Post on 29-Jul-2018
transcript
Delivery Program
chemical and mineralprocess equipmentB.V.
2
About Us
Out of the TEMA Holding N.V., for the purpose
of establishing a worldwide sales organization,
which is responsible selling the products of the
group, TEMA B.V. was established on the 12th
March 1981.
TEMA B.V. is responsible for the sales of those
products which are manufactured within
our group and also of some complementary
products which are produced outside our
group of companies.
TEMA B.V. is responsible for the following
countries and continents:
The Netherlands, Belgium (Flanders), the
biggest part of Asia, Middle East, Latin America.
SeParation
that
binDS.
TEMA B.V. is specialized in machines and
systems for the processing of basic materials
in the minerals-, chemicals-, food-, dairy- and
pharmaceutical industry and offers machines &
systems for separation of solids & liquids, for
classification as well as crushing and pulverizing
of several raw materials.
In the meantime TEMA B.V. has established
a sound network of local agents and also
opened an office in PR of CHINA (TEMA Beijing
Representative Office) to provide optimal
service to our customers.
3
Some of the products we process
Salt
EPS
Lactose
Gravel
Woodchips
Coal
4
Centrifuges
TEMA / SIEBTECHNIK
CONTURBEX Centrifuge
The most versatile of our centrifuges is the
worm/screen centrifuge. Products such as
crystals, granulates or fibres but especially
salt crystals and fertilizers will be successfully
separated.
TEMA / SIEBTECHNIK
Pusher Centrifuge
Pusher centrifuges in single-, double- or
triple-step execution with cylindrical/conical
screen basket are especially selected when
low loss of solids, good washing or low mois-
ture are required.
TEMA / SIEBTECHNIK
CONTHICK Centrifuge
The design of this centrifuge is based on the
technology of our CONTURBEX worm/screen
centrifuge with additional pre-thickening unit
for high efficiency seperation of low solids
concentration slurry as well as high recovery
of solids.
5
Centrifuges
TEMA / SIEBTECHNIK
DECANTER Centrifuge
The solid bowl decanter centrifuge is used to
separate fine crystals and fine powder from
slurry. Also most of the industrial waste wa-
ter streams can be thickened with the solid
bowl decanter.
For special performance also TWIN-CONE
and TURBO-SCREEN decanters are available.
TEMA / SIEBTECHNIK
VIBRATORY Centrifuge
High throughputs up to 350 t/h of solids,
mainly used in coal washeries and sea salt
plants.
TEMA / SIEBTECHNIK
TURBO CASCADE Centrifuge
The Turbo Cascade Slide Centrifuge is used
for de-watering of nylon granulates PE, PP
and PS beads. Final moistures down to 0,01
% are being attained.
6
Centrifuges
TEMA / SIEBTECHNIK
TWIN-CONE Decanter Centrifuge
The same as with the decanter centrifuge,
only with an additional larger cone to cre-
ate more area for separation and to obtain
higher g-forces for lower final moistures and
a clear liquid separation.
TEMA / SIEBTECHNIK
THE TUBE Decanter Centrifuge
Combines the benefits of the solid bowl
centrifuge and the worm/screen centrifuge,
especially designed for high mass flow rates,
for large clarification volumes (variable design),
with large screen length (variable design),
large open screen area, patented screen
change from the outside, patented special
wear protection, patented special overload
device, and split gears up to 50.000 Nm.
TEMA / SIEBTECHNIK
SHORT-BOWL Decanter Centrifuge
This Short-Bowl Decanter Centrifuge is from
a similar centrifuge housing design as our
Conturbex centrifuge, but with rotating parts
as a solid bowl decanter with a short bowl,
suitable to separate fine solids with a high-
specific weight out of a slurry.
7
Dryer / Cooler
TEMA / TEMA PROCESS
Fluidized Bed Cooler
The product fluidization in combination with
the shaking movement gives optimum per-
formance to final product quality. Mainly
used in chemical, mineral, fertilizer and food
industries.
TEMA / TEMA PROCESS
Fluidized Bed Dryer/Cooler
As with the fluidized bed cooler, the dryer/
cooler gives a dry, free-flowing product. The
fluidized bed dryer/cooler can be supplied
with dust cyclones, bag filter units or wet
scrubber.
TEMA / SIEBTECHNIK
Centrifuge Pilot Installation
All centrifuges can be tested on pilot scale in
SIEBTECHNIK‘s centrifuge laboratory.
