Post on 16-Mar-2016
description
transcript
Ahead for Heights
Product Guide
At Euro Towers we have a very simple
philosophy. Our customers are the most
important part of our business.
As a truly independent company we are totally
dedicated to supplying our customers with
quality access products at competitive prices
with a service which is second to none.
Quality
Our products are manufactured to a TUV
approved quality management system ISO
9001:2008. Our aluminium towers are approved
to DIN BS EN 1004 European Standard.
Versatility
Our Euro Towers are available in three lengths
2m, 2.5m and 3m, and two widths 0.7m and
1.35m. Both single and double width frames are
available with two, three, four and five rung,
thus providing maximum platform options. All
frames can be used as upper or lower frames to
increase utilisation.
Euro Towers manufacture a full range of
aluminium tower parts including Bridge Beams,
High Clearance Platforms, Walk Through Frames,
Goalpost Frames, Portal Frames and Four Board
Frames. All frames are designed to increase the
versatility of the tower range.
Training
Euro Towers is a registered PASMA and IPAF
training centre offering training courses on all
aspects of access equipment safety.
Our Philosophy
With our experience and dedication to the industry, we can offer you the best, with no compromise, guaranteed…
The unique design of our ladder frame tower is
approved to DIN BS EN 1004 European Standard
and is simply the best in the industry.
Both single and double width ladder frames are
available in two, three, four and five rung sizes
to provide maximum platform options. The
tower comprises the minimum possible multi-
purpose components, no separate ladders or
guardrail frames are necessary.
All frames can be used as uppers or lowers,
simply place your platform on the third rung
below the top of the tower and the correct
guardrail height is achieved.
Unique Features
• Multi-start square threaded adjustable legs,
incorporating full nut for maximum security
• A unique heavy duty splined spigot designed
for maximum strength and rigidity and ease
of tower assembly
• A unique ten-impression crimped joint,
specially designed to improve resistance to
abuse
• Brace hook assembly, incorporating double
torsion stainless steel spring for durable and
reliable use
• Platforms incorporating bolted hook extrusion
for easy low cost repairability and platform
profile designed to provide minimum
deflection and improved strength
• Increased trapdoor opening for ease of access
• A range of trail/non trail castors and base
plates available
Ladder Frame TowersMinimise your stock holding, maximise your options and solve all your access problems…
No separate ladders or guardrail frames are necessary
Unique Features
• Approved to TUV DIN BS EN 1004 European
Standard available in two widths - 0.7m wide
single and 1.35m double
• Multi-start square threaded adjustable legs,
incorporating full nut for maximum security
• Specially designed guardrail units
manufactured using aluminium seam
welded box and standard tube
• The unique ten-impression crimped joint,
specially designed to improve resistance to
abuse, and reduce repair costs
• Platforms incorporating bolted hook extrusion
for easy low cost repairability and platform
profile designed to provide minimum
deflection and improved strength
• A range of trail/non trail castors and base
plates available
Advanced Guardrail TowerProvides collective fall prevention where the guardrails are in place before the operator accesses the platform.
Correct guardrail height achieved every time
232 TowerEnables climbable access on either side of the tower still ensuring internal access through the trapdoor 3T method.
Approved to TUV DIN BS EN 1004 European
standard and is available in two widths: single
0.7m wide and double width 1.35m wide.
The tower contains 3 types of frames, 6 rung,
8 rung and 10 rung to ensure flexibility on
different platform heights.
