Post on 12-Nov-2014
transcript
12929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623
www.Robo-Tool.com
PRECISION ALUMINUM TUBE
All Precision Aluminium Tubes (Booms) are extruded from 6063-T5 aluminium and clear anodized. This adds corrosion resistance and an improved coefficient of friction to minimize the chances of rotation. Precision Aluminium Tubes can be purchased by the foot or in full 12-ft. lengths for cost savings.
All precision tubes are UPS shippable in 4 to 6 ft. lengths. Special arrangements can be made for delivery of longer lengths
PART # STOCK # LENGTH O.D. I.D. WEIGHT (LBS)
RTI-PAT-50-144 17000 144” 0.50” 0.34” 1.488
RTI-PAT-50-12 17001 12” 0.50” 0.34” 0.124
RTI-PAT-75-144 17002 144” 0.75” 0.58” 2.409
RTI-PAT-75-12 17003 12” 0.75” 0.58” 0.20
RTI-PAT-100-144 17004 144” 1.00” 0.84” 3.257
RTI-PAT-100-12 17005 12” 1.00” 0.84” 0.271
2929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623www.Robo-Tool.com
2
CROSS CLAMP BLOCKS
Cross Clamp Blocks provide an inexpensive way to quickly and easily join precision tubes at 90-degree angles formaximum flexibility when designing EOAT’s.
PART # STOCK # L W H HOLE “A” HOLE “B” WEIGHT (LBS)
RTI-CLM-50-50 17020 2.00” 0.75” 0.75” 0.50” 0.50” 0.090
RTI-CLM-75-50 17021 2.25” 1.00” 0.75” 0.75” 0.50” 0.123
RTI-CLM-75-75 17022 2.50” 1.00” 1.00” 0.75 0.75 0.160
RTI-CLM-100-50 17023 2.50” 1.25” 0.75” 1.00” 0.50” 0.150
RTI-CLM-100-75 17024 2.875” 1.25” 1.00” 1.00” 0.75” 0.224
RTI-CLM-100-100 17025 3.00” 1.25” 1.25” 1.00” 1.00” 0.291
RTI-CLM-50-50
RTI-CLM-75-50
RTI-CLM-75-75
RTI-CLM-100-100
RTI-CLM-100-75
RTI-CLM-100-50
32929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623
www.Robo-Tool.com
PARALLEL CLAMP BLOCKS
Parallel Clamp Blocks are used to strengthen framing systems by doubling-up aluminium tube for base frame.
PART # STOCK # L W H X HOLE “A” WEIGHT (LBS)
RTI-PCLM-75-75 17037 4.125” 1.00” 1.00” 2.75” 0.75” 0.29
RTI-PCLM-100-100 17034 5.00” 1.25” 1.25” 2.50” 1.00” 0.55
RTI-PCLM-75-75
RTI-PCLM-100-100
2929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623www.Robo-Tool.com
4
WRIST CLAMP BLOCKS
Wrist Clamps are used when two tubes need to be joined together at a 90-degree angle in the same plane.
PART # STOCK # L W H HOLE “A” HOLE “B” WEIGHT (LBS)
RTI-WC-50-50 17035 1.00” 1.62” 1.62” 0.50” 0.50 0.130
RTI-WC-75-50 17030 1.00” 1.62” 1.66” 0.75” 0.50” 0.116
RTI-WC-75-75 17031 1.00” 1.75” 1.75” 0.75” 0.75” 0.121
RTI-WC-100-75 17032 1.25” 2.00” 1.75” 1.00” 0.75” 0.169
RTI-WC-100-100 17033 1.25” 2.00” 2.00” 1.00” 1.00” 0.172
RTI-WC-50-50
RTI-WC-75-50
RTI-WC-100-100
RTI-WC-100-75
RTI-WC-75-75
52929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623
www.Robo-Tool.com
SWIVEL FLANGED CLAMP BLOCK
Swivel Flange Clamps provide additional flexibility in positioning the EOAT (end-of-arm-tool) with adjustment up to 22 degrees from the horizontal plane. Machinable flange can be adapted to most tool changers. Available to fit 1” tube only.
