Post on 21-Apr-2017
transcript
STEP 1 : PREPARE YOUR WATCH FOR PAIRING
To pair your COOKOO watch with your device, first ensure that the pairing
function is activated.
Acknowledge
notification
POWER
BUTTON
Press the POWER Button for
6 seconds until you hear 2
beeps followed by the blinking
of all icons.
All icons should be blinking
every 2 seconds.
Backlight
COMMAND
BUTTON
STEP 2 : PREPARE YOUR DEVICE BY ENABLING BLUETOOTH
Next, ensure that your ‘Bluetooth’ function in your device is switched on.
X
Bluetooth is OFF
Bluetooth is ON
Next, proceed to download your Free
App on the Google Play store. For testing purposes, use the COOKOO Life BETA 8 App.
Tap the Play Store icon on your device. Then, search for ‘COOKOO Life’.
Install & accept the COOKOO Life BETA 8 App. Note : The screen cap
image to your right is the
correct App to download
(COOKOO Life – BETA 8 by
CONNECTEDEVICE)
STEP 3 : INSTALL THE COOKOO LIFE BETA 8 APP ONTO YOUR DEVICE
By this stage, please ensure the following :
1. Your watch is ready to pair
2. Your Bluetooth function on your device is switched on
3. You have the COOKOO Life BETA 8 App installed onto your device
After completing steps 1-3, you’re now ready to pair your watch with your
device!
1 : HOW TO REGISTER FOR YOUR ACCOUNT WITH CONNECTEDEVICE
Tap ‘New User’ to begin the Registration process
Fill in all field.
Finally, tap ‘Sign-up!’
STEP 5 : GO THROUGH CONNECTEDEVICE ACCOUNT REGISTRATION
Register or Log into your
CONNECTEDEVICE Account
(! Note : New users please check your email for sign up
confirmation)
Acknowledge the prompts by
tapping ‘OK’
STEP 6 : ENABLE COOKOO LIFE BETA 8 APP NOTIFICATIONS
Tap ‘OK’ to proceed
Tap on the check box to enable the notification access
STEP 6 : ENABLE COOKOO LIFE BETA 8 APP NOTIFICATIONS (continued from previous slide)
Tap ‘OK’ to complete the
enabling process.
The green tick in the checkbox confirms that you have successfully enabled
notifications.
You may now proceed to pairing the watch.
STEP 7: GO TO YOUR IN-APP DEVICE RADAR TO SELECT THE WATCH TO PAIR
To pair the watch :
First, tap ‘Devices’ to
locate your watch
Second, select the watch to pair
Finally,
tap ‘Connect’ to confirm
the pairing
STEP 7: GO TO YOUR IN-APP DEVICE RADAR TO SELECT THE WATCH TO PAIR (Continued from previous slide)
You will see
‘Attempting
connection’ during
the pairing process
YOU’RE
CONNECTED!
The Blue highlighted icon
confirms your successful
pairing.
You may now use your
watch to receive
notifications.
2 : HOW TO SET YOUR DEVICE AND WATCH NOTIFICATIONS
Launch your COOKOO Life app and tap settings, in the
above right hand corner.
The color BLUE knobs
indicates the notifications
you will receive onto
your watch.
If you wish turn off certain
notifications, swipe the
knob to your left.
3 : HOW TO CONDUCT A DEMO OF YOUR WATCH
In your COOKOO Life home
screen, tap the
icon on the bottom left
Then, tap ‘Device Demo’
in your menu
Lights up for
incoming &
missed calls
Tap these icons to
demo :
3 : HOW TO CONDUCT A DEMO OF YOUR WATCH (continued)
Tap on the above icons to trigger
notifications to your watch.
Your selected demo feature in the
App will turn Orange.
An icon will then light up on your
watch face when you tap on each
demo function.
Lights up for battery alerts,
Tap these icons to demo :
Lights up for inbound
emails
Tap this icon to demo :
Lights up for Text Messages,
Social Media posts &
Messages (Facebook, Twitter,
Skype, WhatsApp, etc.)
Tap this icon to demo :
Lights up for
calendar
reminders,
weather & stock
updates
Tap these icons to
demo :