Post on 24-Dec-2014
description
transcript
Mark Anthony Hall
PreserveHome Canning System
Table of Contents :
PreserveHome Canning System
Jeff and Melissa are a young married couple. They have an
abundance of fruits and vegetables that they just picked from
their garden. Neither one of them know how to can food nor have
the time to learn the traditional process because they have busy
schedules. They need a product that will ensure food safety and is
easy enough for them to preserve any type of food.
Jane is a 40-year-old female. A mother of 4 and happily married.
Jane who lives in an urban community makes a joint income of
$90,000 a year. Throughout the season she cans different types
of food mostly jams, jellies, vegetables and tomato juice. Jane has
been canning for years but time is more of a problem and she just
can’t dedicate the time she used to, canning the traditional way.
Jane needs a product that reduces the complexity of the traditional
and is more time efficient.
• Females 40+ years.• Home owners.• Grow fruits and vegetables in their new garden.• Her lifestyle is too busy to preserve using
traditional methods of home canning.
The design of Preserve had to address problems for both generations while aesthetically respecting the retro tradition and modern kitchen.
• Males and Females 25-30 years of age.• Condo or Small Home owner• Both work full time.• Intimidated by traditional methods of home
canning.
Target Market Market BMarket A
After doing several blue ocean strategy canvases, it became apparent that the features of “Preserve” will be marketable to fit in any of the 3 market areas: Food Prep, Preserving, and Cooking. An abundance of products are available in each of the market areas.
Cost Aesthetic
(Good)
(Bad)
Multi Functional Use of space Ease of Use Safety
Water Bath Canner - $45
Digital Food Steamer - $34 Electric Pressure Cooker - $100
Pressure canner - 82 Deep Fryer - $45
GE Slow Cooker - $40 Bread Maker - $45
Market GapsPotential Design Opportunities
Toaster Oven - $100
Preserving CookingFood Prep
Photographic Analysis
A step by step photographic analysis of the canning process was used to narrow the focus of the project. It was identified that the key problem areas were directly linked to the process of canning as well as placing lids onto jars and sealing them. This became the task addressed by the proposed design.
• Safety• Uniformity • Multiple work stations
Operational Sequence Diagram
The OSD was used to identify all decision making points in the process in order to move forth with the design development. It became apparent that an intuitive user interface was needed that was easy to use and would assist the user successfully.
NO InformationNO Change
NO Action in the User’s Mental State
An ActionChange in User’s Mental StatePrevious KnowledgeChoices / DecisionsInformation TransmittedInformation Recieved
• Multiple methods & recipies
• one v.s. multiple work stations
• Pre-heat Lids & Jars
1. Monitor - The pressure, temperature & canning process.
2. Ease of Use – User interface is intuitive & reinforces confidence for user. Manual & pre-programed setting.
3. Safe – Limits potential for injuries. I.e. pressure build up or steam burns.
4. Multi Functional –Steralizes jars and lids preparing for any method.
5. Versatile - Water bath and Hot pack methods.
6. Use of Space –Storage of tools.
7. Human Factors - Display angled to prevent glares and back strains.
5
2
7 1
3
4
6
6
3
Power On/Off
Prep ready
Low water indicator
Cancel button
Enter (next step)
Scroll buttons
C
C
00:00:00
Micro-Computer Technology A microcomputer is a computer with a microprocessor as its central processing unit.Results are reliable each time.
Capabilities• Bread maker- 18 different bread settings• Rice cooker- special heat elements keep rice warm with out burning or
drying the rice.• Slow cooker- 3 different cook settings.
Objective • To incorporate technology into “Preserve” to achieve superior performance
with safe and reliable results every time. • Pre-programed selection of recipes and manual settings will make
“Preserve” easy to use for both markets.
Digital LED interface• Flat panel digital read out• Easy-clean control buttons
1. Retro and Contemporary style to respect the historic tradition and modern kitchen.
2. Repetitive horizontal and contour lines.
Base is needed for internal components to be housed but still seems bottom heavy. Contouring lines and interface proportions need refined.
Manufacturing Materials
1. Polished aluminum
2. High Heat Resistant ABS
3. Micro-Computer Technology
4. Mechanism
PreserveHome Canning System
Safety
• Locking Pin - Prevents the lid from being opened while under pressure.
• Pressure Regulator Knob - If pressure exceeds its max knob will be
forced upward.
• Automatic Shut Off - Unit will automatically shut off when the pressure
has exceeded its max.
Special Features
• Built in Thermostat- for automatic temperature control.
• Gasket Ring- Completely pressurized structure keeps the optimal cooking temperature.
• Comfort Grip Handle with Steam Protector - Prevents steam burns from hands while placing or removing something.
• LED Digital Display - Gives you easy to read controls and allows you to monitor you time and settings as you can.
• Multi-Functional - Preserve incorporates all canning methods which combine heat steam and pressure into one easy-to-use unit.
24
3
2
1
1
2
The Mangochine is a very inexpensive system that uses local mangoes to neutralize over-chlorinated water in Haiti where 75 % of the population lives in poverty and make less than a dollar a day.
Sponsored Competition By:
• Ways of agitating chlorinated water
• Children recess as enegry source
• Pictoral charts for communication
• Technical Recearch
• Sketch Refinement
• Finalizing
ImplementationHaitian potters can produce quantities of identical pots and already produce pots similar to this design.NGO’s can create cardboard booklets with templates that can be distributed to local potters.The cardboard templates can be used as references for shapes and dimensions.Instructions are stamped inside of lid making the system easy to use.
FIRSTplacewinner
Featured By:
Objective:
To re-design the McGill Air Flow LDK making it more user friendly, portable, and compact which will reflect the quality of product that McGill offers to its costumers.
Sponsored Competition By:
Issues:TransportationUser interfaceAppearance
Size DurabilityStorage
• Thumbnail sketches
• Brainstorming method
• Functionality
• Different components
• Compress flex tube for storage.
• Swivel handle for maneuverability & transportation.
• Fold out try used to house charts and as a work station.
Size, Transportation, and Intuitive interface where all heavily emphasized in every client consulta-tion of presenting concepts.
Objective:
To develop a line of products to a specific identified target consumer segment of the market.
Market Research:
Professional MenAge 36-55 years oldHome ownerCEO or ExecutiveWell-establishedWell-groomed1-4 kidsUpper ClassSophisticated
• Too feminine• More dynamic
• Minimalize soft form• Strong movement
The Sliver LineThe Sliver Line
• Rhino computer model• Detailed manufacturing process• Only for pencil sharpener• Client request
Objective :To design a family of 3 products that form a product line for a
fictitious sporting goods company.
• Water intermediate scuba divers.
• Line of products focusing on 18-30 year old gender neutral adults.
• Very stylish and color coordinated.
scuba gear
Conceptual Development :Exploring color, material, and form to convey products as a family.
• Scuba Knife
• Depth and Pressure Gauge
• Scuba gloves
scuba gear
Thank you
PreserveHome Canning System