Post on 29-Apr-2018
transcript
®
A Product of Technology
PRESSURE SEAL
BOLTED BONNET
Certified to ISO 9001 Standards
KCCGP 0900-1Direct Seal ®Valves
TABLE OF CONTENTS
About KITZ . . . . . . . . . . . . . . . . . . . . . . . . . . . 3How to Order KITZ Direct Seal® Valves . . . . . . 4Features and Benefits . . . . . . . . . . . . . . . . . . . 5Directional Solidification Process. . . . . . . . . . . 6
PRESSURE SEALStandards/Testing/Applications . . . . . . . . . . . . 7Gasket Arrangement . . . . . . . . . . . . . . . . . . . . 8Dimensions & WeightsGate Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 9Globe Valves. . . . . . . . . . . . . . . . . . . . . . . . . 10“Y” Globe Valves . . . . . . . . . . . . . . . . . . . . . . 11Lift Check Valves . . . . . . . . . . . . . . . . . . . . . 12Swing Check Valves . . . . . . . . . . . . . . . . . . . 13Tilting Disk Valves . . . . . . . . . . . . . . . . . . . . . 14
BOLTED BONNET Standards/Testing/Applications . . . . . . . . . . . 15Features/Dimensions/WeightsGate Valves . . . . . . . . . . . . . . . . . . . . . . . 16-17Globe Valves . . . . . . . . . . . . . . . . . . . . . . 18-19Swing Check Valves. . . . . . . . . . . . . . . . . 20-21
Operator Options . . . . . . . . . . . . . . . . . . . . . 22KITZ Quality . . . . . . . . . . . . . . . . . . . . . . . . . 23
KITZ Corporation ofCalifornia
Alameda, California
About
KITZ CorporationEstablished in 1951, KITZ Corporation is recognized worldwide as a leading manufacturer of quality valves. KITZproduces a wide variety of multi-turn and quarter-turn valves in carbon, stainless, bronze, iron, and other exotic alloys.Our mission is to become the valve of choice in the Refinery, Chemical, Petro-Chemical and Power Generation markets.
KITZ Corporation of CaliforniaIn December, 1999, KITZ acquired Alameda, California based Quality Assured Products (QAP). Founded in 1988, QAPspecializes in the manufacture of high pressure bolted bonnet and pressure seal valves of all types including gate, globeand check (vertical and y-pattern) and top entry ball valves for use in process and power industries.
Operating now as KITZ Corporation of California (KCC), this newest member of our wholly owned Global Manufacturingteam builds valves using the “Directional Solidification” process. This method produces the highest quality castings insignificantly less delivery lead time than is required for conventional castings.
KITZ Direct Seal® valves comply with all applicable standards and KCC's QA System has been certified ISO 9001 byBureau Veritas Quality International.
With KCC, KITZ is dedicated to providing our customers high quality products with numerous combinations of seat andbody/bonnet materials, special end connections as well as automation to meet any application.
Combining the resources of KITZ and the capabilities of KCC, we look forward to supplying solutions to industry’s flow control requirements.
®
3
TRIM NO. WEDGE/DISC SEATS STEM TRIM NO. WEDGE/DISC SEATS STEM01 CR13 CR13 CR13 15 HASTELLOY HARDFACED HASTELLOY05 HARDFACED HARDFACED CR13 16 HARDFACED HARDFACED 18-8-3M08 CR13 HARDFACED CR13 17 HARDFACED HARDFACED 34709 MONEL MONEL MONEL 18 HARDFACED HARDFACED MONEL10 18-8-3M 18-8-3M 18-8-3M 19 TITANIUM HARDFACED TITANIUM11 MONEL HARDFACED MONEL 20 TITANIUM TITANIUM TITANIUM12 18-8-3M HARDFACED 18-8-3M 21 INCONEL INCONEL INCONEL13 ALLOY 20 ALLOY 20 ALLOY 20 22 INCONEL HARDFACED INCONEL14 HASTELLOY HASTELLOY HASTELLOY 23 347 HARDFACED 347
50 SPECIAL SPECIAL SPECIAL
F - END CONNECTION
C - PRESSURE RATING01 - 1/4″ 09 - 21/2″ 18 - 12″ 28 - 28″ 0 - 150 6 - 80002 - 3/8″ 10 - 3″ 19 - 14″ 30 - 30″ 1 - 300 7 - 90003 - 1/2″ 11 - 31/2″ 20 - 16″ 32 - 32″ 2 - 600 8 - 169004 - 3/4″ 12 - 4″ 21 - 18″ 34 - 34″ 3 - 1500 9 - 268005 - 1″ 13 - 5″ 22 - 20″ 36 - 36″ 4 - 2500 x - SPECIAL06 - 11/4″ 14 - 6″ 23 - 22″ 42 - 42″ 5 - 450007 - 11/2″ 15 - 8″ 24 - 24″ 48 - 48″08 - 2″ 16 -10″ 26 - 26″ 99 - SPECIAL
A - TYPE OF VALVE
B - SIZE
D - BONNET CONNECTION E - PORT
G - BODY MATERIAL
H - TRIM MATERIAL
I - OPERATORS
01 - FLEX WEDGE 20 - VERTICAL (T) 30 - TILTING DISC02 - SPLIT WEDGE 21 - VERTICAL STOP CHECK 31 - SWING03 - SOLID WEDGE 22 - Y-PATTERN 32 - LIFT04 - DOUBLE DISC PARALLEL SEAT 23 - Y-PATTERN STOP CHECK 33 - LIFT ANGLE05 - CONDUIT 24 - ANGLE 34 - LIFT (Y)
25 - ANGLE STOP CHECK 35 - REVERSE CURRENT26 - ELBOW DOWN 36 - WAFER27 - ELBOW DOWN STOP CHECK 37 - BALL
P - PRESSURE SEAL BONNET C - CONVENTIONAL (B16.34) B - BUTTWELD T - THREADEDB - BOLTED BONNET F - FULL PORT F - FLANGED H - HUBE - EXTENDED BONNET R - REDUCED PORT R - FLANGED, RING JOINT C - COMBINATIONW - WELDED BONNET S - SOCKET WELD X - SPECIALS - BELLOW SEAL BONNET
M - MANUAL L - LEVER Q - SPECIALP - PNEUMATIC H - HYDRAULICE - ELECTRIC B - BARE STEMG - GEAR S - SPECIAL
