Post on 17-Feb-2019
transcript
Company Profile
DEALING IN ALL TYPES OF CIVIL & MECHANICAL WORKS
HEAD OFFICE : G14, GROUND FLOOR, PLATINUM SENTRAL, JALAN STESEN SENTRAL 2, KL SENTRAL, 50470 KUALA LUMPUR, MALAYSIA.
+603-2718 4382 +603-2718 4381 Email: info@solarisinfiniti.com
OPERATION OFFICE : LOT D5, KAWASAN PERINDUSTRIAN MIEL, TELUK KALONG, KEMAMAN, CUKAI, 24007 TERENGGANU, MALAYSIA.
+609-863 1601 +603-2718 4381
O v e r v i e w
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
➢ SOLARIS INFINITI SDN BHD (Co.Reg.No.:1005936-M) (“SOLARIS”) is a 100% Malaysian Bumiputra
owned company, which was incorporated in 13th June 2012 as a private limited company
under the Companies Act 1965, specifically to meet the growing demands for local service
providers to support the Oil and Gas industries in Malaysia both downstream and upstream.
➢ On 19th July 2017, SOLARIS is accredited with ISO 9001:2015 “Quality Management System” and
ISO 14001:2015 “Environmental Management System” registered for the scope of activities
Provision of Fiber Reinforced Plastic (FRP), Thermoplastic, Non-Metallic & Metallic Lining Services.
SOLARIS is licensed by PETRONAS, Ministry of Finance (MOF) and CIDB (Grade G7).
➢ Our scope of services is focusing in servicing petrochemical and power plants both in
fabrication works and maintenance services. The specialization services areas include piping
non-metallic inclusive rubber lining and tank farms fabrication.
➢ Concurrently, SOLARIS outset in supplying offshore technical personnel for Geotechnical and
Geophysical pipeline investigations and the requirements for a drilling program. In addition, all
marine activities are subject to international and national regulations as well as industry
operating standards. Therefore, the team will ensure consistency and improvement of SOLARIS in
providing competent personnel, adequate resources, equipment, work methodology and safe
environment to carry out stakeholders’ and Clients’ needs to achieve the highest quality
standard in the industry.
➢ Turning to exclusive appointments as dealer and agent, SOLARIS has several exclusive
partnership with local and international companies. To name few, our exclusive partner from
Korea has technology in wastewater treatment using a unique SNOWFLAKE system. GUASCOR is
a leading supplier of diesel and gas engines providing customized energy solutions across
worldwide energy infrastructure markets based upon reciprocating engine power systems
technologies. As partner, we offer a Biogas solution, a solid waste filled with green technology
solutions and its engineering using fluid fuel (diesel, bio-diesel) with robust design, reliable
operation and low operating costs and, Master Tec Wire & Cable Sdn Bhd is a premier
manufacturer supplying Low Voltage Power Cable, Control Cable, Instrumentation Cable, Fire
Resistance Cable for commercial and industrial buildings.
➢ Our work methodology comprises of technical expertise and a practical, hand-on approach.
We value the importance of our relationships with our customers, employees, vendors and our
partners.
M i s s i o n
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
V i s i o n
➢ Through our commitment in quality and constant innovation we strive to be a contractorof choice by delivering excellent integrated services to our clients and partners.
➢ To continuously deliver high quality services and products that meet client expectations
➢ To ensure products and services delivered are in safe and cost effective manner
➢ To provide solutions for customer in innovative manner
➢ To continuously enhance the effectiveness of business process and system
➢ To ensure optimum return to all Stakeholders
C o r e V a l u e s
➢ We believe in treating our clients with respect and faith. We grow through creativity,invention and innovation. We integrate honesty , integrity and business ethics into allaspects of our business functioning.
O u r G o a l s
➢ Regional expansion in the business and develop a strong base of key customers.Increase the assets and investments of the company to support the development ofservices. To build good reputation in the business and become a key player in theindustry.
