Post on 16-Oct-2021
transcript
ICB REVISED 9 / 2019
DES IGN GU IDE
Features and specifications are subject to change at any time without notice.
Throughout this guide, dimensions may vary by ± 3 mm.
TA B L E O F C O N T E N T S
3 M S E R I E S O V E N S
15 E S E R I E S O V E N S
27 C O N V E C T I O N S T E A M O V E N S
32 S P E E D O V E N S
37 M I C R O W A V E O V E N S
42 W A R M I N G D R A W E R S
47 I N D U C T I O N C O O K T O P S
52 G A S C O O K T O P S
56 M O D U L E C O O K T O P S
64 C O F F E E S Y S T E M S
69 C U P W A R M I N G D R A W E R S
73 VA C U U M S E A L D R A W E R
77 D U A L F U E L R A N G E S
82 S E A L E D B U R N E R R A N G E T O P S
86 O U T D O O R G R I L L S | M O D U L E S | A C C E S S O R I E S
97 C O O K T O P V E N T I L AT I O N
108 D O W N D R A F T V E N T I L AT I O N
113 P R O V E N T I L AT I O N
120 W O L F W A R R A N T I E S
wolfappliance.com | 3
M Series Built-In Ovens
Four striking looks are just the beginning. Superior perfor-mance features include our advanced Dual VertiCross™ convection fan system, touch-screen controls, convenient preset cooking programs, and improved interior lighting. There is more usable space inside for deliciousness on a grand scale. M series ovens can be installed in a standard or flush inset application.
M SERIES OVENS
UPPER OVEN LOWER OVEN
M SERIES OVENS
TRANSITIONAL
ICBSO30PM/S/PH
ICBSO30CM/B
ICBSO30TM/S/TH
ICBDO30PM/S/PH
ICBDO30CM/B
ICBDO30TM/S/TH
PROFESSIONAL
CONTEMPORARY
ICBSO30CM/S
ICBDO30CM/S
4 | English
M SERIES OVENS
M Series Built-In Ovens
TRANSITIONAL SINGLE OVEN
TRANSITIONAL DOUBLE OVEN
OPEN OVEN DOOR584 mm
BEHIND FRAME
723mm
686mm
65mm
46 mm
543mm
22mm
36 mmCONDUITCHANNEL
218mm
51 mm
759 mm
724 mm
OPEN OVEN DOOR
584 mmBEHIND FRAME
1291mm
1254mm
65mm
46 mm
543mm
22mm
36 mmCONDUITCHANNEL
218mm
51 mm
759 mm
724 mm
wolfappliance.com | 5
M SERIES OVENS
M Series Built-In Ovens
PROFESSIONAL SINGLE OVEN
OPEN OVEN DOOR584 mm
BEHIND FRAME
723mm
686mm
83mm
46 mm
543mm
22mm
36 mmCONDUITCHANNEL
218mm
51 mm
759 mm
724 mm
UPPER OVEN LOWER OVEN
OPEN OVEN DOOR
584 mmBEHIND FRAME
1291mm
1254mm
759 mm
46 mm
543mm
83mm
22mm
36 mmCONDUITCHANNEL
218mm
51 mm
724 mm
PROFESSIONAL DOUBLE OVEN
6 | English
M SERIES OVENS
OPEN OVEN DOOR
584 mmBEHIND FRAME
1291mm
1254mm
46 mm
543mm
22mm
36 mmCONDUITCHANNEL
218mm
51mm
759 mm
724 mm
OPEN OVEN DOOR584 mm
BEHIND FRAME
723mm
686mm
46 mm
543mm
22mm
36 mmCONDUITCHANNEL
218mm
51mm
759 mm
724 mm
M Series Built-In Ovens
CONTEMPORARY STAINLESS STEEL SINGLE OVEN
CONTEMPORARY STAINLESS STEEL DOUBLE OVEN
wolfappliance.com | 7
M SERIES OVENS
OPEN OVEN DOOR
584 mmBEHIND FRAME
1291mm
1254mm
46 mm
543mm
25mm
36 mmCONDUITCHANNEL
218mm
51 mm
759 mm
724 mm
OPEN OVEN DOOR584 mm
BEHIND FRAME
723mm
686mm
46 mm
543mm
25mm
36 mmCONDUITCHANNEL
218mm
51 mm
759 mm
724 mm
M Series Built-In Ovens
CONTEMPORARY BLACK GLASS SINGLE OVEN
CONTEMPORARY BLACK GLASS DOUBLE OVEN
8 | English
M SERIES OVENS
Planning Information
The M series oven can be installed in a standard or flush inset application. If a cooktop is installed above an oven, a minimum of 6 mm is required between the units. Location of the electrical supply within the oven opening may require additional cabinet depth.
Finish the edges of the opening. They may be visible when the door is open.
For standard installations, the face trim will overlap stiles and rails. Refer to the chart below.
For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT MIN
Single Oven 115 kgDouble Oven 181 kg
TRIM OVERLAP
Top 25 mmBottom 0 mmSides 18 mm
DUAL INSTALLATION
Two 76 cm single M series ovens can be installed side by side in a standard or flush inset application. A dual instal-lation kit is required. To maintain appropriate airflow, the ovens must be installed into one opening. Any cosmetic or structural material placed between the ovens will impede airflow and is not recommended. Refer to the illustrations on the following pages.
The dual installation kit is available through an authorized Wolf dealer.
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply flush with the back wall and within the shaded area shown in the illustration for your spe-cific installation on the following pages. For ease of instal-lation, the electrical supply for the oven can be placed in an adjacent cabinet within reach of the conduit.
Performance may be compromised if the electrical supply is less than 220 volts.
The oven is supplied with a single phase and 3-phase convertible power inlet box. The wiring diagram covering the control circuit is provided with the oven.
ELECTRICAL REQUIREMENTS
SINGLE OVEN SINGLE PHASE 3-PHASE
Required Power Supply 220-240 V AC 50/60 Hz
380-415 V AC 50 Hz
Maximum Connected Load 4.2–4.8 kW 3.0–3.6 kW
DOUBLE OVEN SINGLE PHASE 3-PHASE
Required Power Supply 220-240 V AC 50/60 Hz
380-415 V AC 50 Hz
Maximum Connected Load 8.4–9.6 kW 4.2–4.8 kW
wolfappliance.com | 9
M SERIES OVENS
M Series Single Oven
STANDARD INSTALLATION
E127mm
E
E
102mm
FRONT VIEWSIDE VIEW
NOTE: Location of electrical supply within opening may require additional cabinet depth.
591 mmOPENING
DEPTH
TOP VIEW
699 mmOPENINGHEIGHT
WOPENING WIDTH
OPENING WIDTH W
76 cm Model 724 mm
10 | English
M SERIES OVENS
M Series Single Oven
FLUSH INSET INSTALLATION
E127mm
102mm
FRONT VIEWSIDE VIEW
*25 mm minimum depth. Shaded areas will be visible and should be finished to match cabinetry.**22 mm for transitional, professional and contemporary stainless steel models and 25 mm for contemporary black glass model.***Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth.
730 mmFLUSH INSET
HEIGHT***
29 mm
3 mm
21 mm
610 mmFLUSH INSET
DEPTH
22 mmOR
25 mm**FINISHEDCLEATS*
WFLUSH INSET WIDTH***
TOP VIEW
E
E
FLUSH INSET WIDTH W
76 cm Model 765 mm
wolfappliance.com | 11
M Series Double Oven
STANDARD INSTALLATION
E127mm
102mm
E
E
FRONT VIEWSIDE VIEW
NOTE: Location of electrical supply within opening may require additional cabinet depth.
1267 mmOPENINGHEIGHT
591 mmOPENING
DEPTH
WOPENING WIDTH
432 mmTYPICAL
TOP VIEW
OPENING WIDTH W
76 cm Model 724 mm
M SERIES OVENS
12 | English
M Series Double Oven
FLUSH INSET INSTALLATION
E127mm
102mm
FRONT VIEWSIDE VIEW
*25 mm minimum depth. Shaded areas will be visible and should be finished to match cabinetry.**22 mm for transitional, professional and contemporary stainless steel models and 25 mm for contemporary black glass model.***Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth.
1299 mmFLUSH INSET
HEIGHT***
29 mm
3 mm
21 mm
610 mmFLUSH INSET
DEPTH
22 mmOR
25 mm**FINISHEDCLEATS*
WFLUSH INSET WIDTH***
432 mmTYPICAL
TOP VIEW
E
E
FLUSH INSET WIDTH W
76 cm Model 765 mm
M SERIES OVENS
wolfappliance.com | 13
M SERIES OVENS
E127mm
102mm
E127mm
102mm
E E
FRONT VIEWSIDE VIEW
NOTE: Location of electrical supply within opening may require additional cabinet depth. A dual installation kit is required for this installation.
TOP VIEW
591 mmOPENING
DEPTH
699 mmOPENINGHEIGHT W
OPENING WIDTH
M Series Single Oven
DUAL STANDARD INSTALLATION
DUAL OPENING WIDTH W
Two 76 cm Models 1486 mm
14 | English
M SERIES OVENS
E127mm
102mm
E127mm
102mm
FRONT VIEWSIDE VIEW
TOP VIEW
EE
FINISHEDCLEATS*
*25 mm minimum depth. Shaded areas will be visible and should be finished to match cabinetry.**22 mm for transitional, professional and contemporary stainless steel models and 25 mm for contemporary black glass model.***Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth. A dual installation kit is required for this installation.
730 mmFLUSH INSET
HEIGHT***
29 mm
3 mm
21 mm
610 mmFLUSH INSET
DEPTH
22 mmOR
25 mm**
WFLUSH INSET WIDTH***
M Series Single Oven
DUAL FLUSH INSET INSTALLATION
DUAL FLUSH INSET WIDTH W
Two 76 cm Models 1527 mm
wolfappliance.com | 15
ICBSO24TE/S/TH
E Series Built-In Ovens
Stainless models feature a redesigned stainless steel touch-action control panel, helping to create great meals with ease, as well as adding a striking design feature to the kitchen. Smart technology gives the E series ten cooking modes, with Wolf’s innovative dual convection in single ovens and in the upper unit of double ovens. Wolf E series ovens are crafted of stainless steel. Tubular handles have been updated to match the rest of the new Wolf cooking appliance offering, providing a more cohesive look. E series ovens can be installed in a standard or flush inset application.
E SERIES OVENS
E SERIES OVENS
TRANSITIONAL
WARM LIGHT TEMP MODE TIMER TIME OFFOK
ICBSO2418TE/S/TH
ICBSO30CE/B/TH
ICBSO30TE/S/TH
ICBDO30TE/S/TH
ICBDO30CE/B/TH
ICBSO30PE/S/PH
ICBDO30PE/S/PH
PROFESSIONAL
CONTEMPORARY
16 | English
E SERIES OVENS
60 cm E Series Ovens
MODEL ICBSO2418TE/S/TH TRANSITIONAL SINGLE OVEN
MODEL ICBSO24TE/S/TH TRANSITIONAL SINGLE OVEN
OPEN OVEN DOOR
546 mmBEHIND FRAME
597mm
591mm
64mm
559 mm
460mm
22 mm
597 mm
OPEN OVEN DOOR
454mm
446mm
64mm
538 mm
360mm
22 mm
597 mm 546 mmBEHIND FRAME
WATER LIGHT TEMP MODE TIMER TIME OFFOK
wolfappliance.com | 17
E SERIES OVENS
76 cm E Series Ovens
TRANSITIONAL SINGLE OVEN
603 mmBEHIND FRAME
708mm
759 mm
CONDUITCHANNEL 689
mm
70mm
76 mm
718 mm
559mm
244mm
225mm
25 mm
OPEN OVEN DOOR
OPEN OVEN DOOR
603 mmBEHIND FRAME
1280mm
1261mm
759 mm 70mm
CONDUITCHANNEL
718 mm
559mm
244mm
225mm
76 mm
25 mm
TRANSITIONAL DOUBLE OVEN
18 | English
E SERIES OVENS
76 cm E Series Ovens
PROFESSIONAL SINGLE OVEN
603 mmBEHIND FRAME
708mm
759 mm
CONDUITCHANNEL 689
mm
86mm
76 mm
718 mm
559mm
244mm
225mm
25 mm
OPEN OVEN DOOR
OPEN OVEN DOOR
603 mmBEHIND FRAME
1280mm
1261mm
759 mm
CONDUITCHANNEL
718 mm
559mm
244mm
225mm
76 mm
25 mm
86mm
PROFESSIONAL DOUBLE OVEN
wolfappliance.com | 19
E SERIES OVENS
OPEN OVEN DOOR
603 mmBEHIND FRAME
1280mm
1257mm
759 mm 76mm
32 mm
CONDUITCHANNEL
76 mm
718 mm
559mm
244mm
225mm
OPEN OVEN DOOR
603 mmBEHIND FRAME
708mm
759 mm
32 mm
687mm
76mm
CONDUITCHANNEL
76 mm
718 mm
559mm
244mm
225mm
76 cm E Series Ovens
CONTEMPORARY SINGLE OVEN
CONTEMPORARY DOUBLE OVEN
20 | English
Planning Information
The E series oven can be installed in a standard or flush inset application. If a cooktop is installed above an oven, a minimum of 6 mm is required between the units. Location of the electrical supply within the oven opening may require additional cabinet depth.
