DIN_EN_1654_1998-03

transcript

ICS 77.150.30

Descriptors: Copper, strip, springs, connectors.

Kupfer und Kupferlegierungen – Bänder für Federn und Steckverbinder

European Standard EN 1654 : 1997 has the status of a DIN Standard.

A comma is used as the decimal marker.

National forewordThis standard has been prepared by CEN/TC 133.The responsible German body involved in its preparation was the Normenausschuß Nichteisenmetalle (Non-ferrous Metals Standards Committee).For ease of reference, the table overleaf correlates the material designations/symbols used in DIN 1777 withthose used in the present standard.

AmendmentsDIN 1777, January 1986 edition, has been superseded by the specifications of EN 1654.

Ref. No. DIN EN 1654 : 1998-03English price group 16 Sales No. 1116

DEUTSCHE NORM March 1998

EN 1654{

Continued overleaf.EN comprises 39 pages.

© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin.Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).

Copper and copper alloys – Strip for springsand connectors

English version of DIN EN 1654

Supersedes DIN 1777,January 1986 edition.

Previous editionsDIN 1777: 1929-12, 1934-06, 1959-12, 1974-07, 1986-01.

Table: Correlation of the material designations used in EN 1654 and DIN 1777

Material designation

Symbol Number Symbol Number

DIN EN 1654 : 1998-03

English version

ICS 77.150.30

Descriptors: Copper, strip, springs, connectors.

Copper and copper alloys – Strip for springsand connectors

Ref. No. EN 1654 : 1997 E

Kupfer und Kupferlegierungen –Bänder für Federn und Steckverbinder

This European Standard was approved by CEN on 1997-11-06.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Central Secretariat or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Central Secretariat has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.

EN 1654

December 1997

Central Secretariat: rue de Stassart 36, B-1050 Brussels

European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung

|ÈÉË

Cuivre et alliages de cuivre – Bandespour ressorts et connecteurs

EN 1654 : 1997

1) Reference plane

EN 1654 : 1997

DIN_EN_1654_1998-03

Documents