COMPANY PROFILE - Armcad Systems Sdn Bhdcompany profile •we manufacture machines •design...

transcript

ARMCON ENGINEERING SDN. BHD.

COMPANY PROFILE

•WE MANUFACTURE MACHINES

•DESIGN COMPLETE TURNKEY PLANTS

•STRUCTURAL STEEL WORKS

•FACTORY DESIGN AND SETUP

•PUMP MANUFACTURE

•STEEL FOUNDRY

•SUPPLY SPECIALISED CAST STEELS

WE PRODUCE STEEL CASTINGSTO ALL INTERNATIONAL STANDARDS

JIS ASTMASTMBS BS DINDIN

TYPICAL STANDARDS

MANUFACTURER:ARMCON ENGINEERING SDN. BHD.BATU 13, JALAN KUALA KANGSAR,KANTHAN, 31200 CHEMOR, PERAK.TEL: 605-2013901 FAX : 605-2013608

• SPARE PARTS GUARANTEED•DESIGNED IN HIGH TECH CAD/CAM COMPUTER PROGRAMS.• ALL CALCULATIONS IN COMPUTER PROGRAMS.

• ALL 304SS, NI-HARD, NI-RESIST CAST IN- PLANT.• ALL CASTINGS OF HIGH QUALITY• ALL CASTINGS HEAT TREATED TO ENSURE QUALITY

DESIGNED & MANUFACTURED IN-PLANT

CASTING

HEAT TREATMENT

CLAY PROCESSING PLANTMCB CALCIUM SILICATE PLANT

RUBBER SHEET BATCH OFF

BAG HOUSE

HEAT TREATMENT FURNACE

WE DESIGN, FABRICATE & COMMISSIONPLANTS AND MACHINERIES

CEMENT PLANT

WE DESIGN, FABRICATE FACTORIES,UNIPOLES AND STRUCTURAL STEELWORKS

100,000sq. ft. factory erected turnkey.

80ft. span unipole

CONSTRUCTOR:ARMCON ENGINEERING SDN. BHD.BATU 13, JALAN KUALA KANGSAR,KANTHAN, 31200 CHEMOR, PERAK.TEL: 605-2013901 FAX : 605-2013608

• 600KG ~ 2 TON RUBBER SHEET PER HOUR PROCESSING• CUT SHEET OR WIG-WAG PROCESSING• EASY MAINTENANCE, SERVICE BACKUP FROM MANUFACTUR ER

SUNSHINE UNION 2T BATCHOFF

TAN KOR SENG 600KG BATCHOFF

* DIESEL / GAS FIRED ANNEALING / HARDENING HEAT TREATMENT FURNACE.

* IDEAL FOR METAL BASED INDUSTRY.

* CHOICE OF INSULATION - CERAMIC FIBRE, INSULATION BRICKS.

* CHOICE OF STATIONARY OR BOGEY CAR FURNACE FLOOR.

* CUSTOM BUILT TO YOUR REQUIREMENTS.

* SPARES / SERVICE AVAILABLE.

* BUILT IN MALAYSIA. NO DOWN TIME WAITING FOR SPARES OR SERVICE.

•STRUCTURAL DURABILITY•ROBUST DESIGN•HIGH WEARING CAST STEEL CONSTUCTION•WET OR DRY GRINDING•COMPLETE PLANT CAN BE DESIGNED FROM FEED TO COLLECTION OF PRODUCT•COMPUTER DESIGNED ~ CAD DESIGN•CUSTOM BUILT TO SUIT YOUR REQUIREMENTS

•IDEAL FOR GRINDING GRANITE, LIMESTONE,LUMPY MATERIAL•BALLS OR ROD CAN BE USED FOR GRINDING MEDIA

DESIGNED & MANUFACTURED IN-PLANT

SIKA VIETNAM SAND PROCESSING PLANT

MASTER PLASTER MALAYSIA PLANT

• WE DESIGN, FABRICATE AND ERECT BULK MATERIAL PROCESSING PLANTS.• CUSTOM BUILT TO YOUR REQUIREMENTS.• ALL PARTS MADE IN-PLANT ENSURING SPARE PARTS AVAILABILITY.

SAND PROCESSING PLANT INSTALLED :

• SIKA VIETNAM

• SIKA CHINA

• SIKA INDONESIA

• ALUNAN MURNI - MALAYSIA

• MASTER PLASTER (M) - MALAYSIA

• KIM YUAN AMANG SDN BHD

•WE UNDERTAKE TO DESIGN AND SET UP COMPLETE QUARRY PLANTS•COMPLETE CAD/CAM DESIGN

PICTURES - KEHN ZHEN MARBLE SDN. BHD.

