DIN 963 - New Fastener LLC

Post on 09-Feb-2022

4 views 0 download

Preview:

Click to see full reader
Report this document
SHARE

transcript

Top related

DIN 564 - New Fastener 2 DIN 564 2 Dimensions DIN 78 — Asp type thread end 150 to 300 kw is the minimum wrenching height; e shall be maintained within kw. al as in DIN 76-1, dp,
Documents
DIN 603 - New Fastener
Documents
DIN 925 - New Fastener · DIN 925 Page 3 Standards referred to DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN ISO 13 Part 15 76 Part 1 267 Part 1 267 Part 2 267 Part 5
Documents
DIN 7972 - New Fastener LLCalready been adopted —any countrie. and ah Ich al ao ror..d t b. baaiø ot t h. i.øuea ot DIN 7971. DIN DIN • o coapar.d previous Type A thread with
Documents
DIN 547 - New Fastener LLC · DIN 547 Zweilochmuttern Supersedes November 1970 edition. In keeping with current practice in standards published by the International Organization for
Documents
DIN 1480 - New Fastener LLC · Welding end AE M 12 DIN 1480 x' according to DIN 76 ... Strength category or material: 3.6 according to DIN 267 Part 5, Other materials by agreement
Documents
DIN 522 - New Fastener · PDF filewhich thus exhibit inside and outside rollover and fracture (cf. DIN 6930 Part 2 and DIN 6932). it does not cover washers manufactured by machining
Documents
DIN 937 - New Fastener LLC · 2013-03-30 · DIN 267 Part 92) shall apply with regard to electroplating. DIN 267 Part 10 shall apply with regard to hot-dip galvanizing. DIN 267 Part
Documents
DIN 605 - New Fastener LLC · 2013. 3. 24. · UDC 621.882.215.091.6 Flat countersunk square neck bolts with long square Senkschrauben mit hohem Vierkantansatz October 1981 DIN 605
Documents
DIN 9021 - New Fastener LLC · DIN 522. Bright. DIN 522 shall apply with regard to surface roughness. DIN 267 Part 9 shall apply with regard to electroplating, any other types of
Documents
DIN 6796 - New Fastener LLC · Page 2 DIN 6796 3 Technical delivery conditions DIN 267 Part 26 shall apply with regard to the technical delivery conditions. Material: FSt = spring
Documents
DIN 937 - New Fastener LLC · 2013-03-30 · DIN 267 Part 10 shall apply with regard to hot-dip galvanizing. DIN 267 Part 5 shall apply with regard to acceptance testing. l) By way
Documents
DIN 6914 - New Fastener · DIN 18 800 Part I, together with DIN 6915 hexagon nuts and DIN 6916, DIN 6917 or DIN 6918 washers. 2 288 Dimensions ... DIN 6915 hexagon screw DIN 6914
Documents
Anwendungswarnvermerk - New Fastener LLC · ISO 16048, Passivation of corrosion-resistant stainless-steel fastener E DIN EN ISO 14581:2012-01
Documents
DIN 525 - New Fastener · 2013-03-23 · Page 2 DIN 525 3 Technical delivery conditions Material General requirements Tolerance class Thread Standard Property class (material) Mechanical
Documents
FASTENER SYSTEMS - PrimeWebcdn.primeweb.fi/ · FASTENER SYSTEMS The company IHF develops, produces and sells high- ... assembly according to DIN 29900 part 1, 11/2008 and DIN 18800
Documents
T084 / DIN 84 T963 / DIN 963 T965 / DIN 965 T985 / DIN ... · T084 / DIN 84 T963 / DIN 963 T965 / DIN 965 T985 / DIN 7985 D933 / DIN 933 D912 / DIN 912 D603 / DIN 603 D934 / DIN 934
Documents
DIN 6922 - New Fastener · UDC 621.882.211 Hexagon flange bolts with reduced shank Sechskantschrauben mit Flansch und reduziertem Schaft June 1983 DIN 6922 As it is current practice
Documents
DIN 705 - New Fastener LLC
Documents
DIN 2393 - New Fastener LLC | Comprehensive … · steel tubes and is to be used in conjunction with DIN 2393 ... the technical delivery conditions specified in DIN 1 7 ... Tube DIN
Documents

Copyright © 2018 DOCUMENTS