Post on 19-Mar-2018
transcript
ENTElectrical Non-MetallicPipe & FittingsCorrugated flexible conduit used for electrical raceways.
Product Description 1
Benefits and Applications 2
Installation - Ident-A-Boxes® 3
ENT Dimensions and Specifications 4
ENT Coils, Reels and Lengths 5
ENT Fittings 7-10
Couplings, Connectors and Plugs 7
Stubbys, Slab Boxes and Lock Nut 8
Ident-A-Box® with Hub Extensions 9
Ident-A-Box® with Knockouts 10
Notes 11
Table ofContents
Note: This brochure is not intended to assume the authority of the Design Engineer. Actual jobsite conditions will vary significantly. The sole responsibility for all design and installation decisions lies with the Design Engineer. All local health and safety regulations must be followed.
1
Product Description & ApplicationsRoyal Building Products Electrical Solutions manufactures a complete line of Electrical Non-Metallic Tubing (ENT) pipe and fittings. Royal ENT is a corrugated flexible conduit that is used for electrical raceways. Royal Electrical Solutions ENT is available in 12mm - 50mm (½” - 2") diameters and packaged in reels, coils or 10' (3m) straight lengths.
Royal Electrical Solutions ENT is lightweight, durable and concrete tight; it is easy to pull cables and wires through the tubing. It can be installed in concrete slabs, fire-rated interior walls or direct buried. ENT pipe and fittings are used in many applications, including:
ManufacturingRoyal Building Products Electrical Solutions ENT pipe is manufactured in our facilities in Woodbridge, Ontario and Abbottsford, B.C. It is designed and tested to meet all necessary industry standards.
Labour SavingsRoyal Electrical Solutions ENT pipe is easy to install and simple to cut and join.
Reel SizesRoyal Electrical Solutions ENT pipe is available in coils, reels and 10' (3m) straight lengths. The large reels have up to 2,000ft (610m) of ENT on each and allow for long continuous runs, therefore saving time and money.
Light Weight MaterialRoyal Electrical Solutions ENT pipe is much lighter than electrical metallic tubing (EMT).
ENT Specifications
Corrugated InteriorThe inside of our Royal Electrical Solutions ENT is corrugated therefore reducing the build-up of friction compared to pulling cable through solid wall pipe.
Outside DiametersThe outside diameter of Royal Electrical Solutions ENT pipe is the same as the outside diameter of rigid PVC conduit. This allows for Rigid PVC Conduit fittings to be used with ENT.
ENTElectrical Non-MetallicPipe & FittingsCorrugated flexible conduit used for electrical raceways.
C22.2 No. 227.1 UL 1653
Certifications Royal Building Products Electrical Solutions complete line of ENT pipe and fittings are certified to CSA C22.2 No. 227.1/UL 1653.
FT-4 Rating Royal Electrical Solutions ENT has achieved the designation FT-4 Rating in accordance to the Vertical Char Test in CSA C22.2 No.227.1/UL 1653.
CodesOur ENT pipe and fittings can be used when installed according to the Canadian Electrical Code (CEC) Part I, Rules 12-1500 to 12-1514.
295440668970
1,1001,517
15 (0.574)20 (0.778)25 (1.000)34 (1.340)40 (1.574)51 (2.020)
21 (0.840)27 (1.050)33 (1.315)42 (1.660)48 (1.897)60 (2.375)
Nominal Size
mm (in)
ENTlb/1,000ft
EMTlb/1,000ft
Avg. InsideDiameter mm (in)
Avg. OutsideDiameter mm (in)
16 (½)21 (¾)27 (1)35 (1¼)41 (1½)53 (2)
100125175185220319
2
Concrete TightRoyal Electrical Solutions ENT pipe, boxes and fittings are concrete tight.
Corrosion ResistantENT pipe and fittings are non-metallic, therefore there is no risk of corrosion when exposed to naturally corrosive soil conditions, such as electrochemical and/or galvanic environments.
Direct BurialRoyal Electrical Solutions ENT can be direct buried according to Rule 12-1500(A) of the Canadian Electrical Code (CEC).
