EANTC Interoperability Test and Showcase at MPLS + SDN ......ATN 910C ATN 980B Cloud Opera SDN-O...

Post on 28-Feb-2021

3 views 0 download

transcript

EANTC Interoperability Test and Showcase at MPLS + SDN + NFV World Congress 2017

Post Event Report

Upcoming Showcase 2018

The next edition of the MPLS + SDN + NFV World Congress will take place April 10-13, 2018.

The EANTC Hot Staging is planned for

March 5-16, 2018.

Please get in touch if you would like to join!

Participating Vendors 2017

Participating Devices

Vendor Arista Networks 7050SX

7280R Aviat Networks Microwave Radio

Calnex Paragon-X Paragon-t Sentinel

Cisco Nexus 7700 Nexus 93180 Nexus 9372 XR OS XE OS VTS

ECI Telecom NPT-1800

Vendor Ericsson MINI-LINK 6352

MINI-LINK 6691 IPOS Router Family

Huawei Agile Controller AR 1220E ATN 950C ATN 910C ATN 980B Cloud Opera SDN-O NE40E-M2H NE40E-X2-M8A NE40E-X2-M16A NE40E-X3A NE40E-X8A

Participating Devices

Vendor Ixia IxNetwork

Juniper Networks CSE 2000 MX 80 MX 104 MX 240 QFX 10002-36Q

Meinberg LANTIME M1000S LANTIME M4000

Microsemi TimeProvider 2700 TimeProvider 5000

Vendor Nokia Nokia 7750SR

Nokia NSP

RAD

ETX-2iB MiCLK

SIAE MICROELETTRONICA

AGS20

Spirent Communications

TestCenter N4U

2017 Test Coverage

Clock Synchronization Software Defined Networking (SDN) MPLS, Ethernet & Data Center Interconnect Microwave

Test Topology

Hot Staging Impressions

Public Event in Figures March 2017, Paris

Showcase 7 guided vendor tours with

40+ participants each time All 600 hard copies of the white paper

distributed Customer meeting point 4 showcase videos

Conference Record attendance in 2017 with

1.500+ participants 45% service provider participants More than 65 countries represented First worldwide event in the MPLS,

SDN and NFV area

Further Details & Results

32-page public white paper available free of charge www.eantc.de/en/showcases/mpls_sdn_2017

Showcase PR Noise 2017

About the European Advanced Networking Test Center

State of the art testing expertise focusing on innovative telecom technologies

Emulating fully realistic scenarios representative for today’s production networks

EANTC is 100% independent and vendor-neutral

Adhering to highest quality standards and actively participating in test methods standardization

Network Design, Proof of Concept

Testing and Audits for Service Providers

Acceptance Tests and Audits for

Enterprises

Testing and Certification for Vendors