Post on 10-Mar-2018
transcript
DIS TRANPACKAGED SUBSTATIONS
A pre-fabricated, factory-built bus conductor assembly, ready to simply bolt into place
DIS-TRAN PFB
Your project done your way, right the first time, every time
”“DIS-TRAN’s bus was delivered to our site ready
to be installed and worked perfectly. The drawings and instructions provided were amazing. Instead of taking a month, we finished installing all our bus in less than a week, in brutal winter conditions.
– Investor-Owned Utility
When building or updating a substation, you don’t fabricate, cut, perforate or weld the structures out in the field.
So why do you do that with the bus?
Simplify and reduce field labor requirements Installation requires only a stable foundation, no field fitting or customization required.
Increase schedule certainty Factory fabrication eliminates the effect of “bad weather days” and other uncontrollable factors on-site.
Eliminate dependencies that create liabilities Reduce reliance on scarce, expensive, and often non-local specialty craft (like aluminum welding).
Shift risk away from the substation Move high-risk construction activities into a factory setting with controlled environmental and safety conditions.
Reduce labor and total installed costs With improved production efficiency and reduced specialty skillsets required at the jobsite.
Meet uncompromising performance standards Through heightened quality processes in a managed factory setting, with QA/QC performed on each assembly prior to delivery.
Pinpoint improved accuracy with standard inputs Breakthrough 3D modeling technologies enable greater precision with normal measurement inputs.
The DIS-TRAN PFB collapses costs, timelines and risks with zero compromise in performance or project flexibility, whether you have a brown-field or green-field project, a high-seismic site or a blustery wind
farm, a small distribution substation or a major 500kV switchyard.
DIS-TRAN has been an industry leader in the design and supply of high-voltage, open-air substations and switchyards since 1965. We emphasize a collaborative approach that’s conducive to completing your project done your way, right the first time, every time. At each phase from development through close-out, we deliver innovative designs, efficient material logistics and profitable partnering strategies. We fuse exceptional technical expertise with fast, friendly service standards, so that every project can spark greater success.
4725 Highway 28 East, Pineville, Louisiana 71360
distransubstations.com substations@distran.com (318) 448-0274
Who We Are
What if the bus assembly, manufactured to precise specifications, could arrive on-site, ready to install
with little-to-zero field welding?
The DIS-TRAN PFB is a complete electrical conductor assembly, custom-constructed
to exacting end-user specifications in a controlled manufacturing environment.
It arrives on your job site ready to slip into place with little-to-no field fabrication
or welding required.
It uses industry-standard, high-voltage conductor components and can satisfy any
project performance requirements while integrating seamlessly into the balance
of your substation project.
DIS-TRAN PFB
v1.5