Unique Features
• Multi-start square threaded adjustable legs,
incorporating full nut for maximum security
• The heavy duty splined spigot designed for
maximum strength and rigidity and ease of
tower assembly
• Brace hook assembly, incorporating double
torsion stainless steel spring for durable and
reliable use
• Platforms incorporating bolted hook extrusion
for easy low cost repairability and platfrom
profile designed to provide minimum
deflection and improved strength
• Increased trapdoor opening for ease of access
• Multi rung frames for even greater versatility
Increased trapdoor opening for ease of access
Unique Features
• Safe working load 250kg
• Weight 43kg
• Working platform of 0.7m wide and
2m long
• Six optional platform levels between 0.2m
and 1.7m will suit most requirements
• Fitted with lockable 125mm castors and
non-slip platform boards
Unique Benefits
• Ideal for one man use
• Easy to assemble
• Easily portable and manoeuvrable through
standard doorways
• Ready for use in minutes
• Lightweight and robust
• Captive folding bracing system means
minimum components
• Compact storage
• Folds flat to fit into a small van or on
a roof rack
Optional Extras
• Guardrail set comprising of 2 frames and 4
braces for the unit to be used at its maximum
platform level
• Toeboard assembly - softwood or aluminium
• Non slip Kynol deck aluminium platforms
• 150mm and 200mm castors and adjustable
legs
Extensions
• Working height: 5.65m 7.55m
• Platform height: 3.65m 5.55m
Klik Fold UnitGain speed and access in tight corners where height and space is limited…
Portable and ideal for one man use
Unique Features
• Safe working load 150kg
• Weight 29kg
• Working platform of 1.5m long, 0.7m wide
and 1.7m high
• Six working levels between 0.2m and 1.7m
• Fitted with lockable 125mm castors and
non-slip platform boards
• Captive folding bracing system
Unique Benefits
• Ideal for one man use
• Easy to assemble
• Easily portable and manoeuvrable
• Ready for use in minutes
• Lightweight and robust
• C ompact storage - folds flat to fit in a small
van or on a roof rack
Optional Extras
• Guardrail set comprising of 2 frames and 4
braces for the unit to be used at its maximum
platform level
• Toeboard assembly - softwood or aluminium
• Non slip Kynol deck aluminium platforms
• 150mm and 200mm castors and adjustable
legs
Extensions
• Working height: 5.65m 7.55m
• Platform height: 3.65m 5.55m
Mini Fold UnitSmaller than the standard fold unit offering even more flexibility in confined spaces…
Lockable castors and six working levels
This unit has been designed to provide a safer
way of working at low levels.
Unique Features
• Safe working load 250kg
• Weight 35kg
• Offers four platform levels of 250mm, 500m,
750mm & 1m
• Platform area of 600mm square
• Telescopic handrail
• Lockable castors
• Non-slip platform board which can also fit
onto the side of the unit for storage when not
in use
Unique Benefits
• Minimum amount of components used
• Convenient storage size
• Folded the unit will pass through corridors
and doors with ease
Optional Extras
• Step platform for easier access to the main
board with a non-slip mesh phenol finish
• Folding toeboard assembly in softwood,
plywood or aluminium
Extensions
• Extension pack to raise the platform
level to 1.5m
Microfold 1000 Podium StepsA safe alternative to steps, ideal in confined spaces…
Provides a safer way to work at low levels
Unique Features
• Safe working load 150kg
• Structure 450kg
• Weight 51kg
• Platform level 2.7m
• Fitted with non-slip platform boards
Unique Benefits
• Easy access from both sides of stairwell unit
• Adaptable to both domestic and industrial
stairs
• Walk through frame allows use on narrow
stairs
Optional Extras
• Aluminium toeboard assembly
• Additional side props for extra support on
narrow applications
Extensions
• Extension pack to raise the platform
level from 2.7m to 4.2m from the lowest step
Stairwell Access UnitSafety and easy access are no longer a problem…
Lightweight and robust
Crimping
• Ten indent configuration to resist tension and torque loads
• Extremely strong, the casting would rupture or the tube fracture
before the joint would fail
• Under test conditions crimped joints are at least twice as durable
as a welded joint even when the crimped joint has loosened due as
a result of abuse
Euro Towers FeaturesAll items manufactered and certified to a TUV approved quality management system ISO 9001:2008
Platform
• Bolted wide hook extrusion for easy replacement
• Plywood deck with non-slip mesh phenol finish
• Heavy duty frame to give maximum strength and maximum
deflection of 9mm under test conditions
• Carbon spring steel wind lock clip as standard
Hook