O u r Q u a l i t y
➢ ISO 9001:2015 Provision of Fiber Reinforced Plastic (FRP), Thermoplastic,
Non-Metallic & Metallic Lining Services
➢ ISO 14001:2015 Provision of Fiber Reinforced Plastic (FRP), Thermoplastic,
Non-Metallic & Metallic Lining Services
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
EC
GMD
Corporates & QHSE
HR
Admin
Legal
QHSE
Operation
Head Of Subsea
Head Of Geosciences
Head Of Subsurface
Head Of Engineering Consultancy
Head Of Special Project
Technical
Engineering
Consultancy
Research & Development
Finance
Accounts
Treasury
Credit
Cost Controller
Purchasing & Sourcing
Purchasing
Sourcing
Logistic
Asset Management
Business Development
Tender & Commercial
Costing & Contract
Project Planning
Strategic Analyst
Director Office
C o m p a n y S t r u c t u r e
Company SOLARIS INFINITI SDN BHD
Registration No 1005936-M
Date of Incorporation 13th June 2012
Office Address G14 Ground Floor, Platinum SentralJalan Stesen Sentral 2, KL Sentral50470 Kuala Lumpur, Malaysia
Operation Address Lot D5, Kawasan Perindustrian MIELTeluk Kalung, Kemaman Cukai24007 Terengganu, Malaysia
Contact 603-2718 4382 603-2718 4381
Email info@solarisinfiniti.com
Website www.solarisinfiniti.com
Authorised Capital RM1,000,000.00
Paid-up Capital RM750,000.00
Banker/Branch CIMB Islamic Bank Berhad(KLCC Branch, Kuala Lumpur)
Alliance Bank Malaysia Berhad(Ampang Point Branch, Kuala Lumpur)
License, Registration & Certification ISO 9001:2015 & ISO 14001:2015Validity : 19.07.2017 – 18.07.2020
PETRONASLicense No :1005936-MValidity :18.04.2017 - 17.04.2020
CIDB Registration No : 0120161019-WP180505Grade : G7Validity : 26.09.2017 – 17.10.2018
Ministry of Finance
Certificate No : K22152883711321342Validity : 10.06.2017 – 09.06.2020
Malaysia Goods & Services Tax (GST)ID Registration No : 000611295232
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
C o m p a n y I n f o r m a t i o n
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
L i c e n s e s & C e r t i f i c a t i o n
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
L i c e n s e s & C e r t i f i c a t i o n
CATEGORIES OF LICENSES
1. PE1030100 ELECTRICAL-CABLES-POWER & CONTROL
2. PI1220100 INSTRUMENT-CABLES-INSTRUMENT
3. PI1220300 INSTRUMENT-CABLES-TELECOMMUNICATION
4. SA1030100 AIR TRANSPORTATION SERVICES-AERIAL SURVEILLANCE-MANNED & UNMANNED
5. SC2010400 CIVIL MAINT SERVICES-OFFSHORE SOIL INVESTIGATION
6. SC3070000 CONSULTANCY SERVICES-COMPUTERIZED INSPECTION & MAINTENANCE CONSULTANCY
SERVICES
7. SG1040000 GEOLOGICAL SERVICES-GEOLOGICAL FIELDWORK
8. SG3010200 GEOMATICS SERVICES-GENERAL SURVEY-HYDROGRAPHIC SURVEY
9. SG3010300 GEOMATICS SERVICES-GENERAL SURVEY-TOPOGRAPHICAL & ENGINEERING SURVEY
10. SI1020100 ICT SERVICES-HARDWARE SUPPORT SERVICES
11. SM2010100 MANPOWER SUPPLY-LABOUR SUPPLY
12. SM2030100 MANPOWER SUPPLY-HSE SPECIALIST
13. SM3011900 MARINE TRANSPORTATION SERVICES-MARINE VESSELS-BUNKERING SERVICES
14. SM5090200 MECHANICAL ENGINEERING MAINTENANCE-NON-METALLIC - PVC, FIBERGLASS
(E.G.GRE,GRP, ETC) PVC,HDPE, ETC
15. SO2020500 OFFSHORE FACILITIES CONSTRUCTION - ONSHORE FABRICATION - ONSHORE FABRICATION -
SURFACE PREPARATION AND PAINTING
16. SU1050000 UNDERWATER SERVICES-UNDERWATER INSPECTION/DIVING SERVICES
17. SW1030000 WAREHOUSING & STORAGES SERVICES-WAREHOUSE MANAGEMENT SERVICES
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
L i c e n s e s & C e r t i f i c a t i o n
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
O u r S e r v i c e s
Fabrication Geosciences Subsea
1. Metallic And Non-metallic
Lining Services (GRE, GRP,
FRP, HDPE, Thermoplastic
Etc.)
