Post on 04-Feb-2018
transcript
Cr-Mn AusteniticStainless Steels
Cost Effective Alternative to 18/8 Type AISI-304
REDEFINING VALUES IN STAINLESS STEEL
CM
YK
The Jindal Group, over the last three decades, has
emerged as one of India’s most dynamic business
groups. Founded by Mr. O. P. Jindal, the Group
today is a multi-billion, multi-location, multi-
national and multi-product steel conglomerate.
From mining of iron ore, the Group produces
various products in steel and stainless steel,
including cold rolled sheets / coils, galvanized
sheets / coils, hot rolled plates, hot rolled coils,
submerged arc-welded pipes, hot rolled plates,
billets, rails, seamless tubes, sponge iron, ferro
alloys and other value added products. It has also
diversified in areas such as industrial gases, power
generation and maritime infrastructure.
The Group’s strength lies in its constituent
companies, each one of which is committed
to consolidate its core strength and excel in
their respective areas of operation. The Group
comprises of Jindal Stainless Ltd., Austenitic
Creations Ltd., Jindal Architecture Ltd., Jindal
Stainless Steelway Ltd., PT Jindal Stainless
Indonesia, Jindal Saw Ltd., Jindal United Steel
Inc. (USA), Saw Pipes Inc. (USA), JSW Steel Ltd.,
Jindal Thermal Power Company Ltd., South West
Port Ltd., Jindal Praxair Oxygen Company Pvt.
Ltd., Southern Iron & Steel Company Ltd. and
Jindal Steel & Power Ltd. The Jindal Group has
manufacturing units across India, US, Indonesia
and marketing offices across the globe.
The Group today has become a global player, with
its products accessing even the remotest global
markets. It’s turnover in 2005 was more than $4
billion with over $1 billion in exports. The Group
is committed to maintain world-class quality
standards, efficient delivery schedules, competitive
pricing and excellent after sales service. The
Group’s relentless quest for excellence has reaped
rich benefits and it is today reckoned as one of the
world’s most admired and respected groups within
the steel fraternity.
The Group
CM
YK
CM
YK
The Group echoes values pertinent to a
progressive state, promoting and practicing
actions beyond mere statutory compliance.
As part of sharing social responsibility,
the thrust areas have been: Environment
Protection & Management, promoting
Healthcare & Education, Women’s
Upliftment, Rural Development and Village
Adoption.
The Group is committed towards the
development of its people and the
communities in which it operates. The
technology-driven Group employs over
20,000 people across the globe and aspires
to create benchmarks for the industry world
over.
The Group’s philosophy on corporate
governance envisages the alignment
of the highest levels of transparency,
accountability and equity, in all facets of its
operations and in all its interactions with
its stakeholders including shareholders,
employees and government. The Group
believes that all its operations and actions
must serve the underlying goal of enhancing
overall shareholders’ value, over a sustained
period of time.
Growth has been a way of life for the
Jindal Group and its motto all along has
been ‘Growth with a social conscience’.
The Group is expanding, integrating,
amalgamating and growing.
3CM
YK
CM
YK
Jindal Stainless Ltd., (JSL) is the flagship company
of the Jindal Group. Started in 1970, Jindal
Stainless, is India’s largest integrated manufacturer
of international-quality stainless steel flat products
in Austenitic, Ferritic, and Martensitic grades with
a strong export market, while catering to over 40%
of the Indian market.
The success story of Jindal Stainless is crafted
by its fully integrated operations, with backward
integration starting from mining, melting, casting,
hot rolling to cold rolling. The product range
includes stainless steel slabs and blooms, hot
rolled coils, plates and cold rolled coils/sheets.
Jindal Stainless has always been committed
to innovation and progression, research and
development. Its innovations are admired beyond
the geographical boundaries of the country and
recognized globally. The Company’s achievements
narrate a story of determination to succeed and a
passion to lead.
Hisar plant (Haryana, India)
The plant at Hisar has an annual melting and hot
rolling capacity of 600,000 MT and is ISO: 9001,
ISO: 14001 & OHSAS 18001 certified, indicating
the commitment to quality, safety, health and
environment. The plant also houses an exclusive
complex for manufacturing stainless steel cold
rolled coils, precision strips and coin blanking. As
part of expansion plan, the plant capacity is further
being expanded to 720,000 MT.
Jindal Stainless
CM
YK
CM
YK
Ferro Chrome Operations
Vizag plant (Andhra Pradesh, India)
The Ferro alloys plant at Vizag has an installed capacity of 40,000 MT per annum to produce high carbon ferro chrome.