CAST CARBON STEEL CAST CHROME STEEL CAST STAINLESS STEEL & ALLOYS02 - ASTM A216 WCB 10 - ASTM A217 WC6 (11/4 CR) 20 - ASTM A351 CF8M (316) 31 - ASTM A351 CK3MCUN 45 - TITANIUM (ASTM B367)03 - ASTM A216 WCC 11 - ASTM A217 WC9 ( 21/4 CR) 21 - ASTM A351 CF10M (316H) 32 - ASTM A351 CDMCu 46 - ZIRCONIUM (ASTM B493)04 - ASTM A352 LCB 12 - ASTM A217 C-5 (5 CR) 22 - ASTM A351 CF3M (316L) 33 - ASTM A351 CK20 47 - NICKEL (A494 CW12MW)05 - ASTM A352 LCC 13 - ASTM A217 C-12 (9 CR) 23 - ASTM A351 CF8C (347) 34 - ASTM A351 CK20 (310) 48 - INCONEL 625 (CW6MC)06 - ASTM A352 LC1 14 - ASTM A217 C-12A (9ACR) 24 - ASTM A351 CF10C (347H) 36 - ASTM A743 CA6NM (13-4) 49 - INCONEL 800 (CT15C)07 - ASTM A352 LC2 15 - ASTM A217 CCA15 (13 CR) 25 - ASTM A351 CF3C (347L) 37 - STAINLESS STEEL 904L 50 - INCONEL 825 (CU5MCuC)08 - ASTM A352 LC3 26 - ASTM A351 CF8 (304) 40 - ALLOY 20 51 - ASTM A890 1A
27 - ASTM A351 CF10 (304H) 41 - HASTELLOY B (A494 N12MV) 52 - ASTM A890 2A28 - ASTM A351 CF3 (304L) 42 - HASTELLOY C (A494 CW2M) 53 - ASTM A890 3A29 - ASTM A351 CG8M (317) 43 - MONEL (A494 M35-1) 54 - ASTM A890 4A30 - ASTM A351 CG3M (317L) 44 - INCONEL 600 (CY40) 55 - ASTM A890 5A
75 - SPECIAL
A B C D E F G H I JNote: HF-Acid valves are not included
on this order form.
HOW TO ORDER DIRECT SEAL VALVES- - - - - -
GATE
GLO
BE
CH
ECK
KCCDS0900
® ®
4
J - SPECIAL REQUIREMENTS
Direct Seal® critical service pressure seal Gate, Globe, Check, Stop Check and “Y”Pattern Globe valves are available in sizes 2″ to 48″ in pressure classes 150# – 2500#.Casting materials include: Carbon Steel, Chrome Moly, Stainless Steel, Alloy 20, Monel,Inconel and Hastelloy.
Direct Seal® valves are designed with pressure energized body-bonnet seal and withbody castings produced using the “Directional Solidification” process. Employing thisprocess results in casting quality which previously could only be achieved by forging.
The term “Directional Solidification” refers to a casting process in which the cooling rateof a valve body or other valve cast parts are controlled. Solidification occurs first at theregion most remote from the source of the feeding molten metal, or riser, then progressesin a controlled manner directionally toward the riser. This process eliminates anypossibility of the most damaging casting defect - centerline shrinkage.
Utilizing Directional Solidification, KITZ Direct Seal® valve body castings can be producedto exacting quality standards.
QUALITY
Valve body castings produce acceptance levels in all castable materials virtuallyeliminating any need to upgrade and are not subject to deterioration at heat affectedzone interfaces in sour gas services in refineries. Stress corrosion cracking and “reheatcracking” are eliminated by this process. Valve castings produced in this manner exceedeven forged part quality standards because they are equally strong at all axes and havefar better shaped flow contours, providing higher Cv.
DELIVERY
KITZ Direct Seal® valves can be delivered quickly due to the virtual elimination of theindeterminate nature of unknown casting upgrade cycles of welding and re-X-ray.Delivery schedules are also more dependable due to the elimination of any uncertaintyin the manufacturing process. Delivery is significantly less than those of other producersof critical service valves.
FEATURES AND BENEFITS
5
®
6
THE DIRECTIONAL SOLIDIFICATION PROCESS
KITZ DIRECT SEAL® valves are manufacturedutilizing a casting cooling process known asDirectional Solidification.
THE OLD WAY OF CASTING
Prior to the introduction of this process to valve manufacturing, valve body castings were produced by theprogressive solidification method shown in Figure 1.
When the feed channels to the source of molten metal areblocked by random crystal formation, uniformly thickcasting walls are subject to centerline shrinkage (SeeFigure 2).
PHASE 1 As dendrites begin to grow into the still liquid interior, the feeding of interspaces is still possible.
PHASE 2 As dendrite peaks come into contact with each other, the flow of the metal is restricted.
PHASE 3 Cavities begin to form due to the constrictions of the feed channels by the dendrites.
OUR CASTING PROCESS TODAY
The Directional Solidification process can berepresented by the stepped wedge shown in Figure 3.
It is easy to realize that the thinnest portions of the wedgemost remote from the feeding riser will cool first, followedby the next thickest section.
In this manner, the portions of the casting solidifying firstare never deprived of makeup metal to replace thecontracting volume.
DIRECT SEAL® valves using Directional Solidificationtechnology meet and exceed industry quality standards.
Figure 4: Tapered section walls cause the solidification process to begin at the thinnest section part of the mold (Directional Solidification).
As the dendritic crystals form, the cavities which theyform can still be penetrated and filled by the molten metal.
������
yyyyyy
������
yyyyyy
������
yyyyyy
������
yyyyyy���
�
���
��
���
���
��
Figure 1: Solidification begins at the mold wall and progresses outward. As the molten metal cools, dendrite crystals are formed.
Figure 2: Shrinkage occurs when the feed channels are blocked by the constriction caused by the forming dendrites.
�y
Figure 3: Solidification occurs from heat escaping through the mold wall. Heat extraction depends on the surface to volume ratio.
