Post on 02-Apr-2016
description
transcript
DEMO CARBON
DEMO CARBON WHO IS IT FOR?
The Demo is about pushing the boundaries, and is for the Downhill racer seeking a competitive edge. These riders are looking to shave every tenth of a second out of their time by racing a bike capable of handling the gnarliest terrain, while being lightweight enough to accelerate out of corners and maneuver down the sport’s most technically demanding terrain.
FRAME DETAILS – ASYMMETRICAL We came up with an all-new asymmetrical frame with a lower center of gravity, while
simultaneously simplifying shock access and maintaining overall frame stiffness.
The frame’s fully internal, no-hassle cable routing keeps the cables off the paint and
makes the drivetrain and brakes easier to set up. The BB30 bottom bracket pivot
works in conjunction with the chainstay to connect the front and rear triangles.
And, it looks freakin rad!
Three main contributors making the new Demo the ultimate in handling DH terrain.
DH S3 GEOMETRY• The low geometry is headlined with a 63.5° headtube angle, a low, 343mm BB
height, and a short, 430mm rear end
• The geometry is built around 650b wheels
• The S3 Geometry is Style-Specific Sizing. The frame sizes are dependent on the
rider’s style, not how tall they are. With a low seat tube and standover height on all
sizes, the rider should first consider if they prefer a shorter, snappier-handling top
tube and wheelbase or a longer, more stable top tube and wheelbase
• Short & Medium sizes share the same seat tube height, while the Long & X-Long
are the same at 1 inch higher
ALL-NEW FSR LAYOUT The engineering team wanted to reduce weight and lower the center of gravity of
the rear end, so they designed an all-new concentric BB pivot with matching
kinematics as the previous Demo. The 200mm of FSR travel remains active and
independent, while the main pivot is lower than before, rotating around the bottom
bracket. The floating seatstay keeps the pedaling and braking forces separate from
suspension activity, while the standard size 135x12mm axle has been engineered to
stiffen the rear end with a unique L7 axle construction.
MATED ÖHLINS SUSPENSION
By building the FSR linkage and Öhlins shocks together, the shocks can be tuned
for the needs of the Demo rider, providing the range needed for varied race courses,
while not including unnecessary clicks or adjustments. The low-hysteresis, twin-tube
system is unparalleled in its control and consistency. It’s still the TTX shock, but has
been tuned for the new Demo platform:
• 5mm off-set head to tuck up into the frame with updated spherical bearings
• Rvemoval of the shock yoke extension & off-set geo cam
• Shorter rebound knob for easier spring removal
• Reduced mid-speed compression for more control on initial hits
• Increased high-speed compression for increased control when “at the limit”
HANDLING
LIGHTWEIGHT FRAMECreating a lighter chassis is important for maneuverability and acceleration.
Three major contributors:
• The FACT 11m frame is a full front and rear carbon frame, complete with carbon link.
The FACT 10m frame has the same front triangle and carbon seatstay, with an
aluminum alloy chainstay and link
• S-Works frame (medium) is 7.6 pounds with full paint (no shock or protectors)
• The asymmetrical seat tube may seem like it would have to be overbuilt to support
the seat post and rider. However, the loads on those tubes, combined with the new
FSR configuration, allows us to make one tube with more surface area than two
smaller tubes. The result: a lighter-weight frame and easier-to-access shock, plus
takes the legendarily unique style of the Demo to new heights
• Includes an integrated downtube protector for both FACT 11m + 10m frames
CUSTOMIZABLEIt’s important that every rider be able to add their own touches to their bike,
that’s part of what makes it theirs!
• The standard size 12x135mm rear end will fit a wide variety of hubs with the
unique L7 square axle square axle compatibility
• The shock rides on ball bearings for extra smooth action, but doesn’t require a
unique length or mounting hardware—it’s the standard 9.5x3” design
• The 1.5” headtube will work with any standard fork, as we use 1-1/8” steerer tubes
• The Demo uses a focused 7-gear system to be narrow, fast, and only have the gears
needed. We use a 135mm rear end with an 83mm BB30 bottom bracket
• The seat tube is 30.9mm
WE GOT QUESTIONSQ: NO WAY THE FRAME IS STIFF ENOUGH, IT’S MISSING HALF OF THE SEAT TUBE!! RIGHT?
A: We went through years of testing, and the results are impressive and super cool!
The frames were tested through simulation, in the lab, and (of course) by our in-house pro riders and Factory DH team. The rear triangle is stiffer than the
previous demo, the front slightly less stiff. Overall, the new frame is close to the same stiffness
Q: SO SIZING ISN’T BASED ON MY HEIGHT… WHICH ONE SHOULD I GET?