2. Vacuum Blasting &
Painting
3. Plant Maintenance
(Rejuvenation, Shutdown,
Reactor Cleaning)
4. Valve Dealer (Butterfly,
Casting, Control Ball
Valves Etc.)
5. Rubber Lining
1. Geophysical – Earth
Formation
2. Geotechnical – Soil
Properties, Strength
3. Geohazards – Risky Natural
Geological State
4. Geomechanics – Soil &
Rock Behavior
5. Geochemical –
Hydrocarbon Present In
Deep-water
6. Laboratory Testing &
Analysis
7. Engineering Reporting
1. Offshore Installation &
Underwater Constructions
2. Underwater Inspection And
Repair
3. Drilling Operations
4. Marine Support Services
5. Marine Salvage Services
6. Operators Of Underwater
Vehicles
7. Hyperbaric/Habitat Welding
8. Submarine Cable
Installations
9. Decommissioning
TECHNOLOGY CABLE SOLUTION FACILITIES
1. Wastewater System
2. Biogas Technology
3. Engineering & Design
4. 3D Modeling & Printing
5. Asset Integrity
6. Open Architecture Data
Management
1. Power Cable (Low Voltage
& Medium Voltage)
2. Instrumentation & Control
Cable
3. Halogen Free Cable (Green
Cable)
4. Fire Rated Cable
5. Signal Cable
6. Marine & Offshore Cable
7. Housing Cable
8. Telecommunication Cable
9. Submarine Cables
10. Others Special Cable
1. Ocean Freight/Air Freight
Forwarding
2. Sea/Air/Inland
Transportation
3. Packing/Removal
4. Bonded/Non-Bonded
Secure Yard
5. Open/ Covered Secure
Yard
➢ Fabrication Yard
➢ Warehousing & Logistics
➢ Project Management
➢ Manpower Supply
➢ Non-metallic lining services (FRP, GRE, GRP, HDPE,
Piping System, Exhaust System, Ducting Works,
Scrubber, Tanks and etc.)
➢ Metallic Fabrication (Stainless Steel, Steel lining)
➢ Lines Pipes and Fittings PFA, PVDF and PTFE
➢ Chemical Resistant Lining (FRP, Epoxy, Rubber and HDPE)
➢ Rubber Lining
➢ Chemical Resistant Bricks Lining
O u r P r o d u c t s
FRP PVC PVDF HDPE GRE/GRP
CPVC ECTFE PPTHERMOPLASTIC
VALVES
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
S e r v i c e s a t K e m a m a n D i v i s i o n
CHEMICAL RESISTANT BRICKS LINING
USER SUITABILITY SUPPORT
• Chemical plants
• Fertilizer Plants
• Thermal power plants for
chimney construction
• Petrochemicals and refineries
• Pharmaceuticals
• Galvanizing Plants
• Resist most of acids, alkalies,
solvents, salts, greases, at
different concentration &
temperature
• Best for heavy duty industrial
flooring and brick/ tile inter-liner
material
• Effective laying system for floors/
elevated floors of chemical
storage tank-pads in refinery, Oil
& Gas base projects
• Used as bedding & jointing or as
jointing/pointing mortar in acid
proof bricks / tile / stone lining &
flooring work
• Protect structures against
atmospheric corrosion and
effects created by acid fumes
and dry wet gases
• Used as coating, screeding,
grouting and jointing material
• Used for bonding old to new
concrete
F i b r e g l a s s R e i n f o r c e d P l a s t i c s ( F R P )
➢ A composite material made of a polymer matrix reinforced with fibres. The fibres areusually glass, carbon, aramid, or basalt. Rarely, other fibres such as paper or wood orasbestos have been used. The polymeris usually an epoxy, vinylester or polyesterthermosetting plastic and phenol formaldehyde resins.