Stepped wedgeMoltenmetalfeeder(riser)
Sand
Liquid
Solidified skin
Residualmelt
width ofsolidification
Shrinkage cavities
Sand
minwall Feeding route
Liquid
Advancing solidification
Uniformvalve wallthickness
4x
4x3x
3x2x
2xx
x Solidified
Dendriticcrystals
Mushy
Fluid
After 1 min After 4 min After 9 min After 16 min
®QUALITY VALVES
7
GATE, GLOBE & CHECK DIRECT SEAL® VALVES
PRESSURE SEAL
DESIGN STANDARDS
• Pressure/Temperature: ASME B16.34• Face-to-Face: ASME B16.10• Flange: ASME B16.5• Butt weld: ASME B16.25• API-600 Appendix A Style A
INSPECTION & TESTING
• Shell & Seat: API 598, MSS SP-61, ASME B16.34
MATERIALS
• Pressure containing: Carbon Steel, Chrome Moly,Stainless Steel or other exotic alloys for hot hydrogen service, 254SMO valves
• Trim: Nace
APPLICATIONS
• Hydro Cracker • Full Port Pressure• Hydrotreater Seal Valves Available• Hydrogen Service• Feed Pump Stop Check
8
SEPARATE YOKEAND BONNET
“Y” GLOBE
ANGLE LIFT CHECK
BODY GUIDED DISK
EGMENTALETAINING
RING
PACER RING
FLEX. WEDGE ORPARALLEL DISCAVAILABLE
GATE
SWING CHECK TILTING DISC VERTICAL LIFT CHECK
SUPERIORCASTING QUALITY
DIFFERENTIAL ANGLEBETWEEN SEAL ANDRING BONNET
4 ANGLE FOR OPTIMIZEDEALING AT ALL PRESSURES &
TEMPERATURES
“Y” GLOBE CHECK
SILVER OR GOLDPLATED SEAL RING
STAINLESS STEELINLAY FOR SEALINTEGRITY
STELLITE OVERLAYSEAT AND DISC
↵
↵
A
A
↵
↵
A
A
↵
↵
A
A
↵
↵
A
A
↵
↵
A
A
↵
↵
A
A
↵
↵
A
A
↵
↵
A
A
A - A
ADDITIONAL TAPERFOR DIRECTIONAL SOLIDIFICATION AND VERTICAL STIFFNESS
GATE VALVES CONFORM TO API-600 APPENDIX A STYLE A
ONNET
STELLITE GUIDESON BODY AND DISC
GLOBE
PRESSURE SEALGASKET ARRANGEMENT
Caution: After installation and the valve is subject to working pressureand temperature, we recommend that the bonnet draw bolts bechecked for tightness. This will insure that the bonnet does notdrop and compromise the pressure seal integrity.
PRESSURE SEAL
* Dimension center to top in open position.** Larger sizes are supplied with gear actuators as standard.
Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.
9
A
D
B
Class 600 Class 900 Class 1500 Class 2500
inmm
25021/2653
804
1006
1508
20010
25012
30014
35016
40018
45020
50024
600
15.63397
20.25514
21.75552
27.75705
35.75908
43.88111552.13132460.36153365.63166773.25
86.44219695.562427
112.502858
B/W
73
88
163
372
662
1060
1396
1835
2527
5000
7500
10000
SEATPORT2.0051
2.0051
2.6367
3.4487
5.191326.501657.882009.75248
10.25260
13.00330
14.25362
15.75400
19.00483
BUTTWELD8.50216
10.00254
12.00305
14.00355
20.00508
26.00660
31.00787
36.00914
39.00991
43.00109243.00109247.00119456.001422
15.63397
15.63397
22.50572
28.13715
36.75933
44.50113054.00137261.50156265.88167374.50189286.44219695.562427112.502858
B/W
55
60
119
188
490
854
1210
1790
2495
3130
5000
SEATPORT2.0051
2.0051
2.6367
3.4487
5.191326.501657.882009.75248
10.25260
13.00330
14.25362
15.75400
19.00483
BUTTWELD8.50216
10.00254
12.00305
16.00406
22.00559
28.00711
34.00864
39.00991
42.00106747.00119453.00134658.001473
15.63397
21.50546
23.25591
28.50724
38.50978
44.75113755.38140762.25158167.75172175.75192489.13226494.692405113.382880
B/W55
114
146
296
697
1215
1987
2753
3270
4240
5000
7500
10000
SEATPORT2.0051
2.0051
2.6367
3.4487
5.191326.501657.882009.75248
10.25260
11.75298
13.25337
14.75375
17.75451
BUTTWELD7.001788.50216
10.00254
12.00305
18.00457
23.00584
28.00711
32.00813
35.00889
39.00991
43.00109247.00119455.001397
BUTTWELD11.00279
13.00330
14.25362
18.00457
24.00610
30.00762
36.00914
41.00104144.00111849.00124555.001397
15.44392
21.75552
23.25591
27.38695
37.50953
44.00111854.50138461.50156266.75169574.50189285.75217889.182265
104.02642
B/W45
100
150
201
521
793
1365
2136
3265
3900
7000
7500
13000
SEATPORT1.5038
1.7544
2.1354
2.6367
4.251085.381376.501658.002038.00203
10.00254
10.50267
12.13308
14.50368
Size A B D Weight A B* D Weight A B* D Weight A B* D Weight
®
GATE VALVESDIMENSIONS & WEIGHTS
Class 600 – 900 – 1500 – 25002″ – 24″
Double disk parallel seat valvesavailable in same dimensions,weights and pressure classes.
**
PRESSURE SEAL
* Dimension center to top in open position.** Larger sizes are supplied with gear actuators as standard.
Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.
10
®
Stop check valves available insame dimensions, weights andpressure classes.
B
D
A
Class 600 Class 900 Class 1500 Class 2500
inmm
25021/2653
804
1006
1508
20010
25012
30014
35016
40018
45020
50024
600
17.13435
16.25413
18.25464
22.50572
31.25794
26.00660
31.00787
33.00838
35.00889
39.009918
B/W55
60
90
188
451
726
1195
1771
2543
3566
SEATPORT1.8848
2.2557
2.7570
3.5390
5.001276.671697.75197
10.50267
12.38314
14.75375
BUTTWELD10.00254
10.00254
15.00381
18.00457
24.00610
29.00737
33.00838
38.00965
40.50102944.50130
17.13435
17.13435
21.75552
25.38645
34.50876
40.75103546.25117554.25137862.25158170.131781
B/W100
100
132
253
695
1168
1826
2782
3562
4781
SEATPORT1.8848
2.2557
2.7570
3.5390
5.001275.501407.751978.75222
10.25260
12.75324
BUTTWELD10.00254
16.25413
18.50470
21.50546
27.75705
32.75832
39.00991
44.50113049.50125754.501384
17.13435
19.50495
22.00559
26.34669
36.25921
47.50120751.25130258.50148666.25168376.001930
B/W100
114
197
341
778
1546
2512
3232
4650
6000
SEATPORT1.8848
2.2557
2.7570
3.5390
5.001275.501407.001788.382138.38213
11.75298
BUTTWELD10.00254
13.00330
14.00356
17.00432
22.00559
26.00660
31.00787
33.00838
35.00889
39.00991
BUTTWELD14.50368
20.00508
22.75578
26.50673
36.00914
40.25102250.00127056.00142256.00142260.001524
23.69602
19.25489
21.75552
26.50673
35.75908
45.50115649.50125757.75146769.25175960.001524
B/W228
124
242
431
952
1891
4140
4500
4500
7000
SEATPORT1.3835
1.8848
1.8848
2.1354
3.8899
5.001275.881497.751978.382139.75248
Size A B D Weight A B* D Weight A B* D Weight A B* D Weight
GLOBE VALVESDIMENSIONS & WEIGHTS
Class 600 – 900 – 1500 – 25002″ – 24″
**
PRESSURE SEAL
* Dimension center to top in open position.** Larger sizes are supplied with gear actuators as standard.
Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.
11
®
Stop check valves available insame dimensions, weights andpressure classes.
Class 600 Class 900 Class 1500 Class 2500
inmm
25021/2653
804
1006
1508
20010
25012
30014
35016
40018
45020
50024
600
25.25641
25.25641
25.25641
32.25819
36.25921
42.50108049.13124858.25148066.50168974.00188078.001981117.882994
B/W
102
125
273
425
687
1136
1682
2413
3382
3402
4536
6169
SEATPORT
2.0051
2.2557
2.2557
4.631187.001788.632198.382139.50241
10.38264
13.00330
14.75375
BUTTWELD
14.50368
14.50368
16.00406
24.00610
29.00737
33.00838
38.00838
40.50102944.50113058.00147355.00139759.001511
25.25641
25.25641
25.25641
35.00889
41.00104147.00119455.00139763.00160071.00180374.00188078.001981117.882994
B/W
225
225
275
657
1136
1736
2743
3952
5394
7500
10000
13600
SEATPORT
2.2557
2.2557
2.2557
4.631187.001788.632198.382139.50241
10.38264
13.00330
14.75375
15.75400
BUTTWELD
14.50368
14.50368
16.00406
27.75705
32.75832
39.00991
44.50113049.50125754.50138458.00147355.00139759.501511
25.25641
25.25641
25.25641
37.52953
48.75123852.25132759.13150267.25170874.50189274.00188078.001981117.882994
B/W
225
225
275
738
1465
2384
3075
4422
6078
7500
10000
13600
SEATPORT
2.2557
2.2557
2.2557
4.631177.001788.632198.382139.50241
10.38264
13.00330
14.75375
15.75400
BUTTWELD
14.50368
14.50368
16.00406
22.00559
26.00660
31.00787
33.00838
35.00889
39.00991
58.00147355.00139759.501511
BUTTWELD
14.50368
14.50368
18.00457
36.00914
40.25102250.00127056.00142260.00152448.75123858.00147358.001473
25.25641
25.25641
25.25641
38.00965
49.00124552.00132159.00149968.00172761.00154978.00198178.001981
B/W
225
225
275
853
1782
2916
3741
5463
6000
12000
12000
SEATPORT
2.2557
2.2557
2.2557
3.7595
5.751467.251848.632198.63219
10.38264
12.25311
13.00330
Size A B D Weight A B* D Weight A B* D Weight A B* D Weight
B
A
D
"Y" GLOBE VALVESDIMENSIONS & WEIGHTS
Class 600 – 900 – 1500 – 25002″ – 24″
**
PRESSURE SEAL
* Dimension center to top in open position.
Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.
12
®
B
D
A
Class 600 Class 900 Class 1500 Class 2500
inmm
25021/2653
804
1006
1508
20010
25012
30014
35016
40018
45020
50024
600
6.501656.751717.251849.25235
13.25337
15.25387
18.75476
20.25514
22.50572
25.50648
B/W45
52
69
132
318
561
996
1451
2216
3089
SEATPORT1.8848
2.2557
2.7570
3.5390
5.001276.671697.751978.75222
10.25260
12.75324
BUTTWELD10.00254
10.00254
15.00381
18.00457
24.00610
29.00737
33.00838
38.00965
40.50102944.501130
6.501656.50165
10.38264
11.50292
15.25387
18.50470
22.25565
24.50662
27.75705
30.25768
B/W55
60
96
172
432
834
1278
1867
3186
4325
SEATPORT1.8848
2.2557
2.7570
3.5390
5.001276.671697.751978.75222
10.25260
12.75324
BUTTWELD10.00254
16.50419
18.50470
21.50546
27.75705
32.75832
39.00991
44.50113049.001257
6.501658.752229.50241
11.25286
14.75375
19.25489
23.50596
27.25692
28.50724
B/W68
87
132
231
543
1027
1698
2235
3483
SEATPORT1.8848
2.2557
2.7570
3.5390
5.001275.501407.001788.75222
10.25260
BUTTWELD10.00254
13.00330
14.00356
17.00432
22.00559
26.00660
31.00787
33.00838
35.00889
39.00991
BUTTWELD11.00279
20.00508
22.75578
26.50673
36.00914
40.25102250.00127056.001422
9.132329.50241
11.75298
12.25311
16.50419
20.25514
22.25565
24.75629
B/W87
96
169
312
635
1273
2233
2897
SEATPORT2.2557
2.2557
2.2557
2.8873
3.8899
5.001275.88149
Size A B D Weight A B* D Weight A B* D Weight A B* D Weight
LIFT CHECK VALVESDIMENSIONS & WEIGHTS
Class 600 – 900 – 1500 – 25002″ – 24″
PRESSURE SEAL
* Dimension center to top in open position.
Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.