A: We kept the t-shirt sizing from before, so a good starting point is to look at your
old DH bike (small, medium, large, etc.) and match that to Short, Medium, Long,
etc. Even better, would be to look at the reach measurement, as height (also the stack measurement) is not as important. Finally, look at our riders for inspiration:
Troy Brosnan (5’7) - rides a medium
Aaron Gwin (5’10) - rides a long as he likes the longer, more stable wheelbase
Mitch Ropelato (5’8) - rides a medium as he likes a tighter, whippy bike
Brad Benedict (6’1) - rides a long in the park and an X-Long for racing
SIZE SHORT MEDIUM LONG X-LONG
SEAT TUBE LENGTH - CENTER TO TOP 394MM 394MM 419MM 419MM
TOP TUBE LENGTH (HORIZONTAL) 577MM 588MM 613MM 633MM
TOP TUBE LENGTH (ACTUAL) 495MM 525MM 545MM 560MM
CHAINSTAY LENGTH 430MM 430MM 430MM 430MM
BOTTOM BRACKET HEIGHT 343MM 343MM 343MM 343MM
SEAT TUBE ANGLE (ACTUAL) 61.0° 61.0° 61.0° 61.0°
SEAT TUBE ANGLE (EFFECTIVE) 76.0° 76.0° 76.0° 76.0°
HEAD TUBE ANGLE 63.5° 63.5° 63.5° 63.5°
WHEEL BASE 1184MM 1209MM 1233MM 1253MM
STANDOVER HEIGHT 702MM 707MM 712MM 718MM
HEAD TUBE HEIGHT 105MM 105MM 115MM 115MM
HANDLEBAR WIDTH 780MM 780MM 780MM 780MM
STEM LENGTH 45MM 45MM 45MM 45MM
CRANK LENGTH 165MM 165MM 165MM 165MM
SEATPOST LENGTH 300MM 300MM 300MM 300MM
STACK 614MM 614MM 623MM 623MM
REACH 395MM 420MM 440MM 460MM
GEOS AND SUCH
S-WORKS DEMO 8
DEMO 8 I CARBON
CARB/GRN/WHT
• FACT 10m carbon frame w/ 650b S3 Geometry for elite DH racing
• Legendary suspension tuners Öhlins make the ultimate bike and shock combo
• RockShox Boxxer RC fork w/ 200mm of travel & 20mm Maxle is tuned for gnarly terrain
• Roval 650b rims w/ Hi Lo hubs are lightweight and durable for smooth handling at speed
• World Cup-proven Specialized Butcher DH front and Slaughter DH rear tires
RED/CARB
• FACT 11m carbon frame w/ 650b S3 Geometry for elite DH racing
• Legendary suspension tuners Öhlins make the ultimate bike and shock combo
• RockShox Boxxer Team 650b, 200mm-travel fork is tuned for the world's gnarliest terrain
• Roval 650b rims w/ DT Swiss quick-engagement Star Ratchet rear hub makes for a lightweight and durable for smooth handling at speed
• World Cup-proven Specialized Butcher DH front and Slaughter DH rear tires
CARB/CHAR
S-WORKS DEMO 8 FRAME
CARB/BLK
CARB/YEL/WHT
• FACT 11m carbon frame w/ 650b S3 Geometry for elite DH racing
• Legendary suspension tuners Öhlins make the ultimate bike and shock combo
• Micro-adjustable Thomson alloy seatpost is super strong and light weight
2F0FOOT OUT, FLAT OUT
PEDAL CONNECTIVITY WHY: All-Mountain and Gravity riders need to control their bikes through challenging terrain. Riders need the ability to get their feet on and off the pedals quickly and easily,
HOW: For 2FO Flat, our Slipnot rubber is tuned to provide pedal grip and durability, and uses a directional “sharkskin” profile for additional grip when riding with dropped heels. The hexagonal tread pattern is tight in the pedal zone to provide consistent feel and uses a more open pattern in the toe and heel for off the bike traction. 2FO Clip focuses on the shoe/pedal interface with a dual durometer Slipnot sole specifically tuned to make clipping in and out effortless. Our “Landing Strip” design uses a firmer durometer rubber and low-profile tread design around the cleat pocket to help guide rider’s feet into the pedals quickly and easily. Additionally, the rounded edge of the outsole reduces friction while engaging the pedals.
WHAT: Slipnot compound is used in both 2FO models and is specifically tuned based on the rider’s pedal preference. The different rubber blends have been developed with the compounding experts on our tire team.
RIDER COMFORT WHY: Riders need footwear that is comfortable in variable conditions and terrain, both on and off the bike. Whether lapping the bike park or out for an all-day ride, comfort and efficiency can make or break the ride.
HOW: 2FO is built on a new last with our relaxed fit that provides riders with a balance of pedal feel and off-bike performance. The upper and tongue are constructed with an “air mesh” material that has the cushioning of foam, but is highly breathable and does not retain water. This material allows the shoes to keep riders cool and keeps the wet weight of the shoes light and aids faster drying times. Like all Specialized mountain bike shoes, the 2FO family is built with our Body Geometry system, that decreases fatigue, increases comfort, and improves pedaling performance by supporting the riders arch and balancing the foot and knee for optimal pedaling efficiency. The clip version uses an extended 4mm cleat slot that allows for a rearward (Body Geometry Neutral) cleat setup. Riding with the included Body Geometry footbeds allows riders to position their cleats rearward for increased comfort without sacrificing pedaling performance.
2FO Clip uses our “Lollipop” sole construction; a 3/4 nylon plate in the pedaling zone that is dropped into the EVA sole. This construction allows for efficient pedaling performance, while providing impact absorption and flex in the toe and heel for hiking.