Orissa plant (Orissa, India)
In the 1st phase of operation, 2x60 MVA ferro chrome furnaces have already been installed and are operational.
Greenfield Project (Orissa, India)
The Company is also in process of setting up of a
1.6 million tons integrated stainless steel plant in
Orissa, which would be the largest single location fully
integrated stainless steel plant in the world.
PT Jindal Stainless (Indonesia)
The acquisition of 60,000 MT stainless steel cold rolling
plant from Maspion Stainless has enhanced the global
presence for the Company and has also helped to
cater to South East Asian markets.
Jindal Stainless Steelway Ltd.
A joint initiative with Steelway s.r.l. of Italy, the
service center provides customised products and
distribution services in stainless steel to meet
specific requirements of slitting / CTL / blanks, for
the customers in the consumer durable, automotive
segments and also supplies to other OEM’s. The state-
of-the art facility near Gurgaon, Haryana, India, houses
high-end precision slitting, cut to length, blanking and
polishing lines.
Jindal Architecture Ltd. (arc)
To expand the horizon of applications of stainless
steel, arc provides practical and aesthetical solutions
in design, fabrication and installation services related
to stainless steel products in architecture, building and
construction segments.
Austenitic Creations Pvt Ltd. (artd’inox)
Placing stainless steel in a fashionable way, artd’inox
offers a range of exquisite lifestyle products in stainless
steel, which are contemporary in design, blended with
elegance and style.
5CM
YK
CM
YK
A cost-effective quality solution with grades which exhibit good strength, corrosion resistance and formability.
J-series Stainless Steels have been
developed as a cost-effective alternative
to 18/8 type (304) grade for certain
applications. These grades contains
Chromium (15.5%-19%), Nickel(1.0%-
5.0%) along with appropriate combination
of Manganese, Copper and Nitrogen. Jindal
Stainless is the largest producer of Chrome
- Manganese stainless steel in the world. It
supplies grades JSL AUS (201 Modified),
J201 (UNS S20100), J4 (S20430 Modified)
-and J204Cu (UNS S20430).
All these grades have austenitic structure in
annealed condition at ambient temperature,
provide higher strength, excellent
formability, weldability and good corrosion
resistance similar to 18/8 (304) stainless
steel in a variety of mild corrosive media.
Addition of Copper enhances drawability,
formability, reduces work hardening rate
and also increases corrosion
resistance in certain environment.
200 series
CM
YK
CM
YK
Merits of 200 series, JSL grades
7CM
YK
CM
YK
Performance 304 301 J201 JSL AUS J204Cu J4 (UNS S30400) (UNS S30100) (UNS S20100) (201 Modified) (UNS S20430) (S20430 Modified)
Strength Good Slightly Better Slightly Better Slightly Better Slightly Better Slightly Better
Formability Slightly Better Good Good Slightly Better Slightly Better Good
Weldability Slightly Better Slightly Better Good Slightly Better Good Good
Crevice Slightly Better Good Good Good Good Good
Corrosion
Pitting Slightly Better Good Good Good Good Good
Jindal Stainless Steel type JSL AUS (201 Modified)
is a Chrome-Manganese-Nickel (min. 4% Nickel)
Austenitic Stainless Steel grade. Modest amount
of Nitrogen added to this steel results in higher
annealed strength than AISI-304. However, Copper
addition reduces work hardening rate to facilitate
cold working/forming. The alloy is non-magnetic
in annealed condition and like AISI-304 becomes
mildly magnetic after cold working. Cold forming
characteristics are superior to AISI-201 and the
chemistry is so optimised as to achieve drawability
similar to AISI-304.
JSL AUS is being used for many applications where
type AISI-304 was traditionally chosen. JSL AUS is
relatively economical compared to AISI-304, having
formability and weldability comparable to AISI-304.
The mechanical properties vary considerably
depending upon the amount of cold work
introduced. The strength of JSL AUS is slightly
higher than conventional austenitic steel (such as
type 304). Considering its lower cost JSL AUS can
replace conventional AISI-304 in a wide range of
applications.
FabricationWelding
Type JSL AUS can be welded by all conventional
methods applied to 304 type of austenitic stainless
steel. Filler wires or electrodes of the conventional
Chromium-Nickel 300 series can be used. Its
susceptibility to intergranular corrosion in weld heat-
affected zone is analogous to AISI-304.
Cold Forming
JSL AUS is very tough, ductile and readily amenable
to deep drawing, bending, stretch forming and
spinning.