13
®
SWING CHECK VALVESDIMENSIONS & WEIGHTS
Class 600 – 900 – 1500 – 25002″ – 24″
Class 600 Class 900 Class 1500 Class 2500
inmm
25021/2653
804
1006
1508
20010
25012
30014
35016
40018
45020
50024
600
6.501658.502168.502167.251849.50241
12.25311
13.75349
16.00406
17.25438
18.75476
22.18563
23.37594
29.25743
B/W45
68
70
81
201
476
763
1023
1325
1730
1803
2290
3264
SEATPORT1.7544
2.7570
2.7570
3.0076
5.001276.251597.501919.502419.50241
11.00279
12.50318
14.00356
16.75425
BUTTWELD10.00254
10.00254
12.00305
14.00356
20.00508
26.00660
31.00787
36.00914
39.00991
43.00109243.00109247.00119447.001194
6.501658.502168.502167.501919.50241
12.50316
14.25362
16.50419
16.88429
19.25489
23.00584
23.37594
29.25743
B/W45
68
70
98
246
543
897
1389
1752
2315
3975
5050
7195
SEATPORT1.7544
2.7570
2.7570
3.0076
5.001276.251597.501919.502419.50241
11.00279
12.50318
14.00356
16.75425
BUTTWELD8.50216
10.00254
12.00305
16.00406
22.00559
28.00711
34.00864
39.00991
42.00106747.00119443.00109247.00119447.001194
6.501658.502168.502167.501919.75246
12.50316
13.75349
16.25413
23.80605
29.00737
23.00584
23.37594
29.25743
B/W45
68
132
218
365
684
1263
1752
2950
3200
4170
5305
7395
SEATPORT1.7544
2.7570
2.7570
3.0076
5.001276.251597.501919.502419.50241
11.00279
12.50318
14.00356
16.75425
BUTTWELD8.502168.50216
10.00254
12.00305
18.00457
23.00584
28.00711
32.00813
35.00889
39.00991
43.00109247.00119455.001397
BUTTWELD11.00279
13.00330
14.50368
18.00457
24.00610
30.00762
36.00914
41.00104139.00991
43.00109244.00111848.00121955.001397
6.501656.501658.562177.501919.75246
12.50316
13.75349
16.25413
23.13587
29.62752
25.68652
28.38721
29.25743
B/W45
100
150
301
521
793
1365
2136
3265
3900
7000
7500
13000
SEATPORT1.5038
1.5038
2.2557
2.7570
4.001025.001276.251597.501917.501919.50241
10.50267
11.50292
13.75350
Size A B D Weight A B* D Weight A B* D Weight A B* D Weight
B
D
A
PRESSURE SEAL
* Dimension center to top in open position.
Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.
14
®
B
D
A
Class 600 Class 900 Class 1500 Class 2500
inmm
25021/2653
804
1006
1508
20010
25012
30014
35016
40018
45020
50024
600
6.501658.502168.502167.251849.50241
12.25311
13.75349
16.00406
17.25438
18.75476
22.18563
23.37594
29.25743
B/W45
68
70
81
201
476
763
1023
1325
1730
1803
2290
3264
SEATPORT1.7544
2.7570
2.7570
3.0076
5.001276.251597.501919.502419.50241
11.00279
12.50318
14.00356
16.75425
BUTTWELD10.00254
10.00254
12.00305
14.00356
20.00508
26.00660
31.00787
36.00914
39.00991
43.00109243.00109247.00119447.001194
6.501658.502168.502167.501919.50241
12.50316
14.25362
16.50419
16.88429
19.25489
23.00584
23.37594
29.25743
B/W45
68
70
98
246
543
897
1389
1752
2315
3975
5050
7195
SEATPORT1.7544
2.7570
2.7570
3.0076
5.001276.251597.501919.502419.50241
11.00279
12.50318
14.00356
16.75425
BUTTWELD8.50216
10.00254
12.00305
16.00406
22.00559
28.00711
34.00864
39.00991
42.00106747.00119443.00109247.00119447.001194
6.501658.502168.502167.501919.75246
12.50316
13.75349
16.25413
23.80605
29.00737
23.00584
23.37594
29.25743
B/W45
68
132
218
365
684
1263
1752
2950
3200
4170
5305
7395
SEATPORT1.7544
2.7570
2.7570
3.0076
5.001276.251597.501919.502419.50241
11.00279
12.50318
14.00356
16.75425
BUTTWELD8.502168.50216
10.00254
12.00305
18.00457
23.00584
28.00711
32.00813
35.00889
39.00991
43.00109247.00119455.001397
BUTTWELD11.00279
13.00330
14.50368
18.00457
24.00610
30.00762
36.00914
41.00104139.00941
43.00109244.00118
48.00121955.001397
6.501656.501658.562177.501919.75246
12.50316
13.75349
16.25413
23.13587
29.62752
25.68652
28.38721
29.25743
B/W45
100
150
301
521
793
1365
2136
3265
3900
7000
7500
13000
SEATPORT1.5038
1.5038
2.2557
2.7570
4.001025.001276.251597.501917.501919.50241
10.50267
11.50292
13.75350
Size A B D Weight A B* D Weight A B* D Weight A B* D Weight
TILTING DISK VALVESDIMENSIONS & WEIGHTS
Class 600 – 900 – 1500 – 25002″ – 24″
GATE, GLOBE & CHECK DIRECT SEAL® VALVES
BOLTED BONNET
DESIGN STANDARDS
• Pressure/Temperature: ASME B16.34• API-600• Face-to-Face: ASME B16.10• Flange: ASME B16.5• Butt weld: ASME B16.25
INSPECTION & TESTING
• Shell & Seat: API 598, MSS SP-61, ASME B16.34
MATERIALS
• Pressure containing: Any corrosion resistant high alloy material including Inconel, Monel, Nickel, Hastelloy,Alloy 20, Duplex Stainless.
• Trim: Nace
APPLICATIONS
• Phosgene Isolation• HF Acid• Oxygen Service Valves• Hydrotreater• HPI Industry
®QUALITY VALVES
15
BOLTED BONNET
GATE VALVESClass 150–300–600–900–1500
1/2″ – 48″
16
BODY MATERIAL
• Alloy 20 • Nickel
• Chromes • Stainless Steel
• Hastelloy • Titanium
• Inconel • WCB
• Monel • Special
DESIGN STANDARDS
• Pressure/Temperature: ASME B16.34
• API 600
• Face-to-Face: ASME B16.10
• Flange: ASME B16.5
• Buttweld: ASME B16.25
INSPECTION & TESTING
• Shell & Seat: API 598, MSS SP-61,ASME B16.34
FEATURES AND BENEFITS
• Bonnet and body joint precision machined for accurate fit. Fully enclosed gasket.
• Universal trim constructed in CR13, Hardfaced, 18-8-3M, Monel, Hastelloy, Duplex SS, Alloy 20,and Titanium suitable for all applications.
• Seat face stellited, ground and lapped to a mirrorfinish.
• Non-rotating stem with precision Acme threads andburnished finish.
• Flexible wedge with low center stem-wedge contact, in solid materials ground and lapped to amirror finish. Wedge is tightly guidedto prevent dragging and seat damage.
• Gland is constructed in two pieces for easy alignment.