➢ It is a strong lightweight material, it is less brittle, and its raw materials are much cheaper. Itsbulk strength and weight are also better than many metals, and it can be more readilymolded into complex shapes. Easy fitting installation at site will also reduces labor costs andfabrication time at sites.
G l a s s R e i n f o r c e d E p o x y ( G R E )
➢ The pipeline systems are made from glass fibers, which are impregnated with an aromatic-or cyclo-aliphatic amine cured epoxy resin. This thermoset resin system offers superiorcorrosion resistance together with excellent mechanical, physical and thermal properties.The glass fiber reinforced epoxy pipeline is resistant to the corrosive effects of mixtures witha low concentration of acids, neutral or nearly neutral salts, solvents and causticsubstances, both under internal and external pressure.
➢ Suitable and of much use in power plant piping, down hole tubing and casing, plantprocess piping, oil and gas flow lines, potable water distribution schemes, offshore platformapplications and lot more.
G l a s s R e i n f o r c e d P l a s t i c s ( G R P )
➢ Used for its high mechanical strength, light weight, corrosion and temperature resistantproperties, thermal insulation, smooth internal surface, easy to form complex shapes, easeof repair and its cost effectiveness. Basically, GRP consists of thermosetting resins and glassfibre.
➢ Making a thermosetting product involves a chemical reaction in which molecules areformed and warmth is released. Once the new network of molecules exists, it creates itsfinal shape. This network of molecules ensures fire resistance when the material is heated.Thermosetting materials are polyester, epoxy and polyurethane resins.
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
M e t a l l i c & N o n M e t a l l i c L i n i n g S e r v i c e s
GRP GRE FRP
• Excellent UV/ Weathering
Resistant
• Excellent Corrosion Resistant
• Excellent Strength and
• Light Weight
• Excellent Stiffness
• Low Thermal Conductivity
• and Expansion
• Anti Slip Finishing
• Non Conductive
• Fire Retardant
• Long Life Span
• Outstanding Appearance
• Smooth internal surface
• Cost Effective
• Light weight and Durable
• Easy to Install
• Corrosion Resistance
• High Chemical Resistance
• Low Thermal Expansion
Coefficient
• Non Conductive
• No shrinkage during molding
• Low density
• Good ratio strength / stiffness
• Strong ageing and fatigue
performance
• Excellent Temperature
Resistance
• High thermal insulation
• Abrasion and shockproof
• Excellent UV/ Weathering
Resistant
• Excellent Corrosion Resistant
• Excellent Strength and
• Light Weight
• Low Thermal Conductivity
and Expansion
• Anti Slip Finishing
• Non Conductive
• Fire Retardant
• Long Life Span
• Outstanding Appearance
• Cost Effective
➢ Can be used either new applications or replacing existing applications which isexposed to corrosive environment. It is proven can be used for most aggressiveenvironment in different industries such as:
TRANSPORT REFINERY SHIPYARD OIL & GAS MARINE OFFSHORE MINING
GENERAL INDUSTRIES
PULP & PAPER
CHEMICAL PLANT
AIR POLLUTION CONTROL
WATER & WASTE
TREATMENT
COOLING TOWER
PUBLIC AMENITIES
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
P r o d u c t s A p p l i c a t i o n
➢ Oil & Gas , Power Plant and Refinery
▪ Suitable for the most aggressive environment such as offshore, power plant andrefinery application.
➢ Chemical Plant, Water & Waste Treatment
▪ Can be used as maintenance platform, trench cover etc. in chemical plant,water industry and sewerage treatment plant.
➢ Public Amenities & Transportation
▪ Applicable in transport and public amenities sector, such as railways – LRTstation, Harbor, Jetty, etc.
➢ General Industries and Others
▪ Suitable for replacing the old rusted metal gratings and also commonly use forreplacing metal grating due to vandalism problem.
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
A p p l i c a t i o n
VINYLESTER - CHEMICAL RESISTANT
•Specifically engineered to provide premium chemical resistance in highly corrosiveenvironments. It utilizes an advanced resin system which delivers outstanding resistance to awide range of harsh corrosive environments ranging from acidic to caustic, plus a high degreeof solvent resistance.
