Post on 29-Jan-2021
transcript
10 Subject to technical modifications
Installation examples
Technical specifications
Max. 30 kg (66 lbs.)
Max. 3200 mm (10'5 31/32'')
Max. 600 mm (1'11 5/8'')
28–36 mm (1 3/32''–1 13/32'')
Fitting for 2–10 folding sliding shutters made of wood or metal up to 30 kg per shutter and 180 kg per system, with concealed running and guide tracks. Design Forslide, open at the bottom.
Product highlights
Aesthetics Harmonious combination of shutters and façade, since the running and guide tracks disappear behind the closed shutter
Flexibility Solution for any construction situation with doors of up to 1.2 m2 and 30 kg, even/odd number of doors and system width of up to 12 m
Cross reference
30 FS uo
11Subject to technical modifications
Cross reference
Set for folding packages
No.
Hawa Frontfold 30 FS, basic set right, guide track open at the bottom
27555
Hawa Frontfold 30 FS, basic set left, guide track open at the bottom
27556
Hawa Frontfold 30 FS, additional set, guide track open at the Bottom
27557
Set consisting of: 2755
5
2755
6
2755
7
No.
Fixed suspension, Forslide, folding to the right
1 27517
Running gear outside, Forslide, folding to the right
1 27519
Fixed guide, Forslide, folding to the right, guide track open at the bottom
1 27528
Outside guide, Forslide, folding to the right, guide track open at the bottom
1 27529
Cylinder screw, M8x100 mm, A4-70
4 4 2 27401
Hinge ring, plastic 2 2 1 15740
Hinge plate cranked, one-piece, stainless steel A4
4 4 27418
Fixed suspension, Forslide, folding to the left
1 27518
Running gear outside, Forslide, folding to the left
1 27520
Fixed guide, Forslide, folding to the left, guide track open at the bottom
1 27527
Outside guide, Forslide, folding to the left, guide track open at the bottom
1 27530
Centre running gear, Forslide
1 27521
Centre guide, Forslide, guide track open at the bottom
1 27531
Hinge plate cranked, two pieces, stainless steel A4
4 27419
30 FS uo
Set for uneven number of leafs
No.
Hawa Frontfold 30 FS uo, set for uneven number of leafs left
30164
Hawa Frontfold 30 FS uo, set for uneven number of leafs right
30167
Set consisting of: 3016
4
3016
7
No.
Fixed suspension, Forslide, folding to the left
1 27518
Fixed guide, Forslide, folding to the left, guide track open at the bottom
1 27527
Hinge plate cranked, one-piece, stainless steel A4
2 2 27418
Cylinder screw, M8x100 mm, A4-70
2 2 27401
Hinge ring, plastic 1 1 15740
Fixed suspension, Forslide, folding to the right
1 27517
Fixed guide, Forslide, folding to the right, guide track open at the bottom
1 27528
12 Subject to technical modifications
Accessories
No.
Tension latch, opening outwards, with steel cable, without fixing screws
27490
Tension latch, opening inwards, with steel cable, without fixing screws
27491
Rotary handle for tension latch, stainless steel
27458
Flat hinge, gap size 1–6 mm, stainless steel A4
27421
Cranked hinge, gap size 6 mm, stainless steel A4
27595
Hinge plate cranked, two pieces, stainless steel A4
27419
Hinge plate flat, two pieces, stainless steel A4
27420
Hinge pin A4 20187
Drilling jig for hinge, Ø 3mm for screw fixing, including threaded bolt
27551
Drilling jig for hinge, Ø 5mm for riveting, including threaded bolt
27552
Stop with adjusting screw, suita-ble for profile bar 8 mm from the espagnolette locking device
15899
Running track, mounted on ceiling
30 FS uo
Running tracks
mm (inch) No.
Running track, For slide, wall mounting, aluminum, anodized
6000 (19'8 7/32'')
27358
cut to size
27622
Running track, For slide, ceiling mounting, aluminum, anodized
6000 (19'8 7/32'')
27360
cut to size
27623
Guide tracks
mm (inch) No.
Guide track, wall mounting, aluminum, anodized
6000 (19'8 7/32'')
27364
cut to size
27625
Guide track, floor mounting, aluminum, anodized
6000 (19'8 7/32'')
27366
cut to size
27626
Guide track, narrow, aluminum, anodized
6000 (19'8 7/32'')
27368
cut to size
27627
13Subject to technical modifications
Planning folding packageCustomer installation of a wind support is recommended.
With an odd number of doors, the last door must be secured by the customer.
Ordering information– Type and number of sets – Type and number of hinges – Type and number of tension latches and rotary handles – Type and number of running tracks – Type and number of guide tracks
Optional ordering information– Type and number of drilling jigs – Order overview page 32–33
Planning/executionInstallation instructions No. 27510 have to be used for planning and execution. Further information about the product can be found on www.hawa.com.
Gap sizes
30 FS uo
Options folding hinges
Variant 1, flat hinge: Z = 1–6 mm Variant 2, cranked hinge: Z = 6 mm
Running gear and guide hingeWith folding sliding shutters more than 33 mm thick, the hinges must be embedded.
Height Quantity
up to 2000 mm 2
from 2001 mm 3
Number of hinges