• Flanges: Class 150-300 1/16″ raised faceClass 600-900-1500 1/4″ raised face
A
D
B
C
®
17
BOLTED BONNET
GATE VALVESDIMENSIONS & WEIGHTS
Class 150 Class 300 Class 600
* Dimension center to top in open position.
Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.♦ Contact KCA for 900# and 1500# dimensions.
inmm
1/2103/4151
2511/2402
5021/2653
804
1006
1508
20010
25012
30014
35016
40018
45020
50022
55024
60026
65028
70030
75032
80034
85036
90042
105048
1200
FLANGE
6.501656.501656.501656.801738.502169.50241
11.12282
12.00305
15.88403
16.50419
18.00457
19.75502
22.50572
24.00610
26.00660
28.00711
30.00762
32.00813
34.00864
36.00914
36.00914
38.00965
40.00101640.00101644.001118
9.002299.002299.00229
14.00356
15.25387
16.62422
18.88480
22.13562
31.00787
37.62956
46.88119156.75144161.38155968.75174673.25186182.88210590.50229996.002438111.002819119.003027
124.253156
130.003302
138.503518
146.683726
166.504229
189.914821
HANDWHEEL
5.001275.001275.001278.002038.002038.00203
10.00254
10.00254
14.00356
18.00457
20.00508
20.00508
24.00610
24.00610
30.00762
30.00762
36.00914
36.00914
36.00914
36.00914
36.00914
36.00914
36.00914
36.00914
48.00121948.004821
FLG
8
8
8
30
42
50
67
97
180
278
456
646
875
1120
1485
1825
2575
2870
3675
3850
3975
4850
5500
5950
10000
14000
SEATPORT
0.5013
0.7519
1.0025
1.5038
2.0051
2.5064
3.0076
4.001026.001528.00203
10.00254
12.00305
13.25337
15.25387
17.25438
19.25489
21.25540
23.25591
25.25648
27.25692
29.25743
31.25794
33.25845
35.25895
40.25102246.001168
BUTT WELD
4.181064.181064.181067.001788.502169.50241
11.12283
12.00305
15.87403
16.50419
18.00457
19.75502
30.00762
33.00838
36.00914
39.00991
43.00109245.00114349.00124553.00134655.00139760.00152464.00162668.001727
FLANGE
6.501656.501656.501657.501918.502169.50241
11.12283
12.00305
15.87403
16.50419
18.00457
19.75502
30.00762
33.00838
36.00914
39.00991
43.00109245.00114349.00124553.00134655.00139760.00152464.00162668.001727
6.501656.501656.501657.50191
15.25387
16.62422
20.00508
23.38594
32.25819
40.81103749.12124859.38150861.38155968.75174677.88197886.50219794.002388
101.252572
108.502756117.502985
123.813145
128.003251
132.003353
147.813754
HANDWHEEL
5.001275.001275.001278.002038.002038.00203
10.00254
10.00254
14.00356
18.00457
20.00508
20.00508
24.00610
30.00762
36.00914
36.00914
36.00914
36.00914
36.00914
36.00914
36.00914
36.00914
36.00914
36.00914
40.00101648.001219
FLG
8
8
8
35
46
55
90
136
245
415
646
900
1392
1870
2405
3260
3800
4250
5750
6500
7500
9500
11500
13500
SEATPORT
0.5013
0.7519
1.0025
1.5038
2.0051
2.5064
3.0076
4.001026.001528.00203
10.00254
12.00305
13.25337
15.25387
17.00432
19.00483
21.00533
23.00584
25.00635
27.00686
29.00737
31.00787
33.00838
35.00895
40.00101646.001168
BUTT WELD
4.181064.181064.181069.50241
11.50292
13.00330
14.00356
17.00432
22.00559
26.00660
31.00787
33.00838
35.00889
39.00991
43.00109247.00119451.00129555.00139755.00139756.00142256.00142256.00142268.00172768.001727
FLANGE
6.501657.501918.502169.50241
11.50292
13.00330
14.00356
17.00432
22.00559
26.00660
31.00787
33.00838
35.00889
39.00991
43.00109247.00119451.00129555.00139755.00139756.00142256.00142256.00142268.00172768.001727
9.002299.002299.00229
14.00356
15.38391
18.75476
21.62549
25.87657
36.37924
43.87111449.00124560.87154672.50184282.25208987.062211
102.502604
108.002743114.752915117.502985
120.253061
122.503112
131.253334
139.503543
145.133686
HANDWHEEL
8.002038.002038.002038.002038.00203
10.00254
10.00254
14.00356
20.00508
24.00610
30.00762
30.00762
36.00900
36.00900
36.00914
36.00914
36.00914
36.00914
36.00914
36.00914
36.00914
36.00914
36.00914
36.00914
40.00101648.001219
FLG
8
8
8
45
60
89
130
224
394
726
1125
1490
2200
3000
4000
5600
7200
8000
9500
11000
12000
13500
15000
17000
SEATPORT
0.5013
0.7519
1.0025
1.5038
2.0051
2.5064
3.0076
4.001026.001528.00203
10.00254
12.00305
12.88327
14.75375
16.50419
18.25464
20.12511
22.00559
23.75603
25.50648
27.37629
30.50775
32.50826
34.50737
39.00991
46.001168
BUTT WELD
4.181064.181064.181066.501657.001787.501918.002039.00229
10.50267
11.50297
13.00330
14.00356
15.00381
16.00406
17.00432
18.00457
20.00508
20.00508
22.00559
24.00610
24.00610
28.00711
30.00762
30.00762
31.00787
Size A B* C D Weight A B* C D Weight A B* C D Weight
®
BOLTED BONNET
GLOBE VALVESClass 150–300–600–900–1500
1/2″ – 20″
BODY MATERIAL
• Alloy 20 • Nickel
• Chromes • Stainless Steel
• Hastelloy • Titanium
• Inconel • WCB
• Monel • Special
DESIGN STANDARDS
• Pressure/Temperature: ASME B16.34
• Face-to-Face: ASME B16.10
• Flange: ASME B16.5
• Buttweld: ASME B16.25
INSPECTION & TESTING
• Shell & Seat: API 598, MSS SP-61ASME B16.34
FEATURES AND BENEFITS
• Bonnet and body castings are precision machined.One-piece bonnet design for better alignment andfewer parts.
• Bonnet and body joint accurately machined. Fullyenclosed gasket.
• Universal trim constructed in CR13, Hardfaced, 18-8-3M, Monel, Hastelloy, Duplex SS, Alloy 20,and Titanium suitable for all applications.