PART # STOCK # L W H X Y HOLE “A” WEIGHT (LBS)
RTI-FCS-100 17060 2.00” 2.50” 2.25” 2.00” 1.50” 1.00” 0.479
2929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623www.Robo-Tool.com
6
HORIZONTAL FLANGED CLAMPS
Horizontal Flange Clamps provide the base for building EOAT’s. These clamps are designed to mount directly to the robot arm or attach to a variety of tool changers. The standard square base Horizontal Flange Clamps are designed to fit a machinable tool plate. They can be drilled and tapped anywhere along the flange.
NOTE: RTI-FCH-100Standard flange clamp base can be machined to fit most tool changers.
NOTE: RTI-FCH-75-LLong flange clamp base mount with bolt-pattern to fit the ATI QC20 series tool changer.
NOTE: RTI-FCH-75Standard flange clamp base designed to work with small to mid-size EOAT’s. It can be machined to fit most tool changers.
PART # STOCK # L W H X Y HOLE “A” WEIGHT (LBS)
RTI-FCH-75 17041 2.25” 2.00” 1.38” 1.50” 1.75” 0.75” 0.308
RTI-FCH-75-L 17042 2.25” 2.25” 1.38” 1.75” 1.75” 0.75” 0.342
RTI-FCH-100 17044 2.50” 2.00” 1.68” 1.50” 2.00” 1.00” 0.407
RTI-FCH-100
RTI-FCH-75-L
RTI-FCH-75
72929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623
www.Robo-Tool.com
HORIZONTAL FLANGED CLAMPS
The round tool changers are designed to fit specific brand tool-side tool changers, or can be custom machined.
NOTE: RTI-FCH-100-R &
RTI-FCH-75-RFits: EOA 60 and De-Sta-Co TP-60 tool changer.
NOTE: RTI-FCH-50-RFits: Gimatic QC-90-B tool side quick changer.
PART # STOCK # DIA. H X1 X2 Y1 Y2 Y3 HOLE “A” WEIGHT (LBS)
RTI-FCH-50-R 17040 2.25” 1.13” 1.95” 1.38” - - - 0.50” 0.300
RTI-FCH-75-R 17043 2.75” 1.50” 2.03” 1.50” 1.17” 1.75” 2.35” 0.75” 0.391
RTI-FCH-100-R 17045 2.75” 1.81” 2.03” 1.50” 1.17” 1.75” 2.35” 1.00” 0.486
RTI-FCH-100-R
RTI-FCH-75-R
RTI-FCH-50-R
2929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623www.Robo-Tool.com
8
VERTICAL FLANGED CLAMPS
Vertical Flange Clamps provide the base for building EOAT’s. These clamps are designed to mount directly to the robot arm or to attach to a variety of tool changers. The standard square base Vertical Flange Clamps are designed to fit a machinable tool plate or they can be drilled and tapped anywhere along the flange.
PART# STOCK # L W H X Y HOLE “A” WEIGHT (LBS)
RTI-FCV-75-S 17049 2.00” 2.00” 0.273 1.50” 1.50” 0.75” 0.273
RTI-FCV-75 17050 2.25” 2.25” 1.75” 1.75” 1.75” 0.75” 0.316
RTI-FCV-100 17052 2.25” 2.25” 2.00” 1.75” 1.75” 1.00” 0.332
RTI-FCV-75-S
RTI-FCV-75
RTI-FCV-100
92929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623
www.Robo-Tool.com
VERTICAL FLANGED CLAMPS
Round tool changers are designed to fit EOA and De-Sta-Co TP-60 tool-side tool changers, or can be custom machined.
PART# STOCK # DIA. H X1 X2 Y1 Y2 Y3 HOLE “A” WEIGHT (LBS)
RTI-FCV-75-R 17051 2.75” 2.00” 2.06” 1.50” 1.19” 1.50” 2.38” 0.75” 0.340
RTI-FCV-100-R 17053 2.75” 2.00” 2.06” 1.50” 1.19” 1.75” 2.38” 1.00” 0.401
RTI-FCV-100-R
RTI-FCV-75-R
2929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623www.Robo-Tool.com
10
PROFILE EXTRUSION CLAMPS
Profile Extrusion Clamps provide a simple transition from T-slot profile extrusions to Robo-Tool’s Precision Aluminum Tube.