FittingsWe offer a complete line of fittings to be used with our ENT pipe. Fast, reliable concrete tight installations can be achieved with our snap-in couplings, connectors and adapters.
Quality Control & AssuranceRoyal Electrical Solutions ENT pipe and fittings undergo extensive testing and inspection in our manufacturing facilities.
InstallationCuttingRoyal Electrical Solutions ENT pipe can be easily cut using conduit
cutters, hacksaw or a fine-toothed handsaw. Deburr the cut end using a knife or file.
BendingENT pipe can be bent by hand, however, the bending radius must be at least six times the internal diameter of the tubing.
TyingAll ENT pipe should be tied down to the rebar, if it is being encased in concrete. Preventing the ENT pipe from floating to the top when the concrete is poured. Tie ENT pipe down using wire or tie wraps.
FittingsFor installation of fittings, insert the end of the ENT pipe into the fitting; ensure that 3 full corrugations snap into the fitting beyond the flexible tabs. 3-Click clip design allows for pipe to be easily disconnected and then re-connected.
Fire SeparationsIf ENT pipe passes through a fire rated separation, the penetration must be properly fire-stopped.
TransitionsRigid PVC Couplings can be used as a transition from ENT pipe to conduit. Follow the procedure below.
Procedure to Solvent Weld ENT• Do not use chemical primer or cleaner.• Apply uniform coat of solvent cement.• Use a brush to apply, not a dauber.• Brush excess cement out of corrugations.• While cement is wet, insert ENT into fitting until stop is reached and give tubing a quarter turn.• Do not disturb until joint is set.
Royal Electrical Solutions offers aadaptor to transition from ENT to EMT.
Diagram 2. ENT encased in a concrete application.
Diagram 1. ENT pipe attached with a coupling and tied to a rebar.
Diagram 3. ENT pipe and fittings in a High-Rise application.
3
Liberty Village Project; Shallow Single Gang Concrete Wall Box
ENT Electrical Non-Metallic Slab and Wall BoxesRoyal Building Products Electrical Solutions launches its latest ENT Wall Boxes with state of the art features and benefits sure to meet the needs of today’s contractor. ENT Wall Boxes are manufactured to to save time and money by eliminating the most common installation problems. The new ENT Wall Boxes are a perfect fit for all low or high-rise construction markets.
ManufacturingENT Slab Boxes contain an exterior clip that can be removed or replaced when required. It is easy to insert and won’t pull apart under rugged construction activities. It also features an additional angled nailing system to secure the box to the floor before the concrete is pourred. Royal Electrical Solutions Slab Box is manufactured with longer hubs using a 3-click insertion system to ensure a secure concrete tight fit.
ENT Boxes are all manufactured in a state-of-the-art facility and are designed and tested to meet all industry standards. Royal Building Products Electrical Solutions complete line of ENT Slab and Wall Boxes are lightweight, concrete tight and are non-corrosive and non-conductive lowering installation and life cycle costs.
Royal Building Products®Electrical Solutions Slab Boxeshubs are elevated to permit a larger diameter rebar.
Product Features
• External removable and replaceable clip rings
• 3-Click insertion depth for concrete tight fit
• 4-Prong locking system provides a stronger grip
• Durable and crush resistant
• Made from non-metallic and non-corrosive PVC and/or PC
• Slab Boxes have 6 different hub configurations
• Slab Boxes equipped with 8 optional nail or screw holes
• Slab Box hubs elevated permitting larger diameter rebar
• Slab Boxes are available with colored Ident-a-Box® Lids
• Single and Deep Gang Wall Boxes have a rigid PE Protective
Cover to prevent concrete infiltration
The Liberty Village project in Toronto, Ontario used Royal Electrical Solutions ENT pipe and fittings.
UL 514CC22.2 No. 18.2
Certifications Royal Building Products Electrical Solutions complete line of Electrical Non-Metallic (ENT) Boxes are certified to CSA C22.2, No. 18.2 and UL 514C. Royal Divider Plate (Product Code RSSBH-DC) is certified to CSA C22.2 No. 18.2, when used with Royal RSSB-H series slab boxes.
4
ENT Electrical Non-Metallic Slab Box SpecsBetter equipped with features to make the job easier for all projects.
