Post on 18-Mar-2020
transcript
Digital Dentistry Solution
Mill - Clinic
Scanner
Mill
∙ Optimized for glass-ceramic∙ High speed and steady quality in milling∙ Simple and elegant design
∙ Quicken data acquisition speed by using white light scanning technology∙ Doorless access for use convenience∙ Good compatibility of output data (STL file format)
∙ Diverse design and precise production with simultaneous 5-axis milling system∙ Equipped with a spindle, allowing highly precise and fine machining∙ Enhanced convenience with user-focused interface∙ Self-diagnosis and automatic tool changing system
02
CAD/CAM System
Digital Dentistry Solution
∙ Optimized for glass-ceramic∙ High speed and steady quality in milling∙ Simple and elegant design
03
Mill - Clinic
Dentium is planning on releasing a CAD/CAM System which is not only available to dental labs, but also to dental clinics for chairside use. This same-day prosthesis will increase the satisfaction of clinicians and patients, and we intend to further that benefit by developing a more convenient system and a comprehensive software through an on-going investment in research and development. The rainbow Mill - Clinic is expected to be released in 2015 and is an in-practice milling equipment optimized for glass-ceramic. It is capable of simultaneous 5-axis milling, delivering a prosthesis with high precision.
Material Glass Ceramic, PMMA
Control Axis Simultaneous 5-Axis
Milling Type Wet Processing
Tool Change Automatic
Block Shape Bar, Disk Type
Digital Dentistry Solution04
Scannerrainbow™ Scanner offers a precise and accurate scanning capability and reliable performance. The doorless entry accessibility makes the setting up of the scan-jig fast and easy. The open STL file format enables compatibility of various CAD software. Increased speed and highly accurate scanning of 3D data are possible due to the perfect synchronization between cameras and pattern projection device, and data processing technology. Dentium’s diverse implant system library, as well as other implant systems’ library, provides convenience of prosthetic design.
∙ Quicken data acquisition speed by using white light scanning technology∙ Doorless access for use convenience∙ Good compatibility of output data (STL file format)
Scan Time 50 Seconds (Single)
Scan Area (W X D X H) 80 X 60 X 60 mm
Camera Resolution 1.3 Megapixels
Dimension (W X D X H) 28 X 40 X 45 cm
Supply Voltage 100 ~ 240 V, 50 ~ 60 Hz
Weight 15 kg
Warranty 1 Year
Scan Type White Light Technology (Twin-Camera)
Zirconia, Resin, Wax
Simultaneous 5-Axis
60,000 rpm, 250W
All Servo Motors
7 Posts (Automatic Changes)
Dry Processing
200 - 230 V~, 50/60 Hz
CAM Table, Dust Collector
2 Years
Material
Control Axis
Spindle
Motion Drives
Tool Posts
Milling Type
Supply Voltage
Weight
Options
Warranty
Dimension(W X D X H)
Main Structure + Table + Dust Collector71 x 81 x 170 cm
Main Structure71 x 81 x 84 cm
Main Structure + Table + Dust Collector280 kg
Main Structure145 kg
Digital Dentistry Solution 05
Millrainbow™ Mill can undercut and mill various shapes freely and precisely with the simultaneous 5-axis milling system. rainbow™ Mill offers a reliable performance with high torque and fast movement due to the mounting of high performance servo motors. By adopting the high speed and the 1µm precision spindle, the low vibration minimizes block chipping. Furthermore, wasting of the materials and time may be minimized, which can be attributed to the self-diagnosis and automatic tool changing system. Among dental milling machines, rainbow™ Mill provides highly precise components and mechanical rigidity. It is now possible to mill various kinds of materials including Zirconia, PMMA, resin ceramic, and wax.
Scan Time 50 Seconds (Single)
Scan Area (W X D X H) 80 X 60 X 60 mm
Camera Resolution 1.3 Megapixels
Dimension (W X D X H) 28 X 40 X 45 cm
Supply Voltage 100 ~ 240 V, 50 ~ 60 Hz
Weight 15 kg
Warranty 1 Year
Scan Type White Light Technology (Twin-Camera)
Zirconia, Resin, Wax
Simultaneous 5-Axis
60,000 rpm, 250W
All Servo Motors
7 Posts (Automatic Changes)
Dry Processing
200 - 230 V~, 50/60 Hz
CAM Table, Dust Collector
2 Years
Material
Control Axis
Spindle
Motion Drives
Tool Posts
Milling Type
Supply Voltage
Weight
Options
Warranty
Dimension(W X D X H)
Main Structure + Table + Dust Collector71 x 81 x 170 cm
Main Structure71 x 81 x 84 cm
Main Structure + Table + Dust Collector280 kg
Main Structure145 kg
Simultaneous 5-Axis Milling System
Sharp Margin Milling
ø 2.0 mm ø 1.0 mm ø 0.5 mm
Self-Diagnosis and Automatic Tool Changing System
∙ Diverse design and precise production with simultaneous 5-axis milling system∙ Equipped with a spindle, allowing highly precise and fine machining∙ Enhanced convenience with user-focused interface∙ Self-diagnosis and automatic tool changing system
Digital Dentistry Solution
Davinci3D Viewer Software
Panoramic (3D Scan-Based) Panoramic (2D Scan-Based)
06
∙ A 3D viewer software developed by a company specialized in implant dentistry∙ Customer service can be provided directly from the developer ensuring better service ∙ Comprehensive menu structure by combining major functions∙ Provides an intuitive and convenient user-interface∙ Provides consultation and presentation friendly gallery in PowerPoint file format, as well as the ability to easily generate reports.
Digital Dentistry Solution
iOSThe ability to view results immediately with the rainbow™ iOS simplifies the workflow process,with less stress for you and your staff, fewer procedural steps, and less difficulty.
∙ Live 3D visualization∙ Easy-to-use multi touch screen∙ Small & lightweight handpiece∙ Open STL∙ Powder free
∙ Live 3D visualization High digital impression accuracy for high quality restoration fit
∙ Easy-to-use multi touch screen
∙ Powder free ∙ Open STL
07
T productO productA product
STL
T productO productA product
STL
T productO productA product
STL
T productO productA product
STL
T productO productA product
STL
T productO productA product
STL
17.5(w) x 17.5(h) x 275(d) mmWeight 200g
Head size17mm
Digital Dentistry Solution
CT SCAN
rainbow™ Davinci
rainbow™ iOS
rainbow™ Blockrainbow™ Porcelain
rainbow™ Mill - Clinic
rainbow™ Scanner
rainbow™ Mill
ALL-in-ONE SYSTEM forLAB & DIGITAL DENTISTRY
rainbow™ Lab & Digital Dentistry System is a complete dental diagnostic system ranging from lab products to CAD/CAM equipment. Dentium is committed to developing, manufacturing and offering a full series of products related to prosthetics for our customers. The system is compatible with other companies’ software and equipment. Dentium is currently the only company developing and manufacturing the “all-in-one system” in the nation (South Korea). We expect to release a diverse range of Lab & Digital Dentistry products in 2015 as we continue to pave the way as the leader in the industry.
T productO productA product
STL
08
HEAD OFFICE3105 Trade Tower, 513 Yeongdong-daero, Gangnam-gu, Seoul, Korea 135-731
www.dentium.com / biz_mail@dentium.com
Specifications are subject to change without notice. Some of the products listed in this catalog may not be available in the market due to pending approval.
RDDS 1412 [Rev.2]
Digital Dentistry Solution