PART # STOCK # L W H HOLE “A” WEIGHT (LBS)
RTI-XCLM-50 17061 1.34” 0.63” 0.73” 0.50” 0.088
RTI-XCLM-75 17062 1.58” 0.63” 0.98” 0.75” 0.113
RTI-XCLM-100 17063 1.83” 0.63” 1.23” 1.00” 0.195
RTI-XLCM-50
RTI-XLCM-75
RTI-XLCM-100
112929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623
www.Robo-Tool.com
SWIVEL NIPPER CLAMP
The single piece design of the Swivel Nipper Clamps features two bolts for separate clamping pressure on swivel ball and nipper body. Adjustable to 22-degree angles. Simple to use and fully adjustable. Fits sizes 5mm to 30mm nipper bodies.
PART # STOCK # L W H HOLE “A” HOLE “B” WEIGHT (LBS)
RTI-NPC-50-SPT05 17100 3.05” 1.50” 0.50” 1.19” 0.50” 0.154
RTI-NPC-50-SPT10 17101 3.38” 1.75” 0.50” 1.43” 0.50” 0.167
RTI-NPC-50-SPT20 17102 3.88” 2.11” 0.50” 1.77” 0.50” 0.186
RTI-NPC-50-SPT30 17103 4.44” 2.62” 0.50” 2.22” 0.50” 0.269
RTI-NPC-75-SPT30 17104 4.63” 2.62” 0.50” 2.22” 0.75” 0.269
RTI-NPC-50-SPT05
RTI-NPC-50-SPT10
RTI-NPC-50-SPT20
RTI-NPC-50-SPT30
RTI-NPC-75-SPT30
2929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623www.Robo-Tool.com
12
SWIVEL NIPPER MOUNT
Versitile three piece clamp with swivel ball base, standoff and clamp to fit Size 20mm, 30mm and 50mm nipper bodies.
PART # STOCK # L* W* H* HOLE “A” HOLE “B” WEIGHT (LBS)
RTI-SNM-50-SPT20-50 17070 4.02” 2.09” 1.50” 1.77” 0.50” 0.304
RTI-SNM-50-SPT30-50 17071 4.43” 2.53” 1.50” 2.20” 0.50” 0.332
Current Options with 1/2” Spacer *Values based on Standard Configuration
*Standard Configuration
Note: Spacer available in 1/2” and1 1/4” lengths.
RTI-SNM-50-SPT30-50
RTI-SNM-50-SPT20-50
132929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623
www.Robo-Tool.com
SWIVEL NIPPER MOUNT
PART # STOCK # L* W* H* HOLE “A” HOLE “B” WEIGHT (LBS)
RTI-SNM-50-SPT20-125 17072 4.00” 2.09” 2.25” 1.77” 0.50” 0.355
RTI-SNM-50-SPT30-125 17073 4.43” 2.53” 2.25” 2.20” 0.50” 0.375
RTI-SNM-50-SPT50-125 17074 5.18” 3.27” 2.25” 2.95” 0.50” 0.400
RTI-SNM-75-SPT20-125 17075 4.33” 2.09” 2.31” 1.77” 0.75” 0.385
RTI-SNM-75-SPT30-125 17076 4.74” 2.53” 2.31” 2.20” 0.75” 0.394
RTI-SNM-75-SPT50-125 17077 5.49” 3.27” 2.31” 2.95” 0.75” 0.429
RTI-SNM-100-SPT30-125 17078 5.00” 2.53” 2.38” 2.20” 1.00” 0.461
RTI-SNM-100-SPT50-125 17079 5.74” 3.27” 2.38” 2.95” 1.00” 0.482
Current Options with 1 1/4” Spacer *Values based on Standard Configuration
HOW TO ORDER:RTI-SNM- HOLE “B” SIZE (50 for 1/2”, 75 for 3/4”, 100 for 1”)-SPT NIPPER BODY SIZE(mm) - SPACER SIZE (50 FOR 1/2” OR 125 FOR 1 1/4”)
(i.e. RTI-SNM-50-SPT20-125)
RTI-SNM-75-SP
T20-125
RTI-SNM-75-SP
T30-125
RTI-SNM-100-SP
T30-125
RTI-SNM-100-SP
T50-125
RTI-SNM-75-SP
T50-125
RTI-SNM-50-SP
T50-125
RTI-SNM-50-SP
T20-125
RTI-SNM-50-SP
T30-125
2929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623www.Robo-Tool.com
14
POST STYLE NIPPER MOUNTS
Versitile three piece clamp with 1/2” or 1 1/4” post mount standoff and clamp to fit Size Size 20mm, 30mm nipper
body. Also available is a one piece nipper mount for size 20mm nipper.