ISOPHATALIC – GENERAL APPLICATION
•Designed to meet corrosive conditions for sewerage, construction, offshore and most of theindustrial applications. It Is excellent for weathering resistance and moderate resistance tocaustic & solvent environments.
ISO | VE FR – FIRE RETARDANT
•GFR has all the characteristics of ISO or VE, and offers superior fire retardant. It is low smokeand halogen free during combustion and designed for application where fire retardancy isrequired.
PHENOLIC– FIRE RESISTANT
•Has superior fire and high temperature resistance properties. After the Phenolic resin fullycured, the high strength of the chemical bonds formed gives grating an exceptional level offire performance and resistance to ignition & high temperatures.
➢ Resin formulation used in pultrusion process determines the performance of the gratingin terms of corrosion resistance, UV resistance, chemical resistance and fire retardantcharacteristics. Different applications require different performance, thus, wedeveloped 4 types of resin formulation to suit client’s application. The formulations areas follows:
M a t e r i a l s
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
M e t a l l i c F a b r i c a t i o n
➢ Focusing only on vacuum, blasting and painting. Our services are the sought after solutionfor an efficient, environmentally friendly and dust free blasting environment. Its lowmanpower requirement and superior productivity plus high quality surface makes it adefinite and must-have system where blasting is required.
➢ All our systems are certified safe to be used in Oil & Gas Environment , both upstream anddownstream. They come with ATEX certification and are endorsed globally to be safe andoffshore worthy.
V a c u u m B l a s t i n g & P a i n t i n g
1. BLASTRAC 350VH
• Automated vertical blasting unit, ideal for tank shell and shipside
• Eliminates the use of scaffolding and other lifting methods
• 100% dust-free system with green technology
• Produces consistent surface quality and can achieve up to SA3 surface standard
2. PINOVO (Pi)
• Hand-held vacuum system for hard to reach areas. Ideal for pipe external blasting
• 100% dust-free system with reduced reliance on manpower
• Compatible for all kinds of surface geometry with easy to change brush-heads ornozzles
• Achieves up to SA3 surface standard
3. SCHMIDT (BRS)
• Hand-held vacuum blasting system, ideal for structure and spot-blasting
• 100% dust-free system with internal grit recycling system
• Achieves up to SA3 surface standard
• Reduces Manpower Reliance
➢ Shot Blasting is a cost effective and environmentally friendly method for preparing concrete,
steel and asphalt surfaces. Shot blasting is a method used on steel or concrete surfaces,
which prepares the surface for the application of a coating, paint or sealer and resurfacing
or removing contaminants. In order for a new coating or overlay to bond effectively, the
surface must be clean, dry and profiled.
➢ This labor and time-saving process strips, cleans and profiles simultaneously. Shot blasting
leaves the surface immediately ready for the application of coatings or overlays,
eliminating drying time and costly disposal procedures associated with other surface
preparation methods. Shot blasting produces high bonding character compared to
conventional methods.
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
V a c u u m B l a s t i n g & P a i n t i n g
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
V a c u u m B l a s t i n g & P a i n t i n g
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
Very efficient, all-in-one and environmental friendly technique
Economical & ecological solution (no water/moisture, no chemicals, no dust)
Perfectly clean (confine process, no waste disposal)
Safe (no risk of surface deceleration, no damage, on built-in or near-end mechanical &electrical devices)
Very fast evacuation from the work-field if required
Higher productivity level in terms of achieving sq. meter/ hour, adjustable to meet the desiredresults
Bare minimum assemblies and easy to mobilize
Shot blasting is the preferred method of surface preparation for several reasons;
✓ Shot blasting is a one stop method that will strip, clean and profile a surface while leaving it
dry and ready for the application of coating or overlays
✓ Shot blast machines have self-contained dust collectors which ensures dust free operations
✓ There is no need for use of minerals or chemicals which may be potentially hazardous.
