Post on 10-Jul-2020
transcript
Obtaining a 2020 Catalog You will first need to obtain the manufacturer catalog; either from a CD, the manufacturer’s website or the 2020.net portal. In most circumstances, the catalog will have a .zip extension (example sampleF.zip), but on rare occasions the file will have an .exe extension. If your catalog has an .exe. extension, simply double click to install. If your catalog has a .zip extension, follow the steps below to install it.
Tip: It’s a good idea to download all of your manufacturer catalogs to a specific folder on your computer, external hard drive, or network server. This will make it easy to find the catalog(s) during installation or when you may need them at a later date.
Installing a Catalog (.zip extension)To install a manufacturer catalog, first close 2020 Design and then follow the steps below:
1. Open 2020 Design’s Catalog Manager from the Tools folder in the Design program group located in the Windows Start Menu or from the 2020 shortcut bar.
Installing Manufacturer CatalogsDesign
Page 2
Design
2. In the Catalog Tool Utilities window, click the Install icon.
3. Click Next.
Page 3
Design
4. Click ‘...’ and browse to locate your catalog.
If you’ve saved your manufacturer catalogs to a specific folder on your computer, external hard drive, or network server, browse to that location to find your catalog. Select your catalog zip file and click Open.
Page 4
Design
5. Click Next.
6. Click Start.
The catalog installation will start, and you will see the progress in a pop-up window.
Page 5
Design
7. In the success window, click OK.
8. Repeat to install more catalogs or click Close to close the Catalog Tools window.
Open 2020 Design, and the newly installed catalog(s) will appear in the catalog list along with 2020 Design’s default catalogs and any other catalogs you may have installed. The catalog zip file is no longer needed; you can delete it if necessary or store it for future installations.
©2014 20-20 Technologies Inc. All rights reserved. All trade names of this document are either registered, pending or common law trademarks of 20-20 Technologies Inc. or of their respective holders. The software herein and its related documentation are subject to modification by 20-20 Technologies Inc. and to the terms and conditions of the License Agreement included with the media.
2020spaces.com
AmericasLaval, QC, Canada
Cary, NC, USA
Foxboro, MA, USA
Grand Rapids, MI, USA
São Paulo, Brazil
20-20 Technologies, Inc.400 Armand-Frappier Blvd.
Suite 2020
Laval, QC Canada H7V 4B4
Worldwide Offices2020 HeadquartersEuropeWiener Neustadt, Austria
Mouans-Sartoux, France
Osnabrück, Germany
Ashford, UK
Bolton, UK
Asia-PacificDhaka, Bangladesh
Beijing, China
Guangzho, China
Shanghai, China
Pune, India
TF: +1.866.698.2020 T: +1.514.332.4110 F: +1.514.334.6043 E: sales@2020spaces.com