Finish the edges of the opening. They may be visible when the door is open.
For standard installations, the face trim will overlap stiles and rails. Refer to the chart below.
For flush inset installations, a minimum 6 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT MIN
60 cm Single Oven 68 kg76 cm Single Oven 115 kg76 cm Double Oven 181 kg
TRIM OVERLAP 60 cm MODEL 76 cm MODEL
Top 6 mm 13 mmBottom 0 mm 3 mmSides 17 mm 17 mm
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply flush with the back wall and within the shaded area shown in the illustration for your specific installation on the following pages. For ease of installation, the electrical supply for the oven can be placed in an adjacent cabinet. The 76 cm ovens are supplied with a terminal box convertible to single or 3-phase.
The wiring diagram covering the control circuit is provided with the oven.
ELECTRICAL REQUIREMENTS
60 cm SINGLE OVEN
Electrical Supply 220-240 V AC, 50 HzService 3400 WReceptacle grounding-type (earthed)Power Cord 1.8 m
ELECTRICAL REQUIREMENTS
76 cm SINGLE OVEN SINGLE PHASE 3-PHASE
Required Power Supply 220-240 V AC 50/60 Hz
380-415 V AC 50 Hz
Max Connected Load 4.4 kW 4.4 kWTotal Amps 19 19
76 cm DOUBLE OVEN SINGLE PHASE 3-PHASE
Required Power Supply 220-240 V AC 50/60 Hz
380-415 V AC 50 Hz
Max Connected Load 7.4 kW 5.1 kWTotal Amps 32 22
E SERIES OVENS
wolfappliance.com | 21
E SERIES OVENS
60 cm E Series Oven
STANDARD INSTALLATION
E
FRONT VIEWSIDE VIEW
HOPENINGHEIGHT
546 mmOPENINGDEPTH*
TOP VIEW
562 mmOPENING WIDTH
*Does not include additional depth for the electrical connection.
OPENING HEIGHT H
ICBSO2418TE/S/TH 449 mm
ICBSO24TE/S/TH 591 mm
22 | English
E SERIES OVENS
E
603 mmFLUSH INSET WIDTH**
FRONT VIEWSIDE VIEW
568 mmFLUSHINSET
DEPTH***22 mm
*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.***Does not include additional depth for the electrical connection.
HFLUSH INSET
HEIGHT**
10 mm
3 mm
TOP VIEW
21 mm
FINISHEDCLEATS*
60 cm E Series Oven
FLUSH INSET INSTALLATION
FLUSH INSET HEIGHT H
ICBSO2418TE/S/TH 467 mm
ICBSO24TE/S/TH 603 mm
wolfappliance.com | 23
76 cm E Series Single Oven
STANDARD INSTALLATION
E127mm
E
E
102mm
FRONT VIEWSIDE VIEW
NOTE: Location of electrical supply within opening may require additional cabinet depth.
610 mmOPENING
DEPTH
TOP VIEW
692 mmOPENINGHEIGHT
724 mmOPENING WIDTH
E SERIES OVENS
24 | English
E SERIES OVENS
E127mm
102mm
FRONT VIEWSIDE VIEW
*Will be visible and should be finished to match cabinetry.**25 mm for professional and transitional models and 32 mm for contemporary model.***Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth.
721 mmFLUSH INSET
HEIGHT***
19 mm
10 mm
24 mm
635 mmFLUSH INSET
DEPTHFINISHEDCLEATS*
772 mmFLUSH INSET WIDTH***
25 mmOR
32 mm**
TOP VIEW
981 mmTYPICAL
E
E
76 cm E Series Single Oven
FLUSH INSET INSTALLATION
wolfappliance.com | 25
E SERIES OVENS
E127mm
102mm
E
E
FRONT VIEWSIDE VIEW
NOTE: Location of electrical supply within opening may require additional cabinet depth.
1264 mmOPENINGHEIGHT
610 mmOPENING
DEPTH
724 mmOPENING WIDTH
432 mmTYPICAL
TOP VIEW
76 cm E Series Double Oven
STANDARD INSTALLATION
26 | English
76 cm E Series Double Oven
FLUSH INSET INSTALLATION
E127mm
102mm
E
E
FRONT VIEWSIDE VIEW
*Will be visible and should be finished to match cabinetry.**25 mm for professional and transitional models and 32 mm for contemporary model.***Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth.
1292 mmFLUSH INSET
HEIGHT***
432 mmTYPICAL
19 mm
10 mm
24 mm
772 mmFLUSH INSET WIDTH***
635 mmFLUSH INSET
DEPTHFINISHEDCLEATS*
25 mmOR
32 mm**
TOP VIEW
E SERIES OVENS
wolfappliance.com | 27
CONVECTION STEAM OVENS
Convection Steam Ovens
The legacy of the “combination oven” goes back decades, to innovative chefs in America and Europe who embraced the combination of air movement with superheated steam to achieve superior results—from breads and roasts to delicate fishes, seafood, and vegetables. Wolf combines the benefits of convection and steam for the most innovative steam oven on the market today. Virtually any dish prepared in a con-ventional oven, range, or microwave can also be prepared in the Wolf convection steam oven—with more control. Two widths and three distinct styles compliment the look of Wolf ovens, ranges, and cooktops. Convection steam ovens can be installed in a standard or flush inset application.
CONVECTION STEAM OVENS
TRANSITIONAL
ICBCSO30TE/S/TH
ICBCSO30TM/S/TH
PROFESSIONAL
ICBCSO30PE/S/PH
ICBCSO30PM/S/PH
ICBCSO30CM/B/TH
ICBCSO24TE/S/TH
CONTEMPORARY
ICBCSO30CMB
ICBCSO30CMS
28 | English
CONVECTION STEAM OVENS
OPEN OVEN DOOR
454mm
446mm
64mm
538 mm
360mm
22 mm
546 mmBEHIND FRAME
WWIDTH
Convection Steam Ovens
TRANSITIONAL
PROFESSIONAL
OPEN OVEN DOOR
454mm
446mm
83mm
538 mm
360mm
22 mm
759 mm 546 mmBEHIND FRAME
CONTEMPORARY
454mm
446mm
64mm
22 mm
759 mm
OPEN OVEN DOOR
538 mm
360mm
546 mmBEHIND FRAME
WIDTH W
60 cm Transitional 597 mm
76 cm Transitional 759 mm
wolfappliance.com | 29
CONVECTION STEAM OVENS
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply as shown in the illustrations on the following pages. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
Performance may be compromised if the electrical supply is less than 220 volts.
ELECTRICAL REQUIREMENTS
Electrical Supply 220-240 V AC, 50 Hz
Service 3800 W
Receptacle grounding-type (earthed)
Power Cord 1.8 m
Planning Information
The convection steam oven can be installed in a standard or flush inset application.
Finish the edges of the opening. They may be visible when the door is open.
For standard installations, the face trim will overlap stiles and rails. Refer to the chart below.
For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT MIN
60 cm Model 45 kg76 cm Model 45 kg
TRIM OVERLAP 60 cm MODEL 76 cm MODEL
Top 5 mm 5 mmBottom 0 mm 0 mmSides 18 mm 98 mm
30 | English
Convection Steam Oven
STANDARD INSTALLATION
E
FRONT VIEWSIDE VIEW
TOP VIEW
WOPENING WIDTH
546 mmOPENINGDEPTH*
*Does not include additional depth for the electrical connection.NOTE: Both 60 cm and 76 cm models require the same opening dimensions.
449 mmOPENINGHEIGHT
CONVECTION STEAM OVENS
OPENING WIDTH W
60 cm Model 562 mm
76 cm Model 562 mm
wolfappliance.com | 31
Convection Steam Oven
FLUSH INSET INSTALLATION
E
WFLUSH INSET WIDTH**
FRONT VIEWSIDE VIEW
22 mm
*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.***Does not include additional depth for the electrical connection.
8 mm
3 mm
A
TOP VIEW
FINISHEDCLEATS*
568 mmFLUSHINSET
DEPTH***
460 mm FLUSH INSET
HEIGHT**
CONVECTION STEAM OVENS
FLUSH INSET WIDTH W A
60 cm Model 603 mm 21 mm
76 cm Model 765 mm 102 mm
32 | English
SPEED OVENS
Speed Ovens
The Wolf speed oven has features that make fast meals better meals. Available in 60 cm and 76 cm widths, they are designed to match Wolf transitional, professional, and contemporary products. The speed oven can be installed in a standard or flush inset application.
SPEED OVENS
TRANSITIONAL
ICBSPO30TM/S/TH
ICBSPO24TE/S/TH
ICBSPO30TE/S/TH
ICBSPO30PE/S/PH
ICBSPO30PM/S/PH
PROFESSIONAL
ICBSPO30CM/B/TH
CONTEMPORARY
wolfappliance.com | 33
SPEED OVENS
WWIDTH
454mm
64mm
360mm
22 mm
OPENOVEN DOOR
538 mm
446mm
546 mmBEHIND FRAME
Speed Ovens
TRANSITIONAL
PROFESSIONAL
454mm
446mm
83mm
538 mm
360mmOPEN
OVEN DOOR
759 mm 546 mmBEHIND FRAME
22 mm
CONTEMPORARY
454mm
64mm
360mmOPEN
OVEN DOOR
538 mm
446mm
759 mm 546 mmBEHIND FRAME
22 mm
WIDTH W
60 cm Transitional 597 mm
76 cm Transitional 759 mm
34 | English
SPEED OVENS
Planning Information
The speed oven can be installed in a standard or flush inset application.
Finish the edges of the opening. They may be visible when the door is open.
For standard installations, the face trim will overlap stiles and rails. Refer to the chart below.
For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
If the speed oven is installed above or below a Wolf E series oven in a flush inset application, a 6 mm reveal is required.
INSTALLATION REQUIREMENTS
BASE SUPPORT MIN
60 cm Model 57 kg76 cm Model 57 kg
TRIM OVERLAP 60 cm MODEL 76 cm MODEL
Top 5 mm 5 mmBottom 0 mm 0 mmSides 18 mm 98 mm
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply as shown in the illustrations on the following pages. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
Performance may be compromised if the electrical supply is less than 220 volts.
ELECTRICAL REQUIREMENTS
Electrical Supply 220-240 V AC, 50 Hz
Service 2800 W
Receptacle grounding-type (earthed)
Power Cord 1.2 m
wolfappliance.com | 35
SPEED OVENS
E
FRONT VIEWSIDE VIEW
NOTE: 60 cm and 76 cm models require the same opening dimensions.
