Post on 24-May-2018
transcript
Always consult your owner’s manual for automatic transmission fluid requirements.
• Helps provide smooth shift performance where DEXRON III or a MERCON fluid is specified
• Designed to provide outstanding high temperature oxidation resistance• Offers excellent protection against corrosion, wear and rust• Compatible with automatic transmission components such as elastomer
seals and plastic parts
DEXRON® - III/MERCON® ATF
DEXRON® - III/MERCON® ATF
PEAK® PERFORMANCE AUTOMATIC TRANSMISSION FLUID is formulated with select highly refined base oils and specially balanced additives to meet the demands placed on automatic transmissions. PEAK® PERFORMANCE AUTOMATIC TRANSMISSION FLUID contains special friction modifiers that provide smooth lock-ups required by both General Motors and Ford. Its high viscosity index permits use over a wide temperature range by providing excellent low temperature fluidity while retaining the desired viscosity at high temperatures.
DESCRIPTION:
PEAK® PERFORMANCE AUTOMATIC TRANSMISSION FLUID is recommended for use in automatic transmissions of General Motors, Ford (except those that specify Ford M2C33-F Type F fluids) and other U.S. and import vehicles requiring DEXRON III, DEXRON IIE, DEXRON II and MERCON ATF. It may also be used in Allison automatic transmissions, including those that require C-4 fluids, and Caterpillar transmissions requiring TO-2 performance.
APPLICATION:
BENEFITS:
DEXRON® - III/MERCON® ATF
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES:
DEXRON® - III/MERCON® ATF
HANDLING AND SAFETY INFORMATION Refer to Old World Industries Material Safety Data Sheet (MSDS).The MSDS is available from your PEAK Performance Supplier at www.peaklubricants.com, or by callingOld World Industries’ PEAK technical support line at 1-800-477-5847.
API Gravity (ASTM D-1298)
Flash Point, °C (ASTM D-93)
Pour Point, °C (ASTM D-97)
Viscosity‘@ 40 ˚C, cSt (ASTM D-445)
‘@ 100 ˚C, cSt (ASTM D-445)
Viscosity Index (ASTM D-2270)
32.98192-46
35.227.29179
Drum Part NumberQuart Part Number
DEXRON® - III/MERCON® ATF
Individual UPC CodeCase UPC CodeSCC-14 Code
0-74804-01314-6
0-74804-11314-3
6-00-74804-01314-8
Test (Method)
Bulk Part Number
Shipping Information
Unit Pack Unit Weight *Pallet Weight Units per Pallet
Pieces per Truck
Pallets per Truck
Quarts 12/1 Quarts 2.08 lbs. 2,150 lbs. 1,008 quarts 21,168 qts. 21
BulkPails
N/A5 Gallon
N/A40 lbs.
N/A1,490 lbs.
N/A36 Pails
N/A756 Pails
N/A21
Drums 55 Gallon 450 lbs. 1,850 lbs. 4 drums 84 drums 21
5 Gallon Pail Part Number
PDTO01PDTO07
PDTO00
PDTO05
PDT007 PDT005 PDT001 PDT000
0-74804-02054-0
-
-
0-74804-03403-5
-
-
-
-
-
(*) Includes pallet weight
PEAK and the PEAK Mountain Graphic are Registered Trademarks of Old World Industries, LLC, INDYCAR Series (and Design) and Indianapolis 500 (and Design) are trademarks of Brickyard Trademarks, Inc., used with permission.
Distributed byOld World Industries, LLCNorthbrook, IL 60062p 800.323.5440w peaklubricants.com