PART # STOCK # L W H HOLE “A” WEIGHT (LBS)
RTI-PNM-50-SPT20-50 17120 2.53” 2.10” 1.50” 1.77” 0.226
RTI-PNM-50-SPT20-125 17121 2.53” 2.10” 2.25” 1.77” 0.226
RTI-PNM-50-SPT30-125 17122 3.94” 2.53” 2.25” 2.20” 0.287
RTI-NIP-20 17123 3.532” 2.00” 0.75” 1.77” 0.238
RTI-NIP-20
HOW TO ORDER: (See Below for Availability)RTI-PNM-50-SPT NIPPER BODY SIZE(mm) - SPACER SIZE (50 FOR 1/2” OR 125 FOR 1 1/4”)
(i.e. RTI-PNM-50-SPT20-50)
RTI-PNM-50-SPT20-50
RTI-PNM-50-SPT20-125
RTI-PNM-50-SPT30-125
152929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623
www.Robo-Tool.com
SWIVEL STYLE GRIPPER MOUNTS
Swivel style gripper mounts include the adjustable ball swivel and are made to fit a variety of 2 and 3 jaw grippers
including: Mindman, Harmo and De-Sta-Co.
PART # STOCK # L W H HOLE “A” WEIGHT (LBS)
RTI-SGM-50-GMB-150 17150 2.78” 1.50” 1.25” 0.50” 0.207
RTI-SGM-50-GMB-250 17151 1.69” 2.50” 2.75” 0.50” 0.241
RTI-SGM-50-GMB-230 17152 2.64” 2.30” 1.25” 0.50” 0.283
RTI-SGM-75-GMB-250 17153 2.00” 2.50” 2.81” 0.75” 0.251
RTI-SGM-75-GMB-230 17154 2.95” 2.30” 1.31” 0.75” 0.293
GMB-250 SERIES
GMB-230 SERIES
GMB-150 SERIES
HOW TO ORDER: (See Below for Availability)RTI-SGM- HOLE “A” SIZE (50 for 1/2”, 75 for 3/4”) - Series (GMB-150, 230 or 250)
(i.e. RTI-SGM-50-GMB-150)
2929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623www.Robo-Tool.com
16
POST STYLE GRIPPER MOUNTS
Post style gripper mounts one piece construction, 1/2” size made to fit smaller grippers and 3/4” size to fit
medium grippers including: Mindman, Harmo and De-Sta-Co.
PART # STOCK # L D1 D2 WEIGHT (LBS)
RTI-PGM-50-150R 17130 1.75” 1.50” 0.50” 0.069
RTI-PGM-75-175R 17135 1.75” 1.75” 0.75” 0.120
RTI-PGM-50-150R
RTI-PGM-75-175R
172929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623
www.Robo-Tool.com
POST STYLE GRIPPER MOUNTS
Post style gripper mounts 1/2” post together with base are made to fit a variety of 2 and 3 jaw grippers including:
Mindman, Harmo and De-Sta-Co.
PART # STOCK # L W H WEIGHT (LBS)
RTI-GMB-150 17125 1.50” 1.50” 0.25” 0.044
RTI-GMB-230 17126 2.30” 2.30” 0.25” 0.119
RTI-GMB-250 17127 2.50” 1.75” 0.25” 0.077
RTI-PMB-50 17128 1.50” 0.50” 1.50” 0.058
RTI-PGM-50-GMB-150 17131 1.50” 1.50” 1.75” 0.120
RTI-PGM-50-GMB-250 17132 2.50” 2.25” 1.50” 0.160
RTI-PGM-50-GMB-230 17133 2.30” 2.30” 1.75” 0.200
RTI-PGM-50-GMB-150
RTI-PGM-50-GMB-230
RTI-PGM-50-GMB-250
RTI-PMB-50
RTI-GMB-150
RTI-GMB-230 RTI-GMB-250
2929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623www.Robo-Tool.com
18
GRIPPERS FINGERS
Pneumatic Gripper Finger with spring return is used to secure parts at the edge. The RTI-GRF-20-35 provides a
35 degree reach and a finger claw. The RTI-GRF-20-95 provides a full 95 degree reach and is typically used with
an edge clamp.