449mm
OPENINGHEIGHT
584 mmOPENING
DEPTH
TOP VIEW
WOPENING WIDTH
Speed Oven
STANDARD INSTALLATION
OPENING WIDTH W
60 cm Model 562 mm
76 cm Model 562 mm
36 | English
SPEED OVENS
E
WFLUSH INSET WIDTH**
FRONT VIEWSIDE VIEW
610 mmFLUSH INSET
DEPTH22 mm
*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.
460mm
FLUSH INSETHEIGHT**
8 mm
3 mm
A
TOP VIEW
FINISHEDCLEATS*
Speed Oven
FLUSH INSET INSTALLATION
FLUSH INSET WIDTH W A
60 cm Model 603 mm 21 mm
76 cm Model 765 mm 102 mm
wolfappliance.com | 37
PROFESSIONAL
CONTEMPORARY
MICROWAVE OVENS
Microwave Ovens
As true cooking instruments, Wolf microwave ovens have features that make fast meals better meals. The new drop-down door microwaves feature a door that hinges at the bottom. Drop-down door microwaves are designed to match Wolf transitional, professional, and contemporary products. Microwave ovens can be installed in a standard or flush inset application.
DROP-DOWN DOOR MICROWAVES
TRANSITIONAL
ICBMDD30TE/S/TH
ICBMDD30TM/S/TH
ICBMDD30PE/S/PH
ICBMDD30PM/S/PH
ICBMDD30CM/B/TH
ICBMDD24TE/S/TH
38 | English
MICROWAVE OVENS
546 mmBEHIND FRAME
OPEN OVEN DOOR
454mm
64mm
360mm
22 mm 538 mm
446mm
WWIDTH
WIDTH W
60 cm Model 597 mm
76 cm Model 759 mm
Drop-Down Door Microwave Ovens
TRANSITIONAL
PROFESSIONAL
OPEN OVEN DOOR
454mm
446mm
83mm
538 mm
360mm
22 mm
759 mm 546 mmBEHIND FRAME
CONTEMPORARY
546 mmBEHIND FRAME
OPEN OVEN DOOR
454mm
64mm
360mm
22 mm 538 mm
446mm
759 mm
wolfappliance.com | 39
MICROWAVE OVENS
Planning Information
DROP-DOWN DOOR MICROWAVE
The drop-down door microwave oven can be installed in a standard or flush inset application.
Finish the edges of the opening. They may be visible when the door is open.
For standard installations, the face trim will overlap stiles and rails. Refer to the chart below.
For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT MIN
Drop-Down Door Microwave 57 kg
TRIM OVERLAP 60 cm MODEL 76 cm MODEL
Top 5 mm 5 mmBottom 0 mm 0 mmSides 18 mm 98 mm
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply as shown in the illustrations on the following pages. The receptacle may also be located in an adjacent cabinet within reach of the power cord. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
ELECTRICAL REQUIREMENTS
Electrical Supply 220-240 V AC, 50/60 Hz
Service 1600 W
Receptacle grounding-type (earthed)
Power Cord 1.2 m
40 | English
MICROWAVE OVENS
Drop-Down Door Microwave Oven
STANDARD INSTALLATION
E
FRONT VIEWSIDE VIEW
449 mmOPENINGHEIGHT
TOP VIEW
WOPENING WIDTH
*Does not include additional depth for the electrical connection.NOTE: Both 60 cm and 76 cm models require the same opening dimensions.
546 mmOPENINGDEPTH*
OPENING WIDTH W
60 cm Model 562 mm
76 cm Model 562 mm
wolfappliance.com | 41
MICROWAVE OVENS
Drop-Down Door Microwave Oven
FLUSH INSET INSTALLATION
*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.***Does not include additional depth for the electrical connection.
E
WFLUSH INSET WIDTH**
FRONT VIEWSIDE VIEW
FINISHEDCLEATS*
25 mm
460 mm FLUSH INSET
HEIGHT**
8 mm
3 mm
A
TOP VIEW
571 mmFLUSHINSET
DEPTH***
FLUSH INSET WIDTH W A
60 cm Model 603 mm 21 mm
76 cm Model 765 mm 102 mm
42 | English
Warming Drawers
Wolf warming drawers are designed to take care of pre-pared foods until it is time to serve them. You can adjust the temperature, keeping moist foods moist and crisp foods crisp. Warming drawers are ideal for proofing dough. Drawer fronts are available to match the look of Wolf ovens and sealed burner rangetops. The integrated drawer front allows for a custom panel and handle.
WARMING DRAWERS
TRANSITIONAL
CONTEMPORARY
PROFESSIONAL
CUSTOM PANEL
WARMING DRAWER FRONTS
M / E SERIES
INTEGRATED
wolfappliance.com | 43
578 mm
718 mm
229mm
264mm
A
BWWIDTH
546mm
OPEN DRAWER
DIMENSIONS
WARMING DRAWERS
Warming Drawers
DRAWER FRONT OPTIONS
Wolf warming drawer fronts allow for many design options, but the warming drawer itself will be the same for all appli-cations. A panel mounting kit is required when installing a custom panel. The panel mounting kit is available through an authorized Wolf dealer.
The 51 mm thick drawer front, in 76 cm and 91 cm widths, is designed to be installed below a sealed burner rangetop, so the panel aligns properly with the front of the rangetop. Dimensions for the warming drawer remain the same, even though the drawer front may be wider to match a Wolf 91 cm oven or sealed burner rangetop.
DRAWER FRONT
MODEL W
76 cm Drawer Front 759 mm91 cm Drawer Front 911 mm
M SERIES A B
Transitional / Professional 22 mm 83 mmContemporary 25 mm 86 mm
E SERIES A B
Transitional / Professional 29 mm 89 mmProfessional (51 mm thick) 54 mm 114 mmContemporary 35 mm 95 mm
INTEGRATED DRAWER FRONT
CUSTOM PANEL W H D
Typical Dimensions 759 mm 264 mm 19 mmMin Thickness 16 mm
44 | English
WARMING DRAWERS
Planning Information
The warming drawer must be installed with a Wolf drawer front, avail able through an authorized Wolf dealer. Specific installation instructions are included with the drawer front.
The warming drawer can be installed in a standard or flush inset application.
For a standard installation, the drawer collar and front panel sit proud of the cabinet face frame. A recessed installation requires the cabinetry be recessed by 5 mm so the collar is flush with the cabinet face frame but the drawer front will sit proud. A flush inset installation requires the drawer collar and front panel be recessed to be flush with sur-rounding cabinetry. Refer to the illustrations on the following pages for minimum cabinet dimensions for your specific installation.
Finish the edges of the opening. They may be visible when the drawer is open.
For standard installations, the face trim will overlap stiles and rails. Refer to the chart below.
For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT MIN
Warming Drawer 90 kg
TRIM OVERLAP
Top, Bottom and Sides 16 mm
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply flush with the back wall and within the shaded area shown in the illustrations on the following pages. For ease of installation, the electrical supply for the warming drawer can be placed in an adjacent cabinet within reach of the power cord.
ELECTRICAL REQUIREMENTS
Electrical Supply 220-240 V AC, 50/60 Hz
Service 850 W
Receptacle grounding-type (earthed)
Power Cord .9 m
wolfappliance.com | 45
WARMING DRAWERS
Warming Drawer
STANDARD INSTALLATION
FRONT VIEWSIDE VIEW
TOP VIEW
NOTE: Location of electrical supply within opening may require additional cabinet depth.
584 mmOPENING
DEPTH
E
727 mmOPENING WIDTH
232 mmOPENINGHEIGHT
ANTI-TIP BLOCK
46 | English
Warming Drawer
FLUSH INSET INSTALLATION
FRONT VIEWSIDE VIEW
TOP VIEW
*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth.
610 mmFLUSH INSET
DEPTH
ADRAWERFRONTDEPTH
270 mmFLUSH INSET
HEIGHT**
765 mmFLUSH INSET WIDTH**
19 mm
19 mm
19 mm E
E
FINISHEDCLEATS*
ANTI-TIP BLOCK
WARMING DRAWERS
DRAWER FRONT DEPTH (A) M SERIES E SERIES
Transitional / Professional 22 mm 29 mm
Professional (51 mm thick) NA 54 mm
Contemporary 25 mm 35 mm
Custom front panel depth is dependent on panel thickness.
wolfappliance.com | 47
INDUCTION COOKTOPS
Induction Cooktops
Almost instantaneous temperature response. Practically no wasted heat. Induction cooking has been popular among European chefs and homeowners for decades. Now Wolf leads the way in bringing this remarkable technology to North American kitchens. Its secret is magnetism. Electro-magnetic elements cause iron and magnetic stainless cook-ware to heat up instantly and with perfectly distributed heat. Heat generation stops the instant you turn off the element or remove the pan. The cooktop’s surface remains cool. Your kitchen stays cooler too. Transitional models have a brushed stainless steel trim. Contemporary models can be mounted flush with the countertop.
The following models have the same stainless steel frame as our module cooktops for paired installations: ICBCI243TF/S, ICBCI304TF/S, and ICBCI365TF/S.
ICBCI365C/B
ICBCI365TF/S
ICBCI304C/B
ICBCI243TF/S
INDUCTION COOKTOPS
TRANSITIONAL
CONTEMPORARY
ICBCI243C/B
ICBCI304TF/S
48 | English
Induction Cooktops
60 cm TRANSITIONAL
INDUCTION COOKTOPS
914 mm
533mm
64 mmCONDUIT
32 mm22mm
91 cm CONTEMPORARY
762 mm
533mm
64 mmCONDUIT
32 mm22mm
76 cm CONTEMPORARY
51 mmCONDUIT
32 mm22mm
600 mm
533mm
600 mm
533mm
64 mmCONDUIT
32 mm22mm
60 cm CONTEMPORARY
91 cm TRANSITIONAL
914 mm
533mm
51 mmCONDUIT
32 mm22mm
762 mm
533mm
51 mmCONDUIT
32 mm22mm
76 cm TRANSITIONAL
wolfappliance.com | 49
INDUCTION COOKTOPS
Planning Information
A minimum height clearance of 159 mm is required from the top of the countertop to any combustible surface directly below the cooktop.
Contemporary induction cooktops can be mounted flush with the top of the countertop, or as a frameless standard installation sitting on top of the countertop surface. If the cooktop is to be mounted flush with the countertop, a recessed area surrounding the cooktop cutout must be provided.
IMPORTANT NOTE: Flush mount installations are intended for granite, solid surface, or stone countertop surfaces only.
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply as shown in the illustrations on the following pages. A separate circuit servicing only this appliance is required.
Performance may be compromised if the electrical supply is less than 220 volts.
The cooktop is supplied with a single phase and 3-phase convertible power inlet box.
ELECTRICAL REQUIREMENTS
INDUCTION COOKTOPS SINGLE PHASE 3-PHASE
Required Power Supply 220-240 V AC 50/60 Hz
380-415 V AC 50 Hz
TOTAL AMPS SINGLE PHASE 3-PHASE
60 cm Induction 30 1676 cm Induction 32 1691 cm Induction 48 16
Induction Cooktops
ELEMENT RATING
60 cm COOKTOP W
279 mm 2600 / 3150 boost203 mm 2100 / 3000 boost203 mm 2100
76 cm COOKTOP W
279 mm 2600 / 3150 boost203 mm 2100 / 3000 boost203 mm 2100152 mm 1400
91 cm COOKTOP W
279 mm 2600 / 3700 boost(2) 203 mm 2100 / 3000 boost(2) 203 mm 2100
50 | English
INDUCTION COOKTOPS
E
COUNTERTOP CUTOUT
254 mm
114 mm
89 mm
FRONT VIEWSIDE VIEW
NOTE: Shaded area above countertop indicates minimum clearance to combustible surfaces,combustible materials cannot be located within this area.Electrical supply location only applies to installations with built-in oven.