1
2
7
3
4 5 6
Durable andCrush Resistant
4-Prong Locking System with3-click insertion depth
Equipped with 8 optional nail or screw holes
Removable and Replaceable Clip Rings
Ident-a-Box® Color LegendGrey: GenericGreen: Security, Cable, TelephoneWhite: Hydro - 600 VoltBlue: Hydro - 120 VoltYellow: Emergency & Lighting SignsRed: Fire Alarm
Types of Slab & Wall Boxes available:1. Slab Box2. Slab Box without Hubs3. Square Slab Box with Optional Divider Plate4. Shallow Slab Box5. Shallow Single Gang Concrete Wall Box6. Deep Single Gang Concrete Wall Box7. Ident-A-Box® Slab Box with specified colored lid
Slab Boxeswith removable PE Protective Cover
Divider Platecan be added at anytime
ENT Square Slab Box with Divider PlateRoyal Electrical Solutions introduces the latest addition to our ENT product line. The benefits of our current square ENT slab box can now be enhanced by our new optional Divider Plate, which is sold separately. The benefit of this divider plate is it can be added at anytime and is used to divide the box into 2 side-by-side sections.
The Divider Plate allows the contractor to use different voltages, or to include power plus CAT5 data cabling, telephone and stereo controls in the same box.
Divider Plate Features and Benefits:
• Combine line voltage/low voltage (data, telephone and
sound) in the same slab box.
• Combine 120vac and 6/12/24vdc for emergency lighting
• Divider plate can be added at anytime, without the use of tools
• Made from non-metallic and non-corrosive PVC
• Slab boxes come in 6 different hub configurations
• Slab boxes are equipped with 8 optional nail or screw holes
• Slab box hubs are elevated, permitting larger diameter rebar
• Slab boxes come with removable PE protective cover that fits
over the Divider Plate once inserted
5
ENT Dimensions of Pipe
Size
14300 514310 414320 314330 214335 714340 1
EC005370EC007240EC010160EC012500EC015300EC020225
½¾1
1¼1½2
370240160500300225
½¾1
1¼1½2
½¾1
14350 014360 914370 814380 714385 214390 6
ER0052000ER0071500ER0101000ER0121000ER015750ER020500
2,0001,5001,0001,000750500
14325 814326 514327 2
ES00510ES00710ES01010
100100100
ENT 10 Foot SticksSold in Full Skids or Bundles
ENT Reels
ENT Coils
UPCNumber
ProductNumber
Sizein
Feet/CoilDescription
UPCNumber
ProductNumber
Sizein
Feet/ReelDescription
UPCNumber
ProductNumber
Size in
Feet/BundleDescription
6
ENT Fittings Product Information
49540 ¾ 10049530 ½ 150
49550 1 5049554 1¼ 5049556 1½ 4049558 2 25
49750 15049760 10049770 5049774 5049776 50
49700 15049710 10049715 50
49580 12549590 10049600 50
49778 25
55000 5055002 4055004 15
55054 10 x 20/200Bags x Pieces/Carton
55056 10 x 20/20055058 10 x 20/20055060 10 x 10/10055062 10 x 10/10055064 10 x 5/50
ENT Quick-Snap Connectors(RKTS)
ENT to EMT Adapters(RKTC)
ENT Terminal AdaptersC/W Lock Nut(RKTA)
ENT Couplings(RKC)
