Post on 22-Dec-2021
transcript
2
Introduction
▪ PVC-U-made fittings for PVC pipe unions▪ Any fluid distribution network can be designed by combining these fittings properly.▪ Unions:- Solvent cemented unions. The most common type of union. Glued pipes and fittings have male-female connections. The union is made by using a PVC adhesive which, correctly applied on the indicated areas, provides the system with a real cold-soldered joint. This kind of union improves the system’s tensile strength. - Rubber ring joint unions. The female end of the pipe/fitting is designed to lodge an elastic ring that ensures the system’s water-tightness. Assemblies are quick, easy and allow some direction variations. - Threaded unions (with or without reinforcement)- Adaptor unions (different kind of unions combined in one fitting)
Cepex Sales Folder01PVC Pressure Fittings
3
Introduction: function of the fittings
Cepex Sales Folder
CAP/BUSH. They close blind-ended ramifications
FLANGES. They allow pipe unions and adding of fluid conduction mechanisms to the system
CLAMP SADDLES. Used to add water-intakes from the main distribution network to the new system
UNION SOCKETS. They join pipe sections
REDUCTIONS. They join pipes with different diameters
PIPE CLIPS. Fixation components used to fix pipes (to the ground, wall…) in non-buried installations
TEES. Used for conduction derivations
ELBOWS & CURVES. They join pipe sections and allow changes in direction and inclinations of the system (45º, 90º)
01PVC Pressure Fittings
▪ They are the required items in order to make it possible to extend, connect, redirector derive pipes. These are the most common ones:
4
Introduction: PVC pipes
▪ The use of PVC piping has gotten more and more common in any type of fluid distribution installation. This is mainly due to their:
- Low cost- High resistance- Light weight- Simple and easy connections
▪ It is recommended not to build any PVC installation in the outside because of the material’s low resistance to sunlight. The protection of the PVC piping can be ensured by using special UV-resistant paints or by just burying the whole insallation.
▪ Standards :- Glued PVC fittings: EN 1452-3 standard- PVC pipes EN 1452-2 standard
Cepex Sales Folder01PVC Pressure Fittings
5
Advantages, benefits & inconveniencies
Good physical features: strength, rigidity and elasticityLight-weight pipes and fittings make installations easierLow costSuited for food transportationBiologically not harmfulRecyclableExcellent chemical resistanceResistant to internal and external corrosionLow temperature and pressure lossEasy to assemble
Not recommended for aromatic hydro-fuels transportation (f.eg. Gasoline)Not UV-resistant without special paint treatmentFragile at near 0ºC temperatures
Cepex Sales Folder01PVC Pressure Fittings
6
Cepex PVC Pressure Fittings
▪ Sizes from D16 to D315▪ Service pressure at 20ºC (73ºF), water temperature:
- D16 - D140: PN 16- D160 - D315: PN 10- Threaded unions: PN 10
▪ Range:- Solvent cemented fittings- Threaded and adaptor fittings- Threaded fittings- Rubber ring joint fittings- Flanges- Liquid sighting-tubes- Flowmeters- Adhesives and solvents
Cepex Sales Folder01PVC Pressure Fittings
8
Cepex Sales Folder
▪ Anatomy af a fitting:
01PVC Pressure Fittings
- Cepex logo- Material
- Size- PN
- EN 1452 (european standard)
- N (if the fitting is AENORcertified)
- Kiwa (if the fitting is Kiwacertfified)
- NF (if the fittings is AFNORcertified for sizes >= D63)
Marked every 45º. Fittings are markedevery 45º by a visible marking.
Cepex PVC Pressure Fittings
9
Cepex Sales Folder
▪ PVC fittings can be used with:
Rigid PVC-U pipe Flexible PVC pipe
01PVC Pressure Fittings
Cepex PVC Pressure Fittings
10
Certifications
▪ Cepex’s PVC fittings have the most demanding approvals given by various international certification organisations:
- AENOR- AFNOR- Kiwa- WRAS- LVHT- ACS- etc.
Cepex Sales Folder01PVC Pressure Fittings
11
Certifications
▪ AENOR(Asociación Española de Normalización y Certificación)
- Country: Spain- Since 1989. Nowadays, Cepex PVC pressure fittings are still the only ones to have AENOR’s quality mark.
Cepex Sales Folder01PVC Pressure Fittings
12
▪ AFNOR(Association française de normalisation)
- Country: France- Only the most important manufacturers in Europe have the NF certification. Nowadays, Cepex is still the only spanishmanufacturer to be certified by AFNOR.
Cepex Sales Folder
Certifications
01PVC Pressure Fittings
13
▪ Kiwa
- Country: Holland- Only the most important manufacturers in Europe have the Kiwa certification. Nowadays, Cepex is still the only spanishmanufacturer to be certified by Kiwa.
Cepex Sales Folder
Certifications
01PVC Pressure Fittings
14
▪ WRAS
- Country: United Kingdom- Only the most important manufacturers in Europe have the Wras certification. Nowadays, Cepex is still the only spanishmanufacturer to be certified by WRAS.
