Post on 03-Apr-2020
transcript
Downhole Drilling MotorsTo meet the most stringent of directional well applications, we offer a full suite of conventional and performance mud motors.
Motor Sizes
All sizes available
Features
• Versatility of power sections with various lobe configurations for
different speed and torque parameters
• Zero to 3 adjustable bent housing
• Fixed bent housings available
• Motor stabilizations available
• Mud lubricated bearings assemblies and sealed bearing assemblies available
• Threaded rotor catch system
• Rotor/stator fits available for different temperature applications
prodirectional.com | 800.204.0009
MWD/Gamma Services We ensure that our MWD tools are easily assembled in the field, making the configuration process seamless to operate in a variety of downhole conditions.
Operating Environment
Maximum Working Pressure 20,000 PSI Pulsation Dampeners charged to proper specifications Flow Range 100 - 1,200 GPM Pressure Drop Across Tool Approx. 160 PSI at 450 GPM w/water Mud Type Full range Mud Pump Duplex or triplex Max L.C.M. 3/8” diameter Sand Content .25% max. Temperature Range 175°C max. Surface Mud Screen Recommended Float Valve Required below probe
System Operation
Toolface Update Rates Selected from 7 to 28 seconds MTF/GTF Crossover Operator selectable Survey Time 65 - 160 seconds Battery Life 450 Hrs – 600 Hrs. Pulse Type Positive Survey Trigger Stop and restart mud pumps Down Link Change between 4 modes of operation Sensor Measurement Point 18’ from bottom of UBHO
Data Specifications Parameters Data Range Resolution Inclination 0 - 180 0.1 Azimuth 0 - 360 0.1 Magnetic Toolface 0 - 360 0.5 Gravity Toolface 0 - 360 +/- 180 0.5 Probe Temperature 0 - 350 1.5 Magnetic Dip -90 - 90 0.1 Total Magnetic Field 0.0 - 1.0 gauss 100 gauss Total Gravity 0.0 - 2.0 G’s 0.1 G’s Continuous Inclination 10 – 180 0.2
Probe Dimensions O.D. Length Weight 2.250” Centralizer 26 ft 150 lbs 1.875” Pressure Barrels
Gamma Ray Specifications
Performance Sensitivity 1.0 counts per API Accuracy +/- 3% Count Rate Change - 25C to 177C Thin-bed Resolution 6.8” (in 8” hole diameter, at 50% points)
Environmental Survival Temperature 185°C Max Heat / Cool Rate 5°F / minute Vibration (3 axis) 50-300 Hz 30 G. RMS Random Spectrum Shock (Z-axis) 500 G, 0.5 mS. Shock (X or Y axis) 1000 G, 0.5 mS.
prodirectional.com | 936.441.7266
HEAT Series - Directional Module
The Harsh Environment Advanced Technology Directional Module is a ruggedized MWD System to combat today’s
harshest drilling environments. Engineered for utmost quality and reliability, using advanced sensor technology, this
directional module is a full featured true-to-spec system. Including the control module, it has the capability to measure
precise drilling dynamics, mud flow, and rotation for drilling optimization and unmatched reliability up to 185°C.
prodirectional.com | 936-441-7266
Key Features:
Digital Directional Module
o MWD Microcontroller/Microprocessor
o 24 bit ADC for precise 6-axis survey capability
o On-board storage for calibration coefficients
o Shock, Vibration, and Temperature Sensors
Smart power management and efficient battery switching
Multiple communication protocols supported
Real-time Shock and Vibration
Dynamic sequencing (rotating/sliding frames)
High accuracy drilling mechanics
o Continuous Inclination
o Continuous Azimuth
o RPM Measurement
o Stick/Slip Indication
Flow and rotation downlink capability
Configurable tool orientation and axis notation
Internal logging capability
o Operational time and environmental history
o Lifetime Environmental history
Electrical, Mechanical, and Performance Specifications: Environmental Specifications:
Length 29” Parameter Maximum
Survivable Temperature -40°C to 185°C Inclination Accuracy ±0.10°
Vibration, Random 20g RMS, 10-1000 Hz Azimuth Accuracy ±0.50°
Shock 500g, 1mSec, half-sine Dip Angle Spread 0.4°
Operating Range 18V-32V Toolface Accuracy ±0.2°
Current @ 28V 125mA max Total g Field Spread 2.5 mg
Memory Capacity 24MB Total Magnetic Field 250 nT
HEAT Series MWD ProShock Stop
The ProShock Stop is a proprietary bi-directional shock absorber which isolates vital MWD tool components from damaging axial (Z axis) shock and vibration.
prodirectional.com | 936-441-7266
Features Reduces mechanical wear at pulser lower end and
orientation sleeve interface Axial shock reduction up to 75% 300 hour runtime interval Anti-Rotation Mechanism – Ensures directional
control/orientation
Dimensions OD 2.00” Length 24.00” Weight 16 lbs
Environmental Specifications
Survival Temperature 200°C Operating Temperature 185°C Drilling Mud All Mud Types
MWD / Pressure While Drilling
We ensure that our MWD tools are easily assembled in the field, making the configuration process seamless to operate in a variety of downhole conditions.
Features Real time and logged downhole Annulus and Bore Pressure measurement Equivalent Circulation Density (ECD) calculation Differential Pressure calculation Near Bit Temperature Loss Circulation Detection due to fracturing of the formation or poor hole cleaning Kick Detection due to influx of water, gas, oil Real time pressure monitoring for underbalanced drilling applications
Performance Annular Pressure (max) 20,000 psi Bore Pressure (max) 25,000 psi Annular Pressure Accuracy +/- 0.02 % Full Scale Bore Pressure Accuracy +/- 0.05 % Full Scale Temperature Compensation Yes
System Operation Data Sample Rate 1 second Resolution (real time) <3 psi Resolution (memory) 1 psi Log Memory Capacity 4 MB Log Memory Run Time 1,600 hours MPT using GVs GV0-GV7 Platform Compatibility Tensor-Based MWD Tools
Data Specifications Resolution (real time) <3 psi Resolution (memory) 1 psi Log Memory Capacity 4 MB Log Memory Run Time 1,600 hours Timestamp Yes
Electrical Specifications Input Voltage (min) 12 Volts Input Voltage (max) 52 Volts Supply Current (typ) 23 mA
Probe Dimensions O.D. Length Weight 1.875” Pressure Barrel 5.5 ft. 40 lbs.
Environmental Survival Temperature 185°C Operating Temperature 175°C Max Heat / Cool Rate 5°F / minute Vibration (3 axis) 50-300 Hz 30 G. RMS
Shock (Z-axis) 500 G, 0.5 mS. Shock (X or Y axis) 1000 G, 0.5 mS. Maximum Operating Pressure 20,000 psi
800.204.0009 prodirectional.com I 936.441.7266
Survey Management
The rapid development of unconventional reservoirs has highlighted the benefits of wellbores being intentionally positioned in close proximity to one another. This, combined with the economic and environmental benefits of increased well density on each pad, has led operators to place a greater focus on the quality and precision of wellbore surveying. Recognizing the need for enhanced survey accuracy in order to reduce the chance of a collision, ProDirectional has worked with industry leaders to establish a team of Survey Management specialists that can meet the challenge of improved wellbore accuracy head on.
Working with all members of drilling operations, ProDirectional’s Survey Management team employs industry accepted standards to accurately position the wellbore and greatly reduce the risk of collision with another well.
prodirectional.com | 936-441-7266
Services Provided:
Pre and post drilling checks of all wellbore positioning data
Advanced QA/QC techniques for survey data
Eliminate magnetic interference from both crustal and BHA
sources
Modeling of BHA bending tendencies to reduce inclination
errors (SAG)
Definitive end of well reporting with accurate survey
corrections