762mm
330mm
457mm
51mm
WWIDTH
495mm
64 mm
64 mm
914 mm minFLOOR TO
COUNTERTOP
CUTOUT WIDTH W
60 cm Cooktop 562 mm
76 cm Cooktop 737 mm
91 cm Cooktop 889 mm
60 cm / 76 cm / 91 cm Induction Cooktop
STANDARD INSTALLATION
wolfappliance.com | 51
INDUCTION COOKTOPS
60 cm / 76 cm / 91 cm Induction Cooktop
FLUSH INSTALLATION
E
ARECESS
537 mmRECESS
40 mm min
WCUTOUT WIDTH
COUNTERTOP CUTOUT
495mm
64 mm
64 mm
254 mm
114 mm
89 mm
FRONT VIEWSIDE VIEW
NOTE: Shaded area above countertop indicates minimum clearance to combustible surfaces,combustible materials cannot be located within this area.Electrical supply location only applies to installations with built-in oven.Outside corner radius 11 mm.
762mm
330mm
457mm
51mm
8 mm
22mm MAX
COUNTERTOPPROFILE
914 mm minFLOOR TO
COUNTERTOP
CUTOUT WIDTH W A
60 cm Cooktop 562 mm 603 mm
76 cm Cooktop 737 mm 765 mm
91 cm Cooktop 889 mm 918 mm
52 | English
Gas Cooktops
Like their oven counterparts, the new generation of Wolf gas cooktops features two new looks—transitional and profes-sional. New performance enhancements make delicious results even more of a certainty than ever. Multiple sizes, choice of knob colors, and distinctly different grates—the new gas cooktops offer exceptional design flexibility.
GAS COOKTOPS
ICBCG365P/S
ICBCG304P/S
ICBCG365T/S
ICBCG304T/S
GAS COOKTOPS
TRANSITIONAL
PROFESSIONAL
wolfappliance.com | 53
762 mm
533mm
22mm
102 mm
Gas Cooktops
76 cm TRANSITIONAL
914 mm
533mm
22mm
102 mm
91 cm TRANSITIONAL
762 mm
533mm
22 mm
102 mm
76 cm PROFESSIONAL
914 mm
22 mm
102 mm
533mm
91 cm PROFESSIONAL
BURNER RATING
76 cm COOKTOP kW
Large 5.3Medium 3.5(2) Small 2.7
91 cm COOKTOP kW
Large 5.3Medium 3.5(3) Small 2.7
GAS COOKTOPS
54 | English
GAS COOKTOPS
Planning Information
A minimum 51 mm is required from the bottom of the cooktop to combustible materials. If a cooktop is installed above an oven, a minimum of 6 mm is required between the units.
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply as shown in the illustration on the following pages. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
ELECTRICAL REQUIREMENTS
Electrical Supply 220-240 V AC, 50/60 Hz
Service 0.2 A
Receptacle grounding-type (earthed)
Power Cord 1.8 m
GAS SUPPLY
Installation must conform with all applicable gas codes.
A gas supply line of 19 mm rigid pipe must be provided to the cooktop. If local codes permit, a certified, .9 m long, 13 mm or 19 mm ID flexible metal appliance connector is recommended to connect the units 1/2" NPT (or ISO 7/1-14) male inlet to the gas supply line.
The gas cooktops contain a regulator for natural gas and LP gas.
Wolf natural gas cooktops will function up to 3124 m in alti-tude without adjustment and LP gas cooktops will function up to 2621 m. If the installation exceeds these elevations, contact an authorized Wolf dealer for a high altitude conver-sion kit.
GAS REQUIREMENTS
NATURAL GAS WC
Supply Pressure 12.5 mbar
LP GAS WC
Supply Pressure 25 mbar
wolfappliance.com | 55
GAS COOKTOPS
76 cm / 91 cm Cooktop
STANDARD INSTALLATION
254 mm
102 mm
89 mm
FRONT VIEWSIDE VIEW
COUNTERTOP CUTOUT
NOTE: Shaded area above countertop indicates minimum clearance to combustible surfaces,combustible materials cannot be located within this area.Electrical and gas supply location only applies to installations with built-in oven.
762mm
WWIDTH
330mm
457mm
229mm
495mm
64 mm
64 mm
E G
CUTOUT WIDTH W
76 cm Cooktop 737 mm
91 cm Cooktop 889 mm
56 | English
MODULE COOKTOPS
Module Cooktops
Wolf 38 cm modules have been redesigned to match the updated lines of Sub-Zero and Wolf. Controls, grates, and trim allow them to integrate perfectly with their larger coun-terparts and deliver equal performance. Combine modules à la carte-style to create a custom cooktop, or add specialty functions alongside an existing cooktop.
Full-size cooktops including ICBCI243TF/S, ICBCI304TF/S, and ICBCI365TF/S feature the same brushed stainless frame, making them ideal for pairing with modules.
MODULE COOKTOPS
ICBSM15TF/S STEAMER
ICBCI152TF/S INDUCTION
ICBCG152TF/S GAS
ICBTM15TF/S TEPPANYAKI
ICBGM15TF/S GRILL
ICBMM15TF/S MULTIFUNCTION
wolfappliance.com | 57
MODULE COOKTOPS
22 mm
127 mm
381mm
533mm
381mm
533mm
22 mm
51 mm
381mm
533mm
222mm
22mm
102mm
DRAINOUTLET
Module Cooktops
INDUCTION GRILL TEPPANYAKI
381mm
533mm
22mm
127mm
32mm
MULTIFUNCTION
381 mm
533mm
32mm
CONDUIT
22mm
51 mm
381mm
533mm
22 mm
102 mm
GAS
STEAMER
58 | English
MODULE COOKTOPS
Planning Information
IMPORTANT NOTE: Wolf does not recommend the use of downdraft ventilation with the steamer or grill modules.
A minimum 51 mm is required from the bottom of the module to combustible materials. For the teppanyaki module, a minimum 22 mm is required from the bottom of the unit to any material.
Refer to the illustrations on the following pages for installa-tion of modules.
MULTIPLE COOKTOPS
When multiple modules are installed side by side, refer to the chart and illustration below for typical configurations. The cutout dimensions provided will accommodate the use of an optional filler strip if desired.
COUNTERTOP CUTOUT W
(2) 38 cm Modules* 737 mm
(3) 38 cm Modules* 1118 mm
(4) 38 cm Modules* 1505 mm
(5) 38 cm Modules* 1886 mm
(6) 38 cm Modules* 2267 mm
60 cm Cooktop / 38 cm Module* 956 mm
76 cm Cooktop / 38 cm Module* 1118 mm
76 cm Cooktop / (2) 38 cm Module* 1473 mm
91 cm Cooktop / 38 cm Module* 1270 mm
*Dimensions apply to ICBCI152TF/S, ICBCE152TF/S, ICBCG152TF/S, ICBSM15TF/S, ICBGM15TF/S, ICBTM15TF/S and ICBMM15TF/S.
64 mmMIN
495 mmCUTOUTDEPTH
WCUTOUT WIDTH
FRONT OF COUNTERTOP
64 mmMIN
Countertop cutout
wolfappliance.com | 59
MODULE COOKTOPS
Planning Information
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply as shown in the illustrations on the following pages. A separate circuit servicing only this appliance is required.
The induction cooktop is supplied with a single phase and 3-phase convertible power inlet box.
When multiple cooktops or modules are installed side by side, each must have its own separate electrical supply.
ELECTRICAL REQUIREMENTS
INDUCTION MODULE
Single Phase 220-240 VAC, 50/60 Hz3-Phase 380-415 V AC 50 HzTotal Amps 16
ELECTRIC MODULES
Electrical Supply 220-240 VAC, 50/60 HzSteamer, Teppanyaki 2700 WGrill 2800 W
GAS MODULES
Electrical Supply 220-240 VAC; 50/60 HzService 0.2 AReceptacle grounding-type (earthed)Power Cord 1.8 m
DRAIN OUTLET
The steamer module requires a method for draining hot water. Options include connecting a drain hose from the 16 mm outlet tied into an existing drain, a separate drain with freefall, or placing a heat-resistant receptacle under the drain outlet.
GAS SUPPLY
Installation must conform with all applicable gas codes.
For gas modules, a gas supply line of 19 mm rigid pipe must be provided to the module. If local codes permit, a certi-fied, .9 m long, 13 mm or 19 mm ID flexible metal appliance connector is recommended to connect the units 1/2" NPT (or ISO 7/1-14) male inlet to the gas supply line.
When multiple gas cooktops or modules are installed side by side, they can receive their gas supply from a common line. However, each unit must have its own regulator installed between the mainline and the cooktop or module.
Wolf natural gas cooktops will function up to 3124 m in alti-tude without adjustment and LP gas cooktops will function up to 2621 m. If the installation exceeds these elevations, contact an authorized Wolf dealer for a high altitude conver-sion kit.
GAS REQUIREMENTS
NATURAL GAS WC
Supply Pressure 25 mbar
LP GAS WC
Supply Pressure 37 mbar
60 | English
Induction Module
STANDARD INSTALLATION
356mm
495mm
64 mm
64 mm
FRONT VIEWSIDE VIEW
COUNTERTOP CUTOUT
NOTE: Shaded area above countertop indicates minimum clearance to combustible surfaces,combustible materials cannot be located within this area.
330mm
457mm
E
762mm
51mm
914 mm minFLOOR TO
COUNTERTOP
MODULE COOKTOPS
wolfappliance.com | 61
Steamer Module
STANDARD INSTALLATION
NOTE: Shaded area above countertop indicates minimum clearance to combustible surfaces,combustible materials cannot be located within this area.
FRONT VIEWSIDE VIEW
COUNTERTOP CUTOUT
330mm
457mm
E
762mm
200mm
152mm314
mm
DRAINOUTLET
495mm
64 mm MIN
64 mm MIN
356mm
178mm
MODULE COOKTOPS
62 | English
MODULE COOKTOPS
Grill / Teppanyaki Module
STANDARD INSTALLATION
495mm
64 mm MIN
64 mm MIN
FRONT VIEWSIDE VIEW
COUNTERTOP CUTOUT
NOTE: Shaded area above countertop indicates minimum clearance to combustible surfaces,combustible materials cannot be located within this area.
330mm
457mm
178mm
762mm
E
356mm
wolfappliance.com | 63
Gas / Multifunction Module
STANDARD INSTALLATION
MODULE COOKTOPS
FRONT VIEWSIDE VIEW
COUNTERTOP CUTOUT
NOTE: Shaded area above countertop indicates minimum clearance to combustible surfaces,combustible materials cannot be located within this area.
330mm
457mm
E G
762mm
356mm
495mm
64 mm MIN
64 mm MIN
178mm
64 | English
COFFEE SYSTEMS
Coffee Systems
Make professional-quality coffee, espresso, cappuccino, latte, and more. The Wolf coffee system automatically steams and foams the milk perfectly. The water temperature and brew strength are adjustable. It uses either whole-bean or ground coffee. The design pairs beautifully, either side-by-side or in a tower application, with other Wolf products such as the convection steam oven. Coffee systems can be installed in a standard or flush inset application. All 76 cm trim options are based on model ICBEC24/B.
COFFEE SYSTEMS
60 cm MODELS
76 cm E SERIES TRIM
76 cm M SERIES TRIM
TRANSITIONAL
ICBEC24/S
PROFESSIONAL
CONTEMPORARY
76 cm E SERIES TRIM
76 cm M SERIES TRIM
76 cm M / E SERIES TRIM
ICBEC24/B
wolfappliance.com | 65
COFFEE SYSTEMS
454mm
22 mm
UNITFULL EXTENSION
464mm
WWIDTH
457 mmBEHIND FRAME
WIDTH W
60 cm Model 597 mm
76 cm Trim 759 mm
Coffee System
DIMENSIONS
66 | English
COFFEE SYSTEMS
Planning Information
The coffee system can be installed in a standard or flush inset application. All 76 cm trim options are based on model ICBEC24/B. The sides of the cabinetry opening must be adequate to support installation of the mounting slides. Refer to the illustration below.
Finish the edges of the opening. They may be visible when the unit is slid forward.
For standard installations, the face trim will overlap stiles and rails. Refer to the chart below.
