the investment unit to indicate potential collisions or relevant revisions or modifications.
With our services, the client will avoid issues during the structure manufacturing and assembly, which could occur due to incorrect or non-precise developed documentation. Additional high advantage is also saving of materials, not only due to optimizing, but also due to precise development of the project to ensure minimum waste and consequently less wearing of the manufacturing and assembly equipments and decrease of the manufacturing period.
DESIGNING AND ENGINEERING OF STEEL CONSTRUCTIONS
Office: Pardubická 244, CZ 535 01 Přelouč, Czech Republic info@fest-engineering.com
+420 466 052 521
We use following software programs to achieve optimum results in development of documentation for the steel structures and constructions:
TEKLAINVENTORRSTABNEXIS 32SCIA.ESA PT
DESIGNING AND ENGINEERING OF STEEL CONSTRUCTIONS
Office: Pardubická 244, CZ 535 01 Přelouč, Czech Republic info@fest-engineering.com
+420 466 052 521
•Development of anchoring plans •Drafts of steel structures and constructions •Detailed processing •Manufacturing documentation •Static and dynamic analyses of the steel structures •Compilation of data for NC machines
DESIGNING AND ENGINEERING OF STEEL CONSTRUCTIONS
Reference projects 2013
IKS GmbH Mannheim Steel structures for electro-distribution unit, Steel structures for flue cinder filter ŠPI a.s. Auxiliary steel structures (actual condition revision inspection) – Ledvice BKB Metal DD for steel stack – Návsí FANS, a.s. Steel structures for dry cooling – study Metrostav a.s. Steel structures for flue-gas ducting supports – Prunéřov Ekol, spol. s.r.o. Steel structures for economizers – Etihad, Iraq
Ekol, spol. s.r.o. Steel structures for service walkways around the boilers – Etihad, Iraq
Office: Pardubická 244, CZ 535 01 Přelouč, Czech Republic info@fest-engineering.com
+420 466 052 521
Bronswerk Heat Transfer s.r.o. Steam piping and steel structures – Chotíkov (incineration plant) FANS, a.s. Steel structures for cooling unit – Domoradice
DESIGNING AND ENGINEERING OF STEEL CONSTRUCTIONS
Office: Pardubická 244, CZ 535 01 Přelouč, Czech Republic info@fest-engineering.com
+420 466 052 521
Reference projects 2012
Modřany Power a.s. Revision inspection of auxiliary steel structures – Ledvice Power Plant Modřany Power a.s. Tilting platform – Mochovce NPP ZVU Potez a.s. Auxiliary steel structures for train service walkways – ORICA
Intermont Pardubice s.r.o. Absorber train service walkways - ORICA
Intermont Pardubice s.r.o. ORICA – Bleaching train service platforms FANS, a.s. DN 5800 steam piping (steel structure projects) Profitall, spol. s.r.o. Trmice – lifting and assembly fixtures for disassembly of gas-fired boiler Niersberger Instalace s.r.o. AGC Teplice – project of new oxygen duct line Metrostav, a.s. Reconstruction of the Bohemia Hotel in Chrudim (extension building steel structures)
REFERENCES (PETROCHEMICAL, METALLURGICAL AND PAPER-MAKING FACILITIES)
Office: Pardubická 244, CZ 535 01 Přelouč, Czech Republic info@fest-engineering.com
+420 466 052 521
Reference projects 2011
Modřany Power, a.s. Auxiliary steel structures for measuring instrumentation – Ledvice Power Plant Siemens AG Type-designed staircase tower (8000H) Metrostav, a.s. Overhead beams – Lego Kladno
Metrostav, a.s. Steel walkway – LEGO Kladno Siemens AG Emergency exit staircase tower Siemens AG Main staircase tower Modřany Power, a.s. Auxiliary steel structures for Ledvice boiler room (venting)
REFERENCES (PETROCHEMICAL, METALLURGICAL AND PAPER-MAKING FACILITIES)
Office: Pardubická 244, CZ 535 01 Přelouč, Czech Republic info@fest-engineering.com
+420 466 052 521
Reference projects 2010
Modřanská potrubní, a.s. Auxiliary steel structures for Ledvice boiler room (drainage + venting) Allcons, s.r.o. Steel structures of staircase pit
Metrostav, a.s. Auxiliary steel structures – Ledvice Power Plant – VD – turbine hall + auxiliary service room Modřanská Potrubní, a.s. Auxiliary steel structures – Ledvice Power Plant – turbine hall + auxiliary service room
REFERENCES (PETROCHEMICAL, METALLURGICAL AND PAPER-MAKING FACILITIES)
Office: Pardubická 244, CZ 535 01 Přelouč, Czech Republic info@fest-engineering.com
+420 466 052 521
Other reference projects
2009Modřanská Potrubní, a.s. Auxiliary steel structures – Ledvice Power Plant – turbine hall + auxiliary service room ROSA Complex Project Development Ltd. Auxiliary steel structures – Eemshafen Power Plant – turbine hall
ROSA Complex Project Development Ltd.Pomocné OK – E Westfalen – strojovna
2008ROSA Complex Project Development Ltd. Auxiliary steel structures – Emsland Power Plant – turbine hall 2007 KAM Kraftanlagen München GmbH Auxiliary steel structures – Olkiluoto NPP – turbine hall
DESIGNING AND ENGINEERING OF STEEL CONSTRUCTIONS
Office: Pardubická 244,CZ 535 01 Přelouč,Czech Republic info@fest-engineering.com
+420 466 052 521
Company headquarters Bexley Square 6 3M 6BZ Salford Manchester Great Britain
OfficePardubická 244 CZ 535 01 Přelouč Czech Republic Tel.: +420 466 052 521 Fax: +420 466 263 286 E-mail: info@fest-engineering.com
Czech Republic branch, business unit Bořivojova 878/35, Praha 3, CZ 130 00 Czech Republic