Post on 12-Feb-2019
transcript
Entrepreneurs Registration and Incentives
Management System (ERIMS)
Package Scheme of
Incentive (PSI) User
Manual
ERIMS User Manual
PSI User Manual
ERIMS Page 2 of 33
Table of Contents 1 PSI ............................................................................................................... 4
1.1 Step 1 Check Eligibility Page for MSME & LSI ...................................................................... 6
1.2 Step 1 Check Eligibility Page for Mega & Ultra Mega .......................................................... 8
1.3 Step 1 Check Eligibility Page for MSME/LSI/Mega and Ultra Mega ................................ 10
1.3.1 Check eligibility for MSME & LSI Unit ........................................................................... 10
1.3.2 Check eligibility for Mega & Ultra Mega Unit ................................................................ 12
1.4 Step 2 Fixed Capital Investment Page for MSME/LSI/Mega and Ultra Mega ................ 15
1.5 Step 3 Means of Finance Page for MSME/LSI/Mega and Ultra Mega ............................ 18
1.6 Step 4 Product and Employment Page for MSME/LSI/Mega and Ultra Mega ............... 19
1.7 Step 5 Supporting Document Page for MSME/LSI/Mega and Ultra Mega ...................... 23
1.8 Step 6 Review Page for MSME/LSI/Mega and Ultra Mega ............................................... 24
1.9 Step 7 Eligibility Certificate for MSME/LSI/Mega and Ultra Mega ................................... 26
Table of Figure
Figure 1 PSI Apply Online Page .............................................................................................................. 5
Figure 2 PSI Application Screen (For New MSME & LSI) ................................................................... 6
Figure 3 PSI Application Screen (For New/ Expansion Mega & Ultra Mega) 1-2 ............................ 8
Figure 4 PSI Application Screen (For New/ Expansion Mega & Ultra Mega) 2-2 ............................ 9
Figure 5 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega) 1-2................................ 13
Figure 6 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega) 2-2................................ 14
Figure 7 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega) 1-2................................ 15
Figure 8 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega) 2-2................................ 16
Figure 9 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega) ...................................... 18
Figure 10 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega) .................................... 19
Figure 11 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega) 1-2 ............................. 21
Figure 12 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega) 2-2 ............................. 22
Figure 13 PSI Application Submission Screen for All (MSME/LSI/Mega & Ultra Mega) .............. 24
ERIMS User Manual
PSI User Manual
ERIMS Page 3 of 33
Figure 14 PSI EC (1- 8) ........................................................................................................................... 26
Figure 15 PSI EC (2- 8) ........................................................................................................................... 27
Figure 16 PSI EC (3- 8) ........................................................................................................................... 28
Figure 17 PSI EC (4- 8) ........................................................................................................................... 29
Figure 18 PSI EC (5- 8) ........................................................................................................................... 30
Figure 19 PSI EC (6- 8) ........................................................................................................................... 31
Figure 20 PSI EC (7- 8) ........................................................................................................................... 32
Figure 21 PSI EC (8- 8) ........................................................................................................................... 33
ERIMS User Manual
PSI User Manual
ERIMS Page 4 of 33
1 PSI
A. Prerequisites for PSI
Purpose: The purpose of this service is to generate PSI Eligibility Certificate (EC)
for MSME/ LSI/ Mega & Ultra Mega Enterprise.
Pre-requisites:
1. User must create Login on DoI website.
2. User must create Enterprise Profile.
3. User must create Unit Profile.
Login as: Enterprise User / Unit User
Menu: Apply Online > Select Unit > Select Service (PSI)
B. Broad Steps for PSI
Select Apply online from Dashboard Menu.
Select Unit for which PSI needs to be applied.
Select PSI Service from Dropdown.
Check the required documents displayed at right and Click "Apply now".
ERIMS User Manual
PSI User Manual
ERIMS Page 5 of 33
Figure 1 PSI Apply Online Page
ERIMS User Manual
PSI User Manual
ERIMS Page 6 of 33
1.1 Step 1 Check Eligibility Page for MSME & LSI
Figure 2 PSI Application Screen (For New MSME & LSI)
ERIMS User Manual
PSI User Manual
ERIMS Page 7 of 33
1. System will ask two questions to Applicant. If you are applying for new unit then
you must select “NO” for both the question, which is by default Set as “NO” for new
unit.
2. If Applicant is applying for Existing Unit or Expansion unit then user need to select
“YES” for both the Questions and needs to upload Eligibility Certificate which is
issued earlier for the same unit.
3. User needs to select license from system generated drop down and provide details
like License Number, License Issued Date and also upload license for which
details is provided.
4. User needs to check Constitution details which is system populated. Constitution
details can be updated from Enterprise profile.
5. User needs to provide Legal Possession Date of Land from calendar.
6. After filling all the details user needs to click on Next button.
7. System will check the eligibility criteria based on PSI Scheme Period i.e. PSI 2013.
Any one of the effective steps i.e. EM (Part I/II) / IEM, Constitution Date or Effective
Possession of Land completed on or after 01.04.2013., once this criteria is fulfilled
then system will move to Next page if not fulfilled then System will show error
message.