For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT MIN
Coffee System 45 kg
TRIM OVERLAP 60 cm MODEL 76 cm TRIM
Top 5 mm 5 mmBottom 0 mm 0 mmSides 18 mm 98 mm
COMBINATION INSTALLATION
To install a coffee system above a cup warming drawer, one opening for both units must be specified. To achieve the minimum reveal between units, place the coffee system support rails on top of the cup warming drawer, then secure the rails to the sides of the cabinet. Any material between the units will increase the horizontal reveal.
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply as shown in the illustrations on the following pages. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
ELECTRICAL REQUIREMENTS
Electrical Supply 220-240 V AC, 50/60 Hz
Service 1350 W
Receptacle grounding-type (earthed)
Power Cord 1.8 m
356mm
254mm
19 mmTYPICAL
Side support
wolfappliance.com | 67
SLIDESUPPORT
FRONT VIEWSIDE VIEW
TOP VIEW
E449 mmOPENINGHEIGHT
WOPENING WIDTH
SLIDESUPPORT
NOTE: 60 cm model and model with 76 cm trim require the same opening dimensions.
457 mmOPENING
DEPTH
Coffee System
STANDARD INSTALLATION
OPENING WIDTH W
60 cm Model 562 mm
76 cm Trim 562 mm
COFFEE SYSTEMS
68 | English
*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.***Does not include additional depth for the electrical connection.
WFLUSH INSET WIDTH**
FRONT VIEWSIDE VIEW
FINISHEDCLEATS*
482 mmFLUSHINSET
DEPTH***25 mm
460 mm FLUSH INSET
HEIGHT**
8 mm
3 mm
A
TOP VIEW
E
SLIDESUPPORT
SLIDESUPPORT
Coffee System
FLUSH INSET INSTALLATION
FLUSH INSET WIDTH W A
60 cm Model 603 mm 21 mm
76 cm Trim 765 mm 102 mm
COFFEE SYSTEMS
wolfappliance.com | 69
Cup Warming Drawers
Wolf cup warming drawers preheat cups so hot beverages stay hot longer. The temperature is adjustable. Two model options match the look of Wolf stainless and black coffee systems. Cup warming drawers can be installed in a stan-dard or flush inset application.
CUP WARMING DRAWERS
CUP WARMING DRAWER
533 mmBEHIND FRAME
140mm
22mm
DRAWERFULL EXTENSION
483mm
597 mm
DIMENSIONS
ICBCW24/B BLACK
ICBCW24/S STAINLESS
70 | English
CUP WARMING DRAWER
Planning Information
The cup warming drawer can be installed in a standard or flush inset application. Finish the edges of the opening. They may be visible when the drawer is open.
For standard installations, the face trim will overlap stiles and rails. Refer to the chart below.
For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
An anti-tip block must be installed to prevent the cup warming drawer from tipping forward when opened.
INSTALLATION REQUIREMENTS
BASE SUPPORT MIN
Cup Warming Drawer 34 kg
TRIM OVERLAP
Top 0 mmBottom 0 mmSides 18 mm
COMBINATION INSTALLATION
To install a cup warming drawer below a coffee system, one opening for both units must be specified. To achieve the minimum reveal between units, place the coffee system support rails on top of the cup warming drawer, then secure the rails to the sides of the cabinet. Any material between the units will increase the horizontal reveal.
Installation of an anti-tip block is not necessary when the cup warming drawer is installed below a coffee system.
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply as shown in the illustrations on the following pages. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
ELECTRICAL REQUIREMENTS
Electrical Supply 220-240 V AC, 50/60 Hz
Service 550 W
Receptacle grounding-type (earthed)
Power Cord .9 m
wolfappliance.com | 71
Cup Warming Drawer
STANDARD INSTALLATION
FRONT VIEWSIDE VIEW
TOP VIEW
140 mmOPENING HEIGHT
533 mmOPENING
DEPTH
E
562 mmOPENING WIDTH
ANTI-TIP BLOCK
CUP WARMING DRAWER
72 | English
Cup Warming Drawer
FLUSH INSET INSTALLATION
*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.***Does not include additional depth for the electrical connection.
FRONT VIEWSIDE VIEW
FINISHEDCLEATS*
558 mmFLUSHINSET
DEPTH***25 mm
3 mm
3 mm
TOP VIEW
146 mm FLUSH INSET HEIGHT**
21mm E
603 mmFLUSH INSET WIDTH**
ANTI-TIP BLOCK
CUP WARMING DRAWER
wolfappliance.com | 73
Vacuum Seal Drawer
The vacuum seal drawer can be installed in a standard or flush inset application. Stainless steel, black glass, and integrated drawer fronts are available in 61 cm and 76 cm widths. The integrated drawer front allows for a custom panel.
DRAWER FRONTS
VACUUM SEAL DRAWER
INTEGRATED
BLACK GLASS
STAINLESS STEEL
533 mmBEHIND FRAME
140mm
DRAWERFULL
EXTENSION
432mm
597 mm 22mm
DIMENSIONS
DRAWER FRONT W
61 cm Drawer Front 597 mm
76 cm Drawer Front 759 mm
140mm
W
DRAWER FRONT DIMENSIONS
74 | English
VACUUM SEAL DRAWER
Planning Information
The vacuum seal drawer can be installed in a standard or flush inset application. Finish the edges of the opening. They may be visible when the drawer is open.
For standard installations, the face trim will overlap stiles and rails. Refer to the chart below.
For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT MIN
Vacuum Seal Drawer 34 kg
TRIM OVERLAP
Top 0 mmBottom 0 mmSides 18 mm
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply as shown in the illustrations on the following pages. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
ELECTRICAL REQUIREMENTS
Electrical Supply 220–240 V AC, 50/60 Hz
Service 320 W
Receptacle grounding-type (earthed)
Power Cord .9 m
wolfappliance.com | 75
Vacuum Seal Drawer
STANDARD INSTALLATION
FRONT VIEWSIDE VIEW
TOP VIEW
141 mmOPENING HEIGHT
E
562 mmOPENING WIDTH
ANTI-TIP BLOCK
533 mmOPENING
DEPTH
VACUUM SEAL DRAWER
76 | English
*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.***Does not include additional depth for the electrical connection.
FRONT VIEWSIDE VIEW
22 mm
2 mm
3 mm
TOP VIEW
146 mm FLUSH INSET HEIGHT**
E
ANTI-TIP BLOCK
FINISHEDCLEATS*
WFLUSH INSET WIDTH**
A
558 mmFLUSHINSET
DEPTH***
Vacuum Seal Drawer
FLUSH INSET INSTALLATION
FLUSH INSET WIDTH W A
610 mm Opening 603 mm 21 mm
762 mm Opening 765 mm 102 mm
VACUUM SEAL DRAWER
wolfappliance.com | 77
Dual Fuel Ranges
Discover a new world of cooking—the best of two worlds, actually—with a Wolf dual fuel range. Topside, gas cooking in all its glory, with the fine control of dual-stacked, sealed burners and options that include the remarkable French top. Below, that marvel of culinary technology, the Wolf convec-tion electric oven. Its two fans and four heating elements let you select from 10 cooking modes so you can choose the one precisely suited to the dish you are preparing. The ovens are self-cleaning. With a variety of range widths to choose from, kitchens large and small become gateways to the exciting new world of dual fuel cooking. All models are constructed of stainless steel and can be ordered in natural or LP gas.
DUAL FUEL RANGES
CONFIGURATIONS
91 cm RANGE
ICBDF366
ICBDF364C
ICBDF364G
ICBDF304
76 cm RANGE
ICBDF606CG
ICBDF604CF
152 cm RANGE
ICBDF486C
ICBDF486G
ICBDF484CG
ICBDF484F
122 cm RANGE
78 | English
Dual Fuel Ranges
76 cm RANGE 91 cm RANGE
DUAL FUEL RANGES
122 cm RANGE
1527 mm
235mm
937 mm*
1165 mm
1419 mm
1038 mm
1194 mm
664 mm
635 mm
613 mm
699 mm
749 mm
*929 mm MIN TO 983 mm MAX.
911mm
929 mm*
152 cm RANGE
759 mm
235mm
937 mm*
1165 mm
1419 mm
1038 mm
1194 mm
664 mm
635 mm
613 mm
699 mm
749 mm
*929 mm MIN TO 983 mm MAX.
911mm
929 mm*
911 mm
235mm
937 mm*
1165 mm
1419 mm
1038 mm
1194 mm
664 mm
635 mm
613 mm
699 mm
749 mm
*929 mm MIN TO 983 mm MAX.
911mm
929 mm*
1216 mm
235mm
937 mm*
1165 mm
1419 mm
1038 mm
47" (1194)
664 mm
635 mm
613 mm
699 mm
749 mm
*929 mm MIN TO 983 mm MAX.
911mm
929 mm*
SIDE VIEW—ALL RANGES
wolfappliance.com | 79
DUAL FUEL RANGES
Dual Fuel Ranges
BURNER RATING
SURFACE BURNER SIM HI
Large .3 kW 4.8 kW
Small .1 kW 2.7 kW
FEATURE NATURAL LP
Charbroiler 5.6 kW 5.2 kW
Griddle 5.6 kW 5.2 kW
French Top 4.8 kW 4.0 kW
80 | English
Planning Information
When installing against a combustible surface, a minimum 254 mm riser is required for a 91 cm dual fuel range with charbroiler or griddle and all 122 cm and 152 cm models. Follow all minimum clearances to combustible surfaces shown in the illustration on the following page.
A Wolf pro ventilation hood is recommended with the dual fuel range. Refer to page 113 for Pro Ventilation.
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply flush with the wall or floor and within the shaded area shown in the illustration on the fol-lowing page. A separate circuit servicing only this appliance is required.
Wolf dual fuel ranges have a terminal block that allows for a 3-wire or 4-wire installation.
Performance may be compromised if the electrical supply is less than 220 volts.
The range is supplied with a single phase and 3-phase convertible power inlet box. The wiring diagram covering the control circuit is provided with the oven.
REQUIRED POWER SUPPLY
Single phase 220-240 V AC, 50/60 Hz
3phase 380-415 V AC, 50 Hz
MAXIMUM CONNECTED LOAD
DUAL FUEL RANGES SINGLE PHASE 3PHASE
762 mm and 914 mm 19 amps 18 amps1219 mm 35 amps 18 amps1524 mm 38 amps 18 amps
GAS SUPPLY
Installation must conform with all applicable gas codes.
A gas supply line of 19 mm rigid pipe must be provided to the range. If local codes permit, a certified, .9 m long, 13 mm or 19 mm ID flexible metal appliance connector is recommended to connect the units ISO 7/1-14 female inlet to the gas supply line.
Wolf natural gas ranges will function up to 3124 m in altitude without adjustment and LP gas ranges will function up to 2621 m. If the installation exceeds these elevations, contact an authorized Wolf dealer for a high altitude conversion kit.
GAS REQUIREMENTS
NATURAL GAS WC
Supply Pressure 25 mbar
LP GAS WC
Supply Pressure 37 mbar
DUAL FUEL RANGES
wolfappliance.com | 81
DUAL FUEL RANGES
Dual Fuel Range
INSTALLATION
FRONT VIEWSIDE VIEW
*Without ventilation hood, 914 mm minimum clearance countertop to combustible materials, 1118 mm for charbroiler.
NOTE: Shaded area above countertop indicates minimum clearance to combustible surfaces,combustible materials cannot be located within this area.For island installation, 305 mm minimum clearance back of range to combustible rear wall above countertop.
330mm
457mm
152mm
57mm
LOCATION OF GAS AND ELECTRICAL EXTENDS
ON FLOORA
83 mm
254 mmGAS
330 mmELECTRICAL
937 mmTO COOKING
SURFACE
WOPENING WIDTH
762 mm TO 914 mmTO BOTTOM OF
VENTILATION HOOD*
G E
OPENING WIDTH W A
76 cm Model 762 mm 216 mm
91 cm Model 914 mm 343 mm
122 cm Model 1219 mm 610 mm
152 cm Model 1530 mm 787 mm
82 | English
SEALED BURNER RANGETOPS
Sealed Burner Rangetops
Wolf sealed burner rangetops incorporate all the gas cooking features of a Wolf dual fuel range. Customize your rangetop with your preferred combination of burners (from four to six), infrared griddle or charbroiler, or the remarkable French top. Compared with conventional electric elements, the infrared elements of the charbroiler and griddle are a revelation. They preheat almost instantly, distribute heat more evenly, and deliver fast temperature recovery after food is placed on the surface. All sealed burner rangetop models are constructed of stainless steel and can be ordered in natural or LP gas.