WHAT: The fit, performance, and Body Geometry features found in all Specialized shoes built into a platform perfect for the on and off bike needs of All-Mountain and Gravity riders.
PROTECTIONWHY: Riders want confident protection in technical, rocky terrain, allowing them to focus on their lines, instead of worrying about injuring their feet.
HOW: At the front of the shoe, 2FO uses an injection molded toe bumper that protects riders against anything from rock strikes to trail obstacles. Over the forefoot, an anti-tear polyurethane coated mesh provides ventilation without sacrificing durability. At the cuff, the shoes use an increased
collar height on the medial side to deflect crankarm and chainstay strikes.
WHAT: Toe to heel protection and durability features that provide confidence without a weight
(Clip 450g / Flat 395g) or breathability penalty.
WHY IT'S GREAT
2FO CLIP
2FO FLAT
BLK/NEON BLU BLK/RED
RED/BLK WHT/BLK
• Slipnot™ rubber compound developed in our tire lab to optimize shoe to pedal connectivity
• Directional sharkskin tread profile grips pedals, with open rear hex pattern for traction
• Injection molded toe kick, anti-tear toe, and high side cuff for lightweight armoring
• Air mesh upper construction adds protection while quickly shedding water weight
• Smooth thermobonded upper for lightweight durability and a snag-free profile
• Cushioned EVA midsole is sealed with a protective skin for support and tear resistance
• Body Geometry equipped to optimize comfort and performance
• Lacelock™ elastic keeps laces in place and clear of snags. Extra set of color laces included
• Relaxed-fit for a balance of pedal feel and off-bike comfort
• Approximately 395g (1/2 pair 9US/42EU)
BLK/RED
LT GREY/GREY
• Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clippedals. Dual durometer sole uses firm rubber to control clip-in, and softer rubber for toe and heel traction
• Stiff Lollipop™ 3/4 cycling plate for high performance pedaling sits in a bed of EVA to soften landings and keep off-bike traction high
• Injection molded toe kick, anti-tear toe, and high side cuff for lightweight armoring
• Air mesh upper construction adds protection while quickly shedding water weight
• Smooth thermobonded upper for lightweight durability and a snag-free profile
• Cushioned EVA midsole is sealed with a protective skin for support and tear resistance
• Body Geometry equipped to optimize comfort and performance
• Lacelock™ elastic keeps laces in place and clear of snags. Extra set of color laces included
• Relaxed-fit for a balance of pedal feel and off-bike comfort
• 2-bolt cleat pattern for compatibility with all major pedals
• Approximately 450g (1/2 pair 9US/42EU)
GRAVITY EQUIPMENT
NEON BLU/HYP GRN
DEMO PRO LONG SLEEVE JERSEY DEMO PRO SHORT
BLK/WHT MOTO GRN/WHT
MOTO GRN/PUR
HYP GRN/BLK
BLK WHT/BLK
• Demo uses a higher volume fit that can
accommodate the use of pads while keeping a
performance feel on anything from bike park laps,
shuttle runs, or your favorite back-country mission
• Durability is key for gravity riders and the fabrics in
the Demo collection were chosen because of their
abrasion resistance and ability to withstand abuse
• Comfort and mobility were not overlooked,
with laser-cut venting and stretch materials to
keep riders cool and in control while riding
Just like the new world-class Demo 8 Downhill bike, the Demo apparel line is born from speed, style, and pushing the
boundaries of conventional design. Tested and refined by pro Gravity athletes like Kyle Norbraten and the Coastal Crew,
the Demo gear was perfected for the rigors of the sport’s most demanding big-bike terrain.
BUTCHER DH
The tread of choice for our World Cup DH Team. The Butcher tires excel in even the gnarliest terrain with fast rolling, ramped center knobs and perfectly sized shoulder knobs for bite in the corners.
• Casing: 60 TPI, Dual Ply
• Compound: Base 70a / Top 42a
• Bead: Wire
• Pinch Protection: Butyl inserts at bead
The Slaughter provides riders with a tire option that rolls fast and still offers confident cornering. A low-profile center tread ensures low-rolling resistance and secure braking, while tall side knobs provide the bite needed for cornering traction.
• Casing: 60 TPI, Dual Ply
• Compound: Base 70a / Top 42a
• Bead: wire
• Pinch Protection: Butyl Inserts at bead
SLAUGHTER DH
ÖHLINS DEMO TTX SHOCK ABSORBER
The new benchmark in DH shock technology, developed by the leader in performance suspension.
• The original gold, and new mountain bike, suspension standard
• Ball joint on the upper eyelet allows shock to float and reduces side loading
• Motocross-inspired internal bladder
• Ultra-fine spring rates to ensure proper spring rates for all weights (springs sold separately)
• Adjustments: high and low speed compression, rebound damping
ÖHLINS DEMO SPRING
A new benchmark for spring rate accuracy.
• Ultra-fine spring rates to ensure perfect set up for all weights
• Spring rates are broken down to 4 N/mm (23 lbs./in)
• Only fits Öhlins TTX shock absorber