ENT Clip Rings(RKR)
RKC15RKC10
RKC20RKC25RKC30RKC35
RKTA10RKTA15RKTA20RKTA25RKTA30
RKTS10RKTS15RKTS20
RKTC10RKTC15RKTC20RKTC25RKTC30RKTC35
RKTA35
RKR10RKR15RKR20RKR25RKR30RKR35
DescriptionSizein
UPCNumber
Carton Quantity
ProductNumber
¾½
11¼1½2
¾½
1
¾½
1
1¼1½2
¾½
11¼1½2
7
ENT Fittings Product Information
49780 ½ 25049790 ¾ 10049800 1 100
RTP10RTP15RTP20
Tapered Plugs
Slab Box 1” Extension RingC/w Long Screws
49620 ¾ 15049610 ½ 150
49630 1 20049640 1¼ 200
49996 - 20
RECM15RECM10
RECM20RECM25
Heavy Duty Lock Nut 49670 20049680 20049690 200
RLN10RLN15RLN20
49672 20049674 200
RLN25
49676 200RLN35RLN30
RSMBEXTENSION
Stubbys
55016 ½ 5055018 ¾ 5055020 1 5055022 1¼ 5055024 1½ 5055026 2
½¾1
1¼1½2
50
RKASTB10RKASTB15RKASTB20RKASTB25RKASTB30RKASTB35
45˚ Angled Form Stubby
DescriptionSizein
UPCNumber
Carton Quantity
ProductNumber
8
Royal Slab Ident-a-Box® - Quick Snap PVC Slab Box with Hub Extensions Comes with Moulded Connectors and Extra Large Body Design (51.0 in3)
5507255070
55074550765507855080
8 x ¾8 x ½
4 x ½ - 4 x ¾4 x ¾ - 4 x 14 x ½ - 4 x 1
RSSB-H-15RSSB-H-10
RSSB-H-10-15RSSB-H-15-20
4 x ½ - 2 x ¾- 2 x 1
RSSB-H-10-15-20RSSB-H-10-20
5503455029
55028550305503255031
8 x ¾8 x ½
4 x ½ - 4 x ¾4 x ¾ - 4 x 14 x ½ - 4 x 1
RSVDB-H-15RSVDB-H-10
RSVDB-H-10-15RSVDB-H-15-20
4 x ½ - 2 x ¾- 2 x 1
RSVDB-H-10-15-20RSVDB-H-10-20
55036 ½55038 ¾55040 1
RSVSB-H-10RSVSB-H-15RSVSB-H-20
Deep Single Gang Concrete Wall Box
Shallow Single Gang Concrete Wall Box
Square Slab Box2020
20202020
2525
25252525
707070
4999749999
49998550015500355005
8 x ¾8 x ½
4 x ½ - 4 x ¾4 x ¾ - 4 x 14 x ½ - 4 x 1
RSMB-15-IMBRSMB-10-IMB
RSMB-10-15-IMBRSMB-15-20-IMB
4 x ½ - 2 x ¾ - 2 x 1
RSMB-10-15-20-IMBRSMB-10-20-IMB
5501255006
55010550145500855015
8 x ¾8 x ½
4 x ½ - 4 x ¾4 x ¾ - 4 x 14 x ½ - 4 x 1
RSMBS-H-15RSMBS-H-10
RSMBS-H-10-15RSMBS-H-15-20
4 x ½ - 2 x ¾- 2 x 1
RSMBS-H-10-15-20RSMBS-H-10-20
Shallow Slab Boxes
Isolator Module Slab Box
C/W Red Lid
2020
20202020
2525
25252525
55065 -RSSBH-DCDivider Plate 10/bag
Description Sizein
UPCNumber
ProductNumber
Carton Quantity
9
Royal Slab Ident-A-Box® - Quick Snap PVC Slab Box with Hub ExtensionsComes with Moulded Connectors and Extra Large Body Design (51.0 in3)
Grey: GenericGreen: Security, Cable, TelephoneWhite: Hydro - 600 VoltBlue: Hydro - 120 VoltYellow: Emergency and Lighting SignsRed: Fire Alarm
Ident-A-Box® Colour Legend
49721RSMB-H-10G Green 2549720RSMB-H-10 Grey 25
49722RSMB-H-10W White 2549723RSMB-H-10B Blue 2549724RSMB-H-10Y Yellow 2549725RSMB-H-10R Red 25
49802RSMB-H-15G Green 2549801RSMB-H-15 Grey 25
49803RSMB-H-15W White 2549804RSMB-H-15B Blue 2549805RSMB-H-15Y Yellow 2549806RSMB-H-15R Red 25
49731RSMB-H-10-15G Green 2549730RSMB-H-10-15 Grey 25
49732RSMB-H-10-15W White 2549733RSMB-H-10-15B Blue 2549734RSMB-H-10-15Y Yellow 2549735RSMB-H-10-15R Red 25
