®

N = Fv

cos ß

FR= µ . N

®

EJOT PT® type DG

Using screws on large surface aluminium/glass facades is an ongoing challenge. Technical approvals or system approach, become more important because of the structural requirements and high security standards in such constructions.

Features:

qself-tap and self-drill options in stainless steel grades A2 and A4

qasymmetrical thread flank, with a 30° thread an-gle sloped toward the bearing load

qengineered fastener core provides ideal material flow during thread forming

qhigh performance

Benefits:

qoverdrive security through asymmetrical thread flank design

qhigh pull-out and shear strength, due to large overlap of the thread flanks

qhigh resistance to vibration

The fastener for mechanical fixing of aluminium and clamp-connections, on aluminium/ glass facade systems

Typical applications:

qclamping aluminium profileqclamping aluminium cover platesq fixing mullion and transom sectionsq fixing ledge detailsqin particular; aluminium, zinc and magnesium

alloys

®

EJOT Baubefestigungen GmbH · In der Stockwiese 35 · D- 57334 Bad LaaspheTel. +49 27 52 908-740 · Fax +49 27 52 908-7408 · Internet: www.ejot.de · e-mail: fensterbau@ejot.de

®

EJOT Baubefestigungen GmbH · In der Stockwiese 35 · D- 57334 Bad LaaspheTel. +49 27 52 908-740 · Fax +49 27 52 908-7408 · Internet: www.ejot.com · e-mail: fensterbau@ejot.de

EJOT and application engineering:

qwe support our customers through an application engineering approach. Starting with the product development process

qexperienced technicians in the EJOT Applitec centre discuss the assembly of your components qas a manufacturer, EJOT have the ability to pro-

vide a technical assessment of your requirements and a subsequent bespoke solution

q we provide you with sound advice on optimal and rational fixing and installation techniques

Product outline:

qEJOT PT type DG screw is a custom-designed solution for profile construction in aluminium/glass façade applications

qavailable with different head designs, diameters, metal grades, thread length, fastener length and drive type

qin stock with Z-type or drill point, washered or un- washered

Different extrusion types in aluminium/ glass facades:

412-

E/1

.0/1

2.06