Post on 18-Apr-2020
transcript
Dimension L W H
2X2 ft 23.8'' 23.8'' 0.43''
Application
Offices, Warehouse, Healthcare facilities, Workshops, Schools, Airport, Subway, Hospitals, Factories,
Retail stores, Other area lighting
FEATURES0-10V Dimming
100V~
277V
AC
50000hr
DIMENSION
45.5mm35mm
FPS22-40L-XXK-D10
Driver protected by junction box, attached to the back of the panel, more secure and stable.
Screw nuts embeded in the back plate achieve all kinds of feasible installation methods.
Outperforms fluorescent lighting, outstanding energy saving.
Lead free and eco-friendly, zero maintenance.
PHOTOS OF THE PRODUCT
100-277VNon-dimming
PARAMETERS
100-277V0-10V dimming
Front View Back View
LED PANEL LIGHT
Safety cable(Optional accessory)
Earthquake clip(Standard accessory)
Surface mounted kit(Optional accessory)
FPS22-40L-XXK-D10 FPS22-40L-XXK-D10
SMD2835 0.2W
Size
LGP
Diffuser
Back Plate
IP Ratings
Installation
LED Type
LED Supplier
LED Chips
LED Quantity
CRI
CCT
Light Efficiency
SDCM
Lumen Output
Beam Angle
2*2 ft
3mm, PS, ENTIRE
PS
IP20
Recessed, Suspended, Wall-mounted
Xuyu, Jufei, Runlite
Epistar, Sanan
192 pcs
>80 Ra
2700K-5000K
110lm/w(±5%)
<6
4400lm(±5%)
>110°
0.6mm Galvanized plate
Wattage
Input Voltage
Input Current
Frequency
Output Voltage
Dimmable
PF
THD
Driver Brand
Driver Model
Operation Temp
Package
Certificates
Life Span
Warranty
40W(±5%)
100-277V
1000mA
50/60Hz
DC27-42V
>0.9
0-10V Dimming
<20%
LIFUD
-20°C~45°C
4 pcs/ ctn
UL/DLC
>50000 hours
5 years
LF-GMD045YB(P)1000U
LED PANEL LIGHT
DISTRIBUTION CURVE FLUX
CONNECTION MODE
Non-dimmable wiring diagram 0-10V Dimmable
LED PANEL
LUMINOUS DECAY GRAPH
Ground wire
L
N
black
white
driver
Luminous Intensity Distribution Diagram
Quantity: 2pcs/carton
N.W: 8 kg
G.W: 10 kg
Carton Size: L690xW120xH700mm
PACKING INFORMATION
INSTALLATION INTRODUCTION
Suspended
Recessed
Mounted
Standard accessory
with 4pcs for 2x2,1x4 &
6pcs for 2x4 panel
Optional accessory,
need to order
separately
Optional accessory,
need to order
separately
Model No.:SUSPKITSize:4pcs 1m cable/set Housing:Steel
Color:Silver
Size:L65xW70xH0.7mm Housing:SGCC
Color:Silver
Model No.:2X2SMK Size:L609xW603xH60mm Housing:Aluminum Color:Ra 9016
The LED panel light is intended for illuminating indoor areas; it may be installed and used only in dry, enclosed indoor rooms. Please observe
the specification carefully at all times! Our products complies with the applicable national and American requirements.
MAINTENANCE AND CARE
The product does not require any maintenance. You should never take it apart. The LED used are permanently installed; they cannot be replaced.
Before cleaning the product it must be disconnected from the power supply. Unplug the mains plug from the power supply or switch off the
mains voltage.
Do not press too strongly on the diffuser plate of the LED panel as this may cause scratches or other damage.
Dust can easily be removed using a clean, soft brush and a vacuum cleaner.
*Please consult with our sales engineers for .detailed installation instruction
Installation method Drawing Accessory required Description Remarks
Packaged by EPE 2pcs panels/ctn
2pcs panels/ctn
LED PANEL LIGHT