JSL AUS (201 Modified)Versatile alternative for multiple applications
CM
YK
CM
YK
Catering and Food Processing
Extra deep drawn utensils, Pressure
cookers, Cook line, Hot food wells,
Beverage dispensers.
Consumer Durables
Spin driers of Washing machines and Dish
washers.
Architecture Building and Construction
Kitchen sinks, Elevators, Escalators, Door
and window frames, Column claddings,
Telephone booths, Steel furniture.
Transport
Automotive trim, Wheel caps, Wiper arms,
Rims, Auto accessories, Truck parts, Cargo
container, Bus bodies, Truck trailers and
Rail cars.
IndustryBeer, Wine, Beverage and Dairy equipment,
Food processing and Packing equipments.
Typical applications for JSL AUS (201 Modified)
9CM
YK
CM
YK
J201 (UNS S20100)An effective alternative
Jindal Stainless Steel type J201 (UNS S20100) is a
Chrome-Manganese-Nickel austenitic stainless steel
similar in properties to AISI-301. J201 in annealed
condition is having fully austenitic structure. J201
can be cold worked to its strength for applications
where strength to weight factors are a consideration.
The combination of high Manganese and Nitrogen
and sufficient Nickel gives this alloy a superior
combination of strength and toughness at ambient
and cryogenic temperatures. J201 possesses good
resistance to oxidation and is comparable to AISI-
301 up to 800º C.
AISI-304 and JSL AUS would be expected to
perform better in more severe deep drawing
application, while J201 material will perform
adequately in most deep drawing applications but
J201 perform better than AISI-304 in more severe
stretch forming applications.
J201 is being used for many applications where type
AISI-301 and 304 were traditionally chosen. J201 is
relatively economical compared to AISI-301 and 304,
having formability and weldability comparable to
AISI-301. J201 is resistant to a wide variety of mild to moderately corrosive media.
FabricationWelding
J201 can be welded by all type of conventional
methods applied to 18/8 steels. Filler wires or
electrodes of the conventional Chromium-Nickel 300
series can be used. Its susceptibility to intergranular
corrosion in weld heat-affected zone is analogous to
AISI-304.
Cold Forming
J201 is very tough, ductile and readily amenable
to deep drawing, bending, stretch forming and
spinning.
CM
YK
CM
YK
Typical applications for J201 (UNS S20100)
Catering and Food Processing
Extra deep drawn utensils, Pressure cookers,
Cook line, Hot food wells, Beverage dispensers
and Icemakers.
Consumer Durables
Spinning basket of Washing machines and Dish
washers.
Architecture Building and Construction
Kitchen sinks, Elevators, Escalators, Door and
window frames, Column claddings, Telephone
booths, Steel furniture, Structural members,
Thermal window spacers, Handrails, Structural
support framework, Internal panels & roofing,
Framework.
Transport
Automotive trim, Wheel caps, Wiper arms, Rims,
Auto accessories, Truck parts, Cargo container,
Bus bodies, Truck trailers, siding and roofing of
Rail cars.
Industry
Beer, Wine, Beverage and dairy equipment,
Food processing and packing equipments, Hose
clamps and Piston rings.
11CM
YK
CM
YK
Jindal Stainless J4 (S20430 Modified) Grade is a
Chromium-Manganese austenitic stainless steel with
moderate amount of Copper, Nickel and Nitrogen.
Balancing of the alloying elements (austenitizers
versus ferritizers) produces an austenitic structure in
annealed condition even at sub zero temperatures.
Manganese and Nitrogen additions render this
grade more economical while endowing it with
good strength and high formability making it highly
suitable for a wide variety of consumer and structural
applications. Significant cost saving can be achieved
by switching products made from Chromium-Nickel
grade 304 to J4. On account of its higher strength,
it also provides some advantages over 304 grade in
certain applications.
Presence of Copper in this steel reduces work
hardening rate and improves drawability. Nitrogen
improves resistance to pitting corrosion. The alloy is
non-magnetic in annealed condition like 304. Thus
J4 can display a wide range of mechanical strength
depending on the degree of cold working, which is
essential for certain structural applications.
Type J4 can be used both in fully annealed condition
and in temper rolled as well as cold rolled condition.
FabricationWelding
Type J4 can be welded by all conventional methods
applied to 18/8 type of austenitic stainless steel.
Filler wire or electrodes of the conventional
Chromium-Nickel 300 series stainless steel can be
used.