ERIMS User Manual
PSI User Manual
ERIMS Page 8 of 33
1.2 Step 1 Check Eligibility Page for Mega & Ultra Mega
Figure 3 PSI Application Screen (For New/ Expansion Mega & Ultra Mega) 1-2
1. User needs to select Mega Unit type i.e. Employment Based and Investment
Based.
ERIMS User Manual
PSI User Manual
ERIMS Page 9 of 33
Figure 4 PSI Application Screen (For New/ Expansion Mega & Ultra Mega) 2-2
ERIMS User Manual
PSI User Manual
ERIMS Page 10 of 33
1. After selection user needs to provide details in Check Eligibility
2. User needs to enter Date and Number of Offer Letter issued by Government of
Maharashtra.
3. User needs to select license from system generated drop down and provide details
like License Number, License Issued Date and also upload license for which
details is provided.
4. User needs to check Constitution details which is system populated. Constitution
details can be updated from Enterprise profile.
5. User needs to provide Legal Possession Date of Land from calendar.
6. After filling all the details user needs to click on Next button.
7. System will check the eligibility criteria based on PSI Scheme Period i.e. PSI 2013.
License Date, Constitution Date or Land Possession Date Must be in Scheme
Period, once this criteria is fulfilled then system will move to Next page if not fulfilled
then System will show error message.
1.3 Step 1 Check Eligibility Page for MSME/LSI/Mega and Ultra Mega
1.3.1 Check eligibility for MSME & LSI Unit
1. System will ask two questions to Applicant. If you are applying for new unit then
you must select “NO” for both the question, which is by default Set as “NO” for new
unit.
2. If Applicant is applying for Existing Unit or Expansion unit then user need to select
“YES” for both the Questions and needs to upload Eligibility Certificate which is
issued earlier for the same unit.
ERIMS User Manual
PSI User Manual
ERIMS Page 11 of 33
3. User needs to select license from system generated drop down and provide details
like License Number, License Issued Date and also upload license for which
details is provided.
4. User needs to check Constitution details which is system populated. Constitution
details can be updated from Enterprise profile.
5. User needs to provide Legal Possession Date of Land from calendar.
6. User needs to select the Investment date from calendar depending upon from date
system will calculate to as per Scheme 2013.
7. User needs to provide details Fixed Capital Investment as per previous financial
year and additional fixed capital investment. The system will calculate addition
percentage of Fixed Capital Investment.
8. User needs to provide Employment details for maintaining local and other
employment percentage. Depending upon the data enter by user system will
calculate Additional percentage and percentage of Local employment.
9. User needs to cross check the Production Details and Additional percentage
populated by system if it is not correct then user need to update Unit Profile.
10. After filling all the details user needs to click on Next button.
11. System will check the eligibility criteria based on PSI Scheme Period i.e. PSI 2013.
License Date, Constitution Date or Land Possession Date Must be in Scheme
Period, once this criteria is fulfilled then system will move to Next page if not fulfilled
then System will show error message.
12. For Expansion of MSME/ LSI Unit has to fulfill the below criteria
a. 25% Increment in current Installed Capacity.
b. 25% increment in current Fixed Capital Investment.
c. 10% increment in current Employment.
ERIMS User Manual
PSI User Manual
ERIMS Page 12 of 33
13. If unit will not match above criteria then system will display error message.
1.3.2 Check eligibility for Mega & Ultra Mega Unit
1. System will ask two questions to Applicant. If you are applying for new unit then
you must select “NO” for both the question, which is by default Set as “NO” for new
unit.
2. If Applicant is applying for Existing Unit or Expansion unit then user need to select
“YES” for both the Questions and needs to upload Eligibility Certificate which is
issued earlier for the same unit.
3. User needs to select license from system generated drop down and provide details
like License Number, License Issued Date and also upload license for which
details is provided.
4. User needs to check Constitution details which is system populated. Constitution
details can be updated form Enterprises profile.
5. User needs to provide Legal Possession Date of Land from calendar.
6. User needs to select the Investment date from calendar depending upon from date
system will calculate to as per Scheme 2013.
7. For Mega & Ultra Mega unit Fixed Capital Investment, Production Capacity &
Additional Employment is optional. No need to enter data in these fields.
8. For Mega & Ultra Mega Unit no need to fulfill the criteria of expansion as below
a. 25% Increment in current Production Capacity.
b. 25% increment in current Fixed Capital Investment.
c. 10% increment in current Employment.
9. After filling all the details user needs to click on Next button.
ERIMS User Manual
PSI User Manual
ERIMS Page 13 of 33
Figure 5 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega) 1-2
ERIMS User Manual
PSI User Manual
ERIMS Page 14 of 33
Figure 6 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega) 2-2
ERIMS User Manual
PSI User Manual
ERIMS Page 15 of 33
1.4 Step 2 Fixed Capital Investment Page for MSME/LSI/Mega and Ultra Mega
Figure 7 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega) 1-2
ERIMS User Manual
PSI User Manual
ERIMS Page 16 of 33
Figure 8 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega) 2-2
1. User needs to select Investment Start date from calendar and system will auto
calculate Investment End Date.