Cepex Sales Folder
Certifications
01PVC Pressure Fittings
15
▪ ACS(Attestation de Conformité Sanitaire)
- Country: France- Only the most important manufacturers in Europe have the ACS certification. Nowadays, Cepex is still the only spanishmanufacturer to be certified by the ACS.
Cepex Sales Folder
Certifications
01PVC Pressure Fittings
16
▪ LVHT(Lehr- und Versuchsgesellschaft für innovativeHygienetechnik mbH)
- Country: Germany- Only the most important manufacturers in Europe have the LVHT certification. Nowadays, Cepex is still the only spanishmanufacturer to be certified by this german standard.
Cepex Sales Folder
Certifications
01PVC Pressure Fittings
17
Features & benefits
Besides the metric system, Cepex can also supply british standard fittingsBritish standard (BS)
New packaging, with improved standards and inner sub-standards. They make selling (sub-standards in bags) and buying fittings (less units per box) easier
Renewed packaging (2005)
Cepex also has a complete range of PVC-U valves (ball valves, butterfly valves, check valves,...)Complete system
Cepex’s PVC fittings have the most demanding homologations given by various international certification organisations
Certified quality (AENOR/AFNOR/Kiwa/WRAS/...)
More than 30 years of experience in PVC fitting injectionExperience
Very few manufacturers have such a complete range of fittings and accessoriesComplete range in figures and sizes
The range
BenefitFeature
Cepex Sales Folder01PVC Pressure Fittings
18
Makes the identification of the fitting while building an installation much easierMarked fittings (sizes, material, PN and logo)
The fitting
Aesthetically bettered. Less probability of finding imperfections in the partMechanically cut material excesses in injection
Ensures an optimal quality of any part or product leaving the fabricSeveral tests are made for each fabrication lot
Suited for drinking water and designed to optimize the fabrication of the fittings. These fittings have much better mechanical features than the ones obtained by using the market’s standard material
PVC-U (own formula)
Makes the installation easier, allowing any kind of pipe direction
Elbow 90º D20 - D63Elbow 45º D16 - D63Te 90º D20 - D63
BenefitFeature
Cepex Sales Folder
Features & benefits
01PVC Pressure Fittings
19
▪ Glued: clean pipe and fitting, apply adhesive with a brush, join longitudinally fitting and pipe and do not touch nor move during the established drying time. • Calculate deformations and install taking in account coefficients and ambient temperature. • Screwed: to ensure water-tightness, use Teflon tape.• Detailed instructions can be found in the technical catalogue.
Installation
Cepex Sales Folder01PVC Pressure Fittings
20
Quality▪ Controlling raw materials:
- Reology (curve of fusion and curve of dynamic stability)- Thermostatic stability- Density- Vicat- Water absorption- Viscosity- UV resistance- Mineral charges- Resistance to Izod impact
▪ Controlling finished product:- Heat tests- Dimensional controls- Hydrostatic pressure (1 hora y 1000 horas)- Alternate pressure - Deformation mechanical tests
Cepex Sales Folder
Each one of these tests are described in detail in the CSF dedicated to qualitytests
01PVC Pressure Fittings
21
Packaging
Cepex Sales Folder
New sticker design:- Includes Cepex’s logo and the product’s corresponding certifications.- Improved automatic bar-code reading (better location)
New box design:- Highly resistant box- Sub-standard: plastic bags
01PVC Pressure Fittings
22
Applications
▪ Industry
Michelin (China)
Dosification and pumping station (Portugal)
Cepex Sales Folder01PVC Pressure Fittings
23
▪ Water treatment
Swimming-pool Filtration system (Palau Sant Jordi)
Zoomarine
Cepex Sales Folder
Applications
01PVC Pressure Fittings
24
▪ Irrigation
Irrigation system in a greenhouse (Murcia – España)
Cepex Sales Folder
Filtration station (Tasmania – Australia)
Applications
01PVC Pressure Fittings
27
CAD
Cepex Sales Folder01PVC Pressure Fittings
▪ 3D/2D CAD Library
- Free download of 3D and 2D models through www.cepex.com.
- All Cepex products catalogue available.
- Multiformat.
- Multilanguage.
29
CepexSalesFolder12/2006
COPYRIGHT © CEPEX HOLDING, S.A.
Av. Ramon Ciurans, 40Pol. Ind. Congost - Parcel·la 608530 La Garriga (Barcelona) Spaincepex@cepex.comwww.cepex.com
01 PVC Pressure Fittings02 PP Compression Fittings03.s Ball Valves [STD] Series NEW!03.i Ball Valves [IND] Series NEW!03 Ball Valves04 Check Valves05.s Butterfly Valves Standard Series NEW!05.i Butterfly Valves Industrial Series NEW!05.c Butterfly Valves Classic Series06 Valve Boxes Pro Series07 PE 100 Fittings08 PVC Flexible Pipe09 Actuated Valves10 Hydraulic Valves11 Filtration
A Plastics MarketB Fluid DynamicsC Plastic TypesD Union TypesE Quality Tests