DIN ISO 34-1 - img43.chem17.comimg43.chem17.com/5/20120614/634752691775781250.pdf · DIN ISO 34-1...

transcript

ICS 83.060

Rubber, vulcanized or thermoplasticDetermination of tear strength

Part 1: Trouser, angle and crescent test pieces(ISO 34-1 : 2004)

Elastomere oder thermoplastische Elastomere – Bestimmung des Weiterreißwiderstandes –Teil 1: Streifen-, winkel- und bogenförmige Probekörper (ISO 34-1 : 2004)

This standard incorporates International StandardISO 34-1 Rubber, vulcanized or thermoplastic – Determination of tear strength – Part 1: Trouser, angle and

crescent test pieces.

A comma is used as the decimal marker.

National forewordThis standard has been prepared by ISO/TC 45 ‘Rubber and rubber products’.The responsible German body involved in its preparation was the Normenausschuss Materialprüfung(Materials Testing Standards Committee), Technical Committee Prüfung der physikalischen Eigenschaftenvon Kautschuk und Elastomeren.DIN ISO 471 and DIN ISO 6133 *) are the standards corresponding to International Standards ISO 471 andISO 6133, respectively, referred to in clause 2 of the ISO Standard.

AmendmentsDIN 53507, March 1983 edition, and DIN 53515, January 1990 edition, have been superseded by thespecifications of DIN ISO 34-1.

Previous editionsDIN 53507: 1943-11, 1951-12, 1959-01, 1974-07, 1983-07; DIN 53515: 1959-03, 1962-10, 1977-08,1990-01.

*) Currently at draft stage.

DEUTSCHE NORM July 2004

DIN ISO 34-1 {

© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

Normenausschuss Bauwesen (NABau) im DIN

English price group 10www.din.de

www.beuth.de 11.04 9581343

Document comprises 13 pages.

Supersedes DIN 53507,March 1983 edition, andDIN 53515, January1990 edition.

B55EB1B3C7662F79D1B59483A53B9F2F82C98BEEB79391A758F6289FC9E2189466F44B1B87F1478C93A461B85C03EAB5C36FB9BF5CB24915EA7B76FF11CB42CA7A65EAEA1C7D40E8575356704FA3206CF8BE7D37B1ACBF97FA776FD958895323F309BE97AF88DDAFA365

ISO 34-1 : 2004

Rubber, vulcanized or thermoplasticDetermination of tear strength

Part 1: Trouser, angle and crescent test pieces

ISO 34-1 : 2004

DIN ISO 34-1 - img43.chem17.comimg43.chem17.com/5/20120614/634752691775781250.pdf · DIN ISO 34-1...

Documents