· Div. of MFZ Ventures, Inc. 3333 W. 48th Place Chicago, Illinois 60632 (773) 247-4611 main (773)...

Post on 23-Aug-2020

0 views 0 download

transcript

Page 1 of 2 219

Aluminum Case Co.

Div. of MFZ Ventures, Inc. 3333 W. 48th Place

Chicago, Illinois 60632 (773) 247-4611 main (773) 247-8376 fax

www.aluminumcaseco.com

MODEL 219

Case Style: Style “C” Valance Design – Riveted Construction Dimensions: 21” L x 13” W x 9” H

L = left-to-right dimension W = back-to-front dimension H = top-to-bottom dimension

Material: .040 5052 H34 (or H32) Aluminum – Satin (Mill) Finish Features: ◊ Manufactured in America (Chicago, IL) with aluminum that was

melted, rolled and processed in the United States ◊ Valance (Extrusion) – at Joining Ends [Aluminum] ◊ Continuous Hinge [Aluminum] – Full Length ◊ Tubular Handle [Plated Steel] ◊ Two (2) Cover Stays [Plated Steel] ◊ Two (2) Locking Drawbolts [Plated Steel] ◊ Eight (8) Reinforced Corners [Plated Steel] ◊ Four (4) Plastic Bumpers – Hinge Side

Photos:

1436

Aluminum Case Co.

Div. of MFZ Ventures, Inc.

3333 W. 48th Place Chicago, Illinois 60632

(773) 247-4611 main (773) 247-8376 fax

www.aluminumcaseco.com

MODEL 1436 – STORAGE / TOOL CHEST Case Style: Case / Tool Chest – ALL WELDED Construction

Sizes: 36” L x 22” W x 24” H

L = left-to-right dimension W = back-to-front dimension H = top-to-bottom dimension

Material: .090 5052 H32 Aluminum (11 GA.) – Satin (Mill) Finish

Standard Features: Manufactured in America (Chicago, IL) with aluminum that was melted, rolled and processed in the United States

Piano Hinge – Full Length [Aluminum]

Two (2) Side Handles – Each End (4 total) w/ 90 Stop [Plated Steel]

Padlock Hasp (1) – Front Center [Plated Steel]

Twist Latches( 2) – Front [Plated Steel]

Weather Resistant Seal [Neoprene Gasket]

Sash Chain Cover Stay [Plated Steel] Options: Caster / Wheel Kit Photographs:

1460

Aluminum Case Co.

Div. of MFZ Ventures, Inc.

3333 W. 48th Place Chicago, Illinois 60632

(773) 247-4611 main (773) 247-8376 fax

www.aluminumcaseco.com

MODEL 1460 STORAGE / TOOL CHEST Case Style: Case / Tool Chest – ALL WELDED Construction

Sizes: 60” L x 22” W x 24” H

L = left-to-right dimension W = back-to-front dimension H = top-to-bottom dimension

Material: .090 5052 H32 Aluminum (11 GA.) – Satin (Mill) Finish

Standard Features: Manufactured in America (Chicago, IL) with aluminum that was melted, rolled and processed in the United States

Piano Hinge – Full Length [Aluminum]

Two(2) Side Handles – Each End (4 total) w/ 90 Stop [Plated Steel]

Padlock Hasp(1) – Front Center [Plated Steel]

Twist Latches(4) – Front [Plated Steel]

Weather Resistant Seal [Neoprene Gasket]

Sash Chain Cover Stay [Plated Steel] Photographs:

Page 1 of 2 2136

Aluminum Case Co. [Div.: BY-LO MFG., Inc.] 3333 W. 48th Place

Chicago, Illinois 60632 (773) 247-4611 main (773) 247-8376 fax

www.aluminumcaseco.com

MODEL 2136 STORAGE / TOOL CHEST

Case Style: All-Welded Construction Dimensions: 36” L x 17 1/2” W x 14 1/2” H

L = left-to-right dimension W = back-to-front dimension H = top-to-bottom dimension

Material: .050 5052 H32 Aluminum – Satin (Mill) Finish Features: ◊ Manufactured in America (Chicago, IL) with aluminum that was

melted, rolled and processed in the United States ◊ Side Handles – One(1) Each End [Plated Steel] ◊ Continuous Hinge – Full Length [Aluminum] ◊ One(1) Drawbolt (w/ lock) – Center Front [Plated Steel]

◊ Two(2) Drawbolts (no locks) – Front [Plated Steel] ◊ Weather Resistant Seal [Neoprene Gasket] ◊ Cover Stay / Lanyard [Nylon Coated Stainless Steel]

Photos:

Aluminum Case Co. Page 1 of 2 5185

Aluminum Case Co. [Div.: BY-LO MFG., Inc.] 3333 W. 48th Place

Chicago, Illinois 60632 (773) 247-4611 main (773) 247-8376 fax

www.aluminumcaseco.com

MODEL 5185

Case Style: Style “B” ¾” Overlap Design – Riveted Construction Dimensions: 19” L x 12 3/4” W x 12 1/4” H

L = left-to-right dimension W = back-to-front dimension H = top-to-bottom dimension

Material: .050 5052 H32 Aluminum – Satin (Mill) Finish Features: ◊ Manufactured in America (Chicago, IL) with aluminum that was

melted, rolled and processed in the United States ◊ Continuous Hinge [Aluminum] – Full Length

◊ One(1) Side Handle – Each End w/ 90° Stop [Plated Steel] ◊ Two (2) Drawbolts (w/ locks) – Front [Plated Steel] ◊ Six(6) Corners – Cover(2) / Bottom(4) [Plated Steel] ◊ Cardholder(1) [Plated Steel]

Photos:

Page 1 of 2 MODEL 5580

Aluminum Case Co.

Div. of MFZ Ventures, Inc. 3333 W. 48th Place

Chicago, Illinois 60632 (773) 247-4611 main (773) 247-8376 fax

www.aluminumcaseco.com

MODEL 5580

Case Style: Style “B” ¾” Overlap Design – Riveted Construction Dimensions: 27” L x 17” W x 9” H

L = left-to-right dimension W = back-to-front dimension H = top-to-bottom dimension

Material: .050 5052 H32 Aluminum – Satin (Mill) Finish Features: ◊ Manufactured in America (Chicago, IL) with aluminum that was

melted, rolled and processed in the United States ◊ Tubular Handle [Plated Steel] ◊ Continuous Hinge [Aluminum] – Full Length

◊ Two(2) Drawbolts w/ locks – Front [Plated Steel] ◊ Six(6) Corners – Cover(2) / Bottom(4) [Plated Steel] ◊ Glides(4) – Bottom [Plated Steel]

Photos: