Durometers & StandsSmall Dial Durometer

Durometer Stand

Compliance withISO 7619 and ASTM D2240

J typeDigitalDurometer

Pocket type

Pocket type forsoft thin sheet

GS-615(Manual type)

GS-610(Electric type)

J2 typeDigitalDurometer

Total Length: 88.4mmWeight: 125gGS-719P(for natural rubber etc.)GS-709P(for soft plastic etc.)Strap can be put for easy carryand convenience

Total Length: 88.4mmWeight: 125gGS-779Gcan be used from 2.5mm thicksheets and for comparativehardness measurement

Quick and simple measurementwith ISO standard load

This is Automatic Constant Loaddurometer stand. The load andspeed are set with standardand measurement can bedone by touch button

Digital/Dial Durometer for using with Durometer stands

Pressure Foot: φ18mmGSD-719J-R Digital type AGSD-720J-R Digital type DGS-719R Dial type AGS-720R Dial type D

2010 Edition of New Products

Peak data holdfunction typeGraduation : 0.5GSD-719J(type A)GSD-720J(type D)18models are availableaccording to standards

Data hold function typeGraduation: 0.4GSD-719J2(type A)GSD-720J2(type D)15 models are availableaccording to standards

18ｍｍ

Compliance with ISO 7619 and ASTM D2240

Alignmentunit

The installation ofthe strap (option)is possible

Pressure Foot

Automatic Durometers

Dial Indicators

Thickness Gauges

Dial Test Indicators

One RevolutionDial Indicator

Auto-ReverseDial Test Indicator

Auto-Reverse Dial Test Indicatorlower measuring force series

GX-01 seriesAutomatic HardnessMeasuring SystemResolution: 0.1Output: RS-232CGX-01A(type A)GX-01D(type D)Compliance with ISO 7619, ASTM D2240 etc.,and can be used by interchangeableSensors. Peak hold, Timer hold, Tolerancejudgment and middle value measurementare applicable

GS-680 IRHD M-methodFull AutomaticMicro DurometerCompliance with ISO 48 Resolution: 0.1 IRHDMeasuring Accuracy: ±0.01 IRHDCan be applied for hardness measurementof O-ring, Rubber Sheet, small rubberparts etc. Data management can bedone through PC

2-10-3 Naruta-cho Okaya-shi NaganoPref. 394-0042 Japan TEL : 81-266-22-4911 FAX : 81-266-22-4914E-mail.teclock@teclock.co.jp http://www.teclock.co.jp/eng_index.html

Head office & Factory

2010 Edition of New Products

TM-35-04Small type Dial Indicatorwith 26mm stem lengthwhich can be used formeasurement at deepposition or placeGraduation: 0.01mmMeasuring Range: 5mm

TM-35-03Small type Dial Indicatorwith 15mm stem lengthwhich can be fixed withJigs etc. ,certainlyGraduation: 0.01mmMeasuring Range: 5mm

SM-125Graduation: 0.01mmMeasuring Range: 20mmMeasuring Deep: 200mm

LT-352-5 LT-353-5 LT-355-10 LT-358-15Graduation: 0.01mm 0.01mm 0.002mm 0.001mmMeasuring Range: 0.8mm 0.8mm 0.28mm 0.20mmMeasuring Force: 0.05N or less 0.05N or less 0.1N or less 0.15N or less

Small Dial Indicator

LT-353-5 LT-355-10 LT-358-15LT-352-5

LT-354Wide graduation typeGraduation: 0.01mmMeasuring Range: 0.5mm

TM-980.1mm one revolutionDial IndicatorGraduation: 0.1mmMeasuring range: 3.2mm

It can stand on its own with stand

Ⓑ10.10.2000