Shot blasting does not impregnate particulate into the surface being blasted. Other advantages
to using our system for steel surface preparation over other methods are:
✓ Achieves high productivity rates: up to 6 times greater
✓ Requires less manpower and minimizes operator fatigue
✓ Recycles abrasive–leads to potential cost savings
✓ Simplified handling and disposal of wastes
✓ Environmentally friendly, no need for containment
✓ Allows other trades to work simultaneously
✓ No costly pumps to purchase or maintain
✓ No flash rusting–shot blasted surface is clean and dry
V A L V E R U B B E R L I N I N G - R E P A I R
➢ Solaris Infiniti Sdn Bhd (SISB) is capable to provide offsite (Base on our factory in
Kulai) and onsite repair work for rubber lining for industrial application in
Malaysia. With no of rubber lining material from Japan and strong technical
support with full inspection report, we can ensure reliable quality and meeting
stringent customer requirement.
➢ Off site services – On our rubber factory in Kulai, Johor Malaysia:
1. Service limit to valve diameter from 10” – 76” (Hot cure)
2. Cool cure (no limit)
➢ On site – Client location
1. No limit for Hot cure & cool cure rubber material.
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
R u b b e r L i n i n g
R U B B E R L I N I N G F O R P U M P
R e p a i r P u m p C a s i n g a n d I m p e l l e r S e r v i c e s
➢ Solaris Infiniti Sdn Bhd (SISB) is capable to provide RKI – Riken Keiki Japan Gas
Detector/Tester for industrial application in Malaysia. RKI Gas detector products
range include fix installation alarm system and portable unit.
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
R u b b e r L i n i n g
➢ We provide rubber lining
services complete with
material (from OHJI rubber
Japan), manpower and
operation tools. Our
manufacturing facility is in
Kulai, Johor Malaysia.
➢ Rubber Line Products and
services:
1. Anti corrosion such as
rubber lining, Polyurethane
,FRP, Chemicrete SV 2 ply
(Flake Lining), PTFE coating
or etc.
2. Supplying of Industrial part
or various rubber such as
rubber hoses, Expansion
joints, rubber gaskets, Seal
packing's, Plastic valves,
Swing check valves.
3. Our services in
Anticorrosion field such
Inspection services, repair
services, maintenance
service and new lining
services.
4. Our expertise is from
Singapore and Japan with
various experiences in
rubber lining project in
Asian region in technically
or materials.
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
N E W & R E P A I R S E R V I C E S F O R I N D U S T R Y
R u b b e r L i n i n g
➢ SISB capable to provide roller lining locally for industrial application in Malaysia.
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
N E W & R E P A I R S E R V I C E S F O R I N D U S T R Y
R u b b e r L i n i n g
➢ Valve has been designed for use with various combinations of materials such as
Carbon Steel, Low Carbon Steel, Special Alloy, Stainless Steel, Monel and Inconel.
➢ Special consideration was devoted to the attainment of enhance life and operation ofour valve throughout design , development, testing and manufacturing stages.
➢ Valve designs combined with the selection of advanced material are such that longperiod of inactivity should not affect the operations of efficiency.
Floating Ball Valves
Ball Valves
Butterfly Valves –Full Lug Type
Butterfly Valves –Wafer Type
Butterfly Valves –Flange Type
Ball Valves 2 PC Trunnion Ball Valve
Floating Ball Valves -Bolted 2 PC
Thermoplastic Valves
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
V a l v e s
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
G e o s c i e n c e s - G e o m e c h a n i c s
• Lab testing• Fault analysis• Subsidence and reservoir
compaction• Borehole Well Stability• 3D Geomechanics Modeling
(finite element)
• Deepwater Geophysical & Sampling• Geothermal Heat Flow Analysis• Microbial Prospecting for Oil & Gas• Lab testing & Analysis
• Engineering Analysis
G e o s c i e n c e s - G e o c h e m i c a l
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
• Focus Area of Services
• DP2 Mobile Well test &
Stimulation
• Subsea Seismic system
• FDP & FRR
G e o s c i e n c e s - S u b s u r f a c e
Subsurface Optimization Value Chain
GEOPHYSICSSEISMIC INTER-
PRETATION
ATTRIBUTE ANALYSIS
PETROPHYSICS PROPERTY TREND ANALYSIS
GEOLOGY FACIESPETRO-
PHYSICS
RESERVOIR ENGINEERING
DYNAMIC DATA
PVT REAL PERM
MATERIAL BALANCE
WELL BY WELL
DA
TA
AC
QU
IS
AT
IO
N
HIS
TO
RY
MA
TC
HProduction Forecasting
Multiple Realization
Sensitivities
Uncertainty
Economics
Optimizations
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
W a s t e w a t e r S o l u t i o n s
G r e e n T e c h n o l o g y
➢ The Company has extensive experience in providing Wastewater Treatment Solution forenvironment. Technical staffs and researchers do their best to provide and improve oursolution for client.