Cold Forming
Tough and ductile and readily amenable to drawing, bending, stretch forming and spinning.
J4 (S20430 Modified)Efficient and affordable option
CM
YK
CM
YK
Typical applications for J4 (S20430 Modified)
Catering
Shallow/medium drawn utensils, Tableware, Cutlery,
Stands for water filters, In-house water tanks and
Dog pots.
Consumer Durables
Steel furniture, Fruit stands, Flower vases, Decorative
pipes and tubes, Gas stoves and Gift items.
Architecture Building and Construction
In-house panels, Handrails and structural support
framework, Door knobs, Hinges and Dust bin.
Transport
Roll formed sections and Conveyors.
Industrial
Material handling equipment.
13CM
YK
CM
YK
J204Cu (UNS S20430) is a Chrome-Manganese
stainless steel belonging to 200 series of austenite
stainless steel family with moderate amounts of
Nickel, Copper and Nitrogen. Addition of Copper
to austenitic stainless steel increases stacking
fault energy, reduces work hardening rate and
enhances formability. It improves corrosion
resistance in certain media and stress corrosion
cracking resistance. Nitrogen increases strength and
pitting resistance of stainless steels. Manganese
as austenite former replaces a part of Nickel and
has beneficial effect on weldability. Consequently,
J204Cu has a higher annealed strength, similar
corrosion resistance in a variety of mild corrosive
media and similar formability and weldability in
comparison with 304. It can replace Type 304 in
numerous applications where higher strength and
lower cost is required.
FabricationWelding
Type J204Cu can be welded by all conventional
methods applied to 18/8 type of austenitic stainless
steel. Filler wire or electrodes of the conventional
Chromium-Nickel 300 series stainless steel can be
used. Resistance to intergranular corrosion can be
restored by post weld annealing treatment.
Cold Forming
J204Cu can readily be cold rolled, cold drawn and
formed in similar manner as Type 304. J204Cu can
take upto 80% cold reduction without intermediate
annealing. It is less magnetic than 304 on cold
working.
J204Cu (UNS S20430)Widening application
CM
YK
CM
YK
Catering and Food Processing
Deep drawn utensils, Cookware, Industrial kitchen
equipment, Flasks, Milk cans, Ice and water
dispensers, Water filters.
Consumer Durables
Toasters, Microwave ovens, Thermo wares, Baking
ovens.
Architecture Building and Construction
Handrails for staircase, Elevators, Escalators, Internal
panels, Springs, Door window frames, Thermal
window spacers.
Transport
Structural material for vehicles.
Industry
Tobacco processing industry.
Typical applications for J204Cu (UNS S20430)
15CM
YK
CM
YK
ChemistryGRADE Elements %C %Mn %S %P %Si %Cr %Ni %N %Cu Fe
Min. - - - - - 18 8 - - Balance
Max. 0.08 2 0.03 0.045 0.75 20 10.5 0.1 - Balance
Min. - - - - - 16 6 - - Balance
Max. 0.15 2 0.03 0.045 1 18 8 0.1 - Balance
Min. - 5.5 - - - 16 3.5 - - Balance
Max. 0.08 7.5 0.005 0.06 0.75 18 5.5 0.15 - Balance
Min. - 6 - - - 16 4 - 1.5 Balance
Max. 0.08 8 0.005 0.06 0.75 18 6 0.1 2 Balance
Min. - 6.5 - - - 16 1.5 0.1 2 Balance
Max. 0.1 9 0.005 0.06 0.75 17.5 3.5 0.2 4 Balance
Min. - 8.5 - - - 15.5 1 - 1.5 Balance
Max. 0.1 10 0.005 0.06 0.75 16.5 2 0.2 2 Balance
Jindal Stainless Steels are refined by AOD/VOD process to achieve very low sulphur levels and high degree of cleanliness to exhibit superior corrosion resistance.