• Full strength profile to reduce abuse damage
• Constant lever pressure from double torsion stainless steel spring
• Very strong and reliable, easily maintained and repaired
Spigot
• Unique cast design to give maximum strength and durability
• Splined for easy frame assembly and disassembly
• Designed to eliminate interlock clip misalignment
• Incredibly robust to withstand abuse
Plain Frames
• All frames can be used
anywhere in the tower,
no special lower, upper or
guardrail frames required
• The fine tolerance seam
welded tube used in the
main frame construction
ensures all components fit
perfectly
• All frames have four
reinforcing struts to
increase resistance to twist
and racking
Euro Towers Features
Adjustable Leg
• Rolled square thread for increased strength and durability
• Multi-start for rapid adjustment
• Very robust. Burrs caused by knocks can easily be removed without risk of
weakening leg
• Full nut ensures loading down the leg is uniform
Braces
• Colour code for ease of identification
• Seam welded tube for fine tolerance control
• Improved strength characteristics of seam welded tube, that is 10%
stronger than braces made of extruded tube
Ladder Frames
• All frames can be used
anywhere in the tower,
no special lower, upper or
guardrail frames required
• The fine tolerance seam
welded ribbed tube used
in the Ladder frame
construction provides safe
secure footing for user
confidence
• The ladder elements are
constructed from the same
seam welded tube, and
added to the frame as an H
section. This increases the
durability of the frame and
helps to prevent twisting
and racking
All items manufactered and certified to a TUV approved quality management system ISO 9001:2008
Bridging Systems
A quick and simple way of creating a bridge on two towers.
Bridge Beams are the easiest way to link two towers together
to create a very large working platform area and a long clear
span between them.
Ideal for bridging over machines, desks, pipe work runs etc.
With the use of standard ladder frames tower components,
the systems are very cost effective.
Goalpost Frames
Goalpost frames are used in areas where access is needed at
the foot of a tower, for example, a doorway, or window or
can be used if an obstacle is preventing the tower from being
constructed, such as a hedge or a working station.
High Clearance Unit
This new unit is specifically designed to be constructed over
non moveable objects such as desks, hedges, conveyers etc.
Available in lengths: 2m, 2.5m and 3m. Width is 0.70m,
Platform Level is 1.5m and Unit Height is 2.6m.
Optional extras for this unit include both softwood,
aluminium and plywood toeboard assemblies and base plates
if a fixed unit is required.
Other Products
We also manufacture a range of other products for unusual and special applications
Other Products
We also manufacture a range of other products for unusual and special applications
Klikstak UnitThis versatile unit is available as 1/4, 1/2 or full set to suit
any, or all, corners of a chimney.
This unit can be extended both down the roof to the gutter,
or upwards off the platform to access taller chimneys.
Advanced GuardrailSpecially designed guardrail frames manufactured using
aluminium seam welded box and standard tube.
The guard rails can be used in conjunction with our standard
Euro Towers Ladder Frame Towers and 232 Towers.
Fast safe assembly and disassembly.
Euro Lift
The Euro-Lift Mini 45 is the new solution to low level indoor
access; its flexible and compact design lends itself to several
special features that offer the end user an easy, simple
solution when having the need to access low level indoor
applications.
Euro Towers is a registered PASMA and IPAF
Training Centre, offering a wide variety of
industry related courses including:
PASMA - Mobile Aluminum Access Towers
IPAF - Mobile Elevating Work Platforms
Ladders, Steps and Staging Equipment and
Abrasive Wheels
PASMA Standard Course
PASMA Certificate of Competency
IPAF
Mobile Elevating Work Platforms (MEWPS)
IPAF Certification - The IPAF (International
Powered Access Federation) approved course is
recognised by CITB and HSE
• Scissor Lifts
• Self Propelled Boom Platforms
• Truck/Van Mount Platforms
• Vertical Personnel Platforms
• Safety Harness Inspection and Record
Maintenance
Ladders and Steps
This course complies with the provision and use
of Work Equipment Regulations 1998 (PUWER)
and Work at Height Regulations 2003.
For further information, contact us on
01604 644774.
Training
Experience, dedication and quality
Manufacturers of Aluminium Scaffold Tower Equipment
Unit 5 Edgemead Close Round Spinney Northampton NN3 8RG
Telephone: 01604 644774 Facsimile: 01604 499544 email: sales@eurotowers.co.uk
web: www.eurotowers.co.uk