B i o g a s
➢ The pipeline systems are made from glass fibers, which are impregnated with anaromatic- or cyclo-aliphatic amine cured epoxy resin. This thermoset resin system offerssuperior corrosion resistance together with excellent mechanical, physical and thermalproperties. The glass fiber reinforced epoxy pipeline is resistant to the corrosive effectsof mixtures with a low concentration of acids, neutral or nearly neutral salts, solventsand caustic substances, both under internal and external pressure.
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
P r o d u c t s D e s c r i p t i o n
➢ Biogas is made in a biogas digester. We call it a digester because it is a large tank filled withbacteria that eats (or digests) organic waste and gives a flammable gas, called biogas. Thebacteria in the Gesi550 biogas digester need to be cared for like you would care for ananimal. If the bacteria have too much or too little food they get sick. You must feed thebacteria every day with a mixture of food waste and water. In addition to biogas, the Gesisystems make wastewater that is rich in nutrients. This water may be poured over your plantsto help them grow.
➢ Biogas systems make use of a relatively simple, well-known, and mature technology. Themain part of a biogas system is a large tank, or digester. Inside this tank, bacteria convertorganic waste into methane gas through the process of anaerobic digestion. Each day, theoperator of a biogas system feeds the the digester with household by-products such asmarket waste, kitchen waste, and manure from livestock. The methane gas produced insidebiogas system may be used for cooking, lighting, and other energy needs. Waste that hasbeen fully digested exits the biogas system in the form of organic fertiliser.
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
B i o g a s S o l u t i o n s
➢ Power Cable (Low Voltage & Medium Voltage)
➢ Instrumentation & Control Cable
➢ Halogen Free Cable (Green Cable)
➢ Fire Rated Cable
➢ Signal Cable
➢ Marine & Offshore Cable
➢ Housing Cable
➢ Telecomunication Cable
➢ Submarine Cables
➢ Others Special Cable
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
C a b l e s S o l u t i o n s
➢ Bonded Secure Yard
➢ Non-Bonded Secure Yard
➢ Open & Covered Secure Yard
➢ Packing/Removal
➢ Inventory Management
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
F a c i l i t i e s
➢ ZHONG SHI CHEMICAL ENGINEERING CONSTRUCTION COMPANY LTD appointed SOLARIS INFINITI
SDN BHD as its exclusive agent for tank hydraulic jacking system including consulting and
service.
➢ Common tank dome standard series are: 100 cubic meters, 200 cubic meters, 300 cubic meters,
500 cubic meters, 700 cubic meters, 1,000 cubic meters, 2,000 cubic meters, 3,000 cubic meters,
5,000 cubic meters, 10,000 cubic meters, 20,000 cubic meters, 30,000 cubic meters, 50,000 cubic
meters, and100,000 cubic meters.
BackgroundWith the development of the oil industry, manylarge tanks after a long run, bottom severecorrosion, even many corrosion perforation,weld cracks appear delaminating, large tankmaintenance has become an important issue.
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
T a n k H y d r a u l i c J a c k i n g S y s t e m
E x c l u s i v e P a r t n e r
MASTERTEC WIRE & CABLE SDN. BHD.
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK
DONGSAN VALVE CO.LTD.SWALLOW SUN CO. LTD.
SHENGLI OIL FIELD XINDA GUANYE SCIENCE AND TECHNOLOGY
DEVELOPMENT CO. LTD.
ZHONG SHI CHEMICAL ENGINEERING CONSTRUCTION COMPANY LTD.
ROBUST ENERGY SDN. BHD.
A p p r o v e d V e n d o r s
www.solarisinfiniti.com | info@solarisinfiniti.com | +603-2718 4382 | +603-2718 4381 | 20180517SK