Post on 06-Mar-2018
transcript
Cooling Water TreatmentFor environmental respect
Henkel´s program for a complete control of your system
These problems cannot beconsidered separately, sincethey are interdependent.Therefore a complete treatment is needed, basedon the combination of different treatments, such ascorrosion inhibitors, scaleinhibitors, dispersants andbiocides, depending on thecharacteristics of the specificsystem and the water.
Henkel’s programs are intended to meet all the needs of cooling systems. They are designed to face all kinds of challenges, which may occur in cooling water systems.
Generally, 3 main problems have to be solved:
Corrosion
Scaling and deposits
Microbiological growth, including Legionella
P3 ferrofos®
Scale inhibitors and dispersants
P3 ferrofos®
P3 cetamine®
P3 ferrolix®
Corrosion inhibitors
P3 ferrocid®
Biocides*
P3 ferrolin®
Cleaners
P3 ferrocryl®
Flocculants
Equipment
Phosphorus-containing and phosphorus-free treatments
Biodegradable products for a low environmental impact
Dispersants to prevent fouling and sedimentation of suspended solids
Biodispersants, for a better efficiency of biocide treatments
Specific treatments for pit water, once-through systems, sea water or recycled wastewater as make-up water
Organic and inorganic formulations
Applications over a wide pH range
Specific alkaline treatments for very acidic and soft water
All in one treatments for closed cooling systems
Brass & Aluminium corrosion inhibition
Approved biocides against Legionella pneumophila
Oxidizing and non-oxidizing biocides for the control of bacteria,fungi and algae
Specific biocides with rapid microbiocidal effect and quickdecomposition after use in the cooling system
Biocides for preventive and curative treatments
Wide range of cleaners for the removal of scale, metal oxides,deposits, oil, mud: compatible with steel, stainless steel, galvanized steel, copper alloys, aluminium
Coagulants and flocculants for the preparation of make-up water
Optimization of lime softening
Control of the biofilm with P3 HydroBio®: a unique field test kit tomeasure the biofilm growth and optimize the dosage of biocide
Equipment for on-line control of our products, our biocides andthe main parameters (e.g. blow-down, hardness)
Equipment for the follow-up of the corrosion rate and biofilmgrowth
Our Technologies Features and Applications
*Use biocides safely. Always read the label and product information before use
Henkel KGaAWater TreatmentHenkelstrasse 6740191 DuesseldorfGermany
Phone: +49 - 211 797 9190Fax: +49 - 211 798 2262E-mail: water.treatment@henkel.comInternet: www.henkel-water.com
The information presented herein corresponds to our interpretationof certain test results and field experience to date. This informationis not to be taken as warranty or representation for which weassume legal responsibility. It is offered solely for your considera-tion, investigation and verification.
® designates trademarks of Henkel KGaA or its affiliates, registeredin Germany and elsewhere. © Henkel KGaA, 2007
Please contact us at water.treatment@henkel.com for further information about all our Water TreatmentTechnologies.
Our offer…
Audits and survey of your plant by our cooling treatment experts
Training of your staff
Cooling water monitoring. On-site or carried out at our Central Analytical Laboratories
Lab and pilot trials, with samples of your industrial water
Representative simulation of your operating conditions, to determine the most suitabletreatment using our dedicated software P3-COOLSOFT TM
On-site product development with our mobilepilot cooling systems
Regular surveys and recommendations on theoperating conditions
Specific research and development projects carried out by our international R&D depart-ment in Duesseldorf
…for the benefit of your water systems
Easy control and follow-up: our treatment programs can be analyzed with easy-to-use quick test kits
Comprehensive technical documentation including toxicological and ecological reports
Improvement of your process performance andheat exchange
Environmentally friendly treatment
Fullfilment of local regulations thanks to our customized offer
Reduction of chemicals consumption and water costs
Reduction of make-up water and maximization of water reuse
Optimization of total operating costs
Optimal service due to highly qualified staff
Continuous product development and improvement
Henkel - your partner for comprehensive solutions
Henkel’s wide network of technical service teams and sales representatives can provide youlocally with reliable tailor-made solutions for your cooling water systems. Our aim is to supportyou reducing water and chemicals consumption, focusing on environmental respect and sustainability.
5000
356
/ 06
.07