49837RSMB-H-15-20G Green 2549836RSMB-H-15-20 Grey 25
49838RSMB-H-15-20W White 2549839RSMB-H-15-20B Blue 2549846RSMB-H-15-20Y Yellow 2549847RSMB-H-15-20R Red 25
49841RSMB-H-10-20G Green 2549742RSMB-H-10-20 Grey 25
49842RSMB-H-10-20W White 2549843RSMB-H-10-20B Blue 2549844RSMB-H-10-20Y Yellow 2549845RSMB-H-10-20R Red 25
49831RSMB-H-10-15-20G Green 2549740RSMB-H-10-15-20 Grey 25
49832RSMB-H-10-15-20W White 2549833RSMB-H-10-15-20B Blue 2549834RSMB-H-10-15-20Y Yellow 2549835RSMB-H-10-15-20R Red 25
4 x 1/2”4 x 3/4”
NEW4 x 3/4”
4 x 1”
4 x 1/2”4 x 1”
4 x 1/2”2 x 3/4”
2 x 1”
8 x 3/4”
8 x 1/2”
UPCNumber
LidColour
PartNumber
Carton QuantitySize
10
Royal Slab Ident-A-Box® - Quick Snap PVC Slab Box with KnockoutsExtra Large Body Design (51.0 in3)
49560 ½ - 1¼Size
25-49570 -
RFCUTRFCUTB
49853RSMB-10G Green 2549852RSMB-10 Grey 25
49854RSMB-10W White 2549855RSMB-10B Blue 2549856RSMB-10Y Yellow 2549857RSMB-10R Red 25
49871RSMB-15G Green 2549870RSMB-15 Grey 25
49872RSMB-15W White 2549873RSMB-15B Blue 2549874RSMB-15Y Yellow 2549875RSMB-15R Red 25
49861RSMB-10-15G Green 2549860RSMB-10-15 Grey 25
49862RSMB-10-15W White 2549863RSMB-10-15B Blue 2549864RSMB-10-15Y Yellow 2549865RSMB-10-15R Red 25
49892RSMB-10-15-20G Green 2549891RSMB-10-15-20 Grey 25
49893RSMB-10-15-20W White 2549894RSMB-10-15-20B Blue 2549895RSMB-10-15-20Y Yellow 2549896RSMB-10-15-20R Red 25
49991RSMB-15-20-10G Green 2549990RSMB-15-20-10 Grey 25
49992RSMB-15-20-10W White 2549993RSMB-15-20-10B Blue 2549994RSMB-15-20-10Y Yellow 2549995RSMB-15-20-10R Red 25
Grey: GenericGreen: Security, Cable, TelephoneWhite: Hydro - 600 VoltBlue: Hydro - 120 VoltYellow: Emergency and Lighting SignsRed: Fire Alarm
Ident-A-Box® Colour Legend
8 x 1/2”
8 x 3/4”
4 x 1/2”4 x 3/4”
4 x 1/2”2 x 3/4”
2 x 1”
4 x 3/4”2 x 1/2”
2 x 1”
UPCNumber
LidColour
PartNumber
Carton QuantitySize
ENT CUTTERSPrice each
Cutter will cut up to 1 1/4” ENT.
Notes:
11
Our various pipe and fittings solutions have been manufactured to meet the needs of ourcustomers and their applications. Contact one of the below Sales Centres for more information:
• Municipal Pipe & Fittings Solutions• Plumbing Pipe & Fittings Solutions• Electrical Pipe & Fittings Solutions• Industrial Pipe & Fittings Solutions• Irrigation Pipe & Fittings Solutions
Sales & Distribution Centres:
Langley, BC, CanadaT/F 1.800.663.0696F 1.800.663.6564.......................................
Woodbridge, ON, CanadaT/F 1.866.769.7473F 905.856.3986.......................................
Laval, QC, CanadaT/F 1.800.465.9754F 450.688.6624.......................................
Distribution Centres:
Calgary, AB, CanadaT/F 1.800.663.0696F 1.800.663.6564.......................................
Winnipeg, MB, CanadaT/F 1.800.663.0696F 1.800.663.6564.......................................
royalelectricalca.comE_ENTPF_BRV4
Printed 02.2014