CONFIGURATIONS
ICBSRT486C
ICBSRT364C
ICBSRT486G
ICBSRT364G
ICBSRT484CG
ICBSRT484F
91 cm RANGETOP76 cm RANGETOP 122 cm RANGETOP
ICBSRT304
wolfappliance.com | 83
1216 mm
235mm 445 mm
699 mm
318 mm
664 mm
724 mm
208mm
191mm 613 mm 216
mm
Sealed Burner Rangetops
76 cm RANGETOP
122 cm RANGETOP
SIDE VIEW—ALL RANGETOPS
SEALED BURNER RANGETOPS
759 mm
235mm 445 mm
699 mm
318 mm
664 mm
724 mm
208mm
191mm 613 mm 216
mm
91 cm RANGETOP
911 mm
235mm 445 mm
699 mm
318 mm
664 mm
724 mm
208mm
191mm 613 mm 216
mm
BURNER RATING
SURFACE BURNER SIM HI
Large .9 kW 4.6 kWSmall .6 kW 2.8 kW
FEATURE NATURAL LP
Charbroiler 5.8 kW 5.3 kWGriddle 5.5 kW 4.7 kWFrench Top 4.6 kW 4.0 kW
84 | English
SEALED BURNER RANGETOPS
Planning Information
The platform to support the sealed burner rangetop must include a cutout for electrical and gas supply connections. Refer to the chart below for minimum base support.
When installing against a combustible surface, a minimum 254 mm riser is required for 91 cm and 122 cm sealed burner rangetops with a charbroiler or griddle. Follow all minimum clearances to combustible surfaces shown in the illustration on the following page.
A Wolf pro ventilation hood is recommended with the sealed burner rangetop. Refer to page 113 for Pro Ventilation.
A downdraft can be used with model ICBSRT304. An acces-sory trim kit is necessary for this installation. Contact an authorized Wolf dealer for details.
INSTALLATION REQUIREMENTS
PLATFORM
Thickness 19 mm
BASE SUPPORT MIN
76 cm Rangetop 91 kg91 cm Rangetop 113 kg122 cm Rangetop 136 kg
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply within the shaded area shown in the illustration on the following page. A separate circuit servicing only this appliance is required.
ELECTRICAL REQUIREMENTS
Electrical Supply grounded, 220-240 VAC; 50/60 Hz
Service 0.2 A
Receptacle grounding-type (earthed)
Power Cord 2 m
GAS SUPPLY
Installation must conform with all applicable gas codes.
A gas supply line of 19 mm rigid pipe must be provided to the rangetop. If local codes permit, a certified, .9 m long, 13 mm or 19 mm ID flexible metal appliance connector is recommended to connect the units ISO 7/1-14 female inlet to the gas supply line.
Wolf natural gas rangetops will function up to 3124 m in altitude without adjustment and LP gas ranges will function up to 2621 m. If the installation exceeds these elevations, contact an authorized Wolf dealer for a high altitude conver-sion kit.
GAS REQUIREMENTS
NATURAL GAS WC
Supply Pressure 25 mbar
LP GAS WC
Supply Pressure 37 mbar
wolfappliance.com | 85
FRONT VIEWSIDE VIEW
330mm
457mm
152mm
WOPENING WIDTH
610 mm MAXPLATFORM
762 mm TO 914 mmTO BOTTOM OF
VENTILATION HOOD*
191 mm OPENINGHEIGHT
PLATFORMPLATFORMTOP VIEW
406 mmELECTRICAL
AND GAS
102mm
E G
BACK WALL
*Without ventilation hood, 914 mm minimum clearance countertop to combustible materials, 1118 mm for charbroiler.
NOTE: Shaded area above countertop indicates minimum clearance to combustible surfaces,combustible materials cannot be located within this area.Electrical and gas supply located through bottom of platform.For island installation, 305 mm minimum clearance back of range to combustible rear wall above countertop.
Sealed Burner Rangetop
INSTALLATION
OPENING WIDTH W
76 cm Model 762 mm
91 cm Model 914 mm
122 cm Model 1219 mm
SEALED BURNER RANGETOPS
86 | English
Outdoor Grills and Modules
Taste what happens when the heritage of professional cooking moves from the kitchen to the patio. Like their indoor counterparts, Wolf outdoor grills are precision instruments. Constructed of heavy-duty stainless steel, the 76 cm, 91 cm, 107 cm, and 137 cm grills have powerful burners every five inches for even heat distribution. An electric rotisserie with infrared burner produces succulent poultry and roasts. All grill models can be built in and all except the 137 cm grill, can be used on a cart for portable convenience. The 25,000 Btu burner module can be built into an outdoor kitchen and the side burner attached to a cart. Wolf grills and modules can be ordered in natural or LP gas.
OUTDOOR GRILLS | MODULES
OUTDOOR GRILLS
ICBOG30
ICBOG42
ICBOG36
ICBOG54
ICBBM13 BURNER MODULE
ICBSB13 SIDE BURNER
OUTDOOR MODULES
wolfappliance.com | 87
273 mm
762 mm
705 mm330mm
WWIDTH
MAX DOOR/DRAWER CLEARANCE 559 mm
610 mmTO GRILL
PLATFORM
927mm
705 mm
305mm
76 mm
762 mmHOOD CLOSED
318 mmTO
GRILLINGSURFACE
686mm
WWIDTH
705 mm
64mm
CLEARANCEFOR OPEN
HOOD
139mm
OUTDOOR GRILLS | MODULES
Outdoor Grills and Modules
OUTDOOR GRILL
GRILL CART
BURNER MODULE / SIDE BURNER OUTDOOR GRILL W
ICBOG30 762 mm
ICBOG36 914 mm
ICBOG42 1067 mm
ICBOG54 1372 mm
GRILL CART W
ICBCART30 762 mm
ICBCART36 914 mm
ICBCART42 1067 mm
88 | English
OUTDOOR GRILLS | MODULES
Outdoor Grills and Modules
BURNER RATING
GRILL BURNERS kW
ICBOG30, ICBOG36, ICBOG42, ICBBM13, ICBSB13 7.3ICBOG54 7.5
SEAR ZONE kW
ICBOG36, ICBOG42 7.3ICBOG54 7.5
ROTISSERIE kW
ICBOG30 4.1ICBOG36, ICBOG42 4.7ICBOG54 (2) 4.1
Planning Information
For portable applications, Wolf grill carts are designed specifically to fit grill models ICBOG30, ICBOG36, and ICBOG42 and the side burner. Model ICBOG54 is designed for built-in applications only.
For built-in applications, Wolf outdoor grills and the burner module are designed for easy placement into a built-in enclosure. For outdoor grills, installation in a combustible enclosure requires an insulating liner. For the burner module, an insulating liner is not required. The enclosure should be built according to specifications for your specific installa-tion on the following pages. If the burner module is installed next to an outdoor grill, a minimum of 305 mm is required between the units. A rotisserie side conversion kit is avail-able from an authorized Wolf dealer.
Optional stainless steel accessory doors and drawers are available for built-in applications. Refer to pages 92–96.
Grill carts, insulating liners, and stainless steel doors and drawers are avail able through an authorized Wolf dealer.
wolfappliance.com | 89
OUTDOOR GRILLS | MODULES
Planning Information
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
The electrical outlet must be located within reach of the power cord. A separate circuit servicing only this appliance is required.
IMPORTANT NOTE: A ground fault circuit interrupter (GFCI) or residual current device (RCD) is required to reduce the risk of electrical shock.
ELECTRICAL REQUIREMENTS (GRILL / MODULE)
Electrical Supply grounded, 220-240 VAC, 50/60 Hz
Service 1 A
Receptacle 3-prong grounding-type (earthed), IEC inlet
ELECTRICAL REQUIREMENTS (ROTISSERIE)
Electrical Supply—Input grounded, 220-240 VAC, 50/60 Hz
Electrical Supply—Output 12 VDC
Service 0.5 A (6 Watts)
Receptacle barrel plug, 2.1 mm ID x 5.5 mm OD
GAS SUPPLY
Installation must conform with all applicable gas codes.
A gas supply line of 19 mm rigid pipe must be provided to the outdoor grill or module. If local codes permit, a certified, .9 m long, 13 mm or 19 mm ID flexible metal appliance con-nector is recommended to connect the units ISO 7-1 female inlet to the gas supply line.
An inline regulator is installed on the unit for connecting to NAT or LP gas sources. For local dealer information, visit our website, wolfappliance.com.
If the outdoor grill is being connected to a whole house LP supply, the LP gas pressure regulator is not provided. It can be purchased from an authorized Wolf dealer.
GAS REQUIREMENTS
NATURAL GAS
Supply Pressure 12.5 mbarMin Line Pressure 17.5 mbarMax Regulator Pressure 100 mbar
LP GAS
Supply Pressure 25 mbarMin Line Pressure 27.4 mbarMax Regulator Pressure 100 mbar
90 | English
OUTDOOR GRILLS | MODULES
298mm
OPENINGHEIGHT
616 mmOPENING
DEPTH
152mm
GRILLOVERLAP
FRONT VIEW
TOP VIEW
WOPENING WIDTH
64 mm
330mm
89mm
G
102 mm
152mm
G
NOTE: Shaded area above countertop indicates minimum clearance tocombustible surfaces, combustible materials cannot be located within this area.
GRILLOPENING
21mm
COUNTERTOP OVERHANG
321mm
OPENINGHEIGHT
660 mmOPENING
DEPTH
305mm
273mm
127mm
CL
CL
70 mmKNOCKOUT
LINEROPENING
21mm
COUNTERTOP OVERHANG
LINEROVERLAP
FRONT VIEW
TOP VIEW
WOPENING WIDTH
NOTE: Shaded area above countertop indicates minimum clearance tocombustible surfaces, combustible materials cannot be located within this area.
305 mm
G
NON-COMBUSTIBLE ENCLOSURE W
ICBOG30 724 mm
ICBOG36 876 mm
ICBOG42 1029 mm
ICBOG54 1334 mm
For installation of the accessory doors and drawers, refer to Outdoor Accessories on the following pages.
Outdoor Grill
NON-COMBUSTIBLE INSTALLATION COMBUSTIBLE INSTALLATION
COMBUSTIBLE ENCLOSURE W
ICBOG30 851 mm
ICBOG36 1003 mm
ICBOG42 1156 mm
ICBOG54 1461 mm
wolfappliance.com | 91
OUTDOOR GRILLS | MODULES
254 mmOPENINGHEIGHT
616 mmOPENING
DEPTH
152mm
MODULEOPENING
14mm
COUNTERTOP OVERHANG
MODULEOVERLAP
FRONT VIEW
TOP VIEW
305 mmOPENING
NOTE: Shaded area above countertop indicates minimum clearance tocombustible surfaces, combustible materials cannot be located within this area.An insulating liner is not required.
G
203mm
178mm
G
76 mm
305 mm
Burner Module
INSTALLATION
92 | English
OUTDOOR ACCESSORIES
SINGLE
DOUBLE
SINGLE DRAWER
2- OR 3-DRAWER
DOOR/DRAWER
TALL DRY STORAGE
SHORT DRY STORAGE
PAPER TOWEL DRAWER
Outdoor Accessories
ACCESS DOORS
ACCESSORY DRAWERS AND DOORS
TRASH/RECYCLING DRAWER
wolfappliance.com | 93
70 mm
B
A
527mm
476mm
Access Doors
DIMENSIONS
DOOR WIDTH A B
46 cm Single 457 mm 413 mm
76 cm Double 762 mm 718 mm
91 cm Double 914 mm 870 mm
107 cm Double 1067 mm 1022 mm
137 cm Double 1372 mm 1327 mm
OPENING WIDTH W
46 cm Single 419 mm
76 cm Double 724 mm
91 cm Double 876 mm
107 cm Double 1029 mm
137 cm Double 1334 mm
IMPORTANT NOTE: The opening dimensions provided are for a standard installation. For a flush installation, refer to the overall dimensions and adjust the opening dimensions accordingly.