• WE DESIGN AND CONSTRUCT COMPLETE CLAY PROCESSING PLANTS• PROCESSING PLANTS INCLUDE SLURRYING, FILTER PRESSING, DRYING, MILLING, BLENDING AND PACKING

5R ROLLER MILL

•CENTRAL ECCENTRIC SHAFT VIBRATION, BALANCED FOR UNI DIRECTIONAL VIBRATION ONLY.•TOUGH AND ROBUST DESIGN.•SCREEN SIZES TO YOUR REQUIREMENTS AND SPECIFICATION S•WASHING SYSTEM CAN BE INCORPORATED.•COMPUTER AIDED DESIGN USING STATE OF THE ART SOLID MODELING.

MODELS RANGE FROM 4FTx8FT. TO 8FTx20FT.SCREENING DECKS FROM 2 TO 6 DECKS.

QUARRY SCREENS -6’-0”x20’-0” WASHING SCREEN

• CONSTRUCTIONArmcon mill crushes the material using a set of balanced hammers or chippers depending on the material to be crushed. All hammers/chippers are cast high wearing steels from our own foundry. Crushed material drops out of the bottom through a netting or grill depending on the required size.

• FEATURES• SPLIT OPEN CASING FOR EASY MAINTENANCE.• ROBUST CASING AND LININGS CAST IN-PLANT.• SPARE PARTS AVAILABILTY AS ALL PARTS ARE MADE IN PLANT.• COMPUTER AIDED DESIGN FOR TRUE ACCURACY.• CUSTOM BUILT TO YOUR REQUIREMENTS.

• APPLICATIONS•IDEAL FOR CRUSHING/ RECYCLING PLASTIC WASTES. CRUSHING OF LIMESTONE, BONE MATERIAL, SYNTHETIC RESINS AFTER EXTRUSION, LUMPY AND EVEN WET MATERIALS.

• CONTINOUS PRODUCTION.• SLATE BELT OR WIREMESH BELTING• INFRA THERMAL HEATERS• VARIABLE HEAT ZONES • VARIABLE SPEED DRIVES• COOLING ZONE TO NORMALISE PRODUCTS AT OUTLET• SIGHT GLASS FOR OBSERVATION

IDEAL FOR CONTINOUS FLOW PRODUCTION PROCESS HEAT TREATMENT IDEAL FOR :

ELECTRODES PRODUCTION AND DRYINGLACQUE IMPREGNATED PRODUCT DRYINGFOOD DRYING AND STERILISINGSTRESS RELIEVING OF METALIC PRODUCTS

MANUFACTURER:ARMCON ENGINEERING SDN. BHD.BATU 13, JALAN KUALA KANGSAR,KANTHAN, 31200 CHEMOR,PERAK.TEL: 605-2013901 FAX : 605-2013608

ARMCON PROGRESSIVE SHREDDER MILL (PATENTED)

SPECIFICATIONS:

FEED MATERAIL : OPF, EFBFEED RATE MAX. : up to 12mton / Hr.OUTPUT CONFIGURATION : CUT STRANDS < 150mm @80%CUTTING SPEED (rpm) : 650rpm Min. ~ 850max.HP REQUIRED (RATED) : 150 HPINLET OPENING : 1000x600mmOUTLET OPENING : 1200x750mmCONTROL SYSTEM : CT COIL AMPERE CONTROL(optional)

150HP SOFT STARTER (optional)CONSTRUCTION:MILLSHELL : CAST STEEL SHELL 30mm THKPULLEY cum FLYWHEEL : 300kg TWIN BALANCED ROLLS.MOTOR FRAME : INDEPENDENTHOPPER CASING : OPTIONALMILL SHAFT : 200mm∅ CARBON STEEL SHAFT

HIGHLIGHTS:

• PROGRESSIVE CUTTING BY HELICAL CUTTERS ENSURES CLEAN SHEARWITH LOWER ENERGY REQUIREMENTS.

• TEAR CUTTER HOLDERS FORM A FLAT SURFACE WITHOUT OPENINGS FORFIBRES TO ENTANGLE SHAFT AND CAUSE MACHINE LOCKUP ANDJAMMING.

• REPLACEMENT BLADES ARE VERY ECONOMICAL.• BLADES NEED NOT BE SHARP AND HORNED. THE CUTTERS ACTS ONLY TO

LEAD FIBRES THROUGH GAP TO TEAR FIBRE STRANDS. THIS ACTION CANONLY BE ACHIEVED BY THE HELICAL PROGRESSIVE CUTTERS.

• CAST SHELL ENSURES ROBUST AND VIBRATION FREE OPERATIONS.• TWIN PULLEY/FLYWHEEL PROVIDES INERTIA FOR SMOOTH CONTINOUS

CUTTING. MOTOR POSITION CAN BE ARRANGED ON ANY SIDE OF THE MILL.COMPLETE FLEXIBILITY IN INSTALLATIONS.

• AMPERE CONTROL FEEDBACK SLOWS OR STOPS FEED BELT (SCREW) FORCONTINOUS SMOOTH FEEDING AND CUTTING (optional).

OPF SHREDDING

EFB SHREDDING

COMPANY PROFILE - Armcad Systems Sdn Bhdcompany profile •we manufacture machines •design...

Documents