AISI 304 (UNS S30400)
AISI 301(UNS S30100)
J201 (UNS S20100)
JSLAUS(201 Modified)
J204Cu(UNS S20430)
J4(S20430 Modified)
CM
YK
CM
YK
Mechanical properties
17CM
YK
CM
YK
GRADE UTS (Mpa) YS (Mpa) % Elongation Hardness Erichsen (HRB) Cupping Value
Co. Std 515 min. 205 min. 40 min. 92max -
Typical 620 260 56 83 12.8
Co. Std 515 min. 205 min. 40 min. 95 max. -
Typical 800 285 50 88 12.3
Co. Std 515 min. 260 min. 40 min. 95 max. -
Typical 730 370 55 93 12.3
Co. Std 620 min. 265 min. 40 min. 95 max. -
Typical 690 310 56 89 12.8
Co. Std 650 min. 310 min. 40 min. 100 max. -
Typical 795 415 52 96 12.1
Co. Std 650 min. 325 min. 40 min. 100 max. -
Typical 830 430 48 98 12.3
AISI 304 (UNS S30400)
AISI 301(UNS S30100)
J201 (UNS S20100)
JSLAUS(201 Modified)
J204Cu(UNS S20430)
J4(S20430 Modified)
Corrosion tests have been conducted in NaCl solution
and organic acids present in food media. Sodium chloride
solution was selected as one of the media as chloride
ion is notorious for its ability to penetrate passive films
and cause pitting. Sodium chloride is also a common
ingredient in food preparations. The extreme situation
in the case of brackish waters is the composition of sea
water which carries 3% NaCl. Hence, this concentration
of NaCl was taken up as a suitable medium for immersion
test. Acetic acid is present in vinegar and it is common
to use vinegar in kitchen. When milk deteriorates, lactic
acid is produced. Hence, a mixture of lactic acid and
acetic acid was chosen as the second medium. 10,000
parts per million (1%) of the organic acids is a very large
concentration not met with in sour milk or vinegar. Hence,
this high concentration taken as the limit was used for
the tests with this acid mixture. Citric acid is commonly
present in fruit juices and tartaric acid is an ingredient
in tamarind extracts. Here again, the concentration of
10,000 PPM of a mixture of the two acids was chosen to
get accelerated results.
Corrosion in various food application media
CM
YK
CM
YK
19CM
YK
CM
YK
Test Media 304 301 J201 JSL AUS J4 J204Cu (UNS (UNS (UNS (201 (S20430 (UNS S30400) S30100) S20100) Modified) Modified) S20430)
3% NaCl for 720 hrsat RT (25º C) A A A A A A
3% NaCl for 100 hrs at Boiling Temp. A A A A A A
0.5% Citric + 0.5 % Tartaric for 720 hrs at RT A A A A A A
0.5% Citric + 0.5 % Tartaric for 100 hrs Boiling A A A A A A
0.5% Acetic + 0.5% Lactic for 720 hrs at RT A A A A A A
0.5% Acetic + 0.5 % Lactic for 100 hrs at Boiling Temp A A A A A A
A < 0.1 mmperyr B 0.1 - 1 mmperyr C 1 - 3 mmperyr D 3 - 10 mmperyr E > 10 mmperyr
Intergranular corrosion test as per ASTM A 262- practice E
Test Media 304 301 J201 JSL AUS J4 J204Cu (UNS (UNS (UNS (201 (S20430 (UNS S30400) S30100) S20100) Modified) Modified) S20430)
Cu-CuSo4+16% H2So4 Passed Passed Passed Passed Passed Passed
Note: Grades JSL AUS (201 Modified), J201 (UNS S20100), J204Cu (UNS S20430) & J4 (S20430 Modified) however should not be used for external applications in coastal areas with medium to heavy rainfall. These grades are not recommended for handling/storage of acids and other highly corrosive industrial chemicals.
Manufacturing range
CM
YK
CM
YK
Product Thickness Width Length Surface Finish Edge (mm) (mm) (mm) Slab 160/200 600 - 1270 15000 As Cast & Ground - (max)
Bloom 160x160/ 200x200 - 10000 As Cast & Ground - (max)
Hot Rolled 4.0 - 50.0 1250 7000 Hot Rolled (Black) / Sheared /Sheet / Plate (max) (max) No. 1 (HR Annealed Plasma / Mill & Pickled)
Hot Rolled Coil 2.8 - 6.5 1250 Coil Hot Rolled (Black) / Trim / Mill (max) No. 1 (HR Annealed & Pickled) Cold Rolled Coil 0.4 - 2.0 1000(max) Coil / Sheet (CR Annealed and Pickled Trim / Mill / 0.5 - 4.0 1250 (max) 2D/2B/No.3/No.4) Slitted Cold Rolled 0.05 - 0.5 600 (max) Coil 2B Trim / Mill /Precision SlittedStrips
Dimensions can also be customised to meet specific requirements. These values are subject to change without prior notice.
Surface finishes
NOTICE:Information in this document is only for explanation of general characteristics and properties of JSL products, not for guarantee of the material. We have made all efforts to ensure accuracy of the information printed in this brochure, the use of information is at reader’s risk and no warranty is implied or expressed by JSL with respect to the use of information contained herein. Technical information in this brochure is subject to change by environment condition and the purpose of use.