Performance- and scale-up tests can be
done in this laboratory. These centrifuges
can also be sent-out in the field, if product
requires this.
8
Screening Machines
TEMA / SIEBTECHNIK
Screening Machine Type HG
Both linear and circular motion screening
machines with screening areas from 0,3 -
50 m2 are used for applications like sand and
gravel, minerals, fertilizers, salts, sugar, com-
post etc - both wet and dry screening.
TEMA / SIEBTECHNIK
Screening Machine Type BHG
Linear motion screening machine, both in
single deck and in double deck execution,
with screening areas from 0,3 up to 50 m2,
with two to five sections with gradually flat-
tening inclination, for applications like coal,
ores, minerals, potash, limestone resp. sand
and gravel – both wet and dry screening.
TEMA / SIEBTECHNIK
Elliptical Motion Screening Machine
Combines the advantages of circular and
linear motion screens, thus ensuring higher
specific throughputs and less blinding, with
double shaft drive with electronic control
with infinitely variable angle of throw and
vibration frequency, adjustable during opera-
tion.
9
Screening Machines
TEMA / SIEBTECHNIK
Screening Machine Type MDS
For high capacity in a small area, with accu-
rate cuts even with smaller apertures, clas-
sifying of difficult materials, for applications
with relatively high content of marginal par-
ticles and a critical moisture.
TEMA / HEIN, LEHMANN
LIWELL Screening Machine
Non-blinding operation because of high
accelaration up to 50 g. For all kinds of bulk
materials and ideal for dry classification with
up to 20 % moisture.
TEMA / SIEBTECHNIK
SM Jig
Are especially suitable to separate relatively
light materials, like wood and other organic
materials from gravel and other kinds of stone;
also suitable to separate several minerals.
These machines take care of a sufficient
purity of the final product and can easily be
introduced in existing installations.
10
Sample Taking / Size Reduction
TEMA / SIEBTECHNIK
Sample Taking
Automatic sample taking and preparation
plants for mineral and chemical bulk prod-
ucts. The rotating hammer sampler costs
less to install and to operate and is accepted
by international standards.
Depending on requirement various other
primary sample takers, like spoon-, bucket-,
chute- and many other sample takers are
available.
TEMA / SIEBTECHNIK
Sample Preparation
A wide range of sample preparation ma-
chine is available, line turnstile dividers,
rotary dividers, rotary pipe dividers and mass
dividers, as well as sample collectors, sample
transport systems, laboratory instruments
and automatic moisture analyser system.
TEMA / SIEBTECHNIK
Sample Pulverizing
The laboratory disc mill is available in dif-
ferent sizes and grinding barrels in different
materials of construction for fine pulverizing
of mineral samples. Suitable for all analytical
processes.
11
Sample Taking / Size Reduction
TEMA / SIEBTECHNIK
Hammer and Hammer Impact Mills
are suitable for crushing soft to medium
hard materials (degree of hardness accord-
ing to F. Mohs 2 - 5).
For example:
Agglomerates, coal, limestone, gypsum and
slag.
They are designed for large throughput vol-
umes and trouble-free operation.
TEMA / SIEBTECHNIK
Double and Single Roller Mills
are suitable for crushing brittle materials of all
hardnesses, such as rock, ores, coal, coke, etc.
The material to be crushed is pulled by friction
into the gap between two rollers rotating in
opposite directions. The material is crushed
by pressure and shearing action. This results
in an uniform size of the discharge with few
fines.
TEMA / SIEBTECHNIK
ESM Eccentric Vibrating Mill
Vibrating mills are suitable for size reduction of all brittle materials. The attainable ulti-mate fineness is app. 0-5 micron. Mills are suitable for mechanical-chemical activation processes.The new ESM vibrating mill has many advan-tages over the conventional vibrating mill like:higher throughput, reduction of energy, shorter milling time, both batch- and con-tinuous operation
Steenplaetsstraat 22 - 26
2288 AA Rijswijk The Netherlands
postal address
P.O. Box 3220
2280 GE Rijswijk The Netherlands W B 9 0 3 e / 1 0 . 2 0 1 1
T +31 (0) 70 390 65 55
F +31 (0) 70 399 33 90
www.tema.nl
sales@tema.nl
chemical and mineralprocess equipmentB.V.