PART # STOCK # L W ANGLE WEIGHT (LBS)
RTI-GRF-20-35 17161 4.249” 0.75” 35 0.134
RTI-GRF-20-95 17160 3.637” 0.75” 95 0.130
192929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623
www.Robo-Tool.com
GRIPPER FINGER CLAMPS & MOUNTS
PART # STOCK # LENGTH WIDTH HEIGHT WEIGHT (LBS)
RTI-ANF-20 17165 2.00” 1.25” 0.50” 0.05
RTI-PGM-GRF-20 17166 2.25” 1.00” 0.75” 0.90
NOTE: RTI-ANF-20 Delrin edge clamp, designed for use with the RTI-GRF-20-95 gripper finger and acts as a stop for the part being gripped.
NOTE: RTI-PGM-GRF-20Post style clamp designed for use with any 20mm gripper finger.
2929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623www.Robo-Tool.com
20
LEVEL COMPENSATOR MOUNTS
Post Style Level Compensator Mounts fit the Edco and other brand level compensators. Mounting post
is 1/2” diameter post that fits the RTI-CLM-XX-50 series Cross Clamp Blocks.
PART # STOCK # L W H WEIGHT (LBS)
RTI-LCM-LC10 17140 1.50” 0.75” 0.497” 0.036
RTI-LCM-LC18 17141 1.75” 1.00” 0.479” 0.044
212929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623
www.Robo-Tool.com
CUSTOM DESIGN COMPONENTS
PART # STOCK # L W H HOLE “A” WEIGHT (LBS)
RTI-SMB-50 17110 1.69” 1.50” 0.50” 0.50” 0.131
RTI-SMB-75 17111 2.00” 1.50” 0.50” 0.75” 0.156
RTI-SMB-100 17112 2.25” 1.75” 0.50” 1.00” 0.214
RTI-NM-SPT20 17090 2.72” 2.10” 0.50” 1.78” 0.128
RTI-NM-SPT30 17091 3.13” 2.53” 0.50” 2.21” 0.138
RTI-NM-SPT50 17092 3.88” 3.27” 0.50” 2.95” 0.163
RTI-SM-SP-50 17179 1.50” 0.38” 1.25” - 0.023
RTI-SM-SP-125 17180 1.50” 0.38” 0.50” - 0.061
RTI-SM-SP-50
RTI-SM-SP-125
RTI-SMB-100
RTI-SMB-75
RTI-SMB-50
RTI-NM-SPT50
RTI-NM-SPT30
RTI-NM-SPT20
2929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623www.Robo-Tool.com
22
CUSTOM DESIGN COMPONENTS
For RTI-GMP-12 Only
For RTI-GMP-16,20,64 & 80
PART # STOCK # L W H X Y HOLE “A” WEIGHT (LBS)
RTI-RSGM-50 17173 0.75” 1.25” 0.75” - - 0.50” 0.058
RTI-GMP-12 17174 1.50” 1.25” 0.38” 0.87” 0.40” 0.15” 0.064
RTI-GMP-16 17175 1.59” 1.00” 0.25” 1.02” 0.55” 0.19” 0.037
RTI-GMP-20 17176 1.75” 1.25” 0.25” 1.38” 0.63” 0.23” 0.051
RTI-GMP-64 17177 2.13” 1.50” 0.25” 1.65” 1.07” 0.23” 0.075
RTI-GMP-80 17178 2.50” 1.75” 0.25” 2.05” 1.26” 0.23” 0.104
RTI-RSGM-50 = 1/2” ROUND STOCK GRIPPER MOUNT
RTI-GMP-12 RTI-GMP-16 RTI-GMP-20 RTI-GMP-64 RTI-GMP-80
232929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623
www.Robo-Tool.com
CUSTOM DESIGN COMPONENTS
PART # STOCK # L W H WEIGHT (LBS)
RTI-MPLT-64 17167 1.17” 1.25” 0.50” 0.043
RTI-MPLT-80 17168 1.63” 1.50” 0.50” 0.067
RTI-RSPM-50 17169 1.34” 1.00” 0.73” 0.061
RTI-RSPM-50
RTI-MPLT-64
RTI-MPLT-80
2929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623www.Robo-Tool.com
24