21CM
YK
CM
YK
Surface Definition ApplicationsFinishes No. 1 Hot rolled, annealed, shot blasted Pipes, Tubing, General Fabrication and pickled.
No. 2D Cold rolled annealed and pickled. Sinks, Automotive trims, Heat exchanger
No. 2B Cold rolled, annealed, pickled Food industry, Cookware, Medical equipment, and skin passed. Construction material, White goods, Rail car, Trailer bodies
No. 3 Cold rolled, annealed, pickled Kitchen equipments, Restaurants, Building and polished with 100 to 120 grit. construction, Medical equipment
No. 4 Cold rolled, annealed pickled Restaurants, Kitchen utensils, Building construction, and polished with 150 to 180 grit. Medical equipment
Scotch Very fine hairline finish generated Architectural purposes, Railway cabins, Elevator Brite by polishing with rolls made out interiors, Panelling, Kitchen appliances of scotch brite material.
Chennai 4C, Century Plaza, 560-562 Anna Salai, Teynampet, Chennai - 600 018Tel: +91 44 24313935 Fax: +91 44 24329146e-mail: info.chennai@jindalsteel.com
Delhi Jindal Centre, 12 Bhikaiji Cama Place, New Delhi - 110066Tel: +91 11 26188340-50, 26188360-80 Fax: +91 11 26101562 / 41659169 e-mail: info@jindalsteel.com
Gurgaon Plot No. 64, IInd Floor, Phase-IV, Udyog Vihar, Gurgaon -122016Tel: +91 124 5127700 Fax: +91 124 5127777 e-mail: info.gurgaon@jindalsteel.com
Hyderabad Technopolis, 302/B, Begumpet, 1-10-74/B, Hyderabad-500016Tel: +91 40 55209201, 55278326 Fax: +91 40 55209202e-mail: info.hyderabad@jindalsteel.com
Kolkata41, Shakespeare Sarani, 3A, Duckback House, Kolkata - 700017 Tel: +91 33 22473616, 22477398, 22477721 Fax: +91 33 22476203 e-mail: info.kolkata@jindalsteel.com
Mumbai25C, Parmanandwari, Opp. Bank of Baroda, 11/43,Thakurdwar Road, Mumbai - 400002 Tel: +91 22 22092962 / 64 / 56304713 / 56307088 Fax: +91 22 56304715 e-mail: info.mumbai@jindalsteel.com
VadodaraIst Floor, BBC Towers, Sayajigunj, Vadodara - 390 005Tel: +91 265 2225004/5 Fax: +91 265 2362162 e-mail: info.vadodara@jindalsteel.com
Offices in India
CM
YK
CM
YK
China(Guangzhou) Unit 1107, Zhengsheng Building, No. 5-9, Tien He Bei Road, Guangzhou, Pc: 510075, P. R. China Tel: +86 20 87558862 / 87558855 Fax: +86 20 87558856e-mail: info.china@jindalsteel.com
China(Wuxi) 2E, Hua Guang Building, 333, Zhongshan Road, Wuxi, Jiangsu, P.R. China, Pc: 214001Tel: +86 510 2732291 Fax: +86 510 2737423e-mail: info.china@jindalsteel.com
IndonesiaIndonesia Kawasan Industry Maspion, Maspion Unit-V Desa, Sukomylyo-Manyar, Gresik 61151, Jawa Timur-IndonesiaTel: +62 31 3959565 Fax: +62 31 3959566 e-mail: info.indonesia@jindalsteel.com
RussiaKazanskaya, 46/12, St. Petersburg 190000, Russia Tel: +7 812 3123626 e-mail: info.russia@jindalsteel.com
USA4320, Winfield Road, Suite 200, Warrenville, IL, 60555 USATel: +1 630 8368764 Fax: +1 630 8368762 e-mail: info.usa@jindalsteel.com
Vietnam157A, Nguyen Van Thu St., Dist. 1, HCM City, VietnamTel: +84 8 8233 021 Fax: +84 8 8238 945 e-mail: info.vietnam@jindalsteel.com
Global offices
23CM
YK
CM
YK
Jindal Stainless Ltd., Jindal Centre, 12 Bhikaiji Cama Place, New Delhi - 110066, Tel: +91 11 26188340-50, 26188360-80 Fax: +91 11 41659169/26101562
e-mail: info@jindalstainless.com website: www.jindalstainless.com
CM
YK