• Seat face stellited, ground and lapped to a mirrorfinish.
• Flat disc. Body guided floating stem-disc engagement, hardfaced with CR13 Stellite, Duplex SS, or Monel, ground and lapped with seat.
• Tapered disc. Body guided disc, hardfaced withCR13, Stellite, Duplex or Monel, ground and lapped with seat.
• Stem with precision Acme threads and burnished finish.
• Gland is constructed in two pieces for easy alignment.
• Flanges: Class 150-300 1/16″ raised faceClass 600-900-1500 1/4″ raised face
• Impactor handwheels offer the most economicalmechanism for tight shut off. Two lugs cast under the wheel when struck simultaneously, gives significantly greater closing force than standard wheels.
C
B
D
A
18
®
Class 150 Class 300 Class 600
inmm
1/2103/4151
2511/2402
5021/2653
804
1006
1508
20010
25012
30014
35016
40018
45020
500
BUTT WELD
2.8873
3.2583
3.5089
5.001278.002038.502169.50241
11.50292
16.00406
19.50495
24.50622
27.50699
31.00787
36.00914
38.50660
38.50660
FLANGE
4.251084.621175.001276.501658.002038.502169.50241
11.50292
16.00406
19.50495
24.50622
27.50699
31.00787
36.00914
38.50660
38.50660
HANDWHEEL
4.001024.001024.001026.001528.00203
10.00254
10.00254
14.00356
24.00610
24.00610
24.00610
24.00610
26.00650
28.00700
36.00914
36.00914
FLG
4
4
4
32
48
54
82
120
240
405
500
1050
1700
2300
2900
3400
SEATPORT
0.5013
0.7519
1.0025
1.5038
2.0051
2.5064
3.0076
4.001026.001528.00203
10.00254
12.00305
13.25337
15.25387
15.50394
17.25438
BUTTWELD
2.8873
3.2583
3.5089
5.00127
10.50267
11.50292
12.50318
14.00356
17.50445
22.00559
24.50622
28.00711
33.00838
34.00863
49.00124554.001372
FLANGE
4.251084.621175.001276.50645
10.50267
11.50292
12.50318
14.00356
17.50445
22.00559
24.50622
28.00711
33.00 838
34.00863
49.00124554.001372
4.501144.501146.601688.10206
15.00381
15.44392
16.88429
19.31491
23.56598
35.88911
39.81101144.06111953.31135457.32145660.00152463.751619
HANDWHEEL
4.001024.001024.001026.001528.00203
10.00254
10.00254
14.00356
24.00610
24.00610
24.00610
26.0065028.00700
30.00762
36.00914
36.00914
FLG
4
4
4
32
45
63
88
130
261
447
1000
1300
1800
2300
3100
3500
SEATPORT
0.5013
0.7519
1.0025
1.5038
2.0051
2.5064
3.0076
4.001026.001528.00203
10.00254
12.00305
13.25337
15.25387
15.50394
17.25438
BUTTWELD
4.001025.001276.001527.00178
11.50292
13.00330
14.00356
17.00432
22.00559
26.00660
31.00787
33.00838
35.00889
39.00991
43.00109247.001194
FLANGE
6.501657.501918.502169.50241
11.50292
13.00330
14.00356
17.00432
22.00559
26.00660
31.00787
33.00838
35.00889
39.00991
43.00109247.001194
7.902018.10206
10.20259
11.00279
15.00381
17.37441
19.37492
23.00584
31.50800
42.50108047.00119449.00124554.00137656.00142264.00162668.001727
HANDWHEEL
4.001024.001024.001026.00152
10.00254
10.00254
14.00356
24.00610
24.00610
24.00650
24.00650
24.00650
24.00650
36.00914
36.00914
36.00914
FLG
8
11
21
31
60
89
130
213
415
1050
1400
1800
2200
3700
4500
5500
SEATPORT
0.5013
0.7519
1.0025
1.5038
2.0051
2.5064
3.0076
4.001026.001527.882008.77223
10.57268
11.58294
13.25337
14.80376
16.50419
4.501144.501146.601688.10206
15.00381
15.44392
16.88429
19.31491
23.56598
25.75654
35.15892
40.87103853.31135457.32145660.00152
63.751619
Size A B* C D Weight A B* C D Weight A B* C D Weight
19
BOLTED BONNET
GLOBE VALVESDIMENSIONS & WEIGHTS
* Dimension center to top in open position.
Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.♦ Valves above 6″ are gear operated.♦ Contact KCA for 900# and 1500# dimensions.
®
BOLTED BONNET
SWING CHECK VALVESClass 150–300–600–900–1500
1/2″ – 48″
20
BODY MATERIAL
• Alloy 20 • Nickel
• Chromes • Stainless Steel
• Hastelloy • Titanium
• Inconel • WCB
• Monel • Special
DESIGN STANDARDS
• Pressure/Temperature: ASME B16.34
• Face-to-Face: ASME B16.10
• Flange: ASME B16.5
• Buttweld: ASME B16.25
INSPECTION & TESTING
• Shell & Seat: API 598, MSS SP-61ASME B16.34
FEATURES AND BENEFITS
• Hinge mechanism is totally internal. There are nobody penetrations.
• Body and cover joint are accurately machined witha fully enclosed gasket
• Discs are constructed in a one piece design towithstand the severe shock of check valve service. Hardfaced in CR13, Stellite, Duplex SS, or Monel,ground and lapped to a mirror finish.
• Disc assembly. Discs are secured to the disc hanger with a lock nut and cotter pin. This allowsthe disc to rotate freely in order to prevent localized wear. All parts are easily accessible for servicing.