WOPENING WIDTH
483 mmOPENINGHEIGHT
25 mm minGRILL OPENING
FRONT VIEW
89 mmFINISHEDRETURN
W
TOP VIEW
INSTALLATION
OUTDOOR ACCESSORIES
94 | English
457mm
70 mm
330 mm
305 mm
527mm
483mm
OUTDOOR ACCESSORIES
610mm
70 mm
241mm
762 mm
686 mm
289mm
Accessory Drawers and Doors
SINGLE DRAWER
203 mm
483mm
70 mm
457 mm
368 mm
254mm
PAPER TOWEL DRAWER
DRAWER / DOOR
457mm
70 mm
483mm
762 mm
724 mm
527mm
2- OR 3-DRAWER
wolfappliance.com | 95
502mm
70 mm
610 mm
559 mm
864mm
813mm
OUTDOOR ACCESSORIES
TRASH / RECYCLE DRAWER
70 mm
457 mm
406 mm
660mm
610mm
D
DEPTH D
Single 495 mm
Double 572 mm
502mm
70 mm
914 mm
864 mm
527mm
476mm
SHORT DRY STORAGE
Accessory Drawers and Doors
TALL DRY STORAGE
96 | English
OUTDOOR ACCESSORIES
OPENING W H D
Single Drawer 692 mm 248 mm 616 mm
Paper Towel Drawer 375 mm 210 mm 489 mm
2- or 3-Drawer 311 mm 489 mm 464 mm
Drawer/Door 730 mm 489 mm 464 mm
Tall Dry Storage 565 mm 819 mm 508 mm
Short Dry Storage 870 mm 483 mm 508 mm
Single Trash/Recycle 413 mm 616 mm 502 mm
Double Trash/Recycle 413 mm 616 mm 578 mm
BASE SUPPORT MIN
2- or 3-Drawer 68 kg
Drawer/Door 68 kg
Dry Storage 136 kg
IMPORTANT NOTE: The opening dimensions provided are for a standard installation. For a flush installation, refer to the overall dimensions and adjust the opening dimensions accordingly.
DOPENING
DEPTH
FRONT VIEW
TOP VIEW
HOPENINGHEIGHT
25 mm min
89 mmFINISHEDRETURN
W
WOPENING WIDTH
Accessory Drawers and Doors
INSTALLATION
wolfappliance.com | 97
COOKTOP HOODS
ICBVW30B WALL
ICBVW36B WALL
ICBVW45B WALL
ICBVI42B ISLAND
ICBVW30S WALL
ICBVW36S WALL
ICBVI42S ISLAND
ICBVW36G WALL
ICBVW45G WALL
ICBVI45G ISLAND
COOKTOP VENTILATION HOODS
BLACK
STAINLESS
GLASS
Cooktop Ventilation Hoods
The new generation of Wolf cooktop ventilation hoods feature three new looks—black, stainless, and glass. Brilliant LED lighting illuminates your cooking surface while powerful multi-speed blowers whisk away smoke and odors. The dishwasher-safe filters can be removed easily for cleaning. The wall-mount and island hoods are crafted of stainless steel.
98 | English
COOKTOP HOODS
WWIDTH
489 mm
298 mm
540mm
260 mm
740 mm TO
997 mm*
57 mm
*1248 mm to 1505 mm with accessory flue extension.
Cooktop Ventilation Hoods
WALL HOODS—BLACK
1067 mm 673 mm
349 mm
600mm
286 mm
591 mm TO
813 mm*
57 mm
*1175 mm to 1397 mm with accessory flue extension.
ISLAND HOOD—BLACK
WIDTH W
ICBVW30B 762 mm
ICBVW36B 914 mm
ICBVW45B 1143 mm
wolfappliance.com | 99
COOKTOP HOODS
WWIDTH
559 mm
298 mm
540mm
152mm
260 mm
740 mm TO
997 mm*
*1248 mm to 1505 mm with accessory flue extension.
Cooktop Ventilation Hoods
WALL HOODS—STAINLESS
1067 mm 673 mm
349 mm
600mm
286 mm
152mm
591 mmTO
813 mm*
*1175 mm to 1397 mm with accessory flue extension.
ISLAND HOOD—STAINLESS
WIDTH W
ICBVW30S 762 mm
ICBVW36S 914 mm
100 | English
COOKTOP HOODS
WWIDTH
489 mm
298 mm
540mm
260 mm
740 mm TO
997 mm*
57 mm
*1248 mm to 1505 mm with accessory flue extension.
Cooktop Ventilation Hoods
WALL HOODS—GLASS
1143 mm 673 mm
349 mm
600mm
286 mm
591 mm TO
813 mm*
57 mm
*1175 mm to 1397 mm with accessory flue extension.
ISLAND HOOD—GLASS
WIDTH W
ICBVW36G 914 mm
ICBVW45G 1143 mm
wolfappliance.com | 101
COOKTOP HOODS
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
For wall hoods, locate the electrical supply within the shaded area shown in the illustration below. For island hoods, locate the electrical supply on the ceiling inside the top of the hood. A separate circuit servicing only this appli-ance is recommended.
ELECTRICAL REQUIREMENTS
Electrical Supply 220-240 V AC, 50 Hz 220 V AC, 60 Hz
Service 1.9 A
Planning Information
Wolf cooktop ventilation hoods are recommended for use with Wolf induction, electric, and gas cooktops, and mod-ules. For ranges and rangetops, a Wolf pro ventilation hood is recommended.
These hoods have a telescopic chimney flue. A flue exten-sion is available through an authorized Wolf dealer.
Installation of the cooktop hood should be 762 mm to 914 mm from the bottom of the hood to the countertop.
Wall and island hoods require an internal or remote blower assembly, avail able through an authorized Wolf dealer. Refer to Ventilation Suggestions on pages 117–119. Cooktop hoods have a vertical discharge with 152 mm round duct.
Consult a qualified HVAC professional for specific installa-tion and ducting applications.
Electrical location for all wall hoods
E
457mm
762 mm TO 914 mm BOTTOM EDGE TO COUNTERTOP
102 | English
Ceiling-Mounted Hood
The new ceiling-mounted hood is our most contemporary ventilation offering, nearly disappearing into its surround-ings. It comes in two widths and is available in stainless steel. The hood ships with a remote control and can be operated using the remote control or the control panel. The control panel is recessed into the right side of the hood. The dishwasher-safe filters can be removed easily for cleaning.
DIMENSIONS
COOKTOP VENTILATION
DIMENSIONS W A
914 mm Hood 902 mm 841 mm
1219 mm Hood 1200 mm 1121 mm
2 mmW
127 mm
533 mm
A337mm
184mm
337mm
184 mm TO
324 mm
ICBVC48S
ICBVC36S
CEILING-MOUNTED HOODS
wolfappliance.com | 103
RECIRCULATING INSTALLATION
The ceiling-mounted hood with internal blower can be installed in a recirculating application. The air discharge must be a minimum of 1016 mm from every side of the hood. Refer to the illustration below. The ductwork and vent cover are not provided. A recirculation kit, available through an authorized Wolf dealer, is required.
Planning Information
Installation of the ceiling-mounted hood should be 914 mm to 2134 mm from the bottom of the hood to the countertop.
The hood can be operated using the remote control or the control panel located on the right side of the hood.
The hood is shipped without a blower assembly. A 900 CMH internal blower is avail able through an authorized Wolf dealer. Refer to Ventilation Suggestions on pages 117–119.
The ceiling-mounted hood includes a 152 mm round discharge for the internal blower. The blower box can be rotated to discharge right, left, front, or rear.
Consult a qualified HVAC professional for specific installa-tion and ducting applications.
1016 mm
Recirculation application
COOKTOP VENTILATION
104 | English
Planning Information
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply within the shaded area shown in the illustration below. Allow a minimum 305 mm electrical cable for connection. A separate circuit servicing only this appliance is required.
ELECTRICAL REQUIREMENTS
Electrical Supply 220-240 V AC, 50 Hz 220 V AC, 60 Hz
Service 1.9 A
E
914 mm TO 2134 mm BOTTOM EDGE TO COUNTERTOP
Electrical location
Opening Dimensions
CEILING-MOUNTED HOOD
Refer to the chart and illustrations below for opening dimen-sions and typical framing. Framing must be able to support a minimum of 45 kg.
HOOD W
91 cm Hood 873 mm
122 cm Hood 1175 mm
314 mm MIN TO451 mm MAX
Support framing (typical)
W508mm
Opening dimensions
COOKTOP VENTILATION
wolfappliance.com | 105
Under-Cabinet Hood Insert
The new under-cabinet hood insert mounts inside a cabinet. It comes in two widths and is available in stainless steel. The hood ships with a remote control and can be operated using the remote control or the control panel. The dishwasher-safe filters can be removed easily for cleaning.
UNDER-CABINET HOOD INSERT
ICBVU30S
ICBVU24S
COOKTOP VENTILATION
DIMENSIONS
WIDTH W
ICBVU24S 521 mm
ICBVU30S 702 mm
W13mm
349mm
299 mm
106 | English
COOKTOP VENTILATION
Planning Information
The under-cabinet hood insert should be installed 610 mm to 914 mm from the bottom of the hood to the countertop.
The hood can be operated using the remote control or the control panel located at the front of the hood bottom.
The hood requires a 900 CMH internal blower, available through an authorized Wolf dealer. For local dealer information, visit our website, wolfappliance.com. Refer to Ventilation Suggestions on pages 117–119. The hood includes a 152 mm round discharge for the internal blower.
Consult a qualified HVAC professional for specific installa-tion and ducting applications.
HORIZONTALDISCHARGE
DISCHARGEABOVE CABINET
Recirculation application
RECIRCULATION APPLICATION
The hood can be installed in a recirculation application. Refer to the illustration below. Ductwork is not provided.
Recirculating filters, available through an authorized Wolf dealer, are required.
wolfappliance.com | 107
COOKTOP VENTILATION
Opening Dimensions
UNDER-CABINET HOOD INSERT
Refer to the chart and illustration below for opening dimen-sions. The cabinet must be able to support a minimum of 45 kg.
OPENING WIDTH W
ICBVU24S 495 mm
ICBVU30S 676 mm
Planning Information
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply above or in an adjacent cabinet within reach of the power cord. Refer to the illustration below. A separate circuit servicing only this appliance is required.
ELECTRICAL REQUIREMENTS
Electrical Supply 220-240 V AC, 50 Hz 220 V AC, 60 Hz
Service 1.9 A
Power Cord 1.2 m
EE
610 mm TO 914 mmBOTTOM EDGE TO
COUNTERTOP
Electrical location
W 260mm
Opening dimensions
108 | English
DOWNDRAFT SYSTEMS
Downdraft Ventilation
Constructed of heavy duty stainless steel, the Wolf down-draft rises from the countertop to whisk away odor and smoke into stainless steel, mesh filters and can be lowered beneath the countertop when not in use. Downdrafts inte-grate perfectly with Wolf induction cooktops, gas cooktops, and some modules. They can also be installed with certain sealed burner rangetops.
ICBDD45
ICBDD36
ICBDD30
DOWNDRAFTS
51 mm
356mm
730mm
WDOWNDRAFT WIDTH
ACHIMNEY WIDTH
172mm
254mm
330mm
330mm
381mm
64 mm
60 mm
NOTE: Shown with front mounted internal blower with 152 mm round discharge,dashed line represents rear mount.
Downdraft
DIMENSIONS
WIDTH W A
ICBDD30 762 mm 673 mm
ICBDD36 914 mm 826 mm
ICBDD45 1143 mm 978 mm
wolfappliance.com | 109
Planning Information
Wolf downdrafts can be installed with most Wolf cooktops, but are not compatible with the grill and steamer modules. Downdrafts can be installed with the sealed burner ran-getop model ICBSRT304. An accessory trim kit is necessary for this installation. Contact an authorized Wolf dealer for details.
