Post on 02-Oct-2020
transcript
/K3
/GEN5
Stable media loading/unloading. / High precision ink placement
High saturation printing with hi-speed drying system
Wide color gamut with smooth and vivid gradient color
In-line media loading/unloading system with high precision ink droplet delivering sharp image.
Multi-level setting dryer cater for high saturation printing requirement
Variable ink droplet with accurate color management for more vivid color, smooth gradient color printing
Industrial Printhead / High density ink printing
Kyocera 32Pass
/ M2
DYE - SUBLIMATION PRINTER
Ink
KYOCERA RICOH
IDP-LTKA-C LDP KA DISPERSE INK – CYAN IDP-LTRH-C LDP RH DISPERSE INK – CYAN
IDP-LTKA-M LDP KA DISPERSE INK – MAGENTA IDP-LTRH-M LDP RH DISPERSE INK – MAGENTA
IDP-LTKA-Y LDP KA DISPERSE INK – YELLOW IDP-LTRH-Y LDP RH DISPERSE INK – YELLOW
IDP-LTKA-K LDP KA DISPERSE INK – BLACK IDP-LTRH-K LDP RH DISPERSE INK – BLACK
IDP-LTKA-Lc LDP KA DISPERSE INK - LIGHT CYAN IDP-LTRH-Lc LDP RH DISPERSE INK - LIGHT CYAN
IDP-LTKA-Lm LDP KA DISPERSE INK - LIGHT MAGENTA IDP-LTRH-Lm LDP RH DISPERSE INK - LIGHT MAGENTA
IDP-LTDP-Clr LDP DISPERSE FLUSHING SOLUTION IDP-LTDP-Clr LDP DISPERSE FLUSHING SOLUTION
Media Information Dye-Sublimation inkjet transfer paper Width : 1.62m / Weight : 105g / Length : 150m
DYE – SUBHARDWARE CONFIGURATION
Print head Kyocera 3 / Ricoh 5 Max. Print width 1.6 M / 63 Inches Ink Disperse Ink
Print head 2Pass 4Pass 6Pass 8Pass Kyocera 3 1100 / 100 550 / 50 / / Ricoh 5 x 3 Row / 1276 / 116 902 / 82 693 / 63
Num of Head Kyocera / 2 to 4 Ricoh / 2 to 12 Colors 4 / 6 / 8 4 / 6 / 8 Auto cleaning system Yes Weight Net. weight 620KG ( 1367 lbs ) / Gross weight 970KG ( 2138 lbs ) Machine dimensions (cm) L 355 / W 119 / H 160 Packing dimensions (cm) L 372 / W 112 / H 187
Kyocera 3 Cyan / Magenta / Yellow / Black / Light Cyan / Light Magenta Ricoh 5 Cyan / Magenta / Yellow / Black / Light Cyan / Light Magenta
TECHNICAL SPECIFICATION Media handling Roll to roll with auto take up Media thickness Maximum 5mm Media roll weight Maximum 45Kg Print heads DOD piezo technology,automatic voltage and temperature control Working environment Temperature 20°C~28°C, Humidity 40%~70% (Recommended) Connection Interface USB 3.0 High Speed connection Software ONYX / CALDERA / PM6
Speed (sqft / m
2)
Power requirement Single Phase 220V + 10% (50/60Hz,AC) / 10A
Ink
Back
4F., No.577, Tanmei St., Neihu Dist., Taipei City 11484, TAIWANTEL : +886-227931912 FAX : +886-227931012 E-mail : sales@rip.com.tw