• Flanges: Class 150-300 1/16″ raised faceClass 600-900-1500 1/4″ raised face
D
A
B
®
21
BOLTED BONNET
SWING CHECK VALVESDIMENSIONS & WEIGHTS
Class 600Class 300Class 150
inmm
1/2153/4201
2511/2402
5021/2653
804
1006
1508
20010
25012
30014
35016
40018
45020
50022
55024
60026
65028
70030
75032
80034
85036
90042
105048
1200
BUTT WELD
4.251084.631185.001276.501658.002038.502169.50241
11.50292
14.00356
19.50495
24.50622
27.50699
31.00787
34.00457
38.50978
38.50978
42.00106751.00129551.00129557.00144860.00152460.00152464.00162677.001956
FLANGE
4.251084.631185.001276.501658.002038.502169.50241
11.50292
14.00356
19.50495
24.50622
27.50699
31.00787
34.00457
38.50978
38.50978
42.00106751.00129551.00129557.00144860.00152460.00152464.00162677.001956
2.5665
2.7570
2.8873
3.5089
5.751466.131567.631948.63219
10.75273
12.75324
15.38391
16.88429
19.63499
22.00559
25.00635
26.50673
28.75730
31.25794
33.50851
36.00914
37.00940
38.50978
39.75101041.881064
CV
95
150
220
410
950
1750
2800
4100
6200
8400
11000
13500
17500
20000
25750
30000
33000
39500
44500
48000
FLG
6
7
8
14
31
35
59
98
179
314
513
602
765
1120
1450
1700
2500
2900
3600
3950
4275
4500
4800
5125
SEATPORT
0.5013
0.7519
1.0025
1.5038
2.0051
2.5064
3.0076
4.001026.001528.00203
10.00254
12.00305
13.25337
15.25387
17.13435
19.00483
21.25540
23.25591
25.25641
27.25692
29.75743
31.25794
33.25945
35.25895
BUTT WELD
6.001527.001788.502039.50229
10.50267
11.50292
12.50318
14.00356
17.50445
21.00533
24.50622
28.00711
33.00838
34.00864
38.50978
40.00101644.00111853.00134653.00134659.00149962.75159468.00172776.00193082.002083
FLANGE
6.001527.001788.502039.502298.502169.50241
11.12283
12.00305
15.87403
16.50419
18.00457
19.75502
30.00 762
33.00838
38.50978
40.00101644.00111853.00134653.00134659.00149962.75159468.00172776.00193082.002083
3.0076
3.1981
3.4487
4.061036.001526.251597.631948.63219
10.75273
12.75324
16.13410
17.00432
19.63499
22.50572
25.00635
26.50673
28.75730
31.25794
33.00838
35.25895
37.00940
38.50978
39.75101041.881064
CV
95
150
220
410
950
1750
2800
4100
6200
8400
11000
13500
17500
20000
25250
29250
33000
41000
46500
53000
FLG
8
13
15
27
37
49
70
110
204
360
582
825
1200
1500
1700
2200
2400
2825
3000
3425
3875
4225
4625
4925
SEATPORT
0.5013
0.7519
1.0025
1.5038
2.0051
2.5064
3.0076
4.001026.001528.00203
10.00254
12.00305
13.25337
15.25387
17.13435
19.00483
21.00533
23.25591
25.00635
27.00686
29.75743
31.00787
33.00838
35.25895
BUTT WELD
11.50292
13.00330
14.00356
17.00432
22.00559
26.00660
31.00787
33.00838
35.00889
39.00991
43.00109247.00119451.00129555.00139757.00144863.00160065.00165170.00177876.00193082.002083
FLANGE
11.50292
13.00330
14.00356
17.00432
22.00559
26.00660
31.00787
33.00838
35.00889
39.00991
43.00109247.00119451.00129555.00139757.00144863.00160065.00165170.00177876.00193082.002083
6.251596.381628.632199.13232
11.50292
13.50343
16.37416
18.13461
20.93532
23.38594
24.00610
26.00660
28.75730
30.50775
32.00813
34.25870
36.00914
38.25972
40.75103542.001067
Cv
95
150
220
410
950
1750
2800
4100
5900
7800
9900
12000
15700
18000
22750
26250
30250
39750
45000
50750
SEATPORT
2.0051
2.5064
3.0076
4.001026.001527.88200
10.00254
12.00305
12.88327
14.75375
16.50419
18.25464
20.12511
22.00559
23.75603
25.50648
27.37695
30.50775
32.50826
34.50876
FLG
52
59
96
167
332
525
1000
1500
1750
2400
3200
4500
5500
6400
7300
9275
10500
12100
13300
14750
Size A B* D Weight A B* D Weight A B* D Weight
* Dimension center to top in open position.
Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.♦ Contact KCA for 900# and 1500# dimensions.
®
22
GEAR OPERATOR PNEUMATIC ACTUATOR
ELECTRIC ACTUATOR
Gear operators are usually applied to valves to makethe operation of opening and closing the valveseasier. KITZ uses the bevel gear actuator on valvesabove 16″ 300# due to the size, and weight of thevalve as well as considering the pressure and theflow coefficient of these larger valves.
Gear Sizing: 70% of cold working pressure unlessotherwise specified.50% of cold working pressure for highalloy steels unless otherwise specified.
Pneumatic actuator valve stems serve as a pistonrod with a disc fastened directly to them. Tail rodsare also supplied as standard to serve asposition indicators and for emergency opening.Handwheels and gear heads can be mounted ontop of the cylinder for emergency operation whichmay arise due to loss of air in the cylinder.
Electric actuators may be used on valves of almostany size in various positions and locations.Electric actuators, whether installed directly on anaxle or on a floor stand, can be operated manuallyin case of a power failure.
OPERATOR OPTIONS
®
23
Size KITZ manufactures valves in sizes up to 48″ andpressure classes up to ASME 2500# to meet allyour application needs.
CastingKITZ valves pass the strictest radiographicX-ray analysis.
Engineering KITZ engineers can design valves to conform toyour exact specifications.
InspectionKITZ carefully inspects our valves to ensure defectfree valves for long and reliable service life.
TestingKITZ provides underwater testing to assure leak free service and reliability.
®QUALITY VALVES
ISO 9001 Certified Since 1989
KITZ CORPORATION OF AMERICA10750 CORPORATE DRIVE • STAFFORD TEXAS 77477 U.S.A.
PHONE (281) 491-7333 TOLL FREE (800) 772-0073 FACSIMILE (281) 491-9402
Visit our web site at: www.kitz.com
–– Distributed by ––
CAUTIONPressure-temperature ratings and other performance data publishedin this catalog have been developed from our design calculation, in-house testing, field reports provided by our customers and/orpublished official standards or specifications. They are good only tocover typical applications as a general guideline to users of KITZproducts introduced in this catalog.
For any specific application, users are kindly requested to contactKITZ Corporation for technical advice, or to carry out their own studyand evaluation for proving suitability of these products to such anapplication. Failure to follow this request could result in propertydamage and/or personal injury, for which we shall not be liable.
While this catalog has been compiled with the utmost care, weassume no responsibility for errors, impropriety or inadequacy. Anyinformation provided in this catalog is subject to change withoutnotice for error rectification, product discontinuation, designmodification, new product introduction or any other cause that KITZCorporation considers necessary. This edition cancels all previousissues.
!
®