For installation with a Wolf cooktop, a minimum 638 mm deep flat countertop is required.
For installation with a sealed burner rangetop or 762 mm or 914 mm contemporary cooktop, an accessory trim kit is required. Contact an authorized Wolf dealer for details.
The remote-mounted control module must be located within 2.7 m of the downdraft assembly and a minimum 76 mm from the edge of the cooktop cutout.
BLOWERS
Internal and remote blowers are available through an authorized Wolf dealer. Refer to Ventilation Suggestions on pages 117–119.
Internal blowers include a 152 mm round discharge and can be front or rear mounted. It can be discharged in any direc-tion by rotating the blower box. Remote blowers include a 254 mm discharge and can be discharged from the front or rear.
Consult a qualified HVAC professional for specific installa-tion and ducting applications.
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply as shown in the illustrations on the following pages. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
Certain installations may require that the electrical supply be placed in an adjacent cabinet.
ELECTRICAL REQUIREMENTS
Electrical Supply 220-240 V AC, 50 Hz 220 V AC, 60 Hz
Service 1.9 A
Receptacle grounding-type (earthed)
Power Cord .8 m
DOWNDRAFT SYSTEMS
110 | English
DOWNDRAFT SYSTEMS
E
FRONT VIEWSIDE VIEW
*152 mm back from countertop cutout when internal blower is rear mounted.
NOTE: Internal blower 152 mm round, side, rear or bottom discharge. Remote blower 254 mm round, rear discharge.Centerline indicates center of downdraft cutout.
540mm
540mm
210 mm*
COOKTOP CUTOUT
68 mm
TOP VIEW
594mm
210 mm*
WDOWNDRAFT
CUTOUT WIDTH
E
Downdraft
INSTALLATION WITH STANDARD INSTALLED COOKTOP
CUTOUT WIDTH W
ICBDD30 699 mm
ICBDD36 851 mm
ICBDD45 1003 mm
wolfappliance.com | 111
DOWNDRAFT SYSTEMS
E
FRONT VIEWSIDE VIEW
*152 mm back from countertop cutout when internal blower is rear mounted.
NOTE: Internal blower 152 mm round, side, rear, or bottom discharge. In-line and remote blower 254 mm round, rear discharge.Centerline indicates center of downdraft cutout.
540mm
540mm
210mm*
594mm
210 mm*
WDOWNDRAFT
CUTOUT WIDTH
E
COOKTOP CUTOUT
TOP VIEW
59 mm
Downdraft
INSTALLATION WITH FLUSH INSTALLED COOKTOP
CUTOUT WIDTH W
ICBDD30 699 mm
ICBDD36 851 mm
112 | English
FRONT VIEWSIDE VIEW
483 mmPLATFORM DEPTH
FRONT VIEWSIDE VIEW
*152 mm back from countertop cutout when internal blower is rear mounted.
NOTE: Internal blower 152 mm round, side, rear or bottom discharge. Remote blower 254 mm round, rear discharge.Centerline indicates center of downdraft cutout.
540mm
210 mm*
TOP VIEW
WDOWNDRAFT
CUTOUT WIDTH
210 mm*
540mm
594mm
RANGETOP OPENING
68 mm E
E
DOWNDRAFT SYSTEMS
Downdraft
INSTALLATION WITH SEALED BURNER RANGETOP
CUTOUT WIDTH W
ICBDD30 699 mm
ICBDD36 851 mm
wolfappliance.com | 113
PRO VENTILATION
Pro Ventilation Hoods
Professional heritage shines through in Wolf professional-style ventilation. Exteriors are heavy-duty, welded stainless steel, so finely hand-finished that they appear seamless. Pro wall hoods are available in a variety of widths. Stainless steel baffle filters and halogen lighting extend the profes-sional look and back it up with pro-level performance. All pro ventilation hoods are crafted of stainless steel.
61 cm / 69 cm DEEP
PRO HOODS
WALL HOODS
114 | English
Pro Hoods
69 cm DEEP WALL HOOD
61 cm DEEP WALL HOOD
686 mm
305mm
102 mm
457mm
WWIDTH
PRO VENTILATION
WIDTH
61 cm DEEP WALL HOOD W
91 cm, 122 cm
69 cm DEEP WALL HOOD W
76 cm, 91 cm, 107 cm, 122 cm, 152 cm
102 mm
610 mm
305mm
457mm
WWIDTH
wolfappliance.com | 115
Planning Information
Pro ventilation hoods are recommended for use with all Wolf cooking appliances. Wall hoods should be at least as wide as the cooking surface.
For optimal performance in wall hood applications, a pro 69 cm deep wall hood is recommended for use with ranges and rangetops with a charbroiler or griddle.
Installation of the hood should be 762 mm to 914 mm from the bottom of the hood to the countertop.
Pro hoods are shipped without a blower assembly. Internal and remote blowers are available through an authorized Wolf dealer. The blower will vary in size and is dictated by the cooking unit, volume of air, and length of the duct run. Refer to Ventilation Suggestions on pages 117–119.
Pro hoods accommodate a 254 mm round duct and have a vertical discharge. For the 61 cm and 69 cm deep wall hoods, a horizontal discharge kit is available through an authorized Wolf dealer.
Consult a qualified HVAC professional for specific installa-tion and ducting applications.
Optional stainless steel duct covers in a variety of heights are available for pro wall hoods through an authorized Wolf dealer.
PRO VENTILATION
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply within the shaded area shown in the illustration on the following page. Allow a minimum 305 mm electrical cable for connection. A separate circuit servicing only this appliance is required.
ELECTRICAL REQUIREMENTS
Electrical Supply 220-240 V AC, 50 Hz 220 V AC, 60 Hz
Service 1.9 A
RECIRCULATING INSTALLATION
61 cm and 69 cm deep wall hoods with an internal blower (1014 CMH or less), 76 cm and 91 cm widths only, can be used in a non-ducted application with a recirculating filter. In this installation, kitchen air is purified through the filters and returned as clean air into the room. A recirculation kit, avail-able through an authorized Wolf dealer is required.
116 | English
PRO VENTILATION
Installation
61 cm / 69 cm DEEP WALL HOODS
E 152mm
762 mm TO 914 mm BOTTOM EDGE TO COUNTERTOP
127mm
wolfappliance.com | 117
Blower Assemblies
For Wolf ventilation hoods and downdrafts that do not include a blower assembly, an internal or remote blower assembly must be selected to accommodate the cooking appliance, CMH requirements, and homeowner preferences. Internal and remote blowers are avail able through an autho-rized Wolf dealer.
VENTILATION SUGGESTIONS
622mm
394mm
718mm
527mm
629mm
356mm
121mm
254 mmDIAMETER
375mm
749mm
749mm
457 mm
559mm
257mm
184mm
254mm
254 mmDIAMETER
375mm
749mm
749mm
533 mm
635mm
264mm
184mm
254mm
254 mmDIAMETER
1528 CMH REMOTE 2028 CMH REMOTE 2535 CMH REMOTE
Ventilation suggestions on the following pages provide Wolf product CMH and blower options for each ventilation hood and downdraft.
Refer to the illustrations below for the dimensions of Wolf remote blowers. Installation instructions shipped with each Wolf ventilation product provide detailed specifications.
118 | English
VENTILATION SUGGESTIONS
Wolf Product CMH
CMH COOKTOP HOOD DOWNDRAFT PRO HOOD
COOKTOP / MODULE
ICBCI152TF/S ICBCG152TF/S 900 900 1014
ICBSM15TF/S ICBGM15TF/S 900 1014
ICBTM15TF/S ICBMM15TF/S 900 900 1014
ICBCI243TF/S ICBCI243C/B 900 1014
ICBCI304TF/S ICBCI304T/S 900 900 1014
ICBCI304C/B 900 1014
ICBCG304T/S ICBCG304P/S 900 900 1014
ICBCI365TF/S ICBCI365T/S 900 900 1014
ICBCI365C/B 900 1014
ICBCG365T/S ICBCG365P/S 900 900 1014
ICBCG365C/S 900 1014
DUAL FUEL RANGE
ICBDF304 ICBDF366 1014
ICBDF364C ICBDF364G 1528
ICBDF486C ICBDF486G ICBDF484CG ICBDF484F 1859
ICBDF606CG ICBDF604CF 1859
SEALED BURNER RANGETOP
ICBSRT304 900 1014
ICBSRT364C ICBSRT364G 1528
ICBSRT486C ICBSRT486G ICBSRT484CG ICBSRT484F 1528
wolfappliance.com | 119
VENTILATION SUGGESTIONS
Wolf Ventilation Blower Options
BLOWER INTERNAL REMOTE
CMH 900 1014 1528 1859 1528 2028 2535
COOKTOP HOOD
ICBVW30B ICBVW36B ICBVW45B ICBVI42B • •
ICBVW30S ICBVW36S ICBVI42S • • • •
ICBVW36G ICBVW45G ICBVI45G • •
ICBVC36S ICBVC48S •
ICBVU24S ICBVU30S •
DOWNDRAFT
ICBDD30 ICBDD36 ICBDD45 • • • •
PRO 61 cm DEEP WALL HOOD
ICBPW362418 • • • • • •
ICBPW482418 • • • • • •
PRO 69 cm DEEP WALL HOOD
ICBPW302718 • • • • • •
ICBPW362718 ICBPW422718 • • • • • •
ICBPW482718 • • • • • •
ICBPW602718 • • • • • •
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowflake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf & Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries. All other trademarks are property of their respective owners in the United States and other countries.
120 | English
Wolf Appliance International Limited Warranty
FOR RESIDENTIAL USE
FULL TWO YEAR WARRANTY*
For two years from the date of original installation, this Wolf Appliance product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Wolf Appliance under the above warranty must be performed by Wolf Factory Certified Service, unless otherwise specified by Wolf Appliance, Inc. Service will be provided during normal business hours.
LIMITED THIRD THROUGH FIFTH YEAR WARRANTY
For five years from the date of original installation, Wolf Appliance will repair or replace the following parts that prove to be defective in materials or workmanship: gas burners (excluding appearance), electric heating elements, blower motors (ventilation hoods), electronic control boards, magnetron tubes and induction generators. The part(s) will be repaired or replaced, free of charge, with the owner paying for all other costs including labor. All service provided by Wolf Appliance under the above warranty must be performed by Wolf Factory Certified Service, unless otherwise specified by Wolf Appliance, Inc. Service will be provided during normal business hours.
For more information regarding your Wolf product warranty, contact your authorized Wolf dealer. Warran-ties must comply to all country, state, city, local and or ordinance.
*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited 60-day parts and labor warranty for cosmetic defects.
wolfappliance.com | 121
Wolf Appliance International Outdoor Limited Warranty*
FOR RESIDENTIAL USE
FULL ONE YEAR WARRANTY**
For one year from the date of original installation, this Wolf Appliance product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Wolf Appliance under the above warranty must be performed by Wolf Factory Certified Service, unless otherwise specified by Wolf Appliance, Inc. Service will be provided during normal business hours.
LIMITED FIVE YEAR WARRANTY
For five years from the date of original installation, Wolf Appliance will repair or replace the following parts that prove to be defective in materials or workmanship: stainless steel briquette trays, gas valves, drip pans, electronic control boards and electric heating elements. If the owner uses Wolf Factory Certified Service, the service provider will repair or replace these parts with the owner paying for all other costs, including labor. If the owner uses non-certified service, the owner must contact Wolf Appliance, Inc. (using the information below) to receive repaired or replacement parts. Wolf Appliance will not reimburse the owner for parts purchased from non-certified service or other sources.
For more information regarding your Wolf product warranty, contact your authorized Wolf dealer. Warran-ties must comply to all country, state, city, local and or ordinance.
*Product must be approved for outdoor use, designated by model and serial number.
**Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited 60-day parts and labor warranty for cosmetic defects.
WOLFAPPL IANCE.COM