2. User needs to select Stage from system populated drop down as follows
a. Pre-Production :-
If production is not started or unit Appraisal or CA Certificate is pending then
user needs to select Pre-Production.
ERIMS User Manual
PSI User Manual
ERIMS Page 17 of 33
b. Post-Production :-
If production is started then or unit Appraisal or CA certificate is done then
user needs to select Post-Production.
3. If unit select post production then user need to select date of commercial
Production from calendar. Commercial Production Date must in investment period
provided by user.
4. If Appraisal is done then user need to click on Check box and provide details like
Appraisal Date, Appraised By and Institute address.
5. If Appraisal is not done then these fields will be disabled in investment heads for
user.
6. If CA Certificate is done then user needs to click on Check box and need to select
CA certificate date i.e. Investment from date and Investment up to date. User
needs to select these date accordingly to financial year.
7. If CA Certificate is not done then these fields will be disabled in investment heads
for user.
8. After filing all above details, user needs to enter data in investment heads.
9. Once all details are filed by user then he needs to click on Next button.
ERIMS User Manual
PSI User Manual
ERIMS Page 18 of 33
Figure 9 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega)
1.5 Step 3 Means of Finance Page for MSME/LSI/Mega and Ultra Mega
1. User needs to enter Means of finance details as per Proposed, Appraised and as
per CA Certificate.
2. This value should be less than or equal to Fixed Capital Investment i.e. Step 2. If
it is not less than or equal to FCI page then system will display error message.
ERIMS User Manual
PSI User Manual
ERIMS Page 19 of 33
3. If there are any creditors then user needs to enter those in CA Certificate value
field.
Figure 10 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega)
1.6 Step 4 Product and Employment Page for MSME/LSI/Mega and Ultra Mega
1. User needs to check system populated product from unit profile if some value is
wrongly populated then user needs to update it from Unit profile.
ERIMS User Manual
PSI User Manual
ERIMS Page 20 of 33
2. User needs to enter employment details for total Local & other employment, based
on data enter system will calculate percentage of local Non-Supervisor
employment.
3. If employment criteria will not be fulfilled as per PSI Scheme 2013, then system
will show error message.
4. After filling all details then user need to click on Next button.
ERIMS User Manual
PSI User Manual
ERIMS Page 21 of 33
Figure 11 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega) 1-2
ERIMS User Manual
PSI User Manual
ERIMS Page 22 of 33
Figure 12 PSI Application Screen for All (MSME/LSI/Mega & Ultra Mega) 2-2
ERIMS User Manual
PSI User Manual
ERIMS Page 23 of 33
1.7 Step 5 Supporting Document Page for MSME/LSI/Mega and Ultra Mega
1. In this step user needs to upload required supporting document for the Eligibility
Certificate.
2. User needs to select Document Name then click on “Choose File” button to select
specific file from System folder.
3. Once file is selected then user needs to click on Upload button. It will take some
time to upload the document.
4. Only PDF document within 5 MB size limit is accepted by ERIMS Application.
5. User needs to upload multiple types of documents e.g. IEM/MPCB consent etc. in one
single PDF file. If the files are uploaded separately, the system will automatically delete
the earlier file.
6.
7. Once all documents are uploaded then user needs to click on next button.
ERIMS User Manual
PSI User Manual
ERIMS Page 24 of 33
Figure 13 PSI Application Submission Screen for All (MSME/LSI/Mega & Ultra Mega)
1.8 Step 6 Review Page for MSME/LSI/Mega and Ultra Mega
1. User needs to check all the details entered in application by clicking on ‘+’ icon.
2. If user wants to update any data, he can click on “Edit” button.
3. If all data is correct then user needs to click on submit button for application
submission.
4. Once Application is submitted then it will go to DoI workflow for approval.
ERIMS User Manual
PSI User Manual
ERIMS Page 25 of 33
5. If some issues are identify by department then they can raise query for more
clarification.
6. User can track the application status on Dashboard in Progress section.
ERIMS User Manual
PSI User Manual
ERIMS Page 26 of 33
1.9 Step 7 Eligibility Certificate for MSME/LSI/Mega and Ultra Mega
Figure 14 PSI EC (1- 8)
ERIMS User Manual
PSI User Manual
ERIMS Page 27 of 33
Figure 15 PSI EC (2- 8)
ERIMS User Manual
PSI User Manual
ERIMS Page 28 of 33
Figure 16 PSI EC (3- 8)
ERIMS User Manual
PSI User Manual
ERIMS Page 29 of 33
Figure 17 PSI EC (4- 8)
ERIMS User Manual
PSI User Manual
ERIMS Page 30 of 33
Figure 18 PSI EC (5- 8)
ERIMS User Manual
PSI User Manual
ERIMS Page 31 of 33
Figure 19 PSI EC (6- 8)
ERIMS User Manual
PSI User Manual
ERIMS Page 32 of 33
Figure 20 PSI EC (7- 8)
ERIMS User Manual
PSI User Manual
ERIMS Page 33 of 33
Figure 21 PSI EC (8- 8)