Post on 14-Aug-2020
transcript
Type Cat. No. Length Std. Pk.
Perforated 2511120 2m 20
2511120/1M 1m 40
Unperforated 2511110 2m 20
2511110/1M 1m 40
Type Cat. No. Length Std. Pk.
Perforated CA701-15/S-2M 2m 20
CA701-15/S 1m 40
Unperforated CA701-15-2M 2m 20
CA701-15 1m 40
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
DIN RAILACCESSORIES
HIGHLIGHTS
FEATURES
• Altech DIN Rails comply withDIN EN60715, EN50022,EN50035, EN50045standards
• Easy mounting of terminalblocks, power supplies andother control componentsand devices into panel
• Space saving• Reduces labor• 35mm, 32mm and 15mmversions
• 1m and 2m standard length• Custom length available• Perforated, unperforated
MATERIAL
• Zinc-plated steel • 35x7.5mm • 35x15mm • 32mm • 15mm
• Aluminum • 35x7.5mm
• Stainless Steel (Type AISI 304) • 35x7.5mm
DIN RAIL & MOUNTING
18
12.7
4.6
25.4
Preforated Aluminum
Unpreforated
Preforated Steel and Stainless
Unpreforated Steel
Preforated Steel
18
35 mm x7.5 mm deep
35 mm x15 mm deep
DIN35 x 7.5 DIN35 x 15
Zinc Plated Steel Zinc Plated Steel
Type Cat. No. Length Std. Pk.
Perforated 2511125 2m 20
2511125/1M 1m 40
Unperforated 2511115 2m 20
2511115/1M 1m 40
Stainless Steel
Type Cat. No. Length Std. Pk.
Perforated 2511121 2m 20
2511121/1M 1m 40
Unperforated 2511111 2m 20
2511111/1M 1m 40
Aluminum
Dimensions
112
DIN RAIL
SUPPORT BRACKETS UNIVERSAL DIN CLIP
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 113
DIN RAIL & MOUNTINGACCESSORIES
HIGHLIGHTS
SUPPORT BRACKETS
• Elevate DIN Rail awayfrom panel
• Easier mounting ofcomponents
• Suitable for all mounting rails• Increase wiring access• 45° version for improvedvisibility
• Straight brackets availablein 3 heights: • 1” • 2” • 3”
MOUNTING
• Brackets mount with 2screws to any panel or flatsurface
• Tapped center hole for DINRail mounting
MATERIAL
• Zinc-plated yellow chro-mated Steel
UNIVERSAL DIN CLIP
• Clips on to any 35mmDIN Rail
• Flexible mounting solution• Mount any component on35mm DIN Rail
• M4 or M5 mounting hole• Material: zinc-plated steel
Type Cat. No. Length Std. Pk.
Perforated 2511160 2m 10
2511160/1M 1m 20
Unperforated 2511150 2m 10
2511150/1M 1m 20
Cat. No. Std. Pk.
CA603 25
Cat. No. Std. Pk.
M4 D35CLIP-M4
M5 D35CLIP-M5
Cat. No. Height Std. Pk.
CA703 1 in. 25
CA803 2 in. 25
CA903 3 in. 25
Type Cat. No. Length Std. Pk.
Perforated CA601/S 2m 20
74mm(2.98 in.)
52mm(2.05 in.)
M6
18mm(.71in.)
H
Slot 6x15mm(.24x.59 in.)
Ø6mm(.24 in.)
48mm(1.89in)
M6 18mm(.71in)
Ø7mm (.28in)
60mm (2.36in)
74mm (2.91in)
18
Unpreforated Steel
Preforated Steel Preforated Steel
32 mm x15 mm deep
15 mm x5.5 mm deep
DIN32 DIN15
D35CLIPTSTWCA603
Zinc Plated Steel Zinc Plated Steel
Dimensions