GRIPPER ATTACHMENTS & FINGERS
PART # STOCK # L W H WEIGHT (LBS)
RTI-GMB-16 17170 0.55” 0.50” 0.50” 0.012
RTI-GF16-1 17171 1.00” 0.63” 1.50” 0.022
RTI-GF16-2 17172 0.75” 0.63” 1.50” 0.014
RTI-GMB-16: Gripper Finger Mounting Block for MCHA-16
and MCHB-16 grippers
RTI-GF16-2: Serrated Gripper Finger designed for use with
the RTI-GMB-16
RTI-GF16-1: Urethane Coated Gripper Finger designed for
use with the RTI-GMB-16
252929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623
www.Robo-Tool.com
ANGULAR PNEUMATIC GRIPPERS
Angular Pneumatic Grippers come in a range of sizes to suit every need. With the angular action, they can grip
with a variety of fingers, from a standard serration to custom made urethane fingers.
PART # L W H X1 X2 WEIGHT (LBS)
MCHA-12 28mm 16mm 54.4mm 33mm 9mm 0.117
MCHA-16 34mm 22mm 60mm 43mm 14mm 0.227
MCHA-20 45mm 26mm 72mm 54mm 18mm 0.425
MCHA-25 52mm 32mm 84mm 64mm 21mm 0.721
MCHA-32 60mm 40mm 98mm 74mm 24mm 1.157
***Add an “S” for Single Action, Spring Return option (i.e. MCHA-12S)
MCHA-12 MCHA-16 MCHA-20 MCHA-25 MCHA-32
2929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623www.Robo-Tool.com
26
PARALLEL PNEUMATIC GRIPPERS
Parallel Pneumatic Grippers come in a range of sizes to suit every need. With the parallel action, they can grip
a part in a narrow space that an angular cannot.
PART # L W H X1 X2 WEIGHT (LBS)
MCHB-12 28mm 16mm 63.5mm 27mm 21mm 0.146
MCHB-16 34mm 22mm 73.5mm 33mm 25mm 0.317
MCHB-20 45mm 26mm 88.5mm 44mm 32mm 0.562
MCHB-25 52mm 32mm 102.5mm 51mm 37mm 0.924
MCHB-32 60mm 40mm 120.5mm 59mm 43mm 1.585
***Add an “S” for Single Action, Spring Return option (i.e. MCHB-20S)
MCHB-12MCHB-16
MCHB-20
MCHB-25 and MCHB-32 also available
272929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623
www.Robo-Tool.com
LOW-HEIGHT PARALLEL PNEUMATIC GRIPPERS
MCHQ-80 MCHQ-64
PART # L W H STROKE WEIGHT (LBS)
MCHQ-64 64mm 36mm 42mm 12mm 0.617
MCHQ-80 80mm 42mm 51mm 16mm 0.992
Low-Height Parallel Pneumatic Grippers allow for low profile gripping and the ability to create “wide” capture points
with Robo-Tool’s round stock mounting block. This allows for any kind of finger to be attached to these grippers.
2929 Peach Ridge Ave. NW, Grand Rapids, MI 49534 Ph: 616-988-4622 F: 616-988-4623www.Robo-Tool.com
28
THREE-JAW PNEUMATIC GRIPPERS
MCHG-50
MCHG-64
PART # D H R MIN R MAX STROKE WEIGHT (LBS)
MCHG-50 50mm 39mm 26.5mm 30.5mm 4mm 0.487
MCHG-64 64mm 47.5mm 32mm 38mm 6mm 0.928
Three-Jaw Pneumatic Grippers are perfect for handling scenarios when three points of contact are necessary.
Whether a hole needs to be gripped from the inside, or a cone from the outside, this is the best gripper available.